Citronic power

CITRONIC ULTIMA PRO-2000 High Power Amplifier, Power rms: 4 Ohms 2 x 1000W, Power rms: 8 Ohms 2 x 660W, Bridged - 8 Ohms 2000W Comes with a flight Case, price negotiable and have 3 for sale.

A phased-inverted compact low frequency speaker enclosure made from premium Russian ply with custom drive units which give a wide bandwidth and an exceptionally smooth response, making it ideal for the demands of today’s modern programme material. Industry standard flying points are fitted as standard for ease of installation and integration into multiple arrays. Its computer-aided design ensures accurate tuning of enclosures for maximum output and tailored bottom response. Great attention has also been given to panel bracing to reduce resonances so increasing sonic definition and authority. Features: Durable textured black paint finish 16 hanging points Phase-inverted compact low frequency speaker Big dynamic low frequency, vocal affinity transmission Coated steel grille lined with special material to prevent ingress of foreign particles for maximum protection Speakon® connectors fitted for reliability and maximum power transfer from the amplifier Top hat fitted for maximum versatility in mixing and matching enclosures All fittings rebated for easier stacking and arraying Steel bar handles fitted as standard Technical Specifications: Power rms: W Power max.: (5 mins max.)    W Woofer: 2 x 45cm (18") Impedance: 4 ohms Frequency response: 35Hz - 300Hz (-3dB) Frequency response: 30Hz - 500Hz (-10dB) SPL @ 1W/1m: 99dB SPL max: 130dB (±3dB) Dimensions: 640 x 970 x 755mm Weight: 83kg 1 year limited guarantee. For more info on this product please click here

A full range speaker enclosure made from premium Russian ply with custom drive units which give a wide bandwidth and an exceptionally smooth response, making it ideal for the demands of today’s modern programme material. Industry standard flying points are fitted as standard for ease of installation and integration into multiple arrays. Its computer-aided design ensures accurate tuning of enclosures for maximum output and tailored bottom response. Great attention has also been given to panel bracing to reduce resonances so increasing sonic definition and authority. Features: Durable textured black paint finish 12 hanging points Powerful low frequency, rich elasticity, crisp vocal penetration Coated steel grille lined with special material to prevent ingress of foreign particles for maximum protection Active electronic protection fitted to prevent overload to H.F. units Crossovers optimally designed to give smooth and balanced integration of drivers Speakon® connectors fitted for reliability and maximum power transfer from the amplifier Top hat fitted for maximum versatility in mixing and matching enclosures All fittings rebated for easier stacking and arraying Steel bar handles fitted as standard Technical Specifications: Power RMS: 300W Power max. (5 mins max.): 500W Woofer: 30cm (12") Tweeter: 4.4cm (1.75") Impedance: 8 ohms Frequency response: 60Hz - 18kHz (-3dB) Frequency response: 50Hz - 20kHz (-10dB) Dispersion: H: 90°, V: 40° SPL @ 1W/1m: 97dB SPL max: 121dB (±3dB) Dimensions: 586 x 405 x 405mm Weight: 27.5kg 1 year limited guarantee. For more info on this product please click here

A dual angle floor wedge fitted with a top hat enabling it to be used also as a pole mounted top box. Using this option for main PA as well as floor wedges gives the whole system the same sound signature greatly reducing EQ problems hence simplifying the set-up for bands with no dedicated sound engineer. The enclosure is made from premium Russian ply with custom drive units which give a wide bandwidth and an exceptionally smooth response, making it ideal for the demands of today’s modern programme material. Industry standard flying points are fitted as standard for ease of installation and integration into multiple arrays. Its computer-aided design ensures accurate tuning of enclosures for maximum output and tailored bottom response. Great attention has also been given to panel bracing to reduce resonances so increasing sonic definition and authority. Features: Durable textured black paint finish 12 x M10 hanging points Powerful low frequency, rich elasticity, crisp vocal penetration Coated steel grille lined with special material to prevent ingress of foreign particles for maximum protection Speakon® plugs fitted for reliability and maximum power transfer from the amplifier Top hat fitted for maximum versatility in mixing and matching enclosures All fittings rebated for easier stacking and arraying Steel bar handles fitted as standard Technical Specifications: Power rms: 300W Power max. (5 mins max.): 600W Woofer: 1 x 38cm (15") Tweeter: 4.4cm (1.75")Titanium Impedance: 8 ohms Frequency response: 50Hz - 18kHz (-3dB) Frequency response: 45Hz - 20kHz (-10dB) Dispersion: H: 90°, V: 60° SPL @ 1W/1m: 97dB SPL max: 122dB (±3dB) Dimensions: 490 x 670 x 390mm Weight: 30kg 1 year limited guarantee. For more info on this product please click here

