Back plate devices c

YOSH Round Metal Plate for Magnet Mount What good is having a magnet mount without the metal plates for the device to attach itself to the magnet? Bringing to you YOSH Round magnetic plate for mount, which is easy to attach onto device surfaces and to set up on the magnet mount for safe keeping of the device! Round metal magnetic plates to attach device onto magnet mounts. The magnetic plate mount easily sticks to the back of devices for easy mounting. Works with magnet mounts designed to hold devices with the metal plate. Great to use with smartphones and tablets. Easy to attach and remove without a hassle. Having a spare magnetic plate to go with your magnet mount is never harmful; after all, they are extremely useful to make the magnet mount work. This magnetic plate mount is Round with rounded corners that easily stick to the back of devices and the magnet mount so that the device can be securely held in place with the mount. The size of the Round magnetic plate is minimally larger than the device, made to assist all devices and steady mounting of them onto the magnet mount. The magnetic plate for mount gadgets is very easy to set up simply place the magnetic plate onto the back of the gadget you need to secure, attach it to the magnet mount and viola, your device will be held safely for as long as you want. The removal is also similarly easy. The magnetic plate will never scratch your device. Instructions Just peal of the sticker and attached it to your phone, tablet or GPS. Or insert it in your phone case. Click "Add to Cart" yellow button above and get it now for you!

[Perfect Compatibility] Magnetic Phone Holder Metal Plates, Best compatible with all smartphones and tablets. Perfectly works with magnetic phone holder [Safer and Easier to Use] Magnetic Metal Plates, Easily sticks on the back of devices and inside of protective cases [Component] Product includes 2 types of metal plates with 2 protection films. Best compatible with Spigen's QNMP Cases [Note] Metal plates will hinder wireless charging capabilities, and edges of the metal plates might be a bit sharp. Please use them carefully. Thin Protective Case recommended for the best result. Extra metal plates for Magnetic Phone Holder designed to hold devices with metal plates, and to easily attach / detach without a hassle. It easily sticks on the back of devices or inside of cases. In addition, it is compatible with smartphones and tablets.

This car magnet metal plate is designed to use with magnetic mobile phone car mount, magnetic air vent mount and other magnetic cellphone car mount. Good quality and value metal plates for magnetic cell phone holder All 10 pack magnet mount plates have strong 3m adhesive on the back - 4 pack rectangular and 6 pack round. Give you enough options to use with multiple devices. The rectangular thin metal plate is better for larger phones, iphone xs, xs max, xr, 8 plus, mini tablets and gps devices Super thin metal plate and add no perceptible bulk for your phone or phone case. This phone mount plate for cell phone magnets allows you to place your phone horizontally or vertically. No more phone falling off even going over bumpy roads 8 pack for multiple devices and 2 pack extra small metal plates. You can share the extra metal plates with your family members or friends. These car mount magnet plates are also great additions for various phone cases All of the metal plates are not magnetic plates, we recommend this metal mounting plate along with universal magnetic mounts for dashboard, vents, cd slot, windshield or windows. for WIRELESS CHARGING, please place metal plate on the phone AWAY FROM wireless charging sensor. Or place metal plate on phone case, remove case when wireless charging

Features: Great to use with ALL smartphones, tablets and GPS devices. The bigger rectangular mount metal plate can hold your GPS or tablets more stable. Safely protect your devices or hands from scratching. Easy to attach and remove without leaving a residue. How to Use: For Phone with a Case (Lifeproof Fre Case or case with a kickstand or ridges are not compatible) -- Stick the clear sticker outside of your phone case, then place the metal plate onto it. For Phone without a Case -- Stick the clear sticker on the center of back of your phone firstly, then place the metal plate onto it. Package Includes: 4x Rectangular mount metal plate 4x Big Round mount metal plate 4x Small Round mount metal plate Note: The 3M adhesive with the metal plate can not be used twice. We suggest to not use the plate outside of leather case or other soft case. They are just made of METAL without magnetism designed to attach your cellphone to magnetic car phone mounts. Please feel free to contact us firstly if there is any problem with this item. We are always here to help.

