Carbide series mid tower

IN STOCK at supplier. If ordered before 12PM: DELIVERED next day (main centres) or 2-3 days (regional areas or large items) COLLECTION from Geewiz Same Day (aprox 4pm) Build and customize your own PC with the CC-9011077-WW Carbide Series 100R Silent Edition Mid-Tower Case from Corsair. With this Carbide Series Mid-Tower case you can create the PC to best suit your needs with a variety of available slots and ports. Whether you intend on installing 2.5" or 3.5" HDDs or SSDs you can take advantage of tool-free access making it easy to install and swap out drives You can also connect a variety of peripherals to the dual USB 3.0 ports located on the external side of the front panel. Keeping your PC cool has also been simplified as this Carbide Series case comes equipped with two 120 mm fans and can support a total of five fans ranging in size from 120 mm to 140 mm. The installed fans can then be controlled via the integrated 3-speed fan controller found on the back of the case. Once configured you can rest assured your PC will run both smoothly and quietly thanks to insulated, noise-isolating side panels. Keep it Quiet The side panels are insulated with noise-isolating materials to reduce noticeable fan noise. This essential if you're building a media PC, and just plain nice if don't want your system to contribute to environmental noise 3-Speed Fan Controller The secret to silent PC design is putting you in control. Keep the three-speed fan controller at its lowest setting for silent operation. When it's time to push your system hard, take it up a notch or two for on-demand cooling Storage, Simplified The mid-tower case features tool-free 3.5" and 5.25" drive installation, and all four hard drive trays provide solid-state drive support so you can mix and match to fit your needs. On the outside, dual USB 3.0 front panel ports give you quick and easy access to the latest high-speed portable hard drives and flash drives Creative Cooling Two 120mm fans are included, and five internal fan mounts let you customize your cooling to match your build. The case is designed to draw airflow directly to the GPU to help ensure that you and your graphics card will both keep your cool during intense gaming sessions Specifications: Form Factor: Mid-tower Motherboard Support: Mini-ITX, MicroATX, ATX Maximum GPU Length Top Slots: 16.3" (414 mm) Lower Slots: 10.8" (275 mm) Maximum CPU Cooler Height: 5.9" (150 mm) Maximum PSU Length: 9.1" (230 mm) Expansion Slots: 7 Drive Bays: 2 x 5.25" (133.4 mm), 4 x Combo 3.5"/2.5" (88.9/63.5 mm) Material: Steel Power Supply: ATX (not included) External Connections: 2 x USB 3.0, 1 x Headphone port, 1 x Microphone port Fan Mount Locations Front: 2 x 120/140 mm Top: 2 x 120 mm Rear: 1 x 120 mm Dimensions: 18.5 x 7.9 x 16.9" Weight: 4.8 kg What's in the Box: Carbide Series 100R Silent Mid Tower Case  Accessories box with screws Zip ties and other mounting hardware Warranty and Support Information

Corsair Carbide Series 330R Quiet Mid-Tower Case Low noise. High performance. The Carbide Series 330R Quiet PC Case is designed for systems that will go into media rooms, bedrooms, dorm rooms, or any place where both silence and performance are essential. Sound damped doors and panels and clever intake fan design are combined with generous expansion room and builder-friendly features to allow you to build a silent PC that can pack a lot of power for gaming and high-definition media streaming.   Superior sound absorption The front panel, top panel, and side doors are all lined with noise damping material, and the cleverly designed front intakes help reduce fan noise.   Smart airflow design The 330R incorporates a direct path between the included 140mm fan and your CPU and GPU, providing cold air directly to the hottest components with less restriction and less noise.   Five fan mount locations An intake and exhaust fans, you can go from there by installing two 120mm or 140mm fans in the front, and two 120mm or 140mm fans on the top panel.   Specifications:   Extensive noise damping material on front door, side panels, and top removable panel to quiet noisy internal components.   Front door is reversible, with angled air intakes to reflect internal noise away from the user.   Direct airflow to components – the front 140mm fan is unrestricted by hard drive cages and has a low-restriction dust filter in front for excellent cooling and low noise levels.   Removable top panel, with top fan mounts pre-drilled for 240mm or 280mm radiator compatibility.   Up to five separate fan mount locations   Front: 140mm    Top: Dual 120mm or 140mm   Rear: 120mm   USB 3.0 on front panel with internal motherboard connector   Four ” hard drive bays with full SSD compatibility.   Up to 450mm of space for long graphics cards.   Up to 160mm of space for CPU coolers.   Cable routing cutouts to keep your cables out of the airflow path.   Compatibility   E-ATX, ATX, Micro ATX and Mini ATX motherboards   2 Year Warranty 

