Cat6 unshielded single rj45

Buy CAT6 Unshielded Single RJ45 Wall Box - Krone Type - 0.10kg for R45.00

Buy CAT6 Unshielded Single RJ45 Wall Box - Krone Type for R49.00

0 Shares Share on Facebook 0 Tweet 0 LinkedIn CAT6 Shielded Single RJ45 Surface Mount Box / Krone Type Wallbox Wallboxes / Surface Mount Boxes are used for installations of Networking (CAT5e/6/7) Cables. Normally Wallboxes are mounted near equipment and attached to RJ45 connector of switches, HDMI equipment or any other equipment using CAT cabling via a short CAT5e / CAT6 or CAT7 patch lead. A Krone Tool needs to be used to insert the wires correctly into the wallbox such as the tool at Krone Tool. The Braid or Copper Wire of shielded CAT Cabling can be connected to the metal connector inside wallbox which connects to a ground wire to ground cable if needed.

Buy CAT5e / CAT6 Unshielded RJ45 Network Cable Connector + Boot for 23-26AWG Cable for R2.60

0 Shares Share on Facebook 0 Tweet 0 LinkedIn 20 Meter CAT6 1Gbit/s Networking LAN Cable (UTP Ethernet Cable) – Precrimped and tested These cables are already pre-terminated and tested with RJ45 connectors and does not need any of the tools or connectors below. To terminate / crimp RJ45 connectors correctly onto UTP or STP cables use RJ45 / RJ11 Crimping tool for UTP / STP cables. Unshielded RJ45 connectors at CAT6 Boots + Connectors (Set of 1 x Boot and 1 x RJ45 Connector). Usage: – Telephony Voice Wiring – Color: Red – 10 Base-T Ethernet Networking – 100 Base-T4 Ethernet networking Specifications Rated Temperature: 75º C Conductor: 0.51mm Solid Bare Copper Insulation(±0.03mm): 0.18mm PE Insulation Dia.: 0.91mm Standard PVC or LSOH jacket Outer Dia. (±1. 0mm): 12.5mm Shielded cable needs to be used for Video/Audio TMDS channel on HDMI video and audio extenders to ensure improved syncing / stable signals. The DDC Channel on HDMI extenders can use UTP (Unshielded Ttwisted Pair), but in general UTP is not supported by manufacturer due to signal attenuation and interference from nearby EMI on audio and video. For networking CAT6 UTP can be installed up to 1Gb/s.

Description Cat6a Cable | Cat6 / UTP / Unshielded Cable 2m Cat6a Unshielded UTP Cable with RJ45-RJ45 Interface Connectors in Grey colour Overview The GigaSPEED XL GS8E modular patch cord family supports the high performance system level requirements built into the GigaSPEED XL cabling solutions. The GigaSPEED XL GS8E family of modular patch cords is available in a wide range of cord types, lengths, colors and configurations. Specifications Electrical Specifications ANSI/TIA Category: 6 DC Resistance, maximum: 0.30 ohm Safety Voltage Rating: 300 V Environmental Specifications Environmental Space: Low Smoke Zero Halogen (LSZH) Flammability Rating: UL 94 V-0 Operating Temperature: -10°C to 60°C General Specifications Cable Type: U/UTP (unshielded) Interface, connector A: RJ45 plug Interface, connector B: RJ45 plug Jacket Color: Lilac Interface Feature, connector A: Standard Interface Feature, connector B: Standard Package, quantity: 1 Pairs, quantity: 4 Mechanical Specifications Conductor Type: Stranded Material Type: Copper alloy | Polycarbonate Outlet/Module Contact Plating: Precious metals Plug Insertion Life, minimum: 750 times Plug Retention Force, minimum: 133 N | 30 lbf Wiring: T568B Regulatory Compliance/Certifications Agency: Classification RoHS 2011/65/EU: Compliant ISO 9001:2008: Designed, manufactured and/or distributed under this quality management system More Information View More Information More Products View More Products

