Computer temperature

Description: Digital Automatic Computer Incubator Controller Temperature Humidity Controller Industrial Incubator Features: Digital displaying of temperature, humidity and turning frequency. Full automatically temperature controlling. Full automatically humidity controlling. Full automatically eggs turning. Full automatically alarming. Full automatically cooling and ventilator. Back emergency system. Specifications: Main Technical Index: Temperature Measuring Range: 0-99??/strong> Temperature Measurement Accuracy: ±0.1??/div> Humidity Measurement Range: 0-99% RH Humidity Accuracy: ±3% RH Number of signal-output: 7, (over-temperature, temperature control, insufficient temperature, egg left-turning, egg right-turning, humidity control, lighting) The maximum output load current: temperature control, insufficient temperature≤8A / AC220V, over-temperature, egg left-turning, egg right-turning, humidity control, alarm≤1A / AC22 Number of egg-turning: the maximum record is 999 times. Cycle of egg-turning: adjustment of 0 - 999 minutes (The factory default is 90 minutes) Egg-turning time: adjustment from 0 to 999 seconds (The factory default is 180 seconds) Ventilation cycle: from 0 to 999 minutes (The factory default is 120 minutes) Ventilation time: from 0 to 999 seconds (The factory default is 30 seconds) Temperature measurement line length: About 2 meters English Manual: Tells you in detail how to use, simple operation Package included: 1 x Incubator Controller 1 x English Manual 2 x Lines(Black + White) Details pictures:

Description: Temperature and humidity meter is widely used "family, laboratories, aquaculture, instrument workshops, libraries, hospitals, computer computer rooms, etc." Especially with the continuous improvement of people's living standards have air conditioning, heating into homes, hotels, restaurants, measure the ambient temperature and humidity is more important. Specification: Measuring range: Temperature: -20~50￢ﾄﾃ. Humidity: 20% RH - 100% RH The temperature below 10 1.5 less than 10 -25 1 25 1.5 Humidity of 40% RH or less 7% RH 40% RH or less -75% RH 5% RH 75% RH over 7% RH Best environmental temperature and humidity reference value: most appropriate body to give the environment: temperature 15 -25, relative humidity of 40% RH 75% RH home environment: 40% RH 70% RH libraries, art galleries, museums: 40% RH 60% RH computer computer room, communications room: 45% RH 60% RH cloth, cotton textiles store: 40% RH 60% RH dairy store: 50% RH 60% RH fruit store: 60% RH 70% RH Size: Diameter 128mm x 25mm Package included: 1 x TH101B Indoor Thermometer Hygrometer Detail Pictures:

Reduce notebook computer heat damage and extend service life. More Power Means More Heat The heat generated from today's high-performance notebook computers can place an enormous burden on their internal circuitry, batteries and other internal electronic components. With space inside the shell becoming smaller, fans must work even harder to dissipate damaging heat to maintain a safe operating temperature range. Ergonomic and Efficient Cooling Design A Manhattan Notebook Computer Cooling Pad raises the notebook for improved air circulation while the quiet fan helps cool internal components to reduce critical temperature. Its compact size and light weight make it ideal for travel. USB Convenience This eliminates the need for complicated installation and external power supplies, adapters or cables. Folds small to take with you, expands to cool notebooks up to 16" Helps reduce operating temperatures for longer life and improved performance Quiet, high-volume fan helps dissipate damaging heat Built-in USB cable eliminates need for external power supply Fits under any notebook computer – compact and lightweight for travel Fan dimensions: 70 x 70 x 10 mm Fan noise: 21 dB (maximum) Fan speed: 1500 rpm Air flow: 28 cfm Environmental Operating temperature (degrees): 0 – 40˚C (32 - 104˚F) Storage temperature (degrees): -15 – 60˚C (5 - 140˚F) Storage humidity: up to 90% non-condensing Power USB power cable: 53 cm (21 in.) Power consumptions: Operating current: 180 mA (maximum) Physical Material: plastic Color: black Dimensions folded: 130 x 130 x 23 mm Dimensions unfolded: 280 x 280 x 23 mm Weight: 128 g (4.5 oz.) System Requirements Any notebook computer with USB port

Specification: 1. Dimension(LWH): 19x16.5x15 inch 2. Holds: 6pcs graphics (video) cards 3. Holds: 1pcs motherboard(ATX/ MATX) 4. Holds: 1pcs 3.5" hard drive and 1pcs 2.5" hard drive Features: 1. Dual PSU design. 2. Stackable open air design, perfect for any type of GPU scrypt mining such as Litecoin, Dogecoin, Earthcoin, etc.     Also great for Bitcoin for ASICs. 3. Keep your video cards extra cool with this open air design. Plenty of room between cards allow airflow. 4. 6 Cooling fan included, temperature monitoring LCD panel included. Note:  This is the luxury version you will get 6 fans(3 rear and 3 front) along with the temperature monitoring kit. Frame only, no computer hardware is included, you need to get your own motherboard, memory, PSU, CPU and GPUs. Package included: 1 * ETH Miner Kit Un-assembled (6 Cooling Fan with temperature monitoring version) Delivery: Delivery to countries utilizing ePacket such as the USA, Australia, Austria, Belgium, Canada, Denmark, Finland, France, Germany, Greece, Hong Kong, Hungary, Ireland, Israel, Italy, Japan, Korea, Luxembourg, Malaysia, Mexico, Netherlands, New Zealand, Norway, Poland, Portugal, Russia, Saudi Arabia, Singapore, Spain, Sweden, Switzerland, Thailand (currently in a trial run), Turkey, Ukraine And the United Kingdom delivery can be within 7-14 days. Other countries will take 50-60 days, although we have experienced some deliveries in 30 days. Please note that there can be additional delays at customs and we can not be held accountable for such actions. Additional taxes and duties may be calculated by customs which will be for the buyer's account. Delivery is GUARANTEED, and should you not receive your order, a FULL REFUND will be made. Tracking:  For every order a tracking number will be supplied as soon as the package has been shipped. The package can be tracked on www.17track.net You can also download the mobile app where the package can be tracked and to be updated of any status changes with push notification.