A full range speaker enclosure made from premium Russian ply with custom drive units which give a wide bandwidth and an exceptionally smooth response, making it ideal for the demands of today’s modern programme material. Industry standard flying points are fitted as standard for ease of installation and integration into multiple arrays. Its computer-aided design ensures accurate tuning of enclosures for maximum output and tailored bottom response. Great attention has also been given to panel bracing to reduce resonances so increasing sonic definition and authority. Features: Durable textured black paint finish 12 hanging points Powerful low frequency, rich elasticity, crisp vocal penetration Coated steel grille lined with special material to prevent ingress of foreign particles for maximum protection Active electronic protection fitted to prevent overload to H.F. units Crossovers optimally designed to give smooth and balanced integration of drivers Speakon® connectors fitted for reliability and maximum power transfer from the amplifier All fittings rebated for easier stacking and arraying Steel bar handles fitted as standard Technical Specifications: Power RMS: 600W Power max. (5 mins max.): W Woofer: 2 x 38cm (15") Tweeter: 7.2cm (3")Titanium Impedance: 4 ohms Frequency response: 55Hz - 18kHz (-3dB) Frequency response: 45Hz - 18kHz (-10dB) Dispersion: H: 60°, V: 40° SPL @ 1W/1m: 100dB SPL max: 128dB (±3dB) Dimensions: x 540 x 503mm Weight: 52kg 1 year limited guarantee. For more info on this product please click here

A full range speaker enclosure made from premium Russian ply with custom drive units which give a wide bandwidth and an exceptionally smooth response, making it ideal for the demands of today’s modern programme material. Industry standard flying points are fitted as standard for ease of installation and integration into multiple arrays. Its computer-aided design ensures accurate tuning of enclosures for maximum output and tailored bottom response. Great attention has also been given to panel bracing to reduce resonances so increasing sonic definition and authority. Features: Durable textured black paint finish 12 hanging points Powerful low frequency, rich elasticity, crisp vocal penetration Coated steel grille lined with special material to prevent ingress of foreign particles for maximum protection Active electronic protection fitted to prevent overload to H.F. units Crossovers optimally designed to give smooth and balanced integration of drivers Speakon® connectors fitted for reliability and maximum power transfer from the amplifier All fittings rebated for easier stacking and arraying Steel bar handles fitted as standard Technical Specifications: Power RMS: 900W Power max. (5 mins max.): W Woofer: 2 x 38cm (15") Tweeter: 7.2cm (3")Titanium Impedance: 4 ohms Frequency response: 50Hz - 18kHz (-3dB) Frequency response: 40Hz - 18kHz (-10dB) Dispersion: H: 90°, V: 60° SPL @ 1W/1m: 100dB SPL max: 124dB (±3dB) Dimensions: x 575 x 550mm Weight: 65kg 1 year limited guarantee. For more info on this product please click here

