Camera frame holder j

Product Features: - Brand new and high quality replacement parts. - Perfectly fit for Samsung J3 2016. - Used to Replace Your broken, cracked, marked Rear Back Camera Lens Lid Cover. - Tested before shipping and guaranteed 100% working. - Come with adhesive for Easy installation.   Color: Silver(Frame Holder),Black(Glass Lens Cover) Compatible with:for Samsung J3 2016 Size(Lens Cover): 8x8mm/0.31x0.31"   Packaged included: 1x Camera Glass Lens Cover(With adhesive) 1x Frame Holder  

FREE* Shipping on this item This product is dispatched  in 10 to 15 working days We urge you to please read shipping details before placing your order. --------------------------------------- About the product 1. High quality back camera lens frame holder for Samsung Galaxy Note II / N7100 2. Replace your broken damaged or unusable camera lens frame with a new one 3. Each item will be checked and in good condition before shipping 4. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts --------------------------------------- See what else we're selling

FREE* Shipping on this item This product is dispatched  in 10 to 15 working days We urge you to please read shipping details before placing your order. --------------------------------------- About the product 1. High quality back camera lens frame holder for Samsung Galaxy S IV / i9500 2. Replace your broken, damaged or unusable camera lens frame with a new one 3. Each item will be checked and in good condition before shipping 4. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts --------------------------------------- See what else we're selling

Product Features: - Brand new and high quality replacement parts. - Perfectly fit for Samsung J5 2016. - Used to Replace Your broken, cracked, marked Rear Back Camera Lens Lid Cover. - Tested before shipping and guaranteed 100% working. - Come with adhesive for Easy installation.   Color: Black&Silver Compatible with:for Samsung J5 2016 Size(Lens Cover): 9x9mm/0.35x0.35"   Packaged included: 1x Camera Glass Lens Cover(With adhesive) 1x Frame Holder

1?Brand new and High quality.The adhesive is pre-installed on the Frame holder. it is easy to replace it. (Samsung Galaxy S7 G930/ S7 Edge G935 Camera Lens Glass) 2?Equipped with complete tools, convenient and quick for replacement Easy to install, need to be careful. 3?Compatible with: Samsung Galaxy S7 G930 / S7 Edge G935 4?Great choice to replace your cracked, damaged or malfunctioned rear camera lens, made of glass that matches the S7 G930/ S7 Edge G935. 5? DO NOT forget to remove protective plastic FILM from the lens to avoid blurry effect. 6?Memo: This is not an easy job for someone who has no technical skills with Disassembling or Assembling Cellphones/mobile phones, so only purchase this item if you know how to install it. Highly recommend professional installation.

FREE* Shipping on this item This product is dispatched  in 10 to 15 working days We urge you to please read shipping details before placing your order. --------------------------------------- iPartsBuy Back Camera Lens Frame Holder for Samsung Galaxy Note III / N9000 (White + Gold) --------------------------------------- See what else we're selling

FREE* Shipping on this item This item is sold brand new. It is ordered on demand from our supplier and is usually dispatched in 10 to 15 working days. We urge you to please read shipping details before placing your order. --------------------------------------- iPartsBuy Back Camera Lens Frame Holder for Samsung Galaxy Note III / N9000 (Black + Gold) --------------------------------------- See what else we're selling

To repair scratches / damaged camera lens that would give you bad or blurry pictures when using phone camera, come with pre-installed double side adhesives on one side of the glass camera lens, also included the bezel holder to fit in the the lens, and this would shown the camera from outside a brand new look. Perfect Fit, your camera lens will look as clear and clean new as when you first get your phone. Free WF Pen.

Specification: Compatible With:  Samsung Galaxy S6 G9200 Color: Gold, Dark bule Replace your old or defective camera lens cover & frame holder.   Please Note: We recommend that this item is installed by a specially trained technician, and we will not accept liability for any damages that may be caused by the improper installation of this accessory.   Package Included: 1x Camera Glass Lens Cover  

Wht's in the package? 1 x glass lens 1 x gold camera frame 1 x adhesive glue sticker 1 x gold usb cover flap 1 x white plastic holder 1 x screw 1 x screw driver 1 x Ewparts clean cloth

XCSOURCE Standard Border Frame Mount Protective Housing Case For Gopro Hero 3 3 OS81 Brand New In Box (Sealed but sometimes supplied without film wrapping) THIS PRODUCT IS IMPORTED ON ORDER - PLEASE SEE "SHIPPING & PAYMENT" FOR DELIVERY TIMES Product Description Features: Standard Frame Housing: 100% Brand New and High Quality The Frame mount is the smallest, lightest way to mount your HERO 3 3 camera. Dimension: 2.4" L x 1.7" W x 0.9" H (63 x 45 x 24 mm). Sleek frame design for low profile, compact mounting Engineered for optimal sound at speed Note: The Frame Mount is not waterproof and not optimized for use in conditions where dirt and other objects can damaged the camera lens. Note: This item is not manufactured by GoPro. It is 3rd party manufacture to compatible with GoPro Package Includes: 1 x Frame Mount Housing 1 x Buckle Tripod Cradle Holder Mount 1 x Long Set Screw