19V 90w 4.74A interface 5.5*2.5 for Lenovo computer charger Desktop notebook po Package weight: 0.36 kg Features: Interface: 5.5 * 2.5 mm AC line length:1.5m Specifications: 1. Output short circuit protection 2. Overvoltage overload filter protection 3. Using imported components, high reliability 4. Good anti-interference performance 5. DC ripple is small and work efficiency is high 6. Low operating temperature and long service life 7. Good insulation performance and high electric strength 8. With short circuit, overload, over voltage protection 9. Full load high temperature burning machine, 100% aging test 10. Wide input voltage range, in line with global usage standards Click here for more deals 19V 90w 4.74A interface 5.5*2.5 for Lenovo computer charger Desktop notebook po 19V 90w 4.74A interface 5.5*2.5 for Lenovo computer charger Desktop notebook po

Features: Wi-Fi enable thermostat allows for remote access via smartphone, tablet or computer Via Mi app to open humidifier when indoor humidity is too low and open air-conditioner when indoors temperature is too high LED digital display, you can get temperature, humidity and battery power easily Built-in advanced Sensirion temperature and humidity sensor, temperature accuracy: 0.1 degrees, humidity accuracy: 0.1 percent RH Battery powered, 1 AAA battery needed and included Specification: Product Name: Xiaomi Mijia bluetooth wireless temperature and humidity sensor Product modelLYWSDCGQ/01ZM The product weight: 43 g The screen size: 1.78 inch The temperature range: -9.9 ￢ﾄﾃ ~ 60 ￢ﾄﾃ Humidity range: 0 ~ 99.9% Rated power: 0.18 mW Powered By: Batteries (AAA) x 1 How To Install and Use: After Install 'Mi Home', you need to set using local as "Mainland China", please do not select other locals. Press the "+" button at the top right corner. Choose the "Add device" option. Choose "Mi Bluetooth Hygrothermograph" and follow the instruction. Package includes: 1 x Xiaomi Mijia Bluetooth Thermometer Hygrometer 1 x wall sticker 1 x AAA battery 1 x use manual(Chinese) The Instruction book only in Chinese. It use with "Mi Home" App (this APP supports Chinese, English, Korean, Russian, Spanish). Details pictures:

Manhattan Notebook Cooling Pad with 3 Fans Retail Box Limited Lifetime Warranty. Reduce notebook computer heat damage and extend service life More power means more heat The heat generated from today's high-performance notebook computers can place an enormous burden on their internal circuitry, batteries and other internal electronic components. With space inside the shell becoming smaller, fans must work even harder to dissipate damaging heat to maintain a safe operating temperature range. Ergonomic and efficient cooling design A MANHATTAN Notebook Computer Cooling Pad raises the notebook for improved air circulation and quiet fans help cool internal components to reduce critical temperature. Its compact size and lightweight makes it ideal for travel. USB convenience This eliminates the need for complicated installation and external power supplies, adapters or cables.

Description The Orico Computer Stand is a raised ABS bracket with wheels that has been custom-designed to act as a mobile stand for your chassis. Four caster wheels ensure the convenient movement of your computer around your home or office space. When you need the stand to remain immobile, the front two wheels can be locked with conveniently placed brakes. It’s also water and smudge-proof, sturdy, durable, temperature resistant, and crush-resistant. This product features a stylish carbon fibre grain. The heightened base also keeps your chassis safe from ground-level water spills and splashes. Please note that this unit does not include the three side baffles along the edge. FEATURES: Waterproof material Durable build High temperature resistant Crush-resistant Wheeled with front brake locks Easy to carry handle SPECIFICATIONS: Material: ABS Dimensions: 23 x 44.8 x 1.5cm Weight: 460g WHAT’S IN THE BOX: Orico Computer Stand with Wheels – Black

Laptop/ Computer CPU Thermal Grease Compound Paste HY610-TU10 IF YOUR COMPUTER IS HEATING UP AND AUTO-SHUTDOWN, YOU NEED REPLACE CPU THERMAL GREASE. Features: 1) HY610 golden thermal paste (2) excellent electrical insulation (3) wide temperature range (4) high temperature quit Price R 120 EDGE Technologiez Shop 15A Next to JAM Clothings inside Berea Centre 249 Berea Road Durban

We test, repair and program car computer boxes and we can also provide you with a reprogrammed car computer boxes for your car quickly and affordably. Our testing & rebuilding process for any Bosch Motronic Computer boxes/ ECU or DME starts with a deep visual evaluation of the circuit board and all the electronic components. From water or acid corrosion, to fire or burn damage, we pay attention to every detail. We also scan the computer box/ ECU memory or CPU to make sure that it is working properly. We then test the computer box/ ECU's with our proprietary electronic lab equipment on our bench, which emulates the car's engine. We have developed a specific tester for every car brand we rebuild to ensure accuracy in every diagnosis.We replace the components that are commonly known to fail, this step guarantees the reliability and quality of the repair for the lifetime of the unit. After the unit passes all bench tests, key components are re-soldered to ensure an optimum transfer of signals and required voltages.Before the unit is put back in its cover, we paint the covers with high temperature resistant, specially formulated automotive paint, but this is optional.We also respect your time. Therefore, most units have a turnaround time of 3-5 days once we get it at our shop. We are so thorough and dedicated that we ship all computer boxes/ ECU's with a 3 month warranty. Call US OR Whatsapp today on 0813124951 for us to collect or for you to drop off your car computer box or ECU Lindelani

CJMCU-3386 MC33186DH1 Automotive Computer Board Idle Speed Throttle Drive Board Package weight: 0.00 kg Description: The 33886 is a monolithic H-Bridge ideal for fractional horsepower DC-motor and bi-directional thrust solenoid control. The IC incorporates internal control logic, charge pump, gate drive, and low RDS(ON) MOSFET output circuitry. The 33886 is able to control continuous inductive DC load currents up to 5.0 A. Output loads can be pulse width modulated (PWM-ed) at frequencies up to 10 kHz. A Fault Status output reports undervoltage, short circuit, and overtemperature conditions. Two independent inputs control the two half-bridge totem-pole outputs. Two disable inputs force the H-Bridge outputs to tri-state (exhibit high impedance). The 33886 is parametrically specified over a temperature range of -40°C ≤ TA ≤ 125°C, 5.0 V ≤ V+ ≤ 28 V. The IC can also be operated up to 40 V with derating of the specifications. The IC is available in a surface mount power package with exposed pad for heatsinking. Package included: 1 x CJMCU-3386 MC33186DH1 Automotive Computer Board Idle Speed Throttle Drive Board Click here for more deals CJMCU-3386 MC33186DH1 Automotive Computer Board Idle Speed Throttle Drive Board CJMCU-3386 MC33186DH1 Automotive Computer Board Idle Speed Throttle Drive Board

Maintaining a laptop/desktop computer is way cheaper and simpler than repairing it, there is no need for you to wait until it gives you problems or it stops working. Give your computer TLC (Tender, Love and Care) and this is how: Keep your computer case dust-free (remove dust from fans and heat-sink) Clean your PC mouse and keyboard Clean your PC Monitor Clean the laptop case (remove dust from fans and heat-sink) Clean the laptop keyboard Clean the Laptop LCD screen Keep your laptop operating at a safe temperature Test your laptop’s battery Free space on your hard drive Defragment your data to make your hard drive perform faster Update applications software We can do all of this for only R150. Do not wait, call us on: ( and our technician will be at your door steps.