A full range speaker enclosure made from premium Russian ply with custom drive units which give a wide bandwidth and an exceptionally smooth response, making it ideal for the demands of today’s modern programme material. Industry standard flying points are fitted as standard for ease of installation and integration into multiple arrays. Its computer-aided design ensures accurate tuning of enclosures for maximum output and tailored bottom response. Great attention has also been given to panel bracing to reduce resonances so increasing sonic definition and authority. Features: Durable textured black paint finish 12 hanging points Powerful low frequency, rich elasticity, crisp vocal penetration Coated steel grille lined with special material to prevent ingress of foreign particles for maximum protection Active electronic protection fitted to prevent overload to H.F. units Crossovers optimally designed to give smooth and balanced integration of drivers Speakon® connectors fitted for reliability and maximum power transfer from the amplifier Top hat fitted for maximum versatility in mixing and matching enclosures All fittings rebated for easier stacking and arraying Steel bar handles fitted as standard Technical Specifications: Power RMS: 500W Power max. (5 mins max.): 800W Woofer: 38cm (15") Tweeter: 7.2cm (3") Impedance: 8 ohms Frequency response: 45Hz - 18kHz (-3dB) Frequency response: 40Hz - 20kHz (-10dB) Dispersion: H: 90°, V: 60° SPL @ 1W/1m: 97dB SPL max: 124dB (±3dB) Dimensions: 810 x 505 x 505mm Weight: 43.5kg 1 year limited guarantee. For more info on this product please click here

P Series Stereo & Sub Power Amplifiers2.1 power amplifiers with 2 channels for mid-top cabinets and a single high power sub output with integral active crossover. Designed as a cost effective and efficient solution for bi-amplified sound systems where subs and top cabinets are run together from this single amplifier.Stereo full range outputMono summed sub output (can be full range)Active crossover with variable frequencySpecification: CommonPower supply 240Vac, 50Hz (IEC)Input impedance (balanced/unbalanced) 40k Ohms / 20k OhmsControls 3 x channel level crossover frequencyConnections 3 x XLRF, 3 x jack, 3 x SPKCut-off frequency 50 - 250Hz (12dB/oct)Damping factor >250 (20-400Hz @ 8 Ohms)Slew rate 6.5V/usFrequency response 10Hz - 50kHz (-2dB)THD N 0.04%Signal to noise ratio 86dBLow-cut filter 30Hz fixed (12dB/oct)Dimensions 483 x 439 x 88mm

This powered sub-woofer will add low frequency power and authority to your full range moulded cabs. The enclosure features a 38cm (15”) woofer with bass reflex system, especially designed to give optimal reproduction of low frequencies, housed in a trapezoidal shockproof ABS plastic enclosure with rigid steel grille. Features: Robust polypropylene enclosure Integral top hat Volume and high cut controls Push switch for phase inversion XLR Input/output connection Fused mains IEC inlet with On/Off switch Technical Specifications: Output power: 400W rms Woofer: 38cm (15") Input impedance: 20k ohms Frequency response: 40Hz - 250Hz @ -3dB Sensitivity: 118dB Distortion: 0.02% High cut: 80Hz - 250Hz SPL @ 1W/1m: 120dB Dimensions: 485 x 460 x 700mm Weight: 30.5kg 1 year limited guarantee for more info on this product please click here

Subwoofer bass reflex system specially designed for optimal reproduction of the low frequencies. The shockproof plastic enclosure has a rigid steel grille and feature M8 fixing points, and is fitted with a 15" woofer. To be used in combination with the other enclosures of the moulded series. Technical Specifications: Power RMS: 500W Woofer: 38cm (15") Impedance: 8 ohms Frequency response: 35Hz - 2kHz Distortion: Connector: 2 x Speakon® SPL @ 1W/1m: 97dB Dimensions: 700 x 485 x 460mm Weight: 25.2kg 1 year limited guarantee. For more info on this product please click here

A pair of speaker enclosures made from premium Russian ply with multi-angle design for arraying and wedge monitoring. Surface mounting via the included bracket or flying points afford convenient installation in bars, restaurants and meeting rooms. Custom designed drivers project full range output with a wide dispersion for excellent coverage to listeners. Full range 2-way enclosure set 16.5cm (6.5in) high-power woofer 2.5cm (1in) compression driver with PEI diaphragm 140° x 140° dispersion improves coverage Computer designed for optimal efficiency Available in durable black or white textured paint finish Supplied with mounting brackets Supplied in pairs Woofer: 20cm (8in) Tweeter: 2.5cm (1in) PEI compression driver Power Rms: 100W each Connector: Speakon® NL4 Crossover Frequency: 2.5kHz Dispersion: 140° x 140° Frequency Response: 85Hz - 19kHz Impedance: 8 ohms Sensitivity: 93dB THD: Dimensions: 258 x 247 x 408mm (each) Weight: 8.2kg (each)

