Clip set 9v battery

SNAP-ON; PCB MOUNT BATTERY CLIPS FOR PM3 9V BATTERY. (SET OF MATTING TW0)

Buy 9V Battery Snap On Battery T Type Clip Lead Wire Connector for R5.99

 9v rechargable battery x 1 charging set with AA or AAA batteries with function to also charge a 9v battery            

Scope: Mainly used in battery (9V or 12V) voltage monitoring, simple and practical, support sound and light alarm. Features: When the buzzer low voltage will "DiDiDi" sounds and the red LED lights up, when the battery voltage rise above to the set value, buzzer will stop alarm. Size: 2.9 x 3 cm The main chip: LM358 9V Battery: When a battery over-discharge (battery voltage drops below about 8V), the red lights and the buzzer calling to achieve sound and light alarm, to achieve control battery discharge status, prevent over-discharge battery, and damage battery; 12V Battery: When a battery over-discharge (battery voltage less than 10.4V), the red lights and the buzzer calling to achieve sound and light alarm, to achieve control battery discharge status, prevent over-discharge battery, and damage battery; Advantages: With a sound and light alarm, simple and practical. The module input with reverse protection, if reverse polarity power input will not burn. But without overvoltage protection, if the input exceeds 15V, the chip above the module will burn out. Adjustment method: 9V Battery: Input 9V, the LM358 voltage adjustment between 2 feet and 4 feet to about 5.78V, the alarm voltage is 8V (we has set it before shipment, so you don't need to adjust it again). Clockwise adjustment, 2 feet and 4 feet voltage is reduced, the sensitivity increased. 12V Battery: Input 12V, The LM358 voltage adjustment between 2 feet and 4 feet to about 6.05V, the alarm voltage is 10.4V (we has set it before shipment, so you don't need to adjust it again). Clockwise adjustment, 2 and 4 feet voltage is reduced, the sensitivity increased. Package includes: 3 x Battery Over-discharge Protection Module

Scope: Mainly used in battery (9V or 12V) voltage monitoring, simple and practical, support sound and light alarm. Features: When the buzzer low voltage will "DiDiDi" sounds and the red LED lights up, when the battery voltage rise above to the set value, buzzer will stop alarm. Size: 2.9 x 3 cm The main chip: LM358 9V Battery: When a battery over-discharge (battery voltage drops below about 8V), the red lights and the buzzer calling to achieve sound and light alarm, to achieve control battery discharge status, prevent over-discharge battery, and damage battery; 12V Battery: When a battery over-discharge (battery voltage less than 10.4V), the red lights and the buzzer calling to achieve sound and light alarm, to achieve control battery discharge status, prevent over-discharge battery, and damage battery; Advantages: With a sound and light alarm, simple and practical. The module input with reverse protection, if reverse polarity power input will not burn. But without overvoltage protection, if the input exceeds 15V, the chip above the module will burn out. Adjustment method: 9V Battery: Input 9V, the LM358 voltage adjustment between 2 feet and 4 feet to about 5.78V, the alarm voltage is 8V (we has set it before shipment, so you don't need to adjust it again). Clockwise adjustment, 2 feet and 4 feet voltage is reduced, the sensitivity increased. 12V Battery: Input 12V, The LM358 voltage adjustment between 2 feet and 4 feet to about 6.05V, the alarm voltage is 10.4V (we has set it before shipment, so you don't need to adjust it again). Clockwise adjustment, 2 and 4 feet voltage is reduced, the sensitivity increased. Package includes: 10 x Battery Over-discharge Protection Module

SHIPPING AND OR COLLECTIONS ARE DONE FROM DURBAN Please do not bid/buy unless you intend proceeding with the order. TO GET A QUOTE FOR COURIER SHIPPING PLEASE SELECT CUSTOMER TO ARRANGE. Teknol Wireless Microphone Lavalier Set  for Video Camera Features:                                                                                                                                                                                                                     For Church and Lectures.                                                  Ideal for Video interviews.                                                    Light weight and portable                                                                                                                                                                                                  Distance metres  effective range. Transmitter: Uses 1 x 9V battery. Receiver: Uses 2 x AAA 1.5V batteries. Frequency: VHF  MHz                                                                                                                                                                                                   Output impedance: 600 ohms                                                                                                                           Integrated  cold-shoe mount Dimension: 95 x 63 x 22  mm (transmitter) 118 x 78 x 20 mm (receiver)    Color: Grey - Material: ABS housing Package included: 1 x Wireless Transmitter 1 x Wireless Receiver 1 x Clip-on Microphone 1 x 6.35(P)/3.5(P) cable for Amplifier.                                                                                                                                   1x 3,5mm mono cable to 3,5mm stereo for Video Camera. 1 x Battery for Transmitter 1 x Battery for Receiver

