Burnt case greene

UN1372 Fibers, animal or Fibers, vegetable burnt, wet or damp, Spontaneously Combustible (4), Hazchem Placard Hazchem Placards: Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) ¿ These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

UN1372 Fibers, animal or Fibers, vegetable burnt, wet or damp, Spontaneously Combustible (4), Hazchem Placard Hazchem Placards: Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) — typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) — These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) — typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck — this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) — typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) — typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck — this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

SoundOriginal Computer Case LED Light ATX Power Supply Reset HDD Switch Cable 50cm Long Red Green A DETAILS Desktop PC motherboard ATX power reset switch cable; red green LED indicator; momentary switch button; fits most desktop computer host cases with front panel button. Product Name: PC ATX Power Reset Switch Cable;Design: H.D.D LED; Power LED+; Power LED-; Reset SW; Power SW LED Number: 2;LED Light Color: Red; Green Cable Length: 50cm / 20'';Material (External): Plastic Weight: 15g Package Content: PC ATX Power Reset Switch Cable Sometimes it's the small parts that can make a big difference. Replace your burnt out LEDs and worn out switches with this handy ATX front bezel wire kit. The five-piece kit comes with two switches (Power; Reset) and three LEDs (Power; Hard Drive Activity; Sleep). Each switch and LED is clearly labeled to make installation easy. Make sure your computer still looks and works as great as the day you bought it with this replacement kit. The Fine Print This product is imported from the USA. We do not carry stock in South Africa. Warranties and guarantees are valid only in the USA. In order to obtain a warranty repair you will be required to ship your product to the USA at your cost. We can assist you in the event this happens. We use only the best couriers to deliver your products safetly. Delivery takes approximately 2-3 weeks. Sometimes there are delays (hey - this is Africa) but we will always keep you informed along the way. We guarantee authenticity on every product sold. We guarantee delivery in perfect condition. We guarantee you will be happy with everything or we will give you a full refund. That's our promise to you. We have been in the import game for over 10 years. Buy with confidence. AMAZON

Descriptions: - These cases will keep your nozzle clean and free of burnt on blackened plastic.  - These also offer a huge boost in temperature stability, particularly if you use high airflow cooling around the nozzle to cool the print. - Made of a heat-resistant, non-stick silicone material our will repel build-up of molten plastic. This really helps with sticky materials like Co-Polyesters and filled materials that like to build up on nozzles Specifications -  Color: Coffee -  Material: Silica gel -  Length: 20 mm -  Width: 20 mm -  Height: 10 mm - Temperature resistance up to 280 - Fit For: MK9 Heater Block Note: 1.The heater block inside NOT included. 2.Manual measuring, please allow 1 ~ 3 mm error,thank you. Package Included: 3 x  MK9 Silicone Protective Case

Specifications: Product Name:  E3D-V6  Aluminum Block Silicone Sleeve  3D Printer Material: Silicone Color: Green Length: 22 mm Width: 17 mm Height: 12 mm High Temperature Resistance: 260   Features:   - Prevent hot, protect the heating block. - These cases will keep your nozzle clean and free of burnt on blackened plastic.  - These also offer a huge boost in temperature stability, particularly if you use high airflow cooling around the nozzle to cool the print. - Made of a heat-resistant, non-stick silicone material we will repel build-up of molten plastic. This really helps with sticky materials like Co-Polyesters and filled materials that like to build up on nozzles. Note: * The heater block inside NOT included. * Manual measuring, please allow 1 ~ 3 mm error,thank you.   Package Included:   3 x  Green  Silicone Case