Beamz dmx controller

A 192 channel DMX controller with 12 scanners. Each scanner controls up to 16 channels on each fixture. There are 30 programmable bank buttons holding 8 scenes each. These scenes can be programmed into 6 chase sequences each holding up to 240 scene which can be triggered by sound, manually by tap or automatically by the time faders between 0.1 seconds and 10 minutes. This controller is ideal for small theatres or stage applications. 12 fixtures each with 16 channels30 banks each with 8 programmable scenes (240 scenes in total)8 channel slider with page up and page down6 chase banksMusic, auto or manually triggered chase sequencesSpeed control from 0.1 second to 10 minutesMIDI connection facility (MIDI IN) to run the unit synchronous with your MIDI unit or compatible softwareBlackout buttonDMX polarity switch at the rear19" rack mountable or can be used as a stand-alone unit

154.023 - 8-way DMX Splitter / BoosterBRAND NEW FULL 12 MONTH WARRANTYFREE DELIVERY NATIONWIDET&C's Applyhttps://www.nxtleveltech.co.za/BEST PRICE ON NEW GEAR Stock ID: BeamZ DMX Splitter / Booster 8-way

  Specifications and Features: 192 DMX Channels 30 Banks each composed of 8 programmables Scenes 8 Fade adjusting output levels Auto mode is controlled by Tap Sync and Speed controlled MIDI control through MIDI interface 4 Digits LED Display 1st Digit shows Chases, 2nd Digit shows Scenes, 3rd and 4th Digits show Banks 2nd, 3rd & 4th digits show steps or 0-255 or Time Blackout master controlled by mannual or remote Chase programming and Chase running, manual control and remote control Fade Time Control DMX polarity selects Power Input: DC 9 - 12V Output: AC 120V - 230V 50 - 60Hz 300mA, DC 9V - 1A In Box: 1 x DMX Controller 1 x Power Supply 1 x Manual

  PICTURE MAY DIFFER FROM THE CONTROL BUTTONS  Main Features  : -192 DMX Channels. -30 Bank each composed of 8 programmable scencs. -8 Fade adjusting output level.  -Built-in Microphone. -Auto mode is controlled by TAP SYNC and Speed Controlled.  -Midi control through MIDI interface.  -4 Digits LED Display.  -Fird digit of LED shows CHASES, the secound digit of LED shows scenes.  -Third and fourth digit of LED shows BANBKS. -The second, Third, fourth digit of LED shows steps or 0-255 or TIME. -Blackout mater controlled by M annual or R emote. -CHASE programmable and CHASES running, Manual control and remote Control  -Fade Time Control  -DMX polarity selects  Technical Specification  : Power Input: DC + 9 - 12V Output: AC230V - 50Hz (AC120V-60Hz) 300Ma, DC9V - 1A Dimensions: 482 x 132 x 73 MM Weight: 2.5Kg In Box: 1 x 192 DMX Controller 1 x Power Supply  PICTURE MAY DIFFER FROM THE CONTROL BUTTONS 

DMX light control panel with 24 channels. Ideal to control spots for e.g. at live stage applications. With 48 memories for light sequences up to 99 steps each. Suitable for mounting in a 19 'rack. 24 DMX channels with individual flash buttons/faders 48 programs with up to 99 steps each Chase functions, full-on, blackout, tap sync, fade, hold LED display for program-step dimmer, speed-time and fade time Connection for external triggering (foot pedal) Programs can be completed independently or sound activated Music control via microphone or line input Midi Interface Suitable for 19 'Mounting (6U)

1 X DMX CONTROLLER 2X 18 LED PAR LIGHTS 2X 36 LED PAR LIGHTS PACKAGE DEAL: R3400 POSTAGE AND DELIVERY NOT INCLUDED IN PRICE. WE CAN DELIVER ANYWHERE IN SOUTH AFRICA

The Stage Designer™ 50 takes the size of a 24-channel dimming console and the functionality of a 48- channel console and combines the two into one powerful dimming unit. The Stage Designer™ 50 has up to 8 pages with 12 scenes each and programmable steps. The console allows the user to re-assign channels as needed and allows for MIDI input. Features: 48-channel DMX-512 dimming console 8 pages with 12 scenes each yields 96 total playback faders (simultaneous playback) programmable steps 2 programmable aux buttons Adjustable chase and fade times Re-assignable channels 3-pin and 5-pin DMX connections Built-in cross fader, dark and kill buttons MIDI in, out and thru (with file dump) Direct audio input Sequential linking or simultaneous playback of chases Override chases on the fly Beat-activation, tap sync, auto run, MIDI in/out 6-space (6U) rack mount Polarity selector Options: Blackout Controller (CH-X) Specifications: Power: DC V 500mA 115V or 230V Weight: 4.7kg Size: 483mm x 267mm x 89mm 2 year limited guarantee. For more info please click here

Scene-setter with 12 up to 24 DMX channels 48 programs spread over 4 pages Chase of the programs (automatic or manual) Manual control by 24 faders (speed control, dimming,...) Other functions: black-out, tap sync, step change, dimming curve Perfect for use on stages and in theaters Size: 48,3 x 8,5 x 26,4 cm (19"/6U) Weight: 4,8kg

512 Channel DMX interface 512 output channels when used with a computer 256 output channels when used standalone without computer (max 2000 steps / 100 scenes) Works with the Chromateq Led Player software. (included) Strong Aluminium housing Original Neutrik 3-pin XLR output connector USB cable included Comes with an external power supply + IR remote control for the use in standalone mode without computer For more information about the software: www.chromateq.com