Corsair Carbide Series 500R Mid-Tower Case Serious airflow has never looked this good. The Carbide Series 500R has outrageous cooling flexibility: there's a 200mm fan mounted on the side panel’s mesh screen for extra GPU cooling, a multi-channel fan controller, and removable and relocateable hard drive cages. The ability to move and remove hard drive cages not only improves airflow — it also allows you to install graphics cards of up to 452mm in length.   Future-Ready. Support for USB 3.0 and 2.5” SSDs is built-in. Two USB 3.0 connectors are provided on the front panel and connect directly to motherboards with compatible USB 3.0 headers. Integrated SSD support lets you install 2.5” solid-state drives in any of the hard drive bays, without having to deal with adapters.   Easy access. Thumb screws on the side panels and tool-free drive installation mean that you’ll spend less quality time with your screwdriver, and the integrated dust filters can be quickly removed for easy maintenance.   Looking good, inside and out. The beauty on the inside goes beyond the black-painted interior. Corsair’s innovative cable management system provides a straightforward way to route cables behind the motherboard, not across it where it can interfere with airflow and give your system a cluttered look. And since looks are an important part of any build, you’ll appreciate the ability to turn the front panel fan white LEDs on or off with the push of a button. Specifications: Dimensions: 20.5” x 8.1” x 20”   Supports graphics cards up to 452mm in length (with hard drive cage removed)   Multi-channel fan controller   Six 120mm/140mm fan mounts   Four 120mm fan mounts   200mm side panel fan, two front-mounted 120mm fans, and one rear 120mm fan Side panel with mesh fan mount locations   Four 5.25” drive bays Six 3.5” hard drive bays with 2.5” compatibility   Eight expansion slots Supports most 240mm dual radiators (15mm spacing)   Two-year warranty   Front I/O panel contains: Two USB 3.0 connectors One Firewire connector 3.5” headphone and microphone connector Power and reset switches Fan LED on/off switch   Compatibility ATX and Micro ATX motherboards   Weight  7.53kg

Corsair Carbide Series 500R White Mid-Tower Case Serious airflow has never looked this good. The Carbide Series 500R has outrageous cooling flexibility: there's a 200mm fan mounted on the side panel’s mesh screen for extra GPU cooling, a multi-channel fan controller, and removable and relocateable hard drive cages. The ability to move and remove hard drive cages not only improves airflow — it also allows you to install graphics cards of up to 452mm in length.   Future-Ready. Support for USB 3.0 and 2.5” SSDs is built-in. Two USB 3.0 connectors are provided on the front panel and connect directly to motherboards with compatible USB 3.0 headers. Integrated SSD support lets you install 2.5” solid-state drives in any of the hard drive bays, without having to deal with adapters.   Easy access. Thumb screws on the side panels and tool-free drive installation mean that you’ll spend less quality time with your screwdriver, and the integrated dust filters can be quickly removed for easy maintenance.   Looking good, inside and out. The beauty on the inside goes beyond the black-painted interior. Corsair’s innovative cable management system provides a straightforward way to route cables behind the motherboard, not across it where it can interfere with airflow and give your system a cluttered look. And since looks are an important part of any build, you’ll appreciate the ability to turn the front panel fan white LEDs on or off with the push of a button. Specifications: Dimensions: 20.5” x 8.1” x 20”   Supports graphics cards up to 452mm in length (with hard drive cage removed)   Multi-channel fan controller   Six 120mm/140mm fan mounts   Four 120mm fan mounts   200mm side panel fan, two front-mounted 120mm fans, and one rear 120mm fan Side panel with mesh fan mount locations   Four 5.25” drive bays Six 3.5” hard drive bays with 2.5” compatibility   Eight expansion slots Supports most 240mm dual radiators (15mm spacing)   Two-year warranty   Front I/O panel contains: Two USB 3.0 connectors One Firewire connector 3.5” headphone and microphone connector Power and reset switches Fan LED on/off switch   Compatibility ATX and Micro ATX motherboards  