Securnix Single Channel Active Video/Audio/data Transmitter, Aluminum alloy case,, 1 Year Warranty Product Overview The Securnix VB302T active UTP Video Transmitter converts the unbalanced signal into balanced signal and transmits the signal after pre-raise. Receiver receives balanced signal to convert it into unbalanced signal and restores the received signal with one channel of audio transmission function and two channels of data (or standby interface) with perfect receiving effect, which can be applied in the occasions such as Video Monitoring and video meeting, simplify the wiring project and save wire use quantity. Features: • Adopt differential signal transmission with excellent anti-jamming ability • Save project wire expenses, each a pair of twisted pair wire transmits one channel of video signal and one common Cat-5 unshielded twisted pair wire can simultaneously transmit four channels of video signal • The farthest transmission distance can reach 2400m if it is used with active receiver • Outstanding interference rejection, transient protection • Aluminium Alloy Case Specifications: • Video Format NTSC, PAL, and SECAM • Frequency Response DC to 8MHz • Attenuation 0.5dB typical • CMRR 60 dB • Impedance Coax, Male BNC 75 ohms • RJ45/Terminal Block 100 ohms • Working environment Working Temperature -10℃ to +70℃ • Storage Temperature -30℃ to +70℃ • Humidity 0 to 95% • Wire Type UTP5 • Connector Female BNC, RJ45 and terminal Block • Power 12VDC (Max:90mA) • Case Aluminium alloy case • Dimension 105mm*70mm*29mm • Weight 185g/pc Type of the required wire: • Unshielded Cat-5 or above twisted pair wire (Please use standard Cat-5 or above twisted pair wire. The wire quality will directly affect the transmitted image effect and transmission distance.) • Characteristic impedance:100Ω±20Ω • DC Loop Resistance: 18Ω/100m • Differential capacitance: 62pf/m (maximum)

Casey Single Channel Waterproof UTP Video Balun Transceiver For CCTV -Twin Pack,, 1 Year Warranty Single Channel Passive Video Balun, Waterproof CCTV UTP Video Balun, Passive Video Transceiver Product Overview The Casey Single Channel Passive Video Balun, Waterproof CCTV UTP Video Balun, Passive Video Transceiver is a passive transmission device that transmits video signal over unshielded twisted pair wires, point-to-point, for distances up to 1000 feet (330 m). It uses Category 5 UTP. It¿s easy to install and cost effective, and does not require power. Waterproof design makes it work in all weather. It is ideal for mounting directly on virtually all high-density DVRs without any additional cabling. Its crosstalk and noise immunity ensure quality video signals. Please Note: This item is sold as two per pack Highlights -Channel: 1 Channel -Impedance: Coax, Male BNC: 75 ohms/RJ45/Terminal Block: 100 ohms -Transmission Distance: 330m -Compatible: NTSC, PAL, and SECAM -Frequency Response: DC to 8MHz -Waterproof type -Sold as Two per pack Features: ¿ Full-motion CCTV video at distances up to 330m when used with any passive transceiver ¿ Up to 1500m with any active UTP video receiver ¿ Outstanding interference rejection, transient protection ¿ High quality image ¿ "Press-Fit" terminal block ¿ It can work as video transmitter or video receiver ¿ Compact size and easy installation ¿ Water-proof design Specifications: ¿ Video Format NTSC, PAL, and SECAM ¿ Frequency Response DC to 8MHz ¿ Attenuation 0.5dB typical ¿ CMRR 60 dB ¿ Wire Type UTP5 ¿ UTP Connection Tinned copper wire ¿ Power No power required ¿ Case ABS Plastic Impedance ¿ Coax, Male BNC-75 ohms ¿ Terminal Block 100 ohms Working environment ¿ Working Temperature -10¿ to +50¿ ¿ Storage Temperature -30¿ to +70¿ ¿ Humidity:0 to 95% Dimension 39mm*16mm*19mm(excluding connectors) Weight 58g/pair

Securnix Single Channel Waterproof UTP Video Balun Transceiver For CCTV -Twin Pack,, 1 Year Warranty Single Channel Passive Video Balun, Waterproof CCTV UTP Video Balun, Passive Video Transceiver Product Overview The Securnix Single Channel Passive Video Balun, Waterproof CCTV UTP Video Balun, Passive Video Transceiver is a passive transmission device that transmits video signal over unshielded twisted pair wires, point-to-point, for distances up to 1000 feet (330 m). It uses Category 5 UTP. It¿s easy to install and cost effective, and does not require power. Waterproof design makes it work in all weather. It is ideal for mounting directly on virtually all high-density DVRs without any additional cabling. Its crosstalk and noise immunity ensure quality video signals. Please Note: This item is sold as two per pack Highlights -Channel: 1 Channel -Impedance: Coax, Male BNC: 75 ohms/RJ45/Terminal Block: 100 ohms -Transmission Distance: 330m -Compatible: NTSC, PAL, and SECAM -Frequency Response: DC to 8MHz -Waterproof type -Sold as Two per pack Features: ¿ Full-motion CCTV video at distances up to 330m when used with any passive transceiver ¿ Up to 1500m with any active UTP video receiver ¿ Outstanding interference rejection, transient protection ¿ High quality image ¿ "Press-Fit" terminal block ¿ It can work as video transmitter or video receiver ¿ Compact size and easy installation ¿ Water-proof design Specifications: ¿ Video Format NTSC, PAL, and SECAM ¿ Frequency Response DC to 8MHz ¿ Attenuation 0.5dB typical ¿ CMRR 60 dB ¿ Wire Type UTP5 ¿ UTP Connection Tinned copper wire ¿ Power No power required ¿ Case ABS Plastic Impedance ¿ Coax, Male BNC-75 ohms ¿ Terminal Block 100 ohms Working environment ¿ Working Temperature -10¿ to +50¿ ¿ Storage Temperature -30¿ to +70¿ ¿ Humidity:0 to 95% Dimension 39mm*16mm*19mm(excluding connectors) Weight 58g/pair

