Clip fuse cq

CLIP FOR 5x20 FUSES; PHOSPHOR BRONZE; 10A; EAR TYPE BRIGHT TIN PLATED

CLIP FOR 6x32 FUSES; 6.3MM DIAMETER;SPRING BRASS; 15A; BRIGHT TIN PLATED

CLIP FOR 5x20 FUSES; SPRING BRASS; 10A; EAR TYPE BRIGHT TIN PLATED

Description Features Suitable fuse cover: FUSE-1 Supercedes CL4N. More Products View More Products

MULTI-CLIP FOR 5/6.3 FUSES; EAR TYPE PHOSPHOR BRONZE; 10A; BRIGHT TIN PLATED

Buy FC63-SERIES CLIP FOR FUSE 6mm SILVER 779-6311-031 for R0.60

The XGA- amplifier offers clean, reliable power in a durable, lightweight enclosure. If you demand professional amplification performance, the XGA- is perfect for delivering pure, consistent wattage night after night.   With watts of Instant Peak Power ( watts RMS), the XGA- is ideal for powering PA systems and DJ rigs. To ensure seamless, reliable performance, the amp features front-to-rear airflow and a variable-speed cooling fan for thermal stability, along with a limiter circuit switch, DC output protection and short circuit protection.   For true connecting convenience, the XGA- boasts XLR and ¼-inch balanced inputs, as well as RCA unbalanced inputs and three Speakon outputs. The unit also provides front panel indicators for Signal, Clip, Protect and Bridge, plus level controls for channels 1 and 2. Selectable modes for Stereo and Mono Bridge give you even more flexibility, while its sleek, lightweight design ensures total portability.   With clean, dependable power in a resilient, 26-pound enclosure, the XGA- offers unmatched value for anyone who is serious about sound.   Watt IPP* High Power output to drive professional loudspeakers without clipping Front-to-rear airflow and cooling fan for thermal stability and reliability XLR and ¼” (6.5mm Jack) balanced and RCA unbalanced inputs Limiter circuit switch for amp output protection Stereo and Mono Bridge Variable speed fan for low noise Comprehensive front panel indicators including signal, clip, protect and bridge 3 Speakon outputs for Channels A/B/Bridge 5-way binding banana plug channel outputs Bridge control switch DC output protection and Short circuit protection Frequency response 10Hz – 50kHz at 1.5 dB Ground lift switch Total Harmonic Distortion: Less than 0.1% Input sensitivity & Impedance: 0.77v Signal to Noise (20 Hz – 20 kHz) > 100dB * Instant Peak Power Dimensions (WxDxH) 19” x 13.8” x x 350 x 88mm) Weight: Lbs ( kgs)   Frequency Response 10Hz ~ 50kHz ±1.5dB Signal to Noise (LF / HF) >90dB THD (LF / HF) > 0.1% Input Sensitivity 0.77v Maximum Input Level 21dBv/9v Damping Factor (F=1kHz Input Impedance 20K Ω Fuse 5mm x 20mm AC 115v/230v Hz Output Stereo 8 Ω 2 x 400W RMS Output Stereo 4 Ω 2 x 550W RMS Output Bridged W RMS Dimensions (WxDxH) 19” x 13.8” x mm x 350mm x 88mm) Net Weight 26.8 lbs (12.1 kg)

The XGA- amplifier offers clean, reliable power in a durable, lightweight enclosure. If you demand professional amplification performance, the XGA- is perfect for delivering pure, consistent wattage night after night. With watts of Instant Peak Power ( watts RMS), the XGA- is ideal for powering PA systems and DJ rigs. To ensure seamless, reliable performance, the amp features front-to-rear airflow and a variable-speed cooling fan for thermal stability, along with a limiter circuit switch, DC output protection and short circuit protection. For true connecting convenience, the XGA- boasts XLR and ¼-inch balanced inputs, as well as RCA unbalanced inputs and three Speakon outputs. The unit also provides front panel indicators for Signal, Clip, Protect and Bridge, plus level controls for channels 1 and 2. Selectable modes for Stereo and Mono Bridge give you even more flexibility, while its sleek, lightweight design ensures total portability. With clean, dependable power in a resilient, 26-pound enclosure, the XGA- offers unmatched value for anyone who is serious about sound. Watt IPP* High Power output to drive professional loudspeakers without clipping Front-to-rear airflow and cooling fan for thermal stability and reliability XLR and ¼” (6.5mm Jack) balanced and RCA unbalanced inputs Limiter circuit switch for amp output protection Stereo and Mono Bridge Variable speed fan for low noise Comprehensive front panel indicators including signal, clip, protect and bridge 3 Speakon outputs for Channels A/B/Bridge 5-way binding banana plug channel outputs Bridge control switch DC output protection and Short circuit protection Frequency response 10Hz – 50kHz at 1.5 dB Ground lift switch Total Harmonic Distortion: Less than 0.1% Input sensitivity & Impedance: 0.77v Signal to Noise (20 Hz – 20 kHz) > 100dB * Instant Peak Power Dimensions (WxDxH) 19” x 13.8” x x 350 x 88mm) Weight: Lbs ( kgs Frequency Response 10Hz ~ 50kHz ±1.5dB Signal to Noise (LF / HF) >90dB THD (LF / HF) > 0.1% Input Sensitivity 0.77v Maximum Input Level 21dBv/9v Damping Factor (F=1kHz Input Impedance 20K Ω Fuse 5mm x 20mm AC 115v/230v Hz Output Stereo 8 Ω 2 x 400W RMS Output Stereo 4 Ω 2 x 550W RMS Output Bridged W RMS Dimensions (WxDxH) 19” x 13.8” x mm x 350mm x 88mm) Net Weight 26.8 lbs (12.1 kg)