Universal Compatibility: NOTEThis is metal plates stick on magnet car mounts not magnetic plate. Volport metal plate is not only compatible with volport magnetic cell phone holder, but also can be used to all magnetic car phone mount holder. Holds phone to the magnet mount without any slippage. And the phone won't move or rattle even at high speeds with the top down. 10 metal plate for up to 8 devices: With the extra universal mounting plate, you can use as spares for other devices, including your mobile phone, gps and tablet. They won't interfere with the motion sense, internal battery and sensors of your device. 3M sticky type adhesive on the back: The 3m adhesive is strong enough to stick the phone even with a case on it. It will not come off in hot or cold weather. Package Include: 4 pack rectangular metal stickers for phone / GPS / tablet; 4 pack large round metal stickers for phone / GPS / tablet. For WIRELESS CHARGING: Please place metal plate on the phone AWAY FROM wireless charging sensor. Or place metal plate on phone case, remove case when wireless charging.

Feature: 1. With waterproof function, durable 2. Easy install and simple operation 3. High clear CCD camera read out, high-definition and wide viewing angles 4. Ensure your safe driving, to avoid any vehicle accidents Specification: Color Black Video Color Colorful Camera Dimension 23 * 23mm Sensor CCD Effective Pixels 720*540 Resolution 520TV lines Lens Angle 120° Working Power (DCV) 12V Operation Temperature - 20°C ~ +60°C RH95% Max Storage Temperature - 30°C ~ +60°C RH95% Max Current Consumption ≤ 300mA TV System NTSC 60HZ/PAL 50HZ Night Vision View Yes Waterproof IP67-68 Fitment JEEP Wrangler 2012-2013 Installation Guide: 1. Take out your stock license plate light at the back of your car 2. Fix the camera to where the stock license plate light was 3. Connect the built-in license plate light of the camera to where the stock license plate light was connected to get the power 4. Connect the power of the camera to your reverse lights - red wire to positive and black wire to negative 5. Connect the video cable of the camera to the extension cord 6. Connect the extension cord to your car monitor 7. You will see the images when your car is in reverse shift. Note: 1. We provide clear pictures, measurements where possible. Please check as much as possible to make sure the item is the one that you need. 2. Please allow 0.5-1 inch difference due to manual measurement.(1 inch=2.54cm) 3. The color of the actual items may slightly different from the listing images due to different computer screen, thanks for your understanding. 4. Instruction is not included.Professional Installation Is Highly Recommended Package Included: 1 X CCD Car Rear View Camera 1 X Power cable 1 X Extension cable 1 X User manual

Feature: 1.With waterproof function, durable. 2.Easy install and simple operation. 3.High clear CCD camera read out, high-definition and wide viewing angles. 4.Ensure your safe driving, to avoid any vehicle accidents.   Installation Guide: 1. Take out your stock license plate light at the back of your car. 2. Fix the camera to where the stock license plate light was. 3. Connect the built-in license plate light of the camera to where the stock license plate light was connected to get the power. 4. Connect the power of the camera to your reverse lights - red wire to positive and black wire to negative. 5. Connect the video cable of the camera to the extension cord. 6. Connect the extension cord to your car monitor. 7. You will see the images when your car is in reverse shift. Note: 1.We provide clear pictures, measurements where possible. Please check as much as possible to make sure the item is the one that you need. 2. Please allow 0.5-1 inch difference due to manual measurement.(1 inch=2.54cm) 3.The color of the actual items may slightly different from the listing images due to different computer screen, thanks for your understanding. 4.Instruction is not included.Professional Installation Is Highly Recommended!   Package Included: 1 X CCD Car Rear View Camera 1 X Power Cable 1 X Extension Cable 1 X User Manual   Specification: Color Black Video Color Colorful Camera Dimension 100*13*30mm Sensor CCD Effective Pixels 720*540 Resolution 520TV lines Lens Angle 170° Working Power (DCV) 12V Operation Temperature  -20°C+60°C RH95% Max Storage Temperature -30°C+60°C RH95% Max Current Consumption No more 300mA TV System NTSC 60HZ/PAL 50HZ Night Vision  View Support Waterproof IP67-68 Fitment SUBARU FORESTER/IMPREZA(Sedan 3 Carriages) SUBARU Outback (2007-2012) / Tribeca 2007-2012 (FOR REFERENCE)