Corsair Carbide Series SPEC-01  Mid-Tower Gaming Case Huge side panel window The aggressive look of the SPEC-01 makes it look great on the outside, but there’s beauty on the inside of a well-built system, too. The large side panel window lets you show it off.   LED front intake fan, with room for more The 120mm front intake fan is bathed in soft LED lighting, and it’s oriented to draw cool air directly across your graphics cards. And if you want even more ventilation, you can add a second 120mm fan or even dual 140mm fans.   Flexible cooling potential Like all Corsair cases, the SPEC-01 is designed for cooling, so you’re covered if you’re overclocking, running multiple GPUs, or if you just want more airflow. There are mounting points for up to five fans, including dual front 140mm or 120mm fans, dual 120mm fans on top, and a rear 120mm fan.   Multiple drive bays You might not build a system with four hard drives or SSDs, but with SPEC-01, you can if you want. In addition to the two standard 5.25” optical drive bays, there are four built-in ” combo drive bays for mechanical hard drives or solid-state drives.   Specifications:   Tons of fan mounts: Front – 2 x mm (1 x 120mm LED included) Top – 2 x 120mm Rear – 120mm   USB 3.0 front port with internal connector Large side panel window   Cable routing and CPU cooler backplate motherboard cutouts   Seven PCIe slots with room for long graphics cards up to 420mm long   Install up to four storage drives, your choice of 3.5” or 2.5”, each tray fits both   Dust filters for front and PSU intake   Compatibility   Mini ITX, Micro ATX, ATX motherboards   2 Year Warranty

Corsair  Carbide Series SPEC-03 Mid-Tower Gaming Case Huge side panel window The aggressive look of the SPEC-03 makes it look great on the outside, but there’s beauty on the inside of a well-built system, too. The large side panel window lets you show it off.   LED front intake fan, with room for more The 120mm front intake fan is bathed in soft LED lighting, and it’s oriented to draw cool air directly across your graphics cards. And if you want even more ventilation, you can add a second 120mm fan or even dual 140mm fans.   Flexible cooling potential Like all Corsair cases, the SPEC-03 is designed for cooling, so you’re covered if you’re overclocking, running multiple GPUs, or if you just want more airflow. There are mounting points for up to six fans, including dual front 140mm or 120mm fans, dual 120mm fans on top, a bottom-mounted 120mm fan, and a rear 120mm fan.   Multiple drive bays In addition to the two standard 5.25” optical drive bays, there are three 3.5” hard drive bays and two 2.5” solid-state drive bays.   Specifications:   Tons of fan mounts: Front – 2 x mm  Top – 2 x 120mm Rear – 120mm  Bottom – 120mm   1 x USB 3.0 front ports with internal connector   Large side panel window   Cable routing and CPU cooler backplate motherboard cutouts   Seven PCIe slots with room for long graphics cards up to 426mm long   Install up to three 3.5” and two 2.5” drives simultaneously – tool free   Dust filters for front and PSU intake   Compatibility   Mini ITX, Micro ATX, ATX motherboards   2 Year Warranty 

