Battery boost

Buy Battery Shield D1 Mini Single Charging Boost Module V1.1.0 for R51.95

5 (h) x 6 (dia)  ABS • supports playback from smartphones, tablets or most other Bluetooth compatible audio devices  • internal, rechargeable lithium ion battery  • recharges via USB cable (included)

5 (h) x 6 (dia)ABS• supports playback from smartphones, tablets or most other Bluetooth compatible audio devices• internal, rechargeable lithium ion battery• recharges via USB cable (included) PLEASE NOTE: No branding on product as per the image. (Illustration to indicate branding possibilities only.)

Buy 5pcs Geekcreit D1 Mini Single Lithium Battery Charging And Battery Boost Shield for R317.86

Buy 5pcs Geekcreit D1 Mini Single Lithium Battery Charging And Battery Boost Shield Board for R307.48

2Pcs 3V To 5V 1A USB Charger DC-DC Converter Step Up Boost Module Features: Module uses the Taiwan production boost chip, high efficiency (up to 92%), plus built-in over-current protection chip, can be more good to protect the module and use the device after the class. Module with undervoltage protection, undervoltage protection into state below 2.5V, can be more better protect the battery, to avoid excessive discharge. Module can modify the fixed resistor adjusts the output voltage can be adjusted up to 12V output, but to ensure that the output power of less than 5W. This module uses TDK multilayer ceramic capacitors as main filter capacitor, the output ripple can be as low as 20mV (5V1A output case)! This module uses a standard USB interface, you can use all universal USB charging mobile phones, MP3, MP4 and other equipment, the perfect support for IPHONE and other mobile phone. Specification: Module properties: Non-isolated step-up module (BOOST) Input voltage: 2.5-6V Output voltage: 4-12 V(Adjustable, the default 5 v) Output current: 1000mA (Max) Efficiency: 92%(Max) (the higher the input voltage, the higher the efficiency) Switching frequency: 1MHz Output ripple: 20mV (MAX) Operating temperature: Industrial (-40°c to +85°c) Voltage regulation: ±2.5% Short circuit protection: None (please use the lithium battery with protection) Input: IN + postive, IN - negative Output: USB output Size: 3 x 1.3 x 0.8 cm Application: This module can be used for DIY mobile power output, enabling single or two ordinary lithium battery to 5V boost to the mobile phone or PSP device charging. DIY a mobile power supply, only need one battery, you can output 5V voltage for your phone, MP3, MP4, PSP charger, very easy. In order to power your electronic devices when your device needs 5V power supply, when you only have lithium battery, this module can be directly step-up to 5V, solve your problems. Note: This module is a fixed 5V output module Modules indicated above IN - (negative input), IN + (positive input), OUT-(negative output), OUT + (positive output) must be connected correctly, otherwise it may cause damage to the module This module has an LED light, when the charge when the LED lights can be used as indicator Package included: 2 x USB boost module

3Pcs 3V To 5V 1A USB Charger DC-DC Converter Step Up Boost Module Features: Module uses the Taiwan production boost chip, high efficiency (up to 92%), plus built-in over-current protection chip, can be more good to protect the module and use the device after the class. Module with undervoltage protection, undervoltage protection into state below 2.5V, can be more better protect the battery, to avoid excessive discharge. Module can modify the fixed resistor adjusts the output voltage can be adjusted up to 12V output, but to ensure that the output power of less than 5W. This module uses TDK multilayer ceramic capacitors as main filter capacitor, the output ripple can be as low as 20mV (5V1A output case)! This module uses a standard USB interface, you can use all universal USB charging mobile phones, MP3, MP4 and other equipment, the perfect support for IPHONE and other mobile phone. Specification: Module properties: Non-isolated step-up module (BOOST) Input voltage: 2.5-6V Output voltage: 4-12 V(Adjustable, the default 5 v) Output current: 1000mA (Max) Efficiency: 92%(Max) (the higher the input voltage, the higher the efficiency) Switching frequency: 1MHz Output ripple: 20mV (MAX) Operating temperature: Industrial (-40°c to +85°c) Voltage regulation: ±2.5% Short circuit protection: None (please use the lithium battery with protection) Input: IN + postive, IN - negative Output: USB output Size: 3 x 1.3 x 0.8 cm Application: This module can be used for DIY mobile power output, enabling single or two ordinary lithium battery to 5V boost to the mobile phone or PSP device charging. DIY a mobile power supply, only need one battery, you can output 5V voltage for your phone, MP3, MP4, PSP charger, very easy. In order to power your electronic devices when your device needs 5V power supply, when you only have lithium battery, this module can be directly step-up to 5V, solve your problems. Note: This module is a fixed 5V output module Modules indicated above IN - (negative input), IN + (positive input), OUT-(negative output), OUT + (positive output) must be connected correctly, otherwise it may cause damage to the module This module has an LED light, when the charge when the LED lights can be used as indicator Package included: 3 x USB boost module