HY008 mobile phone interface is a fixed barcket of microscope & telescope connected to mobile phone.This interface can be fixed mobile phone easy to the microscope(telescope)eyepiece,so that to watch and take pictures conveniently.   Features: The special removable gluefixed,is compatible with any mobile phone. Compatible with almost all microscope,telescope Self centering,assembly and disassembly easily With tripod interface,can be used as mobile phone camera bracket   Application range: Outer diameter of eyepiece:27-42mm.Compatible with various microscope,telescope Width of mobile phone: 40 - 100mm. Compatible with mobile phone in 6" and below.   Installation steps: 1.Put mobile phone on the bracket,make the lens aim to the hole in center,and then push the bottom of 3 Blue sliders from three directions,so be sure it can clamping mobile phone tightly. Next,remove mobile phone,push the sliders inward 2 mm,and tighten the screws.Or adhesive the removable glue to the bracket,mobile phone within skin attached to the bracket,and the lens is aligned to the center of lens hole. Removable surface of removable glue can be reused,wash the surface with water can recovery viscosity 2.Take the wedge sleeve on the outside of the eyepiece(notice the wedge sleeve direction.If the outer diameter of eyepiece is too small,have to fix the silicone rubber gasket firstly) 3.Take the bracket sleeve onto the wedge sleeve around 1/3,and then screw up clockwise by holding the eyepiece and silicone wedge sleeve. 4.Open the mobile phone camera,fix on the bracket,and then adjusting the height of bracket by pressing slowly downward,until the circular frame appearing on the mobile phone screen clearly.   Package includes: 1x Microscope and Telescope Mobile Phone Interface 1x Removable glue   More detail:

Description: HY008 mobile phone interface is a fixed barcket of microscope & telescope connected to mobile phone.This interface can be fixed mobile phone easy to the microscope(telescope)eyepiece,so that to watch and take pictures conveniently. Features: The special removable gluefixed,is compatible with any mobile phone. Compatible with almost all microscope,telescope Self centering,assembly and disassembly easily With tripod interface,can be used as mobile phone camera bracket Application range: Outer diameter of eyepiece:27-42mm.Compatible with various microscope,telescope Width of mobile phone: 40 - 100mm. Compatible with mobile phone in 6" and below. Installation steps: 1.Put mobile phone on the bracket,make the lens aim to the hole in center,and then push the bottom of 3 Blue sliders from three directions,so be sure it can clamping mobile phone tightly. Next,remove mobile phone,push the sliders inward 2 mm,and tighten the screws.Or adhesive the removable glue to the bracket,mobile phone within skin attached to the bracket,and the lens is aligned to the center of lens hole. Removable surface of removable glue can be reused,wash the surface with water can recovery viscosity 2.Take the wedge sleeve on the outside of the eyepiece(notice the wedge sleeve direction.If the outer diameter of eyepiece is too small,have to fix the silicone rubber gasket firstly) 3.Take the bracket sleeve onto the wedge sleeve around 1/3,and then screw up clockwise by holding the eyepiece and silicone wedge sleeve. 4.Open the mobile phone camera,fix on the bracket,and then adjusting the height of bracket by pressing slowly downward,until the circular frame appearing on the mobile phone screen clearly. Package includes: 1x Microscope and Telescope Mobile Phone Interface 1x Removable glue More detail:

  Product description Application Fields:  Intraoral camera systems; motor vehicle detector; sewer pipeline detector; search and rescue; criminal and custom detector; archaeological detect; the PCB detection; home care; aviation and space industries; care and tractors industries; petroleum drilling industries; constructions Inspection of hard-to-reach or hard-to-see area or equipment  Specifications:    Cable length:5M  Lens Diameter: 8.0MM  Sensor: 2.0 Megapixel HD  Resolution: 640*480/1280*720 /1280*960 /1280*1024  Sensor Size: 1/6 inch  Frame Rate: 30fps  View Angle: 70 degree  Waterproof level: IP67  Built-in 6 LED light  Operating Temperature:0 degree to 70 degree  Interface: USB/Micro-USB  phone Android System, support OTG, and phone camera is compatible with UVC.  Windows system: Windows 7/8/10/XP/VISTA  Note: (Not Support iPhone Apple IOS device)  Photo Format: JPEG  Vedio Format: AVI  Product Contains Items:  *1 x USB Inspection Camera  *1 x English Manual  *1 x Holder  *1 x Mirror  *1 x Hook

Overview: The 2in1 Lenses is perfect for iPhone 5 & 5s, iphone 4 & 4s, Samsung S3, S4, Note1, Note2, Note3 that includes Fisheye, Telephoto and Macro Lenses in a small, convenient package that easily fits in your pocket. The Wide Lens is a high definition of the farther scenery, so you can catch the beautiful scenery from a distance. The Fisheye Lens captures approximately a 180 degree field-of-view and produces some striking images. Fish Eye is the largest of the three lenses and the Wide Angle and Macro Lens are a precision set as shown in the photo, with the Wide Angle Lens screwed on the Macro lens, which in turn is permanently seated within the holder. Unscew the Wide Angle lens in the direction shown on the barrel of the lenses to access the Macro Lens. The Macro Lens concealed under the Wide Angle lens applies roughly a 10X multiplier and allows you to focus the iPhone 5 within 12-15mm of the subject. Easy attachment and detachment of the lenses to the phone. Assures a higher refractive index, resulting in true colours and higher resolution. Lens: multi-coated optical glass Lens cap: high-strength engineering plastic Frame: aluminum Quick-change camera lenses for iPhone 5 & 5s, iPhone 4 & 4s, Samsung S3, S4, Note 1, Note 2, Note 3 & others Mobile Phones.