High airflow, industrial good looks, and an easy to use, modern layout. Carbide Series SPEC-03 has an extremely aggressive, game-oriented design and superior air cooling for your high-performance GPUs. The cleverly designed interior allows for the included LED-lit front intake fan to draw cold air directly to your graphics cards, and there’s room for up to six fans for massive cooling potential. There’s a huge windowed side panel that lets you admire your work, and the cable routing system and dust filters help you build a clean system and keep it clean, too. Tool-free installation of up to three 3.5” hard drives and two solid-state drives make it easy to add and upgrade storage. And, it’s easy to live with, too -- the dual front panel USB 3.0 ports let you take advantage of the latest high-speed storage devices. Huge side panel window The aggressive look of the SPEC-03 makes it look great on the outside, but there’s beauty on the inside of a well-built system, too. The large side panel window lets you show it off.   LED front intake fan, with room for more The 120mm front intake fan is bathed in soft LED lighting, and it’s oriented to draw cool air directly across your graphics cards. And if you want even more ventilation, you can add a second 120mm fan or even dual 140mm fans. Flexible cooling potential Like all Corsair cases, the SPEC-03 is designed for cooling, so you’re covered if you’re overclocking, running multiple GPUs, or if you just want more airflow. There are mounting points for up to six fans, including dual front 140mm or 120mm fans, dual 120mm fans on top, a bottom-mounted 120mm fan, and a rear 120mm fan.

CORSAIR Carbide Series SPEC-OMEGA RGB Tempered Glass Mid-Tower ATX Gaming Case 2x 3.5" | 2x 2.5" Drive Bays Front: 3x 120mm (2x 120mm HD RGB Installed) / 2x 140mm | Top: 2x 140 mm / 2x 120mm | Rear: 1x 120mm I/O: 2x USB3.0, 1x Headphone, 1x Mic, Power, Reset

Corsair Vengeance Series C70 Arctic White Mid-Tower Gaming Chassis Battle-Ready. When it’s time to take your competitive gaming on the road, the Vengeance C70 mid-tower PC case is a great choice. It’s crafted out of solid steel and made to survive trips with less wear and tear, and the ergonomic carry handles help you move your gear with confidence.   Air Cover High-performance gaming hardware requires high-performance cooling. Vengeance C70 is equipped with three 120mm fans out of the box, with mounting points for seven more to meet your exact air cooling demands.   Water Cover, too. Vengeance C70 is also outfitted for liquid cooling upgradeability. You get 240mm radiator compatibility on top of the case, and if that’s not enough, you can remove the lower hard drive cage to fit a second 240mm radiator for a dual-loop setup.   Water Cover, too. Vengeance C70 is also outfitted for liquid cooling upgradeability. You get 240mm radiator compatibility on top of the case, and if that’s not enough, you can remove the lower hard drive cage to fit a second 240mm radiator for a dual-loop setup.   Lock and load. Easy access side panels come off with quick-release latches. The optical drive bays and 3.5” hard drive bays are tool-free. Thumbscrews secure your graphics cards, and the hard drive cages can be easily removed for better airflow or additional expansion room. Cable routing tie-downs and built-in clamps keep your system tidy.   With so many usability features, the Vengeance C70 does what it’s supposed to do — stay out of your way while you build or upgrade.   Specifications:   Warranty Two years   Weight 20   Case Form Factor Mid-Tower   Dimensions 533mm x 232mm x 501mm   Case Motherboard Support Mini-ITX, MicroATX, ATX, E-ATX   Maximum GPULength 320mm   Maximum CPU Cooler Height 170mm   Maximum PSU Length 180mm   Case Expansion Slots 8   Case Drive Bays (xin   Case Material Steel   Case Power Supply ATX (not included)   External Connections (x2) USB 3.0    (x1) Headphone Port    (x1) Microphone Port   Fan Mount Locations  Front: (xmm  Top: (xmm  Rear: (xmm  Bottom: (xmm  Side: (xmm  MId: (xmm   Radiator Mount Locations  Top: mm  Rear: 120mm  Bottom: mm   Compatible Corsair Liquid Coolers  H55, H60, H75, H80i, H90, H100i, H105, H110