IN STOCK. SHIPPING VIA SA POSTAL SERVICES 4-5 days TO ANYWHERE IN SOUTH AFRICA R PLEASE CHECK SHIPPING TERMS ON WEBSITE www.shootsa.co.za Warehouse based in Durban.Shipping and or collections are done from DurbanWireless Microphone Lavalier Set for Video Camera Features: For Church and Lectures. Ideal for Video interviews. Light weight portable. Distance metres effective range. Transmitter: Uses 1 x 9V battery. Receiver: Uses 2 x AAA 1.5V batteries. Frequency: VHF MHz Output impedance: 600 ohms Integrated cold-shoe mount Dimension: 95 x 63 x 22 mm (transmitter) 118 x 78 x 20 mm (receiver) Color: Grey - Material: ABS housing Package included: 1 x Wireless Transmitter 1 x Wireless Receiver 1 x Clip-on Microphone 1 x 6.35(P)/3.5(P) cable for Amplifier. 1x 3,5mm mono cable to 3,5mm stereo for Video Camera. 1 x Battery for Transmitter 2x Batteries for Receiver

SET 840 S RF stereo TV listening system ideal for hearing aid wearers OVERVIEW Set 840 S is a RF stereo TV listening system and is especially suited for those who wear hearing aids. Easily connected to a TV, hi-fi system or radio, Set 840 S produces excellent sound, delivered directly to your ears. The sound is transmitted from the receiver to the hearing aid via wireless induction over the induction loop that is included in the scope of delivery. Alternatively, you can connect headphones or induction couplers to the lightweight clip-on receiver. FEATURES Receiver is ideal for connection to hearing aids and headphones (3.5 mm stereo jack plug) Easy to set up and operate Wireless mobility within a range of up to 100 m Transmits even through walls Ideal for plasma TVs Excellent individual stereo sound Three selectable hearing settings on the transmitter: optimized speech intelligibility due to switchable compression and treble emphasis Treble emphasis can be set individually Large, ergonomic volume control on the receiver Balance control on the receiver for setting the volume for the right and left ears Lithium polymer battery technology ensures a long operating time of up to 9 hours Receiver can be placed in the transmitter's charging compartment facing in either direction Three selectable transmission channels on the transmitter for optimum reception Auto-tuning - automatic channel search tuning can be activated on the receiver Integrated charging compartment in transmitter for spare battery WHAT'S IN THE BOX? 1 RR 840 S receiver with removable clip 1 TR 840 transmitter 1 EZT 3011 induction loop 1 Lanyard 1 BA 300 battery 1 Power supply with national adapters for EU, UK 1 TV RCA adapter 1 TV SCART adapter 1 TV connection cable with two 3.5 mm stereo jack plugs and one adapter to 1/4" (6.3 mm) jack socket 1 MKE 800 TV N external mic TECHNICAL DATA Color blue Dimensions Receiver: 70 x 60 x 26 mm Dimensions Transmitter: 112 x 146 x 58 mm Frequency response 50 - 16000 Hz THD, total harmonic distortion Weight Receiver: ~ 50 g Weight Transmitter: ~ 260 g Charging time env. 3 heures Range up to 100 m Microphone connector 3,5 mm, same plug as Audio-XLR connector Signal-to-noise ratio typ. 70 dB(A) Operating time Receiver: up to 9 h Modulation

JOYO JP-03 9V DC Power Supply for Guitar Pedal Device Features: Can power twenty(max.) 9V pedals simultaneously. Compact and portable design, easy to carry along. Cable length is up to 150cm, to match your need better. ABS casing, durable and sturdy. Easy operation, no need of complicated installation. Specifications: Input: 100-240V 50/60Hz 0.6A Output: DC 9V Max current: 2000mA Package size: 15.5*13.5*5cm Package weight: 353g                                         Package Included: 1 x Power Adapter(US plug) 1 x 8-way Cable 2 x Polarity Converter 2 x 3.5mm Converter 2 x Battery Clip Converter