Description:   220V 25A LCD Digital Micro Computer Programmable Time Clock Timer Switch Relay   Features:    This product automatically switch on/off the power of electric appliances and instruments according to the time set by user. It could control the street lamp, neon light, ad led light, factory production equipments, radio & TV devices which are required to open/stop.   Specification:   Standard operating power 220V Applicable power range 160-240V Switch volume resistive load 25A, inductive load 20A Power consumption The time control range: 1min to 168hours 8 groups of switch time, manual/automatic operation Counter time mistakes environment temperature -25~60°C Relative humidity Dimension: 120mm*74mm*53mm Color:White&blue Weight: 286g   Package includes:    1 x 220V LCD Digital Micro Computer Programmable Timer Switch 1 x User Manual    Details pictures: 

Description Giada D610 I3 10110U 2xDDR4 2400Mhz Embedded Computer The Giada DF610 i3-10110U Comet Lake High-end Fanless Player is an embedded computer and is ideal for signage player applications in hospitality, retail, commercial, service and advertising roles. Its compact and powerful design brings organizations all the performance and efficiency of the Intel®Core™ i3-10110U CPU, plus one HDMI port and a DisplayPort output with up to 4K resolution support. Its HDMI, DisplayPort, USB ports, gigabit LAN, Windows and Linux OS support, and support for M.2 SSDs and mini-PCIe 3G, and 4G cards make it very versatile. It can also be mounted in various ways thanks to its VESA mount support and can easily be hidden behind a monitor or large format display. SPECIFICATIONS: Processor: CPU: Intel(R) Core™ i3-10110U BIOS: AMI Source Code Chipset: SOC Memory: Type: DDR4-2400MHz Socket: 2 x SO-DIMM Max Size: 32GB Graphics: GPU: Intel® 10th Gen. UHD Graphics Graphic Engine: Direct3D 2015, OpenGL 4.5, OpenCL 2.1 DP: 1 x DP (Max.4096 x 2304 @60Hz) HDMI: 1 x HDMI (Max.4096×2304 @60Hz) Network: Controller: 2 x Realtek 8111G Gigabit Ethernet Interface: 2 x RJ45 I/O: USB: 5 x USB 3.2 Gen2 (10 Gbps) Serial Port: 1 x RS232 Audio: 1 x AUDIO-OUT, 1 x MIC-IN Mini-PCIe: 1 x Full-size Mini-PCIe for mSATA/WiFi/3G/4G M.2(2230): 1 x M.2(2230) for WiFi SIM: 1 x SIM Slot Storage M.2: 1 x M.2(2242/2280) for SSD JAHC Tech: WatchDog Timer: 0~255 Second Time Out Support Auto Power On Power Activated Automatically Start Remote Control: By IR Controller for Power On RTC: Set Up Independently Every day, A Week as a Cycle Wake On Lan: Yes Operating System: Windows: Windows 10（64-Bit） Linux: Support Power: Power Type: DC-IN Input Voltage: 19V / 3.42A Environment: Operating Temperature: 0℃ ~ 40℃ (32 ℉ ~ 104 ℉) at 0.7m/s Air Flow Relative Humidity: 95%@40℃ (non-condensing) Certification: CE, FCC Class B, CCC Mechanical: Construction: Metal Mounting: Desk/Wall Mounting and VESA Mounting Kit (JZ300) Colour: Black Product Dimensions: 18.9 x 14.8 x 2.6 cm WHAT’S IN THE BOX: Giada DF610 i3-10110U Comet Lake High-end Fanless Player x1 WiFi Antenna x2 User Manual x1

Giada D610 I3 10110U 2xDDR4 2400Mhz Embedded Computer The Giada DF610 i3-10110U Comet Lake High-end Fanless Player is an embedded computer and is ideal for signage player applications in hospitality, retail, commercial, service and advertising roles. Its compact and powerful design brings organizations all the performance and efficiency of the Intel®Core™ i3-10110U CPU, plus one HDMI port and a DisplayPort output with up to 4K resolution support. Its HDMI, DisplayPort, USB ports, gigabit LAN, Windows and Linux OS support, and support for M.2 SSDs and mini-PCIe 3G, and 4G cards make it very versatile. It can also be mounted in various ways thanks to its VESA mount support and can easily be hidden behind a monitor or large format display. SPECIFICATIONS: Processor: CPU: Intel(R) Core™ i3-10110U BIOS: AMI Source Code Chipset: SOC Memory: Type: DDR4-2400MHz Socket: 2 x SO-DIMM Max Size: 32GB Graphics: GPU: Intel® 10th Gen. UHD Graphics Graphic Engine: Direct3D 2015, OpenGL 4.5, OpenCL 2.1 DP: 1 x DP (Max.4096 x 2304 @60Hz) HDMI: 1 x HDMI (Max.4096×2304 @60Hz) Network: Controller: 2 x Realtek 8111G Gigabit Ethernet Interface: 2 x RJ45 I/O: USB: 5 x USB 3.2 Gen2 (10 Gbps) Serial Port: 1 x RS232 Audio: 1 x AUDIO-OUT, 1 x MIC-IN Mini-PCIe: 1 x Full-size Mini-PCIe for mSATA/WiFi/3G/4G M.2(2230): 1 x M.2(2230) for WiFi SIM: 1 x SIM Slot Storage M.2: 1 x M.2(2242/2280) for SSD JAHC Tech: WatchDog Timer: 0~255 Second Time Out Support Auto Power On Power Activated Automatically Start Remote Control: By IR Controller for Power On RTC: Set Up Independently Every day, A Week as a Cycle Wake On Lan: Yes Operating System: Windows: Windows 10（64-Bit） Linux: Support Power: Power Type: DC-IN Input Voltage: 19V / 3.42A Environment: Operating Temperature: 0℃ ~ 40℃ (32 ℉ ~ 104 ℉) at 0.7m/s Air Flow Relative Humidity: 95%@40℃ (non-condensing) Certification: CE, FCC Class B, CCC Mechanical: Construction: Metal Mounting: Desk/Wall Mounting and VESA Mounting Kit (JZ300) Colour: Black Product Dimensions: 18.9 x 14.8 x 2.6 cm WHAT’S IN THE BOX: Giada DF610 i3-10110U Comet Lake High-end Fanless Player x1 WiFi Antenna x2 User Manual x1