For those performance situations where additional low-frequency output and punch are required, even beyond the already-impressive bass capability of the TS2 full-range speakers, the new TS2 powered subwoofers are the perfect solution Pair TS215S with any full-range speaker system to extend the bass response and dramatically enhance the overall impact of the music being played. Features: Output Power: 1250 W peak, 625 W continuous Transducer Low: 15” (381 mm) woofer, 3” (76 mm) voice coil Frequency Response: 35–95 Hz (-10 dB) Maximum SPL: 129 dB (@ 1 m) Connections: (2) XLR+1/4” (6.35 mm) inputs; (2) XLR outputs; (1) IEC power cable input Input Level: Line +4 dBu (nominal) External Controls: Volume control, signal/clip limiter with LED, polarity-reverse switch, high-pass filter bypass switch with LED, extended low-frequency switch with LED, power switch with LED Electronic Protections: Electronic clip, thermal and transducer overdrive protection Enclosure: Internally braced plywood cabinet; 35 mm mounting pole socket ontop panel Power Connection: Standard IEC cable Input Voltage: 110–120, 220–240 V AC; 50/60 Hz Consumption: 450W Fuse: T6.3AL AC250V (110–120 V) or T3.15AL AC250V (220–240 V) Dimensions (W x D x H): 21.34” x 20.3” x 24.8” / 542 x 515 x 630 mm Weight: 62 lbs. / 28.2 kg

Professional DSP-controlled switch mode power amplifier. The high efficient class-D design guarantees high power, even at 2Ω! Stereo: 2x 300Wrms @ 8Ω ~ 2x 500Wrms @ 4Ω ~ 2x 750Wrms @ 2Ω Bridge: Wrms @ Wrms @ 4Ω Perfect for both DJ and install applications (pubs, shops, hotels, restaurants,) Complete DSP-section with: HPF: (Hz) eliminates unwanted, energy absorbing frequencies. LPF: (6.3k~20kHz) cuts the upper frequencies if needed to avoid oscillations. 8 Band parametric EQ: (100Hz~12.5kHz, Q:db) for perfect tuning. 2 Limiters: for increased protection (threshold 0~-12dB). 2 Delays: can be set separately from 0 to 20ms (0 to 6,86m) for each channel. Crossover: build an active system (Linkwitz-Riley 24dB/oct, 50Hz~3,15kHz) 3 working modes: Stereo, Bridge, Input Y (mono in, used for active system) Temperature controlled fan cooling DC fault + high temperature + overload + short circuit protections Balanced XLR + jack inputs with possibility for daisy chaining of several inputs. SpeakON + bind-post wire terminal outputsPower stereo 8Ω (1kHz, THD+N 1%): 2x300Wrms Power stereo 4Ω (1kHz, THD+N 1%): 2x 500Wrms Power stereo 2Ω (1kHz, THD+N 1%): 2x 750Wrms Power bridge 8Ω (1kHz, THD+N Wrms Power bridge 4Ω (1kHz, THD+N Wrms Freq. Resp. (+/-0.5dB): Hz Input sensitivity: +4dBu (1,2Vrms) Input CMMR (1kHz): >50dB Input impedance: 30kΩ Balanced, 15kΩ un-Balanced THD: S/R ratio: >100dB Channel separation 8Ω/1kHz: >70dB Damping factor Hz: >200 Cooling: fan cooling Amplifier type: Class D (switch mode) Power supply type: Switch mode Input Connections: Balanced XLR + balanced " (6,3mm) stereo jacks Output Connections: bind-post wire terminals and 2 SpeakON for Stereo & Bridge Output Protection: Soft Start, Short Circuit, Limiter, DC Fault, AC Line Fuse Thermal Cut Amplifier working modes: Stereo ~ Bridge ~ Y-mode DSP processing: HPF: 40Hz ~ 150Hz LPF: 6,3kHz ~ 20kHz PEQ: 8band 100Hz ~ 12,5kHz * Q: 0,5 ~ 5 * Gain: 6dB 2 Clip limiters: 0dB ~ -12dB 2 Delays (time alignment): 0 ~ 20ms (6,86m) X-over (24dB/oct Linkwitz/Riley): 50Hz ~ 3,15kHz Power Supply: Vac Hz Dimensions (mm): 482 x 88 x 280 Weigth (kg): 4,9