Corsair Vengeance Series C70 Gunmetal Black Mid-Tower Gaming Chassis  Battle-Ready. When it’s time to take your competitive gaming on the road, the Vengeance C70 mid-tower PC case is a great choice. It’s crafted out of solid steel and made to survive trips with less wear and tear, and the ergonomic carry handles help you move your gear with confidence.   Air Cover High-performance gaming hardware requires high-performance cooling. Vengeance C70 is equipped with three 120mm fans out of the box, with mounting points for seven more to meet your exact air cooling demands.   Water Cover, too. Vengeance C70 is also outfitted for liquid cooling upgradeability. You get 240mm radiator compatibility on top of the case, and if that’s not enough, you can remove the lower hard drive cage to fit a second 240mm radiator for a dual-loop setup.   Gear Up. A case is as much a part of your armory as any other component. With internal USB 3.0 connectors for modern motherboards, native SSD compatibility, eight expansion slots and room for long graphics cards, the C70 stands ready to take on any challenger.   Lock and load. Easy access side panels come off with quick-release latches. The optical drive bays and 3.5” hard drive bays are tool-free. Thumbscrews secure your graphics cards, and the hard drive cages can be easily removed for better airflow or additional expansion room. Cable routing tie-downs and built-in clamps keep your system tidy.   With so many usability features, the Vengeance C70 does what it’s supposed to do — stay out of your way while you build or upgrade.   Specifications:   Warranty Two years   Weight 8.3kg   Case Form Factor Mid-Tower Dimensions 533mm x 232mm x 501mm   Case Motherboard Support Mini-ITX, MicroATX, ATX, E-ATX   Maximum GPU Length 320mm   Maximum CPU Cooler Height 170mm   Maximum PSU Length 180mm   Case Expansion Slots 8   Case Drive Bays (xin (x6) Combo 3.5in/2.5in   Case Material Steel   Case Power Supply ATX (not included)   External Connections (x2) USB 3.0    (x1) Headphone Port    (x1) Microphone Port   Fan Mount Locations Front: (xmm  Top: (xmm  Rear: (xmm  Bottom: (xmm  Side: (xmm  MId: (xmm   Radiator Mount Locations  Top: mm  Rear: 120mm  Bottom: mm   Compatible Corsair Liquid Coolers H55, H60, H75, H80i, H90, H100i, H105, H110

Quality Construction The Obsidian Series 650D mid-tower case is manufactured with strong, stamped steel parts for increased rigidity, and coated in a black textured paint. The front panel features a beautiful black brushed aluminum faceplate to bring a subtle elegance to your next build.   Excellent Cooling A large, black 200mm intake fan hides behind the front dust filter, quietly pushing vast amounts of air over your hard drives and video cards. The air is then exhausted by a second 200mm fan on top of the case, and a rear 120mm fan. The top fan can be replaced by dual 120mm or 140mm fans, and is pre-spaced for a dual radiator if you’re interested in watercooling. And all fans are controlled by a three-mode, four-channel fan controller should you want to make your own choice between noise and performance.   Award-Winning Features The 650D is a member of the award-winning Obsidian Series of cases from Corsair. The Obsidian Series is more than just a name — it means real features that can benefit even the most experienced system builder.   Specifications:   Warranty Two years   Weight kg   Color Black   Case Form Factor Mid-Tower   Dimensions 546mm x 229mm x 521mm   Case Motherboard Support Mini-ITX, MicroATX, ATX   Maximum GPU Length 340mm   Maximum CPU Cooler Height 185mm   Maximum PSU Length 220mm   Case Expansion Slots 8   Case Drive Bays (xin   (x6) Combo 3.5in/2.5in   Case Material Brushed Aluminum and Steel   Case Power Supply ATX (not included)   External Connections  (x2) USB 2.0  (x2) USB 3.0  (x1) Fan Controller  (x1) Hot Swap Dock (x1) Headphone Port  (x1) Microphone Port   Fan Mount Locations  Front: (xmm  Top: (xmm or (xmm  Rear: (xmm   Radiator Mount Locations Top: mm   Compatible Corsair Liquid Coolers H55, H60, H75, H80i, H90, H100i, H105, H110

