Battery charger 30a 12v

Buy Battery Charger - 12V 20A Pulse Battery Charger for R299.00

Buy Battery Charger - 12V 2A Pulse Battery Charger for R79.00

Buy Battery Charger - 12V 20A Pulse Battery Charger for R300.00

Buy Battery Charger - 12V 15A Pulse Battery Charger for R245.00

CTEK Battery Charger - 12V Multi XS 25000   The CTEK 12V Multi XS 25000 Battery Charger  is a professional 12V charger. It offers efficient and fast charging and is ideal charging and maintenance charging of 12V vehicles and machinery. XS 25000 has no mode button, so it's just plug in main and connect battery cables to start charging. The XS 25000 is equipped with all necessary features and functions to solve a broad range of battery related problems. It offers features such as battery diagnosis that shows if a battery can receive and retain a charge, unique maintenance charging, and a temperature sensor for optimized charging regardless of the weather conditions. It also has a power supply mode which allows the battery to be disconnected from the vehicle without losing important configurations. The XS 25000 is a fully automatic 7-step charger that delivers 25A to 12 V batteries from 40—500 Ah. The charger is IP44 classified (outdoor use), designed to protect vehicle electronics, non-sparking, reverse polarity protected, and short-circuit proof.   Features   Fan 8 step charging Auto: Fully automatic for optimal charging 12V: For all lead-acid batteries Fully Charged Battery / Maintenance Charging   Specifications   Cooling Fan Volt 12V Rated Voltage AC 170—260VAC, 50—60Hz Charging Voltage 14.4V Charging Current 25A max Current, Mains 2.9A rms (at full charging current) Back Current Drain Ripple Ambient Temperature -20°C to +50°C, output power is reduced automatically at high temperatures Charger Type 8 step, fully automatic charging cycle Battery Types All types of 12V lead-acid batteries (WET, MF, Ca/Ca, AGM and GEL) Battery Capacity 50—500Ah Dimensions 235 x 130 x 65mm  Insulation Class IP44 Weight 1.9kg  

BatteryMate 150-9 Battery Charger - 12v The BatteryMate 150-9 Battery Charger is a load tester & charger and automatic desulfater for all 12V lead-acid batteries from 2 to 45Ah. Features Quick new battery activation ¿ 30 minute activation charge for new batteries that have received acid just prior to charging, such as STD flooded batteries with removable filler caps and AGM-MF ¿dry-charged¿ batteries that are delivered with a separate custom acid pack. True load tester selectable from 15A to 150A ¿ Automatically tests battery cranking amps up to 330CCA. 3 second test simulates normal engine cranking / start, 15 second test checks battery health. Powersport specific charging algorithm ¿ 4 step charging method recovers any 12V battery. MF mode allows up to 16.9V for ¿dry-charged¿ AGM batteries. Temperature regulated charging ¿ Charge voltage is adjusted according to ambient temperature. (-4mV/°C/cell above/below 68°F/20°C). Accurate voltage sensing ¿ Charge leads have integrated voltage sense wires for exact voltage measurement at the battery. Easy to use ¿ 6 position combination selector allows selection of correct test and charge current for connected battery. TEST and then select max. charge time according to result, press CHARGE button. Program completes charging automatically and then tests the battery. Specifications Charging AMPS 9A maximum; 1, 2, 3, 5, 7, 9 Amp selection Testing AMPS 150A maximum; 15, 35, 50, 70, 100, 150 Amp selection Use Indoor / workshop environment (lowest temperature: -4°F / -20°C) Save Low Volt Start of 1V + high power desulphation recovery Ideal For STD, AGM & GEL 12V batteries from 2 ¿ 40Ah Input Selectable 110-120VAC / 220-240VAC 50-60Hz, with ON/OFF power switch and replaceable fuse protection Style Vented industrial table top case with wall mount option (TS-218), 6ft / 180cm AC supply lead and 1 pair high current 6ft / 180cm charge leads ending in heavy duty battery clamps. BatteryMate 150-9 Battery Charger User Manual