Features: 1. This module uses an imported chip, and the output current is raised to 1A, which reduces the starting current and improves the reliability of the whole. 2. The product uses the patch inductor, the volume is super small, specially designed for the customer which the volume has the request 3. With the function of undervoltage indicator light, when the voltage is full, the light is light. When the voltage is lower than 2.7V, the lamp is extinguished. At this time, the battery should be charged to avoid damage to the battery. Module parameters: 1. Module name: lithium battery 5V boost module / 1.25-5V to 5V 1A boost power module with undervoltage indicator 2. Module size: 25 x 18.5 x 5.5mm (L x W x H, including the highest electronic component) 3. Module properties: non isolated DC-DC 4. Input voltage: DC 1.25-5V, N+ input positive, IN- input negative 5. Output voltage: DC 5.0V-5.2V 6. Rated output current: 1A (when input is 2.8V-3V, output is 0.8A; when a single lithium battery input, output can up to 1A) 7. Output power: when output current is 1A, the average efficiency up to 96% with undervoltage indicator function 8. Conversion efficiency: the average of 90% (the higher the input voltage is, the higher the efficiency is) 9. Output ripple: 50mV (MAX) 10. Working temperature: industrial grade (-40￢ﾄﾃ to +85 ￢ﾄﾃ) 11. Full load temperature rise: 20 ￢ﾄﾃ 12. Static current: 130uA 13. Load adjustment rate: ±1% 14. Voltage adjustment rate: ± 0.5% Package included: 1 x Boost power module

Features: 1. This module uses an imported chip, and the output current is raised to 1A, which reduces the starting current and improves the reliability of the whole. 2. The product uses the patch inductor, the volume is super small, specially designed for the customer which the volume has the request 3. With the function of undervoltage indicator light, when the voltage is full, the light is light. When the voltage is lower than 2.7V, the lamp is extinguished. At this time, the battery should be charged to avoid damage to the battery. Module parameters: 1. Module name: lithium battery 5V boost module / 1.25-5V to 5V 1A boost power module with undervoltage indicator 2. Module size: 25 x 18.5 x 5.5mm (L x W x H, including the highest electronic component) 3. Module properties: non isolated DC-DC 4. Input voltage: DC 1.25-5V, N+ input positive, IN- input negative 5. Output voltage: DC 5.0V-5.2V 6. Rated output current: 1A (when input is 2.8V-3V, output is 0.8A; when a single lithium battery input, output can up to 1A) 7. Output power: when output current is 1A, the average efficiency up to 96% with undervoltage indicator function 8. Conversion efficiency: the average of 90% (the higher the input voltage is, the higher the efficiency is) 9. Output ripple: 50mV (MAX) 10. Working temperature: industrial grade (-40??to +85 ??/span>) 11. Full load temperature rise: 20 ??/span> 12. Static current: 130uA 13. Load adjustment rate: ±1% 14. Voltage adjustment rate: ± 0.5% Package included: 10 x Boost power module

Summarize:   LC boost module MC34063A_BOOST are based on a small chip MC34063A booster module, low voltage can be up to a certain range of high voltage, which can adjust output voltage through the potentiometer.Can be used in the places where need to improve the voltage.   Feature:   (1) Low input voltage, high output voltage.Realize the booster function. (2) The output voltage is adjustable. (3)The module size is small.   Technical parameters: The input voltage range: 3.6 V - 30 V. Range of output voltage, output voltage of 3.8 V to 36 V output voltage regulator features: load regulation is less than 5%. Output current.This module IC internal switch tube is 1.5 A, but for reasons of safety and calorific value, recommend this module within the load on the power consumption is 0.8 W.When the output is 5 v, load within 160 ma.Note: the higher the output of the negative pressure, load ability is relative decline.  VIN: low input voltage. GND: public land. OUT: output increase of voltage. Instructions: the working voltage VCC &gnd, not reverse connection, in order to avoid damage to the board and components. By adjusting the potentiometer to control the output voltage. Need to input and output feet by one greater than 100UF electrolytic capacitors to the ground.The input and output filter capacitor is the positive input feet, negative ground. Pressure must be greater than the input and output voltage of capacitor. Package included: 1 x MC34063A Boost Module Battery Booster Module

Feature: Input voltage: + 3.5V – + 8V Output voltage: + 9V Output current: 150mA (when the output voltage is + 9V) Ripple voltage: 100mVpk (output current at 150mA) For require 3.7V lithium battery or USB power This boost converter is an ideal match DSO138 oscilloscope kit, it can be connected directly to the DSO138 motherboard, make DSO138 oscilloscope to be a portable oscilloscope. (The DSO138 oscilloscope and battery is not included.) Package included: 10 x DC/DC Converter Boost Moudle