The Lucid 1.4 is equipped with 4 high power COB LEDs that can be used for either wash effects or as a pixel animated bar. With the COB technology it's possible to create flawless RGB colour mixing. The Lucid 1.4 can either be used in stand-alone mode and run its preset programs in a certain speed or follow your music. But you can also use a DMX controller to program the effect into your shows. The Lucid 1.4 can be set on the floor by flipping the bracket upside down, making it ideal for your rental business. 4x 10W COB LEDs Individually controllable LEDs 4 or 16 DMX channels IR remote control DMX and Stand-alone mode Master/slave function Sound activated with adjustable sensitivity Auto mode with adjustable speed DMX in/output via 3-pin XLR IEC-connector input/output Control panel with LED display Bracket also acts as floor stand Power Rating: 40W Beam Angle: 42° Field Angle: 75° No Of Colours: 3 RGB Colours: Red, Green, Blue No Of LEDs: 4x 9W DMX Channels: 4 or 16 Mode: DMX and Stand-alone Power Supply: AC100-240V 50/60Hz Dimensions: 145 x 460 x 113mm Weight: 3.7kg

The Lucid 1.2 is equipped with 2 high power COB LEDs that can be used for either wash effects or as a pixel animated bar. With the COB technology it's possible to create flawless RGB colour mixing. The Lucid 1.2 can either be used in stand-alone mode and run its preset programs in a certain speed or follow your music. But you can also use a DMX controller to program the effect into your shows. The Lucid 1.2 can be set on the floor by flipping the bracket upside down, making it ideal for your rental business. 2x 10W COB LEDs Individually controllable LEDs 4 or 10 DMX channels IR remote control DMX and Stand-alone mode Master/slave function Sound activated with adjustable sensitivity Auto mode with adjustable speed DMX in/output via 3-pin XLR IEC-connector input/output Control panel with LED display Bracket also acts as floor stand Power: 24W Beam Angle: 42° Field Angle: 75° No Of LEDs: 2x 10W DMX Channels: 4 or 10 Mode: DMX and Stand-alone Power Supply: AC100-240V 50/60Hz Dimensions: 150 x 240 x 108mm Weight: 2.2kg

A kit of 2 LedPARs and 2 Jellymoons on a T-bar with the possibility to mix RGB with Cool White to achieve extraordinarily beautiful solid colours. Because of the 4-in-1 technology and very high power of the individual LEDs we can achieve a very high output with a minimum quantity of LEDs. The lenses on the front mix all colours perfectly without creating shades in the output. The Jellymoons create an amazing double light effect. This together makes for a great combination. The T-bar has been carried out in a compact casing that can fit almost anywhere. The system includes a remote control that simplifies operation and eliminates the bother of programming. Or you can choose to control with an external DMX controller via its XLR In/Outs. The rugged housing is specially designed for bars, disco, night clubs etc 2 PAR cans with 3x 3W 4-in-1 LEDs 2 Jellymoon with 4x 3W RGBW LEDs RGBW Colour mixing 8 DMX channels DMX and Stand-alone mode Master/slave synchronization IR remote control DMX in/output via 3-pin XLR Pre programmed shows Sound activated with adjustable sensitivity Auto mode with adjustable speed Control panel with LED display Included light stand with max height of 2m Colours PAR RGBW, Jellymoon RGBW No Of LEDs: PAR 3, Jellymoon 4 DMX Channels: 3, 6 or 15 channels DMX Connection: 3-pin XLR Power Supply: 100~240Vac / 50Hz Consumption: 60W Max Height: 1.7m (stand) Dimensions: 730 x 200 x 200mm Weight: 5.65kg

The MHL810 doublesweeper creates exciting lighting effects with its quick sweeping beams and 8-Zone chasing, pulsing and strobe effects. This unique fixture features two independently tilting bars (each with 4 lenses) that project tight, 4 degree beams of light from 10 Watt 4-in-1 LEDs. The doublesweeper offers 1, 6, 12 or 36 DMX channel modes and a 4-Button LED DMX menu. In the 36-channel mode you can control the colour of each lens individually. It may be controlled trough its own built-in programs or a DMX controller. Best when used in multiples, the doublesweeper is designed for stages, nightclubs and mobile entertainers. 8x 10W CREE 4-in-1 LEDs 1, 6, 12 or 36 DMX channels Individual LED control DMX and Stand-alone mode Master/slave synchronization Pre programmed shows Sound activated with adjustable sensitivity Auto mode with adjustable speed DMX in/output via 3-pin XLR IEC-connector input/output Control panel with LED display

The MHL810 doublesweeper creates exciting lighting effects with its quick sweeping beams and 8-Zone chasing, pulsing and strobe effects. This unique fixture features two independently tilting bars (each with 4 lenses) that project tight, 4 degree beams of light from 10 Watt 4-in-1 LEDs. The doublesweeper offers 1, 6, 12 or 36 DMX channel modes and a 4-Button LED DMX menu. In the 36-channel mode you can control the colour of each lens individually. It may be controlled trough its own built-in programs or a DMX controller. Best when used in multiples, the doublesweeper is designed for stages, nightclubs and mobile entertainers.

Beamz - Led Parbar 4-Way Kit 7X 10W Quad Leds DMX No Stand This multi-use foldable lightweight and accessible 4-way DMX PARBAR with 7x 10W Quad LEDs makes setup quick and easy, and is perfect for a portable lighting solution. Comes with 4-pedal foot controller and T-bar LED controller. This compact product is a need to have in todays technology.