CTEK Battery Charger - 12V MXS 10   The CTEK 12V MXS 10 Battery Charger  is a fully automatic 8-step charger that delivers 10A to 12V batteries from 20—200Ah and is suitable for maintenance charging up to 300Ah. The charger is IP 65 classified (splash and dust proof), designed to protect vehicle electronics and non-sparking, reverse polarity protected and short-circuit proof. It is delivered with a 2-year warranty.   Specifications   Volt 12V Rated Voltage AC 220—240VAC, 50—60Hz Charging Voltage NORMAL: 14.4V, COLD/AGM: 14.7V, RECOND: 15.8V, SUPPLY: 13.6V Min Battery Voltage 2.0V Charging Current 10A max Current, Mains 1.0A rms (at full charging current) Back Current Drain Ripple Ambient Temperature -20°C to +50°C, output power is reduced automatically at high temperatures Charger Type 8 step, fully automatic charging cycle Battery Types All types of 12V lead-acid batteries (WET, MF, Ca/Ca, AGM and GEL) Battery Capacity 20—200Ah, up to 300Ah for maintenance Dimensions 197 x 93 x 49mm Insulation Class IP65 Weight 0.8kg  

CTEK Battery Charger - 12V SmartPass   The CTEK 12V SmartPass Battery Charger  is an energy management unit which controls and optimises energy produced by alternators, solar cells, wind power or conventional AC/DC chargers, and distributes it to the battery banks or consumers which require energy, such as the deep cycle bank, bow thruster batteries, consumers, etc. Used together with a D250S, SmartPass provides optimal charging via CTEK¿s unique staged charging cycle, which also protects your batteries. SmartPass is a fully automatic energy management system which can handle up to 80A for batteries of between 28-800Ah. The energy management system is IP65 classified (water jet and dust protected and approved for outdoor use). Suitable for all types of 12V lead-acid batteries.   Specifications   Volt 12V Charging Current 80A Back Current Drain Ripple Ambient Temperature -20°C to +50°C, output power is reduced automatically at high temperatures Charger Type 4 step, fully automatic DC/DC charger Battery Types All types of 12V lead-acid batteries (WET, MF, Ca/Ca, AGM and GEL) Battery Capacity 28¿800Ah Dimensions 192 x 110 x 65mm Insulation Class IP65 Weight 0.74kg  

OptiMate 7 Select Battery Charger - 12V 10 Amp & 24V 5 Amp The OptiMate 7 Select Battery Charger - 12V 10 Amp & 24V 5 Amp is perfect for high performance 12V and 24V starter and deep cycle batteries that demand accurate temperature controlled charging and unsupervised safe long term maintenance. SPECIAL FEATURES: Designed for sensitive electronics: The SAVE program has been designed for SAFE fully automatic low volt start (from 0.5 Volts) and PULSE recovery of deep discharged batteries connected to very sensitive electronics e.g. light aircraft, industrial equipment. Protection against incorrect voltage selection: With 24V selected and a 12V battery is connected OptiMate 7 12V-24V will immediately warn that a low voltage is sensed and then not proceed to charging. USER must confirm the nominal voltage of the connected battery is 24V before SAVE mode activates. Features CHARGING AMPS: 10A @ 12V / 5A @ 24V (Ampmatic) USE: Indoor / Outdoor (lowest temperature: -40°F / -40°C). SAVE: Low Volt Start of 0.5V (12V) + 1-step desulphation recovery. IDEAL FOR: STD, AGM & GEL 12V (batteries from 3 ¿ 400Ah) | 24V (batteries from 1- 200Ah). INPUT: Global (100-240V 50-60Hz), high efficiency (CEC listed), fully sealed. STYLE: Weatherproof case with wall mounts, with 6ft / 180cm AC supply lead and 6ft / 180cm charge lead ending in SAE connector. Weatherproof battery lead & standard battery clip set included.

