Checker green

Auto Coil On Plug COP Ignition System Quick Tester Checker Circuit Tool Package weight: 0.32 kg Description: Test Results 1: Red LED Light Consistent, steady flashing and beeping indicates the COP is producing the correct amount of voltage. No response or an inconsistent response indicates the COP is NOT producing the correct amount of voltage. This may be caused by one of the following: 1.Fouled spark plug, or incorrect gap 2.Damaged/corroded wires or connectors 3.Faulty coil or PCM Test Results 2: Green LED Light Consistent and steady flashing indicates the duration of the arc is correct. No response or an inconsistent response indicates the duration of the arc is NOT correct. This may be caused by one of the following: 1.Shorted windings inside the coil 2. Resistance or bad connections in the 3. primary / secondary connections 4. Faulty coil Note: This tester is powered by 3v button battery. Package included: 1 x COP Ignition System Quick Tester(Not included batteries) Click here for more deals Auto Coil On Plug COP Ignition System Quick Tester Checker Circuit Tool Auto Coil On Plug COP Ignition System Quick Tester Checker Circuit Tool

Description: AE100 is a quick go tester for relays that provides you with an indication of the general health and functioning of the most common Automotive relays. Tester will check for proper functioning of the relay contacts by connecting the car battery (11V--15V) to the relay coil. Tester will watch the pin configuration, the time to contacts closure and opening, consistency of the relay during each test session. Tester will light the GREEN LED if all passed during the test session, if not light the RED LED. Operating Instructions: 1. Connect the power leads to the car battery -- black alligator clip to negative terminal, red alligator clip to positive terminal. 2. Tester is powered up when the LED illuminates in RED. Check the relay before plugging into the tester. If it’s a 4 pin relay, select “4 pin” on the tester. If it’s a 5 pin relay, select “5 pin” on the tester. 3. Plug in the relay into one of the three receptacles. Press the “Test” button. 4. Tester will check the pin configuration of the unknown relay. Tester will light the RED LED if the unknown relay is not the same to the most of common automotive relays or the pin of the unknown relay is destroyed. 5. Tester will open and close the relay 10 times for testing the time to contacts closure and opening if the pin configuration of the relay is right. Tester will light the RED LED immediately if the time is overtime. 6. Tester will check the consistency of the relay after testing the time to contacts closure and opening ten times. Tester will light the GREEN LED if the test passed, if not light the RED LED. 7. Disconnect power leads from the car battery and remove relay from the tester. Package Included: 1 X Automotive Relay Tester(JH100) 1 X User Manual 1 X Carry Bag

Options: Description: Test Results 1: Red LED Light Consistent, steady flashing and beeping indicates the COP is producing the correct amount of voltage. No response or an inconsistent response indicates the COP is NOT producing the correct amount of voltage. This may be caused by one of the following: 1.Fouled spark plug, or incorrect gap 2.Damaged/corroded wires or connectors 3.Faulty coil or PCM Test Results 2: Green LED Light Consistent and steady flashing indicates the duration of the arc is correct. No response or an inconsistent response indicates the duration of the arc is NOT correct. This may be caused by one of the following: 1.Shorted windings inside the coil 2. Resistance or bad connections in the 3. primary / secondary connections 4. Faulty coil Note: This tester is powered by 3v button battery. Package included: 1 x COP Ignition System Quick Tester(Not included batteries)

Rob Green s/steel exhaust, chip & throttle conversion, old man emu shocks, springs & steering damper, 3x long range fuel tanks, spare wheel carrier conversion, bull bar & spots, checker plate, front suspension guard, specially widened original rims (x5) with 285x75x16 BF Goodrich M/T tyres, front seat covers by Melville & Moon, Air con, CD/radio, FSHR 189,900

Rob Green s/steel exhaust, chip & throttle conversion, old man emu shocks, springs & steering damper, 3x long range fuel tanks, spare wheel carrier conversion, bull bar & spots, checker plate, front suspension guard, specially widened original rims (x5) with 285x75x16 BF Goodrich M/T tyres, front seat covers by Melville & Moon, Air con, CD/radio, FSH, spare keys. This is one beast of a Landy and ready to conquer the bush with its powerful 2.8i motor! Don't miss this one...R 189,900