Specs: Flip up type handle Front Temperature Monitor Power Supply: Not Included 5.25 Bay: 2 3.5 HDD Bay: 3 2.5 SSD Bay: 0 Front USB & Audio: Yes Transparent Side: NA Top Fan: NA Front Fan: NA Side Fan: 1 x 18cm Side Mesh Cover (Included,Blue color) Rear Fan: 1 x 8cm (Included) Bottom Fan: NA Water Cooler: Not Supported M/B Support: ATX, M-ATX

Canon Pixma TS3340 A4 3-in-1 Colour ink Printer Black, USB, WiFi Canon Pixma TS3340 A4 3-in-1 Colour ink Printer Black, A4 MFP, Print, Copy, Scan, 7.7ipm mono, 4.0ipm Colour, 4800×600 print Resolution, 60 sheet rear tray, Manual duplex, USB, Wi-Fi, Access mode – 4 ink system, Black and Tri ink (C M Y), 3771C007AA, CIS Flatbed photo and Document Scanner, 600 x 1200 dpi scan Resolution, 3.8cm LCD segment mono Display Overview: PIXMA TS3340 Affordable, stylish and functional, this connected all-in-one is the go-to tool for crisp documents and borderless photos up to 5″x7″. Features: More than a multifunctional Compact, affordable and comprehensive, the PIXMA TS3340 boasts seamless wireless connectivity, a straightforward 1.5″ mono LCD and FINE cartridges with XL options for sharp document text and vivid borderless photos up to 5″x7″. Compact and connected Enjoy multifunctionality and smooth wireless connectivity. Print, scan and connect to the cloud* via the Canon PRINT app or get printing with AirPrint (iOS) and Mopria (Android). * Scan to cloud is only available to genuine Canon ink users. Print more Enjoy the convenience of FINE cartridges and extend time between ink top-ups with optional XL replacements. Simple set-up With wireless connectivity at the touch of a button, intuitive 1.5″ mono LCD and even easier set-up, it’s never been simpler to get started. Specifications: Product Code CTS3340 General Specifications Functions Wi-Fi, Print, Copy, Scan, Cloud Print Specifications Print Resolution Up to 4800 x 1200 dpi Print Technology 2 FINE Cartridges (Black and Colour) Mono Print Speed Approx. 7.7 ipm Colour Print Speed Approx. 4.0 ipm Photo Print Speed Borderless 10x15cm: Approx. 65 seconds Borderless Printing Yes (13x18cm, 10x15cm, 13x13cm) Two Sided Printing Manual operation Cartridges And Yields Standard Ink Cartridges PG-445 (Black) CL-446 (Colour) Optional XL Ink Cartridges PG-445XL (Black) CL-446XL (Colour) Cartridge Yield (Plain paper) A4 colour documents printing Black: 180 pages Black XL: 400 pages Colour: 180 pages Colour XL: 300 pages Ink Tanks Yield (Photo print) 10x15cm photo Black: 1445* photos Black XL: 3520* photos Colour: 55 photos Colour XL: 90 photos * Estimated supplemental yield Paper Types Plain Paper Envelopes Photo Paper Plus Glossy II (PP-201) Photo Paper Glossy “”Everyday Use”” (GP-501) Removable Photo Stickers (RP-101) Magnetic Photo Paper (MG-101) Maximum Paper Input Rear tray: Max. 60 sheets (plain paper) Paper Sizes Plain paper: A4, A5, B5, Letter, Legal Photo paper: 13x18cm, 10x15cm, 13x13cm [Custom size] width 89 mm – 215.9 mm, length 127 mm – 676 mm Paper Weight Plain paper: 64 – 105 g/m² Canon photo paper: up to 275 g/m² Scan Specifications Scanner Type CIS flatbed photo and document scanner Scanner Resolution (Optical) 600 x 1200 dpi Scanning Depth (Input / Output) Colour: RGB each 16bit/8bit Greyscale: 16 bit / 8 bit Maximum Document Size 216 x 297 mm Copier Specifications Copy Speed sFCOT: Approx. 27 sec sESAT: Approx. 3 ipm Multiple Copy 20 copies (max.) Copy Functions Document copying, Borderless copy Copy Zoom Fit to page Document size 216 x 297 mm Interface Display Type b'&' Size 3.8cm LCD segment mono Interface Type – PC / Mac Hi-Speed USB (B Port) Wi-Fi: IEEE802.11 b/g/n Wi-Fi Security: WPA-PSK, WPA2-PSK, WEP, Administration password Wireless LAN Frequency Band: 2.4GHz Interface Type – Other Canon PRINT Inkjet/SELPHY app Easy-PhotoPrint Editor Message In Print app PIXMA Cloud Link Canon Print Service Plugin (Android) Google Cloud Print Apple AirPrint Access Point Mode WLAN PictBridge Mopria (Android) Software Supported Operating Systems Windows 10, Windows 8.1, Windows 7 SP1 Operation can only be guaranteed on a PC with pre-installed Windows 7 or later. OS X 10.11.6, macOS 10.12~macOS 10.14 Supported Mobile Systems iOS, Android, Windows 10 Mobile Minimum System Requirements Windows: 2.0GB or more Mac: 1.0GB or more Note: for bundled software installation. The necessary amount of hard disk space required. Display: 1024 x 768 XGA Software Included MP Driver including Scanning Utility Easy-PhotoPrint Editor (download) Physical Features Weight approx. 3.9 kg Dimensions (W x D x H) approx. 435 x 316 x 145 mm Acoustic Noise Levels approx. 53.5dB(A) Recommended Operating Environment Temperature: 15-30°C Humidity: 10-80%RH (no dew condensation) Power Source AC 100-240V, 50/60Hz Power Consumption Off: Approx. 0.3W Standby (connected to PC via USB): Approx. 1.7W (scanning lamp off) Standby (all ports connected): Approx. 1.7W (scanning lamp is off) Time to enter Standby mode: 10min 38sec Copying: Approx. 11W