OptiMate  2  Battery Charger - 12V   The OptiMate 2 Battery Charger  is weatherproof, very easy to use, simply connect to the battery and plug it into the nearest power socket, the rest is fully automatic. With 0.8A constant current OptiMate 2 automatically brings the battery to full charge and then switches to the unique OptiMate battery saving maintenance charge mode to keep the battery at 100% ready and at the same time provides power to the on board computer, display or anti theft alarm. OptiMate 2 has been proven to extend battery life to 400%; batteries can last 8 years if maintained with OptiMate 2. To make this work always hook up OptiMate 2 to the battery when the vehicle is parked and OptiMate 2 will safely maintain the battery at 100%, never overcharging, thanks to its unique 30 min charge, 30 min rest cycle during every hour of long term maintenance charge.     Features   Extends life and improves performance of a 12V battery, mounted in a vehicle / craft or battery operated system that is not in daily use, even in temperatures below freezing. Senses the battery condition, recharges and then keeps the battery 100% ready and provides power to the anti-theft alarm, display, on board computer, etc.  The maintenance program delivers only what the battery needs, never overcharges, never undercharges.   Specifications   Charging AMPS 0.8A (constant current) Use Indoor / Outdoor  (lowest temperature: -4°F / -20°C) Save Low Volt Start of 2V Ideal For STD, AGM & GEL 12V batteries from 3 ¿ 96Ah Input Global (100-240V 50-60Hz), high efficiency (CEC listed), fully sealed Style   Weatherproof case with wall mounts, with 6ft / 180cm AC supply lead and 6ft / 180cm charge lead ending in SAE connector. Weatherproof battery lead & standard battery clip set included.  

OptiMate  2  Battery Charger - 12V   The OptiMate 2 Battery Charger  is weatherproof, very easy to use, simply connect to the battery and plug it into the nearest power socket, the rest is fully automatic. With 0.8A constant current OptiMate 2 automatically brings the battery to full charge and then switches to the unique OptiMate battery saving maintenance charge mode to keep the battery at 100% ready and at the same time provides power to the on board computer, display or anti theft alarm. OptiMate 2 has been proven to extend battery life to 400%; batteries can last 8 years if maintained with OptiMate 2. To make this work always hook up OptiMate 2 to the battery when the vehicle is parked and OptiMate 2 will safely maintain the battery at 100%, never overcharging, thanks to its unique 30 min charge, 30 min rest cycle during every hour of long term maintenance charge.     Features   Extends life and improves performance of a 12V battery, mounted in a vehicle / craft or battery operated system that is not in daily use, even in temperatures below freezing. Senses the battery condition, recharges and then keeps the battery 100% ready and provides power to the anti-theft alarm, display, on board computer, etc.  The maintenance program delivers only what the battery needs, never overcharges, never undercharges.   Specifications   Charging AMPS 0.8A (constant current) Use Indoor / Outdoor  (lowest temperature: -4°F / -20°C) Save Low Volt Start of 2V Ideal For STD, AGM & GEL 12V batteries from 3 — 96Ah Input Global (100-240V 50-60Hz), high efficiency (CEC listed), fully sealed Style   Weatherproof case with wall mounts, with 6ft / 180cm AC supply lead and 6ft / 180cm charge lead ending in SAE connector. Weatherproof battery lead & standard battery clip set included.  

OptiMate Pro-4  Battery Charger - 12V   The OptiMate Pro-4 Battery Charger  handles up to 4 batteries at a time. The exclusive ampmatic microprocessor with version 2 programming, tests the battery before, during and after charging and charge current is automatically varied according to battery size and health. Ideal for large PTW workshops.   Features   New mode ¿ 1 hour activation charge only for new* batteries that have received acid just prior to charging, such as STD flooded batteries with removable filler caps and AGM-MF ¿dry-charged¿ batteries that are delivered with a separate custom acid pack. 2A / 4A mode ¿ 12 hour max. charge mode for diagnoses, recovery, charging, testing of low volt sulphated batteries. Suitable for recharge of all batteries including factory activated sealed AGM batteries (e.g. Yuasa YTZ, GYZ) prior to sale.   Specifications   Bank/Charging Stations 4 (each bank operates independently) Charging AMPS (per bank) 4A maximum, Ampmatic control. (2A max. when 2A is selected) Use Indoor / workshop environment (lowest temperature: -4°F / -20°C) Save Low Volt Start of 1.8V + 2 step desulphation recovery Ideal For STD, AGM & GEL 12V batteries from 2 ¿ 40Ah Input Selectable 110-120VAC / 220-240VAC 50-60Hz, with ON/OFF power switch and replaceable fuse protection Style   Vented industrial table top case with wall mount option (TS-218), 6ft / 180cm AC supply lead and 4 x 6ft / 180cm charge lead ending in SAE connector. 4 x standard battery clip sets included.  