Buy 10pcs DC-DC 5V/2A Charge Discharge Boost Battery Protection Board DD06CVSA 3.7V 4.2V Module for R1,377.64

Buy 18650 Battery Charge Controller With Boost Converter for R29.00

Buy Micro USB 5V Lithium Battery Charger Boost Protection Board Li-Po Li-ion 18650 Power Bank Charger Bo for R85.52

Buy Step Up Boost Converter Lithium 18650 Battery 12V 3A 8W **LOCAL STOCK** for R35.00

Hotrod your valve amp The LT BOOST’s patent-applied-for gain circuit is designed to push your guitar amp into smooth overdrive and has been refined to ensure the maximum delivery of your dynamics and tone. This is an extremely flexible pedal and can be used into a clean amp as a volume boost, an additional equalisation stage, or to drive your amplifier into dynamic overdrive.LT BOOST Guitar Pedal Overview Patent-Applied-For clipping circuit that matches the tone and response of our valve pedals Continuously variable boost Bass and Treble controls for tonal refinement 9V battery powered Small form-factor - great for pedalboards Rugged construction

LT Boost Guitar Pedal LT Boost Guitar Pedal Features For clipping circuit that matches the tone and response of our valve pedals Continuously variable boost Bass and Treble controls for tone refinement 9V battery powered Small form-factor - great for pedal boards Rugged construction

3pcs 3.7V To 5V 1A 2A Boost Module DIY Power Bank Mainboard Built In 18650 Lithium Battery

Feature: Input voltage: DC 10V-32V. Output voltage: DC12V-35V(adjustable). Output current: 10A (MAX). Input current: 16A (MAX) (more than 10A please strengthen heatsink). Output power: natural cooling 100W (MAX), strengthening cooling 150W (MAX) real power. Conversion efficiency: 94% (when Output 19V 2.5A Input 16V, Reference). Output ripple: 2% (MAX). Working temperature: industrial (- 40 ° c to +85 °c) (environmental temperature, more than 40 degrees, please reduce power to use, or - enhance cooling). Full-Load temperature: 45 degrees. No-load current: 25mA typical. Voltage regulation: ± 0.5%. Load regulation: ± 0.5%. Dynamic response speed: 200uS 5%. Short circuit protection: No (Please installs the fuse or protection circuit at input parts). Input Reverse protection: No (please comply with a reverse protection or connect a diode at input parts.). Dimension: 65mm x 35mm x 23.5mm. Applications: DIY an adjustable on-board power supply, you just input DC 12V, then you can get output DC 12V-35V (adjustable), But the output voltage can not below the input voltage. DIY a booster charger. Provide power for your electronic equipment. Use Solar battery charging for electric accumulator. Package included: 1 x Power Boost Module 150W Provide power for your electronic equipment. Use Solar battery charging for electric accumulator.

Buy 3pcs Wemos Battery Shield V1.2.0 For Wemos D1 Mini Single Lithium Battery Charging & Boost Module for R252.00

DC-DC 1V-5V To 5V 500mA Boost Converter Step Up Module Power Module Feature:   Input voltage of DC 1V~5V, output 5V DC voltage is stable, the input to the output current of 500~600MA with two AA batteries, a single AA battery power supply output current 200 ma about for mobile phones camera, single-chip, digital products. High conversion efficiency up to 96% Ultra-small size, installed in a variety of small equipment With working lights   Specification:   Input voltage: DC 1V~5V Output voltage: DC 5V Output Current: 500mA PCB size: 17.55mm*25.22mm*5.85 mm En bloc Size: 17.55*32.53*8.3mm Weight: 14g Note: No USB port.   Package included:   1 x Boost Converter Power Module

3Pcs DC-DC 1V-5V To 5V 500mA Boost Converter Step Up Power Module Feature: Input voltage of DC 1V~5V, output 5V DC voltage is stable, the input to the output current of 500~600MA with two AA batteries, a single AA battery power supply output current 200 ma about for mobile phones camera, single-chip, digital products. High conversion efficiency up to 96% Ultra-small size, installed in a variety of small equipment With working lights Specification: Input voltage: DC 1V~5V Output voltage: DC 5V Output Current: 500mA PCB size: 17.55mm*25.22mm*5.85 mm En bloc Size: 17.55*32.53*8.3mm Weight: 14g Note: No USB port. Package included: 3 x Boost Converter Power Module