Securnix Single Channel Waterproof UTP Video Balun Transceiver For CCTV -Twin Pack,, 1 Year Warranty Single Channel Passive Video Balun, Waterproof CCTV UTP Video Balun, Passive Video Transceiver Product Overview The Securnix Single Channel Passive Video Balun, Waterproof CCTV UTP Video Balun, Passive Video Transceiver is a passive transmission device that transmits video signal over unshielded twisted pair wires, point-to-point, for distances up to 1000 feet (330 m). It uses Category 5 UTP. It’s easy to install and cost effective, and does not require power. Waterproof design makes it work in all weather. It is ideal for mounting directly on virtually all high-density DVRs without any additional cabling. Its crosstalk and noise immunity ensure quality video signals. Please Note: This item is sold as two per pack Highlights -Channel: 1 Channel -Impedance: Coax, Male BNC: 75 ohms/RJ45/Terminal Block: 100 ohms -Transmission Distance: 330m -Compatible: NTSC, PAL, and SECAM -Frequency Response: DC to 8MHz -Waterproof type -Sold as Two per pack Features: • Full-motion CCTV video at distances up to 330m when used with any passive transceiver • Up to 1500m with any active UTP video receiver • Outstanding interference rejection, transient protection • High quality image • "Press-Fit" terminal block • It can work as video transmitter or video receiver • Compact size and easy installation • Water-proof design Specifications: • Video Format NTSC, PAL, and SECAM • Frequency Response DC to 8MHz • Attenuation 0.5dB typical • CMRR 60 dB • Wire Type UTP5 • UTP Connection Tinned copper wire • Power No power required • Case ABS Plastic Impedance • Coax, Male BNC-75 ohms • Terminal Block 100 ohms Working environment • Working Temperature -10℃ to +50℃ • Storage Temperature -30℃ to +70℃ • Humidity:0 to 95% Dimension 39mm*16mm*19mm(excluding connectors) Weight 58g/pair

Securnix Single Channel Passive Waterproof UTP Video Balun Transceiver For CCTV -Twin Pack,, 1 Year Warranty Single Channel Passive Video Balun, Waterproof CCTV UTP Video Balun, Passive Video Transceiver Product Overview The Securnix Single Channel Passive Video Balun, Waterproof CCTV UTP Video Balun, Passive Video Transceiver is a passive transmission device that transmits video signal over unshielded twisted pair wires, point-to-point, for distances up to 1000 feet (330 m). It uses Category 5 UTP. It’s easy to install and cost effective, and does not require power. Waterproof design makes it work in all weather. It is ideal for mounting directly on virtually all high-density DVRs without any additional cabling. Its crosstalk and noise immunity ensure quality video signals. Please Note: This item is sold as two per pack Highlights -Channel: 1 Channel -Impedance: Coax, Male BNC: 75 ohms/RJ45/Terminal Block: 100 ohms -Transmission Distance: 330m -Compatible: NTSC, PAL, and SECAM -Frequency Response: DC to 8MHz -Waterproof type -Sold as Two per pack Features: • Full-motion CCTV video at distances up to 330m when used with any passive transceiver • Up to 1500m with any active UTP video receiver • Outstanding interference rejection, transient protection • High quality image • "Press-Fit" terminal block • It can work as video transmitter or video receiver • Compact size and easy installation • Water-proof design Specifications: • Video Format NTSC, PAL, and SECAM • Frequency Response DC to 8MHz • Attenuation 0.5dB typical • CMRR 60 dB • Wire Type UTP5 • UTP Connection Tinned copper wire • Power No power required • Case ABS Plastic Impedance • Coax, Male BNC-75 ohms • Terminal Block 100 ohms Working environment • Working Temperature -10℃ to +50℃ • Storage Temperature -30℃ to +70℃ • Humidity:0 to 95% Dimension 39mm*16mm*19mm(excluding connectors) Weight 58g/pair

UniQue Face Plate Single Port with Shuttle Retail Box No Warranty   Specifications Single Port Face Plate Size:86 x 86mm Used for mounting on the front of network sockets Gives your home or office network a professional look For installing of modular jacks such as  RJ45, Cat5e, Cat6, Coaxial cable. Slip shuttered sockets to protect against dust Dual standard labelling (T568A/T568B colour coding standards) Easy attach ID labels slot to identify Network point