Buy LCD Car Smart Battery Charger 6V 12V 24V 2A-6A Automatic Pulse Repair Motorcycle for R515.45

2/10/25 Amp Fast Charger: quickly charging all types of 12V lead acid batteries, including GEL, AGM and STD. It's the best smart charger for automotive, motorcycle, marine, RV, Powersport, lawn&garden, children toys, etc. Start Aid Button: Energy saving design for activating battery whose capacity is not enough to start engine within one 120 second cycle Smart Detect System: Automatically detect the battery voltage and capacity, and select the charge rate best fit for your type of battery. Automatic charge cycle functionality switches to float mode after fully charging the battery. Battery reconditioning feature helps extend battery life Complete 6-step Charging Program: Desulphation, Soft Start, Bulk Charge, Absorption, Absorption and Floating, allow for optimization of battery power, without overcharging or damaging Advanced & Safety Protection: LED helps keep driver informed of chargers operation. Certified by UL. No worry about battery over voltage, over heat, overtime charging and reverse polarity. 18-Month Hassle-Free Warranty, 24-hour friendly customer service and 100% customer satisfaction See more product details

30A 12V/24V Solar Panel Battery Regulator Charging Controller 3-Stage PWM LCD Package weight: 0.22 kg Specification: Name:10A 12V/24V LCD Display PWM Solar Panel Charge Controller Rated voltage:12/24V AUTO Charge current:30A Discharge current:10A Max.PV input power:130W(12V),260W(24V) Max solar input: 12V battery,the highest 23V 24V battery when the highest 46V Equalization Ternary lithium battery(L1):12.0V Lithium iron phosphate battery(L2):13.8V Lead acid battery:13.7V Undervoltage protection Ternary lithium battery:10V(Adjustable range: 9.0-11.0V) Lithium iron phosphate battery:12V(Adjustable range:10.3-12.8V) Lead acid battery:10.7V (Adjustable range:9.5-11.5V) Disstarge reconnect: Ternary lithium battery:11.6V(Adjustable range:11.0-11.7V) Lithium iron phosphate battery:13.5V(Adjustable range:12.8-13.8V) Lead acid battery:12.6V (Adjustable range:11.5-13.0V) USB output:2 way USB output,5V/2A(Max.) Self-consume: Operationg temperature:-35-60￢ﾄﾃ Color:Black Size:133mmx70mmx33mm Features: Build-in industrial micro controller. Big LCD display,all adjustable parameter. Fully 3-stage PWM charge management. Build-in short-circuit protection,open-circuit protection,reverse protection,over-load protection. Dual mosfet reverse current protection,low heat production. There are lithium battery and lead-acid battery switching function (at the battery type interface,3second into the switch settings),the default is lithium battery. System Connection: 1.Connect he battery to the charge regulator-plus and minus. 2.Connect the photovoltaic module to the regulator-plus and minus. 3.Connect the consumer to the charge regulator-plus and minus. Package Included: 1 X 10A PWM Solar Charge Controller 1 X Screwdriver 1 X Manual Click here for more deals 30A 12V/24V Solar Panel Battery Regulator Charging Controller 3-Stage PWM LCD 30A 12V/24V Solar Panel Battery Regulator Charging Controller 3-Stage PWM LCD