10" Speaker System 200WA speaker enclosure made from premium Russian ply with multi-angle design for arraying and wedge monitoring. The cabinet has flying points for convenient installation or top-hat for pole mounting. Custom designed drivers project full range output with a wide dispersion for excellent coverage to listeners.Full range 2-way enclosure25cm (10") high power wooferCompression driver with titanium diaphragmHigh SPL, high sensitivity speakerDurable black textured paint finish35mm pole mount socketSupplied singlySpecificationWoofer 25cm (10")Tweeter 4.4cm (1.7") TitaniumPower rms 200WConnector Speakon® NL4Crossover frequency 2.5kHzFrequency response 60Hz - 20kHzHorn rotation 50-100° x 55°Impedance 8 ohmsSPL @ 1W/1m 95dBTHD

Active nearfield monitors for studio or DJ applications with tuned enclosures housing highly resilient composite main drivers and neo dome tweeters. Efficient amp section delivers accurate audio reference to facilitate creative mixing and reduce listening fatigue. Custom glass aramid composite cone woofers 2.5cm neo soft dome tweeter with ferrofluid Bi-amped (except ST10S) with 12dB/oct. filters Optimised directivity high frequency waveguide Magnetically shielded Balanced XLR/jack and unbalanced RCA inputs (ST10S no RCA) Power supply240Vac 50Hz (IEC) Input impedance (balanced/unbalanced)10kohms S/N ratio82dB/90dB THD% Active Studio monitors with 2 x 50W RMS power (35W subwoofer and 15W each tweeter) Bi-amplified 2-way system 5" (13cm) woofer and 1" (2.5cm) tweeter Magnetically shielded Features Connections (each): 1 x RCA line input (unbalanced), 1 x XLR / 6.3 mm stereo line input (balanced) Variable volume Variable high frequencies (-4dB to +4 dB) Streamlined body made of glass / aramid composite plastic Neodymium soft dome tweeter with ferrofluid Frequency response: 53Hz to 20kHz Sensitivity: 87dB Power supply: V, Hz

Custom glass aramid composite cone woofers 2.5cm neo soft dome tweeter with ferrofluid Bi-amped (except ST10S) with 12dB/oct. filters Optimised directivity high frequency waveguide Magnetically shielded Balanced XLR/jack and unbalanced RCA inputs (ST10S XLR only) Power supply240Vac 50Hz (IEC) Input impedance (balanced/unbalanced)10kohms S/N ratio82dB/90dB THD% ModelST10S (10" Sub) Main driver 25cm (10") HF unit N/A Connectors XLR in and thru Power RMS (LF/HF)100W (no HF) Frequency response Hz Dimensions 400 x 400 x 445mm Weight (each) 14.5kg

Woofer: 2 x 45cm (18in) Power Rms: 1000W Connectors: 2 x Speakon® NL4 Frequency Response: 35Hz - 1.6kHz (-3dB) Impedance: 4 Ohms Power Max (5 Mins Max): 1600W SPL 1W/1m: 100dB SPL Max: 130dB (±3dB) Dimensions: 575 x 1225 x 572mm Weight: 80kg I have 2 for sale- at R5500 each

A pair of speaker enclosures made from premium Russian ply with multi-angle design for arraying and wedge monitoring. Surface mounting via the included bracket or flying points afford convenient installation in bars, restaurants and meeting rooms. Custom designed drivers project full range output with a wide dispersion for excellent coverage to listeners. Full range 2-way enclosure set 16.5cm (6.5in) high-power woofer 2.5cm (1in) compression driver with PEI diaphragm 140° x 140° dispersion improves coverage Computer designed for optimal efficiency Available in durable black or white textured paint finish Supplied with mounting brackets Supplied in pairs Woofer:2 x 16.5cm (6in) Tweeter:2.5cm (1in) Power Rms:160W each Connector:Speakon® NL4 Crossover Frequency:3kHz Dispersion:140° x 140° Frequency Response:70Hz - 18kHz Impedance:8 ohms SPL @ 1W/1m:93dB THD: Dimensions:212 x 194 x 541mm Weight:9.5kg per enclosure Colour:White

