Brake fluid replacement

Brake Fluid Tester 5 LED Car Vehicle Testing Tool For DOT3 / DOT4 Description: The brake fluid tester is suitable for determining brake fluid quality. According to the variation of electrical conductivity to determine the moisture content of the brake fluid change. It through the light-emitting diodes clearly shows the degree of moisture. High content moisture will reducing the boiling point, and then affect the braking performance. Red indicates brake fluid need to be replaced immediately, green indicates brake fluid in good condition, yellow indicates brake fluid stays good, but is going to change. Designed without cable connector, fast and convevient. Power supply: 1.5V "AAA" x 1 (battery included) Suitable for DOT3 / DOT4 testing Directions for using: 5 LEDs indicating the water % in the brake fluid: 0% LED: Battery is OK,and there is on water content in brake fluid 1% LED: Water Content, H2O¿1%, brake fluid is above standard 2% LED: Water Content, H2O¿2%, still can use it 3% LED: Water Content Water Content, H2O¿3%, brake fluid should be changed 4% LED: Water Content Water Content, H2O¿4%, brake fluid must be changed Note: After every testing,you need clean the test head with dry cloth or paper. Package included: 1 x Brake fluid tester (1x AAA battery included)

Brake Fluid Premium,non-petroleum automotive brake fluid, designed for a wide range of conventional hydraulic brake and clutch system in Vehicles and equipment. Meets the Battery_and_Power standard of FMVSS 116 Dot 3 and Fmvss 116 Dot 4 SABS SAE J1703 Specifications

Brand new brake fluid reservoirs. Universal and will fit on most bikes. Complete with pipe and bracket. Only these 3 available.

Description: The tester can be used as a digital brake fluid tester suitable for determining brake fluid quality. Developed for professional use in automotive repair shops and in servicing. Quality is tested and indicated on five LEDs in terms of "percent of water in the brake fluid". Ready for Brake Fluid Test Unscrew the brake fluid reservoir,and pull off the cap of the Brake fluid tester. Dip the test probes into the brake fluid up to the plastic rim of the device. To Check Fluid Quality Press the button for power on,green LED will light up. Insert teh tester into reservoir for one second then the test result will be correctly indicated by LEDs. Repress the button for power off.The tester will automatically power off after about 15 seconds of inactivity. Product Labelling Indication Green: Battery OK,i.e.: No water contained in the brake fluid. Yellow: Less than 1% of water content in the brake fluid. Yellow/yellow: Approx.2% of water content in brake fluid. Yellow/yellow/red: Approx.3% of water content in brake fluid. The brake fluid should be changed. Yellow/yellow/red/red: At least 4% of water content in brake fluid. The brake fluid should be changed urgently! Extreme danger! 1x AAA Battery (Not Included) Specification Color Black Quantity 1Pc LED 5 Package includes: 1x LED Car Brake Fluid Tester Delivery: Delivery to countries utilizing ePacket such as the USA, Australia, Austria, Belgium, Canada, Denmark, Finland, France, Germany, Greece, Hong Kong, Hungary, Ireland, Israel, Italy, Japan, Korea, Luxembourg, Malaysia, Mexico, Netherlands, New Zealand, Norway, Poland, Portugal, Russia, Saudi Arabia, Singapore, Spain, Sweden, Switzerland, Thailand (currently in a trial run), Turkey, Ukraine And the United Kingdom delivery can be within 7-14 days. Other countries will take 50-60 days, although we have experienced some deliveries in 30 days. Please note that there can be additional delays at customs and we can not be held accountable for such actions. Additional taxes and duties may be calculated by customs which will be for the buyer's account. Delivery is GUARANTEED, and should you not receive your order, a FULL REFUND will be made. Tracking: For every order a tracking number will be supplied as soon as the package has been shipped. The package can be tracked on www.17track.com You can also download the mobile app where the package can be tracked and to be updated of any status changes with push notification. Express delivery: We have the option to get your purchase delivered speedily. Please contact us to request a quote on express delivery.

LED Car Brake Fluid Tester Pen Examiner Electronic Tool Detector Universal Vehicle Automotive Description: The tester can be used as a digital brake fluid tester suitable for determining brake fluid quality. Developed for professional use in automotive repair shops and in servicing. Quality is tested and indicated on five LEDs in terms of"per cent of water in the brake fluid". Ready for Brake Fluid Test Unscrew the brake fluid reservoir,and pull off the cap of the Brake fluid tester. Dip the test probes into the brake fluid up to the plastic rim of the device. To Check Fluid Quality Press the button for power on,green LED will light up. Insert teh tester into reservoir for one second then the test result will be correctly indicated by LEDs. Repress the button for power off.The tester will automatically power off after about 15 seconds of inactivity. Product Labelling Indication Green: Battery OK,i.e.: No water contained in the brake fluid. Yellow: Less than 1% of water content in the brake fluid. Yellow/yellow: Approx.2% of water content in brake fluid. Yellow/yellow/red: Approx.3% of water content in brake fluid. The brake fluid should be changed. Yellow/yellow/red/red: At least 4% of water content in brake fluid. The brake fluid should be changed urgently! Extreme danger! 1x AAA Battery (Not Included) Specification Color Black Quantity 1Pc LED 5 Package included: 1x LED Car Brake Fluid Tester

Description: According to the variation of electrical conductivity to determine the moisture content of the brake oil change. High moisture will lead to the boiling point is reduced, affect the braking performance Meanings of indicator light: Green: Battery OK, i.e.: No Water Contained in the Brake Fluid Green / Yellow: Less than 1% of Water Content in Brake Fluid Green / Yellow / Yellow: Approximately 2% of Water Content in Brake Fluid Green / Yellow / Yellow / Red: Approximately 3% of Water Content in Brake Fluid; The Brake Fluid Should be Changed Green / Yellow / Yellow / Red / Red: at least 4% of Water Content in Brake Fluid; The Brake Fluid Must be Changed Urgently, Extreme Danger. Note: Remember to dry this tester before using in brake fluid. Package Includes: 1 x Brake Fluid Test Pen(battery included)

Electronic LED Brake Fluid Tester   The electronic LED brake fluid tester is used to determine brake fluid quality. The tester determines the conductivity within the brake fluid to calculate the water content present, and therefore the state of the brake fluid. The light-emitting diodes easily and conveniently indicate the level of water present in the brake fluid and the quality of the brake fluid.