Feature: Shell size: 55 x 35 x 15mm PCB board size: 5 x 2 x 1mm Operating voltage: 1.5V (AAA battery) Kit weight: 17 grams Note: This is a DIY kit, you need to assemble it. Package includes: 1 x Plastic housing 1 x PCB board 1 x 8*8 self-locking switch 1 x 7mm self-locking switch cap 1 x Single wire 5CM 1 x 8550 transistor 1 x 8050 triode 1 x 5MM Straw Hat LED 1 x 330UH inductor 1 x 102 ceramic capacitor 1 x 510 ohm resistor 1 x 20K resistance 1 x Battery positive piece 1 x Battery negative piece

Buy 2Pcs 5V Lithium Battery Charger Step Up Protection Board Boost Power Module Micro for R210.00

Buy 10pcs 5V Lithium Battery Charger Step Up Protection Board Boost Power Module Micro USB Li-Po Li-ion for R502.00

TECH-4290 BOOST SPEAKERS for sale Brand new never used 3x available R40 ea. Normally costs much more. Please see our other ads. Maybe there is something that catches your attention. Priced to sell quickly. Thx. • Supports playback from smartphones, tablets or most other audio devices with a 3.5mm socket • Non-integrated 3.5mm audio input cable included internal, rechargeable lithium ion battery • Recharges via USB cable (included) This speaker says never judge it by it’s size, as the Havoc Speaker packs two watts of quality audio into it’s aluminum shell about the diameter of a quarter. The built-in rechargeable Lithium Ion Battery gives you 4 hours of playback time and recharges in 1.5 hours. Includes a Micro USB to USB recharg- ing cable, 3.5mm Audio cable and hanging strap Material: ABS Item Size: 34mm(h) x 37mm(dia) Max Colours: A: Four Colours Max Size A: 20mm(w) x 25mm(h)

  Terms Of Sale Read the Sale Description Happy Buying! Please ask me questions - I'll gladly give you a hand! Shipping Anywhere in SA Sent as a Registered Letter - R45 (This shipping has no insurance option - sent at buyers choice/risk) Standard - R75 Speed Services - R115 Postnet to Postnet - R125 Couriered to Your Door R145 (To most towns excluding outlying areas) *Please Add 3% for Insurance* By placing an order and choosing not to use Insurance you agree to indemnify the seller from any liability as a result of loss or damage to the goods during shipping.     Brand New Generic NP-W126 Li-Ion Camera Battery To fit most Fujifilm X-Bodies   *BRAND NEW AND UNUSED*   I purchased some extra batteries when overseas, I don't need as many as I expected and the ones I have used work perfectly. The batteries on offer are new and unused, they are not original Fujifilm batteries it's a generic but I've used them with my Xpro-1 and Xt-10 and they work great. Specs: 7.2V 1260mAH 9.1Wh Compatible with most X-Series bodies and a few other Fujifilm cameras: X-Pro1, X-E1, X-E2, X-M1, X-A1, X-T1, X-T2 FinePix HS50EXR, HS30EXR, HS33EXR etc The NP-W126 type batteries are also compatible with the newer XT-2/XPro-2 etc but the boost features and 4k video etc only works with the newer NP-W126s type battery. From my research the NP-W126 battery is compatible with the following cameras: Fuji HS30 EXR, hs30exr Fuji HS33 EXR, hs33exr Fuji HS50 EXR, hs50exr Fuji X-A1, xa1 Fuji X-E1, xe1 Fuji X-E2, xe2 Fuji X-M1, xm1 Fuji X-T1, xt1 X-T2, xt2 Fuji X-T10, xt10 Fuji X-Pro1, xpro1 Fuji X-Pro2, xpro 2 Please do confirm compatibility if you are unsure!!   The pics below are of the Actual Item !!What you see Below is what You Get!!   Please confirm Compatibility Before ordering!   *I cannot do Returns or Refunds on Correctly Supplied Items*  Or ask me a question, I'll gladly be of assistance!!  

12 /24V BATTERY CHARGER (30Ah -220Ah)   Specifications: 1.Single phase,portable 12 & 24V battery charger   2.Exquisite design and stable charging current   3.Equipped with ammeter and over-load protection   4.Slow charge and boost charge mode selected   5.Suitable for battery charging for cars,vans,light truck,etc.   6.Supplied with charging cable,charging clamps and fuses Please read manual before attempting to use this product          

Aegis boost plus. Used like new. Selling because I upgraded. Selling with the battery. Has the box with everything still inside.

The CBP-C1 Compact Battery Pac from Bolt will boost the number of flashes and the recycle time of your compatible Canon or Bolt VX-series flash. The CBP-C1 can operate on 4 or 8 AA batteries--alkaline, lithium, or nickel-hydride (Ni-MH). Lights on the pack indicate Standby, Recycle, or Low Power mode. A thermal protection switch prevents overheating. The CBP-C1 can provide up to 595 flashes per charge, and recycle times as fast as 1.24 seconds. The pack, which weighs just 7 oz without the batteries, can also be attached to the bottom of your camera using the tripod socket.