Professional DSP-controlled switch mode power amplifier. •The high efficient class-D design guarantees high power, even at 2Ω! •Stereo: 2x 440Wrms @ 8Ω ~ 2x 750Wrms @ 4Ω ~ 2x Wrms @ 2Ω •Bridge: Wrms @ Wrms @ 4Ω •Perfect for both DJ and install applications (pubs, shops, hotels, restaurants, …) •Complete DSP-section with: HPF: (Hz) eliminates unwanted, energy absorbing frequencies. LPF: (6.3k~20kHz) cuts the upper frequencies if needed to avoid oscillations. 8 Band parametric EQ: (100Hz~12.5kHz, Q:db) for perfect tuning. 2 Limiters: for increased protection (threshold 0~-12dB). 2 Delays: can be set separately from 0 to 20ms (0 to 6,86m) for each channel. Crossover: build an active system (Linkwitz-Riley 24dB/oct, 50Hz~3,15kHz) 3 working modes: Stereo, Bridge, Input Y (mono in, used for active system) •Temperature controlled fan cooling •DC fault + high temperature + overload + short circuit protections •Balanced XLR + jack inputs with possibility for daisy chaining of several inputs. •SpeakON® + bind-post wire terminal outputsPower stereo 8Ω (1kHz, THD+N 1%): 2x440Wrms Power stereo 4Ω (1kHz, THD+N 1%): 2x 750Wrms Power stereo 2Ω (1kHz, THD+N 1%): 2x Wrms Power bridge 8Ω (1kHz, THD+N Wrms Power bridge 4Ω (1kHz, THD+N Wrms Power bridge 4Ω (1kHz, THD+NFreq. Resp. (+/-0.5dB): Hz Input sensitivity: +4dBu (1,2Vrms) Input CMMR (1kHz): >50dB Input impedance: 30kΩ Balanced, 15kΩ un-Balanced THD: S/R ratio: >100dB Channel separation 8Ω/1kHz: >70dB Damping factor Hz: >200 Cooling: fan cooling Amplifier type: Class D (switch mode) Power supply type: Switch mode Input Connections: Balanced XLR + balanced ¼" (6,3mm) stereo jacks Output Connections: bind-post wire terminals and 2 SpeakON® for Stereo & Bridge Output Protection: Soft Start, Short Circuit, Limiter, DC Fault, AC Line Fuse Thermal Cut Amplifier working modes: Stereo ~ Bridge ~ Y-mode DSP processing: •HPF: 40Hz ~ 150Hz •LPF: 6,3kHz ~ 20kHz •PEQ: 8band 100Hz ~ 12,5kHz * Q: 0,5 ~ 5 * Gain: ±6dB •2 Clip limiters: 0dB ~ -12dB •2 Delays (time alignment): 0 ~ 20ms (6,86m) •X-over (24dB/oct Linkwitz/Riley): 50Hz ~ 3,15kHz Power Supply: Vac Hz Dimensions (mm): 482 x 88 x 280 Weigth (kg): 5,2

Feature: 1. Multiple Uses - perfect device for batteries maintaining and charging for cars, motorcycles, boats, ATVs, UTVs, RVs, etc. 2. 148cm/4.8ft Output Cord - long enough to work for all 6V and 12V lead acid batteries (WET, MF, AGM and GEL). 3. Voltage Auto Detection - 0.75-1.25Amp of charging current intelligent battery trickle charger, helps to detect the voltage and define voltage status. 4. Safety - comes with fuse for overcharge and short circuit protection, while spark-free technology and quick disconnect leads ensure safely charging. 5. Easy Operation/with LED Indicator - it's very simple for using, hook it up and connect it for easy charging. 6. Application: for 6V/12V lead-acid batteries (WET, MF, AGM, GEL) 7. Operating Instructions: connecting the terminal rings/clamps directly to the corresponding connectors on the battery posts. Specification: Material: ABS + Metal Color: Black Plug: European Plug Rated Power: 15W Input Voltage: 100V-240V AC Output Voltage: DC 6V & DC 12V Charging Current: 750mA Housing Protection: IP65 Terminals: Alligator Clips & Ring Terminal Certificate: CE Weight: 265g Size: 75mm*45mm* 30mm Wire Length: 1.52m Package Included: 1 X Battery Charger 1 X Ring Terminal Connector 1 X Alligator Clip Connector