Arctic F8 TC 80mm Case Fan-Fluid Dynamic Bearing, RPM,31CFM,22.5dBA,Rubber Mounts +Temperature Control Design Product Overview The Arctic F8 TC is a temperature controlled case fan, keeping your computer temperature at optimal level without any further setup or monitoring. The Arctic F8 TC controls its speed by itself. Thanks to the temperature sensor, all you need to do is to install the fan. No further adjustments or setup is required. The fan controller is set to keep the temperature between 32°C and 38°C. When the temperature is below 32°C, the fan spins slowly and silently. If the temperature continues to rise, the fan speed will increase to deliver maximum airflow, and in turn cooling the PC more efficiently. Equipped with nine blades to efficiently create high airflow and static pressure, the Arctic F8 TC fan is perfect for PC case ventilation. Additionally, the fluid dynamic bearing extends the service life of the fan. The temperature sensor of the fan is installed on a 40cm cable. This gives you great flexibility to install the sensor in a spot that emits most heat. Ideally the sensor is installed at the top of the PC case, since the temperature is highest in this area. Also the fan can be installed as either as intake or outtake. Features • 40 cm long temperature sensor for accurate fan speed control • Extremely quiet • High airflow and static pressure • Low noise impeller • Fluid dynamic bearing extends service life Specifications • Fan Type Case Fan with Temperature Control    • Fan Size 80mm         • Bearing Type Fluid Dynamic         • RPM RPM         • Air Flow CFM         • Noise Level 22.5 dBA         • Voltage 12 V         • Current 0.16 A         • Heatsink Dimensions 80 L x 80 W x 25 H mm

Arctic F9 TC 92mm Case Fan-Fluid Dynamic Bearing, RPM,43CFM,23.5dBA,Rubber Mounts +Temperature Control Design Product Overview The Arctic F9 TC is a temperature controlled case fan, keeping your computer temperature at optimal level without any further setup or monitoring. The Arctic F9 TC controls its speed by itself. Thanks to the temperature sensor, all you need to do is to install the fan. No further adjustments or setup is required. The fan controller is set to keep the temperature between 32°C and 38°C. When the temperature is below 32°C, the fan spins slowly and silently. If the temperature continues to rise, the fan speed will increase to deliver maximum airflow, and in turn cooling the PC more efficiently. Equipped with nine blades to efficiently create high airflow and static pressure, the Arctic F9 TC fan is perfect for PC case ventilation. Additionally, the fluid dynamic bearing extends the service life of the fan. The temperature sensor of the fan is installed on a 40cm cable. This gives you great flexibility to install the sensor in a spot that emits most heat. Ideally the sensor is installed at the top of the PC case, since the temperature is highest in this area. Also the fan can be installed as either as intake or outtake. Features • 40 cm long temperature sensor for accurate fan speed control • Extremely quiet from only 0.04 Sone • High airflow and static pressure • Low noise impeller • Fluid dynamic bearing extends service life Specifications • Fan Type Case Fan with Temperature Control    • Fan Size 92mm         • Bearing Type Fluid Dynamic         • RPM RPM         • Air Flow CFM         • Noise Level 23.5 dBA         • Voltage 12 V         • Current 0.16 A         • Heatsink Dimensions 95 L x 95 W x 37 H mm  

Specifications 1.Power Rating: 3000W 2.Rated voltage: 220V 10A 3.Rated frequency: 50 / 60Hz 4.Rated pressure: 0MPa 5.Working pressure: 0.04-0.3MPa 6.Waterproof grade: IPX4 7.Size:390*70mm Features 1. Automatic reset over temperature protection 2. Water tube can be 180 degrees to 360 degrees free rotation. easy to use 3. A must kitchen accessory for housewives: your hands won't feel cold when washing dishes 4. Made of ABS engineering plastics, high temperatures resistant, soft and strong, not easy to burst and high shape stability 5. Computer temperature control 6. Double water separation structure 7. Automatic flow switch 8. Anti-dry,anti-overheating, Anti-overpressure 9. Fast heat technology 10. Leakage protection, automatic power-off Installation 1. Fixed the faucet in the sink table 2. Access to water, tighten the nut Package Included 1 x Electric Water Faucet(A free adapter will be send according to your country) Notes: The first use should be water after the first power Use the maximum water temperature does not exceed 60 ¿¿¿ Pull the handle to the hot water, the heating indicator light to start heating, rotating to cold water, stop heating Please test before using the leakage protector can work properly (test method: press the reset button after power, power indicator light, and then press the experimental key, hear the click after the light is off, indicating normal)

TEMPerHUM USB Thermometer Hygrometer -40~+85 Hid Remote Temperature Humidity Re Package weight: 0.14 kg Description: ￢ﾖﾺHid TEMPerHUM thermometer & hygrometer is a measurement device using USB port to connect to a computer. ￢ﾖﾺIt can measure the temperature and the humidity of the machine and the environment accurately and can calculate the dewpoint automatable. ￢ﾖﾺIt must be connect to the computer to start working. ￢ﾖﾺHid TEMPerHUM can be used in computer room, weather, environment and special environment temperature and humidity testing. Feature: •Data autosave to be txt Or csv format, can be open by excel; •Send mails function •Graph transfer function •TXT Special button: As long as you long pressing the TXT button for 1 second, you can read the temperature and humidity no matter in excel, text or word form without running software. If to stop the reading, press the TXT button again. Easy operation! Solve your installed software and cross-platform used troubles! •Caps lock and Number Lock: You don’t want to install software, OK! You can use the Caps lock and Num lock function. As long as you long press the caps lock or Num lock for 3 seconds, you can read the temperature and humidity no matter in excel, text or word form without running software. Then you can create curve. •PCsensor USB series products, can be used on the mobile phone through OTG interface line. Specification: Range of temperature: TEMPerHUM -40~+85 C; -40~+185F; Resolution rate of temperature: 0.06C Temperature sensor: (1) +/- 0.5C accuracy (Typical) (2) +/-1C accuracy (Maximum @ 0 to 70C) Range of humidity: 0~100RH% Resolution rate of humidity: 0.03RH%; Precision of humidity: +/- 4.5 RH% 20RH%~80 RH%; Voltage: 4~6V; Electricity: Voltage: 5V Support Windows N'T,XP, VIST; Memory requirement: 20M Package includes: 1 x USB Thermometer 1 x USB Cable 1 x CD Detail pictures: Click here for more deals TEMPerHUM USB Thermometer Hygrometer -40~+85 Hid Remote Temperature Humidity Re TEMPerHUM USB Thermometer Hygrometer -40~+85 Hid Remote Temperature Humidity Re