Corsair Graphite Series 230T Rebel Orange Mid-Tower Chassis  Leading-edge styling Graphite Series cases meet at the intersection of high performance and dramatic design. The front intake fans are bathed in soft LED light, and the sculpted exterior helps you build a fast system that looks fast, too.   Flexible cooling potential The 230T comes with dual 120mm front intake fans with LED lighting, and a rear 120mm exhaust fan. There’s room to add two 120mm or 140mm fans on the top, and a 120mm or 140mm fan on the bottom.   Easy system builds, maintenance and upgrades The side panels, PCI-E expansion slots, and drive bays are all tool-free. Cable routing cutouts are provided for clean-looking builds and better airflow, and there’s a CPU cutout to allow for cooling upgrades without removing the motherboard. The intake fan filters help keep dust out of the interior, and they’re easy to remove for cleaning.   Dedicated SSD bays The 230T offers four 2.5” drive bays for solid-state storage. That’s in addition to the four 3.5” bays and three 5.25” optical drive bays.   Specifications:   Warranty Two years   Weight 6.05kg   Color Rebel Orange   Case Form Factor Mid-Tower   Dimensions 505mm x 210mm x 440mm   Case Motherboard Support Mini-ITX, MicroATX, ATX   Maximum GPU Length 360mm   Maximum CPU Cooler Height 165mm   Maximum PSU Length 200mm   Case Expansion Slots 7   Case Drive Bays  (xin (x4) 3.5in (x4) 2.5in   Case Material Steel   Case Power Supply ATX (not included)   External Connections (x2) USB 3.0  (x1) Headphone Port  (x1) Microphone Port   Fan Mount Locations Front: (xmm  Top: (xmm  Rear: (xmm Bottom: (xmm   Radiator Mount Locations Top: mm  Rear: 120mm   Compatible Corsair Liquid Coolers  H55, H60, H75, H80i  

Corsair Graphite Series 230T Battleship Grey Mid-Tower Chassis  Leading-edge styling Graphite Series cases meet at the intersection of high performance and dramatic design. The front intake fans are bathed in soft LED light, and the sculpted exterior helps you build a fast system that looks fast, too.   Flexible cooling potential The 230T comes with dual 120mm front intake fans with LED lighting, and a rear 120mm exhaust fan. There’s room to add two 120mm or 140mm fans on the top, and a 120mm or 140mm fan on the bottom.   Easy system builds, maintenance and upgrades The side panels, PCI-E expansion slots, and drive bays are all tool-free. Cable routing cutouts are provided for clean-looking builds and better airflow, and there’s a CPU cutout to allow for cooling upgrades without removing the motherboard. The intake fan filters help keep dust out of the interior, and they’re easy to remove for cleaning.   Dedicated SSD bays The 230T offers four 2.5” drive bays for solid-state storage. That’s in addition to the four 3.5” bays and three 5.25” optical drive bays.   Specifications:   Warranty Two years   Weight 6.05kg   Color Rebel Orange   Case Form Factor Mid-Tower   Dimensions 505mm x 210mm x 440mm   Case Motherboard Support Mini-ITX, MicroATX, ATX   Maximum GPU Length 360mm   Maximum CPU Cooler Height 165mm   Maximum PSU Length 200mm   Case Expansion Slots 7   Case Drive Bays  (xin (x4) 3.5in (x4) 2.5in   Case Material Steel   Case Power Supply ATX (not included)   External Connections (x2) USB 3.0  (x1) Headphone Port  (x1) Microphone Port   Fan Mount Locations Front: (xmm  Top: (xmm  Rear: (xmm Bottom: (xmm   Radiator Mount Locations Top: mm  Rear: 120mm   Compatible Corsair Liquid Coolers  H55, H60, H75, H80i