ONN Q6 8GB MP3 1.5 Inch TFT FM Recording Clip Design WMA WAV Mp3 Music Player Package weight: 0.08 kg Features: Built-in 8GB memory and 180mAh rechargeable battery, it offers enough capacity to store more music files and about 8 hours of music time Built-in FM radio, it supports auto search, manual search and save channel. Microphone recording gives you clear and high definition recording when learning, evidence obtain, etc Adopts high performance chip, it delivers crystal and high definition sound quality. It supports MP3, WAV music format and JPEG, GIF, BMP picture format. Download relative music and picture files to make your listening easier With sleep auto off function, you can have a nice sleep with music accompanied after one day job. Set time for auto off according to your custom Exquisite appearance make it a masterpiece which bights you great music enjoyment at the same time in your daily life. Small size and clip design allows you to take out in your pocket like running, riding, etc. Small but convenient and useful Specifications: Display: 1.5 in TFT Display USB: USB 2.0 Storage: 8GB Battery Capacity: 180mAh Playing Time: 8 h Recording: Sampling Frequency: 8-44KHz Recording Format: WAV (32-128K bps) Music Format: MP3, WMA Pictures Format: JPEG, GIF, BMP Video Format: AVI Language: Chinese, English, etc. Supporting Operation System: Windows 98 / ME / 2000 / XP Color: Blue, Silver Rose(Optional) MP3 Size: Approx. 3.8 x 3.4 x 1.5cm / 1.50 x 1.34 x 0.59in MP3 Weight: Approx. 19g / 0.65oz Package Included: 1 x ONN Q6 MP3 Player 1 x Charging Cable 1 x User Manual Click here for more deals ONN Q6 8GB MP3 1.5 Inch TFT FM Recording Clip Design WMA WAV Mp3 Music Player ONN Q6 8GB MP3 1.5 Inch TFT FM Recording Clip Design WMA WAV Mp3 Music Player

Bolun WR-601 Microphone Transmitter Receiver Set with Mini Clip Microphone Description: Tansmitter Dimensions: (3.7 x 2.52 x 0.87)" / (9.4 x 6.4 x 2.2)cm (L x W x H) Receiver Dimensions: (2.76 x 1.77 x 0.63)" / (7 x 4.5 x 1.6)cm (L x W x H) Microphone Diameter: 0.47 in / 1.2cm Weight: 7.90oz / 224g Modulation: FM Frequency Response: 80 -12500Hz Output Impedance: 600 ohm Operating Voltage: 9V for Tansmitter / 1.5V for Receiver Effective Distance: 20M Features: Ideal for aerobics/dance/sports instructors Record audio on both left and right channels Elegant style miniature microphone is perfect for video use It is a handheld dynamic microphone, ideal for vocal and instrument   Provide a perfect wireless solution for any presentation or performance application Package Includes: 1 x Wireless Microphone 1 x Transmitter 1 x Receiver

Estimated delivery time: working days (Imported from the UK) - T&C's Apply Please note that all Christmas gift orders need to be placed before the 14th of November to ensure that they are delivered to you in time. This item includes free delivery within South Africa. AKG MINI WMS40 ISM 3 Frequency UHF ISM MHz (Free to use all over Europe) Instrumental Set IJ Up to 30h playtime with one single AA battery IJ Plug & Play IJ Gain control on pocket transmitter IJ Compatible with all AKG MicroMics IJ low battery indicator IJ Smallest and lightest bodypack transmitter in its class All WMS 40 MINI vocal and instrumental systems share the same brilliant sound and ease of use. Unique HDAP (High Definition Audio Performance) technology ensures the best possible, realistic sound at any time. The status lEDs of the receiver SR40 mini show following information: ON/OFF, link lED RF OK and audio clip lED AF clip. The output gain from the 6,3mm jack output is controlled via the volume gain switch. The included SMPS (switched mode power supply) works from V and features EU/UK/US adapters. The rugged handheld transmitter HT40 Mini offers a metal microphone cap and an ON/OFF/MUTE switch. The dynamic microphone capsule features a cardioids polar pattern.