Buy MT310 Brake Fluid Test Pen Brake Fluid Appraiser Brake Fluid Quality Tester for R215.51

Buy YAWOA BF200 Intelligent Brake Fluid Detector Brake Fluid Detection Pen Brake Fluid Moisture Detec... for R735.45

This nifty little gadget is used to check the quality of your car's brake fluid to ensure safe driving. It will test the water content in the brake fluid and will warn you when the brake fluid is not safe to use anymore. Features: The LED indicators will show the percentage of water in the brake fluid with 3 colours green yellow and red Calibrated for cars using DOT4 and DOT3 brake fluids. Easy and quick to use. CE and RoHS approved. Protective cap included. Takes 1 x AAA/1.5V battery (not included) Contents: Brake Fluid Tester Pen User manual

Front Brake Fluid Reservoir Cap For Harley Davidson Electra Glide Road King 200 Package weight: 0.08 kg Specification: Product Name: Brake fluid reservoir cap Material: Aluminum alloy Color: Black Length: 7.4cm/2.91inch Height: 4.93cm/1.94inch Placement on Vehicle: Front Fitment: For Harley Davidson Electra Glide 2007-2012 For Harley Davidson Road King 2007-2012 Note: We provide clear pictures,measurement where possible, please confirm this item you need before payment. The actual item maybe has slight color distinct with listing image due to different computer screens,thanks for your understanding. The size of item is manual measurement,please allow 0.5-1inch difference. Instruction is not included in the package.Professional installation is high recommended. Package Included: 1 X Brake Fluid Reservoir Cap 2 X Screws Click here for more deals Front Brake Fluid Reservoir Cap For Harley Davidson Electra Glide Road King 200 Front Brake Fluid Reservoir Cap For Harley Davidson Electra Glide Road King 200

Main Features ﾡ￱ This brake bleeding device with the refill container can vent your brakes without any problems, only a standard compressed air supply of 6-12 bar is needed ﾡ￱ The braking system can also be used for clutch and steering systems ﾡ￱ The liquid is removed from the bleed nipple so that brake fluid can be changed completely ﾡ￱ The size of refill container is 30 x 6.8 x 6.8cm Specifications ? ﾡ￱ 1/4 "(0.64cm) female thread ﾡ￱ Working pressure: 6-12bar (87 - 174 psi) ﾡ￱ Negative pressure: 60% ﾡ￱ Air consumption: approx. 180 liters / min ﾡ￱ Hose length: approx.2m ﾡ￱ Capacity of the suction tank: 1L ﾡ￱ Capacity refill container: 0.75L ﾡ￱ Adapter for all standard brake fluid reservoirs: 21 - 30mm / 24 - 32mm / 28 - 37mm / 32 - 41mm Material: Plastic 0.6940 Package weight: 0.746 kg Product size (L x W x H): 19.00 x 22.00 x 12.00 cm / 7.48 x 8.66 x 4.72 inches Package size (L x W x H): 23.00 x 23.00 x 13.00 cm / 9.06 x 9.06 x 5.12 inches Package Contents: 1 x Brake Fluid Fill Machine, 1 x Refill Container, 1 x Hose, 1 x Set of Accessaries

Motorcycle Front Clutch Brake Fluid Reservoir Cover Cap For Yamaha MT07 XJ6F FZ Package weight: 0.07 kg Specification: Material: CNC Aluminum Color: Silver, Black, Blue, Red, Gold, Grey, Orange Size: 14.0 cm * 8.0 cm * 4.0 cm Placement on Vehicle: Front Fitment: For Yamaha MT07 XJ6F FZ6 FZ1 MT09 FZ8 Package Included: 1 X Brake Fluid Reservoir Cap 2 X Screws Click here for more deals Motorcycle Front Clutch Brake Fluid Reservoir Cover Cap For Yamaha MT07 XJ6F FZ Motorcycle Front Clutch Brake Fluid Reservoir Cover Cap For Yamaha MT07 XJ6F FZ

PRODUCT DETAILS Bel-Ray Silicone DOT 5 Brake Fluid exceeds FMVSS Sec. 571.116 DOT 5 silicone base motor vehicle brake fluid specifications. Mixes with all fluids meeting such specifications. DOT 5 brake fluid may not be mixed with DOT 3 and DOT 4. DOT 5 may be used to replace either DOT 3 or DOT 4 if a complete system flush is done. For use in all drum or disc hydraulic brake systems, except systems using mineral-based fluids (LHM). Boiling Point:  Dry 500F, Wet 365F.

PRODUCT DETAILS Bel-Ray Super DOT 4 Brake Fluid exceeds FMVSS  Sec. 571.116 DOT 4 motor vehicle brake fluid, SAE J1703 and ISO 4925 specifications. Mixes with all fluids meeting DOT 3 or DOT 4 specifications. For use in all drum or disc brake systems and hydraulic clutches, except systems using mineral-based fluids (LHM). Boiling Point: Dry 446F, Wet 311F.