FEATURES: * MP3/WAV compatible from CD or USB (ID3 tags) * 3 modes of operation (Vinyl, CD DJ and Auto cue scratch) * Interactive AQ-touch sensitive jog wheel * DSP effects: echo, flanger, filter, scratch and manual break * X & Y Parameters controlled by jog wheel to maximise the sound effects * Seamless/Auto loop (create your own loop or let it do it for you) * Start and break adjustable speeds * Instant start (sound is produced immediately when the play button is pressed) * 4 x Memory banks with option to sample each * Pitch controlled 6, 10, 16 & 100% * Pitch lock function * Fader start option * Large VFD display * 6.3mm headphone jack with trim control * Auto/manual tap BPM * MIDI compatible by the USB SPECS.Power supply 100~240Vac, 50/60Hz.Antishock 10 seconds.USB 2.0.Channel balance 1dB.Channel separation 85dB.Max. number of Folders 999 (max.255 files per folder).Max. number of files max. 999.USB/HDD compatible format FAT 32 (Recommended max 32GB).De-emphasis 16kHz, -20dB (1dB).Frequency response 17Hz - 20KHz (0.4dB).Output level 1Vrms (1dB).Pitch bend 6, 10, 16 & 100%.Signal to noise ratio 90dB.THD 0.01%.Dimensions 296 x 218 x 103.5mm.Weight 2.5kg

Cardioid studio condenser microphone - R Multi-pattern studio condenser microphone - R Studio condenser microphones with 34mm gold sputtered diaphragms housed in a precision engineered alloy body with plated steel mesh. Operated from phantom power with a high grade FET preamp to provide an accurate, full range response for a wide range of acoustic sources. Large gold sputtered diaphragm 10dB pad switch LF roll-off filter Available in cardioid or multi polar pattern Supplied with pouch and shock mount

Citronic CL82DSP Passive mixer with power adapter and speaker cables in carry bag, 2 X Skytec 170.316 SP1500A 15 inch powered speakers with power chords, 2 X HD Skytec speakers stands, Citronic operating manual and Skytec instruction manual. In use for one-man-band, DJ and Karaoke. Reason for selling - Need to get USB mixer with smaller speakers.

Citronic cx-6004 ULTIMA PROF 2X15IN 600w RMS Woofer: 2 x 38cm (15in) Tweeter: 7.2cm (3in) Titanium Power Rms: 600W Dispersion: H: 60°, V: 40° Frequency Response: 55Hz - 18kHz (-3dB) Impedance: 4 Ohms Power Max (5 Mins Max): 1200W SPL 1W/1m: 100dB SPL Max: 128dB (±3dB) Dimensions: 1075 x 540 x 503mm Weight: 52kg I have 4 of these speakers available, awesome condition, great sound system can be used in Chrches, taverns, clubs etc..

ALL IN VERY GOOD CONDITION 2 X BEHRINGER EUROLIVE P PROF 900WATT PA SPEAKERS WITH 2 X 15 WOOFERS AND TITANIUM DIAPH. COMP DRIVERS 2X WHARFEDALE PRO SPEAKERS: CONT – 300WATT PROG – 600WATT PEAK-WATT BEHRINGER PROFESSIONAL DJ MIXER CMX PROF 7-CHANNEL BEHRINGER EP X WATT POWER APLIFIER, PROFESSIONAL POWER REINFORCEMENT SERIES HYBRID B AMPLIFIER CITRONIC PROFESSIONAL AUDIO AX-3 2/3 WAY X OVER HERCULES DJ CONSOLE MK2 DISCO LIGHT IMIX IM-LED/DERBY ALL FOR R CALL/WHATSAPP /