Corsair Graphite Series 230T Black Mid-Tower Chassis  Leading-edge styling Graphite Series cases meet at the intersection of high performance and dramatic design. The front intake fans are bathed in soft LED light, and the sculpted exterior helps you build a fast system that looks fast, too.   Flexible cooling potential The 230T comes with dual 120mm front intake fans with LED lighting, and a rear 120mm exhaust fan. There’s room to add two 120mm or 140mm fans on the top, and a 120mm or 140mm fan on the bottom.   Easy system builds, maintenance and upgrades The side panels, PCI-E expansion slots, and drive bays are all tool-free. Cable routing cutouts are provided for clean-looking builds and better airflow, and there’s a CPU cutout to allow for cooling upgrades without removing the motherboard. The intake fan filters help keep dust out of the interior, and they’re easy to remove for cleaning.   Dedicated SSD bays The 230T offers four 2.5” drive bays for solid-state storage. That’s in addition to the four 3.5” bays and three 5.25” optical drive bays.   Specifications:   Warranty Two years   Weight 6.05kg   Color Rebel Orange   Case Form Factor Mid-Tower   Dimensions 505mm x 210mm x 440mm   Case Motherboard Support Mini-ITX, MicroATX, ATX   Maximum GPU Length 360mm   Maximum CPU Cooler Height 165mm   Maximum PSU Length 200mm   Case Expansion Slots 7   Case Drive Bays  (xin (x4) 3.5in (x4) 2.5in   Case Material Steel   Case Power Supply ATX (not included)   External Connections (x2) USB 3.0  (x1) Headphone Port  (x1) Microphone Port   Fan Mount Locations Front: (xmm  Top: (xmm  Rear: (xmm Bottom: (xmm   Radiator Mount Locations Top: mm  Rear: 120mm   Compatible Corsair Liquid Coolers  H55, H60, H75, H80i

The Obsidian Series 800D is built to last through years of motherboard, power, memory, cooling, and component upgrades.   The steel structure has a matte black coating both inside out and is finished with a brushed aluminum faceplate for a professional look that's both serious and awe-inspiring. A windowed side panel makes it easy to show off your work.   Three Isolated Cooling Zones The power supply compartment, main compartment and the SATA bays each have dedicated cooling subsystems to prevent heat buildup.   A dust-filtered 140mm fan draws in cold air at the bottom of the case and exhausts it at the rear and top. This clever design forces fresh air directly over the graphics card and CPU. The SATA hot-swap bays are cooled by a separate 140mm fan which vents from the case via a sealed chamber and prevents the heat generated by the drives from entering the main compartment. The power supply compartment has its own dedicated intake and exhaust, also isolated from the main compartment.   Need even more cooling performance? The Obsidian Series 800D has pre-drilled support for top-mounted single, dual, and triple radiators, or up to three additional 120mm fans.   Advanced Features for Extreme Flexibility A four-drive SATA3 hot-swap drive bay sits in the front of the case, making it easier to install or swap hard drives on the fly. A unique cable routing system virtually eliminates cable clutter that can impede airflow. The tool-free design allows for easy entry, easy access, and quick installation of 5.25” drives. Specifications: Warranty Two years   Weight 16.2kg   Color Black   Case Form Factor Full-Tower   Dimensions 609mm x 229mm x 609mm   Case Motherboard Support Mini-ITX, MicroATX, ATX, E-ATX   Maximum GPU Length 430mm   Maximum CPU Cooler Height 180mm   Maximum PSU Length 240mm   Case Expansion Slots 7+1   Case Drive Bays (xin (x2) 3.5in (x4) Combo 3.5in/2.5in   Case Material Brushed Aluminum and Steel   Case Power Supply ATX (not included)   External Connections (x2) USB 2.0  (x2) USB 3.0  (x1) Hot Swap Dock  (x1) Headphone Port  (x1) Microphone Port   Fan Mount Locations Top: (xmm  Rear: (xmm  Bottom: (xmm Mid: (xmm and (xmm   Radiator Mount Locations Top: 360mm   Compatible Corsair Liquid Coolers H55, H60, H75, H80i, H90, H100i, H105