Estimated delivery time: working days (Imported from the UK) - T&C's Apply Please note that all Christmas gift orders need to be placed before the 14th of November to ensure that they are delivered to you in time. This item includes free delivery within South Africa. AKG MINI WMS40 ISM 3 Frequency UHF ISM MHz (Free to use all over Europe) VocalSet IJ Up to 30h playtime with one single AA battery IJ Plug & Play IJ Gain control on pocket transmitter IJ Compatible with all AKG MicroMics IJ low battery indicator IJ Smallest and lightest bodypack transmitter in its class All WMS 40 MINI vocal and instrumental systems share the same brilliant sound and ease of use. Unique HDAP (High Definition Audio Performance) technology ensures the best possible, realistic sound at any time. The status lEDs of the receiver SR40 mini show following information: ON/OFF, link lED RF OK and audio clip lED AF clip. The output gain from the 6,3mm jack output is controlled via the volume gain switch. The included SMPS (switched mode power supply) works from V and features EU/UK/US adapters. The rugged handheld transmitter HT40 Mini offers a metal microphone cap and an ON/OFF/MUTE switch. The dynamic microphone capsule features a cardioids polar pattern.

18650 26650 Lithium Li-ion Battery Tester LCD Meter Voltage Current Capacity Features: Voltage: 2.8-30.0V Current: 0-10.0A 18350/18650/26650 Resolution: 0.1 Accuracy: ±2% Measure: Voltage/current/capacity/the load resistance All in one meter Suitable for: 18350 18650 26650 lithium li-ion battery and other battery for DIY project Function description: Measure the battery voltage Range: 2.8~3.0V Resolution: 0.1V Accuracy: 2% Measure the battery capacity Battery capacity is the battery grid form on the LCD display, a total of five girds. Battery capacity is distinguished by the battery voltage Displaying X0 grids stand for full capacity, X1 girds for 4/5 capacity, X2 grids for 3/5 capacity, X3 grids for 2/5 capacity, X4 grid for 1/5 capacity, X5 grid for 0/5 capacity. (default: 3.7V full capacity, 2.8V is exhausted) Can be set the full capacity 2.9v-30.0V, the exhausted 2.8V-29.9V Measure the current: Range: 0.0~10.0A Resolution: 0.1A Accuracy: 2% Measure the resistance of the current: Range: 0.0~10.0A Resolution: 0.1A Accuracy: 2% Measure the resistance of the load: Range: 0~999Ω, when over 999Ω display “OL” Resolution: when less than 10Ω, resolution is 0.01Ω When less than 100Ω, resolution is 0.1 Ω When less than 1000Ω, resolution is 1 Ω Accuracy: 2% With Backlight, default off-backlight, you can turn on/off the backlight by button Specifications: Size: 42 x 19 x 12mm Display size: 25 x 12mm Note: battery: ≥2.8V Working temperature: -10￢ﾄﾃ to 40￢ﾄﾃ Package included: 1 x Lithium Li-ion battery tester module

Features: Voltage: 2.8-30.0V Current: 0-10.0A 18350/18650/26650 Resolution: 0.1 Accuracy: 2% Measure: Voltage/current/capacity/the load resistance All in one meter Suitable for: 18350 18650 26650 lithium li-ion battery and other battery for DIY project Function description: Measure the battery voltage Range: 2.8~3.0V Resolution: 0.1V Accuracy: 2% Measure the battery capacity Battery capacity is the battery grid form on the LCD display, a total of five girds. Battery capacity is distinguished by the battery voltage Displaying X0 grids stand for full capacity, X1 girds for 4/5 capacity, X2 grids for 3/5 capacity, X3 grids for 2/5 capacity, X4 grid for 1/5 capacity, X5 grid for 0/5 capacity. (default:  3.7V full capacity, 2.8V is exhausted) Can be set the full capacity 2.9v-30.0V, the exhausted 2.8V-29.9V Measure the current: Range: 0.0~10.0A Resolution: 0.1A Accuracy: 2% Measure the resistance of the current: Range: 0.0~10.0A Resolution: 0.1A Accuracy: 2% Measure the resistance of the load: Range: 0~999, when over 999 display OL Resolution: when less than 10, resolution is 0.01 When less than 100, resolution is 0.1 When less than 1000, resolution is 1 Accuracy: 2% With Backlight, default off-backlight, you can turn on/off the backlight by button Specifications: Size: 42 x 19 x 12mm Display size: 25 x 12mm Note: battery: 2.8V Working temperature: -10 to 40 Package included: 3 x Lithium Li-ion battery tester module