A professional weather station that features a clock, barometer, indoor and outdoor temperatures, humidity, aerology and a rain gauge. Features: Hour and date Radio-controlled clock (Frankfurt antenna / DCF-77 Signal - EU/UK only) DCF-77 ON/OFF function (Manual setting function) for South African use. 12 or 24 hour display Time zone: +/- 12 hours Day / date / month display Indoor temperature Unit: °C or °F Range: from – 9.9 °C to + 59.9 °C Precision: 0.1 °C Recording of the minimum and maximum temperature measured with time and date 15 second measuring period Indoor humidity Unit: % RH Swiss made high definition sensor Range: from 1 % to 99 % Precision: 1% Accuracy: +/- 3 % Recording of the minimum and maximum humidity measured with time and date 30 second measuring period Forecast Barometer with icon display Trend display Atmospheric pressure Unit: hPa or inHg Range: from 300 hPa to hPa Relative pressure (from 920 hPa to hPa) Pressure sensitivity level setting Recording of the minimum and maximum data measured with time and date Outdoor temperature Unit: °C or °F Range: from – 29.9 °C to + 69.9 °C Precision: 0.1 °C Recording of the minimum and maximum temperature measured with time and date Outdoor humidity Unit: % RH Swiss made high definition sensor Range: from 1 % to 99 % Precision: 1% Accuracy: +/- 3 % Recording of the minimum and maximum humidity measured with time and date Dew point Dew point display Recording of the minimum and maximum data measured with time and date Wind speed and Wind direction Unit: km/h, m/s, knots, mph or Beaufort Range: from 0 to 180 km/h (or from 1 to 49.9 m/s) Wind direction displayed on a 360° compass Recording of the minimum and maximum data measured with time and date Windchill Windchill display Recording of the minimum and maximum data measured with time and date Rain Display of precipitation: over 1 hour, 24 hours or total volume Unit: mm or inch Range: - from 0 to mm (over 1 or 24 hours) - And from 0 to mm (on the total rain volume) Precision: 0.5 mm Rainfall per impuls: mm Recording of the minimum and maximum data measured with time and date Alarms 21 alarm setting (high and low): - clock alarm - storm alarm (sound alarm possible) - indoor temperature alarm (high and low) - outdoor temperature alarm (high and low) - indoor humidity alarm (high and low) - outdoor humidity alarm (high and low) - wind chill alarm (high and low) - dew point alarm (high and low) - precipitation alarm over 24 hours and over 1 hour - relative pressure alarm (high and low) - wind speed alarm (high and low) - wind direction alarm PC connection Computer connection included Delivered with setup CD-ROM (in French, English and German) and one 2 metre cable for linking the base station and the computer (USB) Data is gathered by the computer, which can be used to create graphs or to export it Storage capacity of 175 sets of data Outdoor transmitter 433 MHz wireless or cable-based transmission 433 MHz Transmission distance: 100 metres (in open field) Transmission distance by cable: 10 metres (however an extra 10 metres can be added) Frequencies For 433 MHz transmission: - if the wind speed is greater than 10 m/s, every 32 seconds - if the wind is less than 10 m/s, every 128 seconds - Or every 10 minutes if the station fails to receive any data after 5 attempts in a row (all outdoor data readings will display “---“ except for the rain value) If the transmission is by cable, every 8 seconds LCD contrast LCD contrast adjustable from +1 to +8 LED backlight LED BACKLIGHT Supplied with: outdoor temperature and humidity transmitter rain gauge anemometer cables to link transmitters Dimensions: Station (L x W x H) = 118 x 30.5 x 178 mm Thermo/hygro transmitter (L x W x H) = 71.5 x 73 x 136 mm Rain gauge (L x W x H) = 140 x 70 x 137 mm Anemometer (L x W x H) = 250 x x 77.9 mm Power Supply: 3 x AA batteries for station 2 x AA batteries for the thermo/hygro transmitter Supplied with comprehensive user guide

Manhattan Notebook Cooling Pad-USB Pass-through, Single Fan, 200 mm -Fits most notebook computers up to 17", Retail Box, Limited Lifetime Warranty Reduce notebook computer heat damage and extend service life. Product Overview The heat generated from today's high-performance notebook computers and batteries can place an enormous burden on their internal circuitry, batteries and other internal electronic components. With space inside the shell becoming smaller, fans must work even harder to dissipate damaging heat to maintain a safe operating temperature range. A MANHATTAN Notebook Computer Cooling Pad raises the notebook for improved air circulation, and quiet fans help cool internal components to reduce critical temperature. USB connectivity provides quick and easy installation and operation, eliminating the need for complicated installation and external power supplies, adapters or cables. The pass-through feature maintains access to USB power for the connection of other devices. Features • Helps reduce operating temperatures for longer life and improved performance • Large, quiet, high-volume fan helps dissipate damaging heat • USB pass-through connection keeps port available for other devices • Fits most notebook computers up to 17" Specifications • Fans: (1) • Fan dimensions: 200 x 200 x 20 mm (7.8 x 7.8 x 0.8 in.) • Air flow: 45 cfm • Fan noise: • Fan speed: 600 rpm Environmental: • Operating temperature (degrees): 0 – 40°C • Storage temperature (degrees): -°C • Storage humidity: up to 90% non-condensing Power: • USB power cable: 53 cm (21 in.) • Power consumption: 5 V +/- 50% • Operating current: 450 mA (maximum) Physical: • Material: plastic • Color: black • Dimensions: 299 x 286 x 41 mm (11.8 x x 1.6 in.) • Weight: 255 g (9 oz.) System requirements: • PC or Mac notebook computer with USB port Package contents: • Notebook Cooling Pad

Description: GM8908 Pocket Size Digital LCD Wind Speed Gauge Meter Anemometer Thermometer Beaufort scale. Measure wind speed and temperature. Data hold function. Wind chill indication. Auto/ manual power off.   Low battery indication. High precision pressure sensor. ????Temperature unit selection. Quick response, external thermistor. Air Velocity & Temperature Measurement. Enclosed is a neck strap, convenient to carry. Large easy-to-read LCD display with backlight. Current/ Max/ Average wind speed reading(Air velocity measurement). You can use it for industrial and home purposes such as measuring wind speed and temperature of CPU computer fans, air-conditioners, air blower etc. This handy palm sized anemometer is ideal for weather enthusiast, lovers of kite flying, sailing, fishing, mountaineering, kite-surfing, wind-surfing, paragliding and sailors. Temperature display in ????/span> Specifications: Accuracy ±5% Net Weight 55g Package weight 109g Cable Length 52cm Color Orange, black Wind speed range 0-30m/s Thermometer NTC thermometer Current consumption About 3mA Operating humidity less than 90%RH Powered supply 1 x 3V CR2032 battery Storage temperature -40~60?¿¿¿¿? -40~140F Operating temperature -10~45?¿¿¿¿?(14~113F) Dimension Approx.10.4(L) x 5.8(W) x 2.0(H)cm Wind speed unit m/s, Km/h, ft/min, Knots, mph Wind temperature range -10 - 45°C (14-113°F) Air Temperature: -Range: -10 - 45?¿¿¿¿? 14 - 113F -Resolution: 0.2?¿¿¿¿? 0.36F -Accuracy: ±2?¿¿¿¿? ±3.6F Air Velocity: -Range: 0 - 30m/s, 0 - 90km/h, 0 - 5860ft/min, 0 - 65mph, 0 - 55Knots -Resolution: 0.1m/s, 0.3km/h, 19ft/min, 0.2mph, 0.2Knots -Threshold: 0.1m/s, 0.3km/h, 39ft/min, 0.2mph, 0.1Knots Package included: 1 x GM8908 Digital anemometer 1 x Neck strap 1 x English User Manual Details Pictures:

GM8901 Portable LCD Digital Anemometer Wind Speed Meter Air Velocity Air Temperature Meter Tester Measuring 0~45m/s   This multifunction anemometer provides instant data such as Air Speed and Temperature in Dual Level LCD display with Backlight. This tool has wide measuring range of wind speed from 0 ~ 45 m/s (0 ~ 8800 ft/min)and temperature from 0 ~ 45¿¿¿ (32 ~ 113 F).   This weather device is an ideal tool for windsurfing, sailing and kite flying. You can also use it for industrial and home purposes such as measuring speed and temperature of CPU computer fans, air-conditioners, airflow over the roof or walls.   Features:   Simultaneous measure and display Air Velocity & Temperature. Digital Thermometer with range 0 ~ 45 ¿¿¿(32 ~ 113 F). Fast Air Speed measure range: 0 ~ 45 m/s (0 ~ 8800 ft/min). Multiple SI units: m/s, km/h, ft/min, mph, or knots. Wind speed is also displayed in a Beaufort wind scale bar graph.   Display options in wind speed mode are current wind speed, maximum and minimum wind. speed, and average wind speed. Wind chill is displayed in the selected temperature unit. Switchable between ¿¿¿ or F. Built-in rotating vane sensor and Backlight. Guaranteed quick response & accurate readings, no guessing errors. Auto/Manual power-off with low battery warning.   Specification: Air velocity Unit Range Resolution Threshold Accuracy M/s 0-45 0.1 0.3 3% 0.1dgts Ft/min 0-8800 19 60 3% 10dgts Knots 0-88 0.2 0.6 3% 0.1dgts Km/hr 0-140 0.3 1 3% 0.1dgts Mph 0-100 0.2 0.7 3% 0.1dgts Tmperature Unit Range Resolution Accuracy C 0¿¿¿-+45¿¿¿ 0.2 2C F 32F-113F 0.36 3.6F Power Supply 9V battery(Not  included) Operation temperature -10¿¿¿---+50¿¿¿(14F-122F) Operating humidity 40%RH-85%RH Store temerature -20C---+60C(-4F-140F) Store humidity 10%RH---90%RH Package information Dimension Main unit:145 x 72 x 35mm Vane:172 x 65 x 29mm Weight 276G Package included:   1 x GM8901 Portable LCD Digital Anemometer  1 x Sensor Vane Probe (Connected to Main Unit) Details pictures:  

Description: GM8901 Portable LCD Digital Anemometer Wind Speed Meter Air Velocity Air Temperature Meter Tester Measuring 0~45m/s This multifunction anemometer provides instant data such as Air Speed and Temperature in Dual Level LCD display with Backlight. This tool has wide measuring range of wind speed from 0 ~ 45 m/s (0 ~ 8800 ft/min)and temperature from 0 ~ 45℃ (32 ~ 113 F). This weather device is an ideal tool for windsurfing, sailing and kite flying. You can also use it for industrial and home purposes such as measuring speed and temperature of CPU computer fans, air-conditioners, airflow over the roof or walls. Features: Simultaneous measure and display Air Velocity & Temperature. Digital Thermometer with range 0 ~ 45 ℃(32 ~ 113 F). Fast Air Speed measure range: 0 ~ 45 m/s (0 ~ 8800 ft/min). Multiple SI units: m/s, km/h, ft/min, mph, or knots. Wind speed is also displayed in a Beaufort wind scale bar graph. Display options in wind speed mode are current wind speed, maximum and minimum wind. speed, and average wind speed. Wind chill is displayed in the selected temperature unit. Switchable between ℃ or F. Built-in rotating vane sensor and Backlight. Guaranteed quick response & accurate readings, no guessing errors. Auto/Manual power-off with low battery warning. Specification: Air velocity Unit Range Resolution Threshold Accuracy M/s 0-45 0.1 0.3 3% 0.1dgts Ft/min 0-8800 19 60 3% 10dgts Knots 0-88 0.2 0.6 3% 0.1dgts Km/hr 0-140 0.3 1 3% 0.1dgts Mph 0-100 0.2 0.7 3% 0.1dgts Tmperature Unit Range Resolution Accuracy C 0℃-+45℃ 0.2 2C F 32F-113F 0.36 3.6F Power Supply 9V battery(Not included) Operation temperature -10℃---+50℃(14F-122F) Operating humidity 40%RH-85%RH Store temerature -20C---+60C(-4F-140F) Store humidity 10%RH---90%RH Package information Dimension Main unit:145 x 72 x 35mm Vane:172 x 65 x 29mm Weight 276G Package included: 1 x GM8901 Portable LCD Digital Anemometer 1 x Sensor Vane Probe (Connected to Main Unit) Details pictures:

