Cpe air

Ubiquiti's LiteBeam 5AC Gen 2 directs RF energy in a tighter beam-width. With the focus in one direction, the LiteBeam 5AC Gen 2 blocks or spatially filters out noise, so noise immunity is improved. This feature is especially important in an area crowded with other RF signals of the same or similar frequency. Ubiquiti’s InnerFeed® technology integrates the radio into the feed-horn of an antenna, so there is no need for a cable. This improves performance because it eliminates cable losses. The LiteBeam AC Gen2 is a lightweight, cost effective airMAX® ac CPE with Dedicated Management Radio. It features enhanced protection against power surges and the LiteBeam 5AC Gen 2 also offers a more robust mount with separate azimuth and elevation adjustments. Specifications: Operating Frequency Worldwide: 2412 - 2462 MHz & 5150 - 5875 MHz Gain: 23 dBi Networking Interface: (1) 10/100/1000 Ethernet Port Processor Specs: MIPS 74Kc Memory: 64 MB DDR2 Power Supply: 24V, 0.3A Gigabit PoE Adapter (Included) Max. Power Consumption: 7W Power Method: Passive PoE (Pairs 4, 5+; 7, 8 Return) Supported Voltage Range: 24V ± 10% LEDs: Power, Ethernet Channel Size PtP Mode: 10/20/30/40/50/60/80 MHz Channel Size PtMP Mode: 10/20/30/40 MHz Enclosure Characteristics: Reflector (SGCC 0.6T) / Plastic: PC Mounting: Pole-Mounting Kit (Included) Wind Loading: 275 N @ 200 km/h Wind Survivability: 200 km/h ESD/EMP Protection: ± 24 kV Contact / Air Operating Temperature: -40 to 70° C Operating Humidity: 5 to 95% Non-condensing Dimensions: 358 x 271.95 x 272.5 mm Weight Without Mount: 800 g Weight With Mount: 980g

As new condition. Used for 1 month only. R800. Connects up to 16 people to the net. Huawei BM626e Feature and Specifications: * WiMAX CPE * IEEE e- Wimax Air Interface * 2.5Ghz * Built-in Smart Antenna Array * e Security for Authentication and Ciphering * Supports MIMO 2Rx2Tx * Supports WEB UI Configuration Tool * Qos Management * IEEEb/g/n Wifi Access Point

PBE-522AC by Ubiquiti incorporates a dish reflector design with proprietary airMAX® ac technology. The PowerBeam™ ac is ideal for CPE deployments requiring maximum performance. The PowerBeam ac directs RF energy in a tighter beam-width. With the focus in one direction, the PowerBeam ac blocks or spatially filters out noise, so noise immunity is improved. This feature is especially important in an area crowded with other RF signals of the same or similar frequency. Specifications: - Processor Specs: Atheros MIPS 74Kc, 560 MHz - Memory: 64 MB DDR2,16 MB Flash - Networking Interface: (1) 10/100/1000 Ethernet Port - Power Supply: 24V, 0.5A Gigabit PoE - Power Method: Passive PoE (Pairs 4, 5+; 7, 8 Return) - Supported Voltage Range: 20-26VDC - Max. Power Consumption: 5.5W - Gain: 22 dBi - Operating Frequency: 5150 - 5875 MHz - Wind Loading: 200.2 N @ 200 km/h - Wind Survivability: 200 km/h - LEDs: (1) Power, (1) LAN, (4) WLAN - Signal Strength LEDs: Software-Adjustable to Correspond to Custom RSSI Levels - Channel Sizes PtP Mode: 10/20/30/40/50/60/80 MHz - Channel Sizes PtMP Mode: 10/20/30/40 MHz - Polarization: Dual Linear - Enclosure: Outdoor UV Stabilised Plastic - Mounting: Pole-Mount Kit Included - ESD/EMP Protection: Air: ± 24 kV, Contact: ± 24 kV - Operating Temperature: -40 to 70° C - Operating Humidity: 5 to 95% Non-condensing - Dimensions: 325 x 325 x 256 mm - Weight: 1.203 kg

Please check stock availability before placing order PBE-522AC by Ubiquiti incorporates a dish reflector design with proprietary airMAX® ac technology. The PowerBeam™ ac is ideal for CPE deployments requiring maximum performance. The PowerBeam ac directs RF energy in a tighter beam-width. With the focus in one direction, the PowerBeam ac blocks or spatially filters out noise, so noise immunity is improved. This feature is especially important in an area crowded with other RF signals of the same or similar frequency. Specifications: - Processor Specs: Atheros MIPS 74Kc, 560 MHz - Memory: 64 MB DDR2,16 MB Flash - Networking Interface: (1) 10/100/1000 Ethernet Port - Power Supply: 24V, 0.5A Gigabit PoE - Power Method: Passive PoE (Pairs 4, 5+; 7, 8 Return) - Supported Voltage Range: 20-26VDC - Max. Power Consumption: 5.5W - Gain: 22 dBi - Operating Frequency: 5150 - 5875 MHz - Wind Loading: 200.2 N @ 200 km/h - Wind Survivability: 200 km/h - LEDs: (1) Power, (1) LAN, (4) WLAN - Signal Strength LEDs: Software-Adjustable to Correspond to Custom RSSI Levels - Channel Sizes PtP Mode: 10/20/30/40/50/60/80 MHz - Channel Sizes PtMP Mode: 10/20/30/40 MHz - Polarization: Dual Linear - Enclosure: Outdoor UV Stabilised Plastic - Mounting: Pole-Mount Kit Included - ESD/EMP Protection: Air: ± 24 kV, Contact: ± 24 kV - Operating Temperature: -40 to 70° C - Operating Humidity: 5 to 95% Non-condensing - Dimensions: 325 x 325 x 256 mm - Weight: 1.203 kg