Manhattan USB 3.0 Gigabit Adapter - 10/100/1000 Mbps Gigabit Ethernet, SuperSpeed USB 3.0, Retail Box, 2 year Limited Warranty Product Overview The Manhattan USB 3.0 Gigabit Adapter is a compact, high-performance network adapter that allows you to upgrade your desktop or notebook computer to operate at 10/100/1000 Mbps speeds on the LAN. Because it attaches to one of your computer’s USB connectors, there is no need to open up your PC — and the user-friendly setup software makes installation quick and easy. Faster Throughput through SuperSpeed USB 3.0 Other USB Gigabit adapters that only support USB 2.0 cannot even come close to the performance levels of this latest generation high-performance network adapter, since they are limited by the USB 2.0 bus design to a theoretical maximum of 480 Mbps. The Manhattan USB 3.0 Gigabit Adapter knows no such limitations and delivers true gigabit performance without compromises. Auto-Negotiation The USB 3.0 Gigabit Adapter will automatically detect the network speed that the LAN switch port is set to and run at the same speed. The adapter supports 10Base-T Ethernet, 100Base-TX and 1000Base-T Gigabit Ethernet. Full Duplex When running in full duplex mode, the USB 3.0 Gigabit Adapter connects at the following link speeds: 20 Mbps (10Base-T Ethernet), 200 Mbps (100Base-TX Fast Ethernet) and 2 Gbps (1000Base-T Gigabit Ethernet). Portable Design The USB 3.0 Gigabit Adapter is compact and can be easily used from one computer to another or transferred in your notebook case as you travel. It doesn’t take up a lot of space, and doesn't add clutter to your workspace. Features •Upgrade your notebook or desktop computer to full gigabit speeds •Quick and reliable sharing of large files over your network •Supports SuperSpeed USB 3.0 interfaces and is downward compatible to High-Speed USB 2.0 and USB 1.1 •Hot-swappable (no need to power down) •Full duplex with auto-speed detection •Supports the most popular operating systems: Windows XP, Vista and Windows 7/8 •Compatible to Mac OS X •Low power consumption via a USB bus Specification s •USB type-A connector •RJ45 connector •USB bus-powered •Operating mode: 420 mA •Suspend mode: 38 mA •Dimensions: 97 (L) x 23 (W) x 15 (H) mm •Weight: 145 g Standards •USB Specification version 3.0 •USB Specification version 2.0 •USB Specification version 1.1 •USB Specification version 1.0 •IEEE 802.3 (10Base-T Ethernet) •IEEE 802.3u (100Base-TX Fast Ethernet) LEDs •Link •10/100/1000 Mbps Environmental •Operating temperature: 0 – 40°C (32 – 104°F) •Storage temperature: -10 – 80°C (14 – 176°F) •Storage humidity: 5 – 85%, non-condensing System Requirements •Desktop or laptop system with USB 1.1, USB 2.0 or USB 3.0 port •Windows XP/Vista/Windows 7/8, Mac OS 10.6 and later Package Contents •SuperSpeed USB 3.0 to Gigabit Ethernet Adapter •Setup CD •Instructions

Description Tenda 150Mbps Auto-Install Wireless Nano USB Adapter With a mini and portable exterior, the Tenda 150Mbps Wireless Nano USB Adapter fits securely into your computer and has no effect on the usage of neighbouring ports. It contains an internal driver, which allows automatic installation as soon as it is connected to a computer. Therefore, you do not need to manually install the driver with a CD-ROM or a file downloaded from the internet. It is compatible with many operating systems to address various user requirements for wireless internet connectivity. Auto-Install, Configuration-free With an internal drive, W311MI can automatically complete installation once plugged into your computer, releasing you from troublesome configuration, and installation using CD or drive. Mini exterior for portability With a mini and portable exterior and hard-to-shed design, W311MI is unnoticeable on your computer and has no effect on the usage of neighbouring ports. Compatible with various operating systems W311MI is compatible with Windows XP, Windows 7, Windows 8, Windows 8.1 and Windows 10 etc., satisfying the wireless internet connection demands of desktop computers, notebooks and other devices. Specifications Interface USB2.0 Dimension 21mm × 15mm × 7.7mm(L*W*H) Antenna Internal Antenna Wireless Standards IEEE 802.11b, IEEE 802.11g, IEEE 802.11n Frequency 2.400 ~ 2.4835GHz Signal Rate 11b: Up to 11Mbps (dynamic) 11g: Up to 54Mbps (dynamic) 11n: Up to 150Mbps (dynamic) Transmit Power b' Wireless Mode Station Mode Wireless Security 64/128-bit WEP,WPA-PSK / WPA2-PSK,WPA / WPA2 Channel 1 ~ 13 Package Content Wireless Adapter W311MI，QIG System Requirement windows10（32/64bits), Windows 8.1(32/64bits), Windows 8(32/64bits), Windows 7(32/64bits), Windows XP(32/64bits) Environment Operating Temperature: 0℃~40℃ (32℉~104℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing

We are currently closed until 9 January. Your order will be processed as soon as we re-open Item is expected to be in stock, however stock levels are LOW, so stock may be finished. If ordered, we will contact you if this product is sold out FEATURES BP671 8.2L Small Form Factor The BP Series was designed to offer quick integration. No peripheral carrier or bezel must be removed for assembly. This allows really quick assembly and reduces costs. Easy Integration The BP Series was designed to offer quick integration. No peripheral carrier or bezel need be removed for assembly. This allows really quick assembly and reduces costs.   Antenna Mount Ready for WLAN Card Supports Mini-ITX Motherboards Supports Mini-ITX motherboards for a wide choice of system features and price points.   Standard TFX 12V Power Supply Internal TFX 200W Power supply equipped with a temperature control sensor that reduces noise and allows quiet operation. Standard Components The BP Series supports standard size components (5.25" & 3.5"). The use of standard components helps to maximize configuration choices and minimize product costs.   Tool-Free Optional screwless design on the ODD bay and side panel for easy assembly. Optimal Thermal Performance An ultra silent 80mm case fan with Intel Thermally Advantaged Small Chassis 1.0 vents improve the airflow and optimize thermal performance, keeping temperatures below 102.2°F (39°C).  Excellent Thermal Solution 80x80x25mm System Fan Intel Thermally Advantaged Small Chassis 1.0 Vents Keeps temperatures below 39°C Optional Removable Air Filter   System Acoustic Result System Run Sound Pressure Idle 29.2dB Max Power (CPU 100%) 33.4dB System Thermal Result CPU Ambient Average Temperature 101°F (38.4°C) CPU Core™ 2 Duo E6550 2.33GHz (65W) Ambience Temperature 35°C (95°F) Ta Average 34.6 (94°F) Host Bridge 123°F (50.7°C) RAM 119°F (48.3°C) ODD 117°F (47.2°C) HDD 123°F (50.5°C) PSU Fan inside 110°F (43.6°C) PSU Fan outside 118°F (47.7°C) Second Fan inside 110°F (43.6°C) Second Fan outside 112°F (44.3°C) Lab Test: Intel Box CPU (Intel Core™ 2 Duo E6550 / 2.33GHz, LGA 775, 65W). + Source from In Win lab. All examined sources are subject to change at anytime, without prior notice. + Performance tests and ratings are measured using specific computer systems and/or components and reflect the approximate performance of In Win products as measured by those tests. Any difference in system hardware, software design, or configuration may affect actual performance.  Front Ports USB 2.0 x 2 HD Audio x 1 Optional IEEE 1394 Optional USB 3.0 x 2   Rear Ports eSATA x 1 (at Rear Panel with Module) USB2.0 x 2 (at Rear Panel with Module) Universal Antenna Modules (UAMs) Mounting Hole Ready Security Padlock Loop Kensington Slot Supports 2.5" x 2    Optional Chassis Intrusion Switch Screwless ODD Bay Clips Screwless Top Cover Clips 3.5" to 2.5" HDD/SSD Bracket Optional 60mm Fan x 1  (60 x 60 x 10mm, 2500RPM, 20dB Fan, 4-Pin Power Connector)  PRODUCT SPECIFICATIONS