170°CCD Image Reversing Rear View License Plate Camera For Ford Feature: With waterproof function, durable Easy install and simple operation High clear CCD camera read out, high-definition and wide viewing angles Ensure your safe driving, avoid any vehicle accidents Specification: Dimension: Approx. 60mm x 30mm x29mm Video Color: Colorful Effective Pixels: 580X540 Resolution: 420TV lines Lens Angle: 170° Minimum illumination. Operation Temperature: -20°C+80°C RH95% Storage Temperature: -30°C+80°C Working Power (DCV): 12V Current Consumption: 90mA Max Installation Guide: 1.Take out your stock license plate light at the back of your car 2.Fix the camera to where the stock license plate light was 3.Connect the built-in license plate light of the camera to where the stock license plate light was connected to get the power 4.Connect the power of the camera to your reverse lights - red wire to positive and black wire to negative 5.Connect the video cable of the camera to the extension cord 6.Connect the extension cord to your car monitor 7.You will see the images when your car is in reverse shift. Fitment: Ford Transit /Transit Connect Package Included: 1 X CCD Car Rear View Camera 1 X 5M Video Cable 1 X Power Supply Cable

Size: 12x6.6 Stock Crate Tandem Heavy Trailer Centre Divider Weight Capacity: 2800kg GVM Brakes: Electric Brakes Suspension: Heavy Duty Rocker Rollar Suspension Sides: 380mm Drawbar: 100mm x 50mm x 3mm Floor: Checker Plate 2.1mm Second Hand 14” or 15” Tyres LED Lights Special Number Plate Holder Heavy Duty Checker Mudguards Half Sliding Back Door with ramp Full Heavy Duty Tie Down Rails and Full Side Steps primed and painted in charcoal grey 12 months Warranty for 6” Jockey Wheel (Optional Extra) solid Axles, no Stub Axle Please call us on (071 - 052 - 7158)

The RAM Composite Universal Finger Grip Holder is designed to hold a large amount of cell phones and electronic devices. The holder comes with (3 sets) of four flexible rubber coated fingers placed along sides to grip your device. The fingers open by squeezing the ends to open the small finger arms. The bottom of the holder includes a back plate that adds support to the device being held by the mount. The perfect solution that is the best phone mount, car mount, motorcycle mount and can be used with several other phone accessories including Samsung accessories and lg accessories. The spine plate contains the universal AMPs and 1.5" x 2" hole patterns.

Compatibility: Apple: iPhone 7 Plus / iPhone 7 / iPhone 6s Plus / 6 Plus / 6s / 6, 5, 5S, 4, 4S, 3G, 3GS. Samsung: Galaxy Note 4, Note Edge, Galaxy S8 Plus, S8, S7, S6, S6 Edge, S6 Edge+, S5, S4 HTC: HTC ONE M9 / M8 Motorola: Droid Turbo, Nexus 4 / 5 / 6, LG / Sony Xperia Z4,Nokia and compatible with all smartphones up to 6 inch. Product Description: -Specifically compatible with all smartphones up to 6 inch, the intensive magnetic holder generates great attraction to hold any mobile device. -Extra-large strong suction PU cup attaches to either windshield or dashboard firmly and securely. Easy removal without residual or marks. -Full 360 degree swiveling or rotation for both portrait and landscape viewing without any obstruction. -Smooth magnetic round disc surface is perfectly suitable for easy installation and removal, will not do harm to your smartphone. -Compact design, made with innovation. Two rectangular magnetic metal plates included for multiple ways of mounting. Installation Guide: Option 1: Stick adhesive metal plate directly on the back of your smartphone/smartphone case. Option 2: Place the magnet metal plate in your case between the cover and the phone. Option 3: Place the metal plate between the removable battery cover and battery to hold the metal plate in place for use. Package Contents: - 1 x Magnetic PU Car Mount - 1 x Round adhesive Metal Plate - 1 x Rectangle Metal Plate Note: The metal plate and sticker may not work properly with devices having a curved back and the metal plate/sticker may affect wireless charging for some devices. The melting point of the suction-cup is 70. Please avoid leaving the car mount staying a long-lasting and too hot environment.

The Mengo Promise: Here at Mengo, we seek product perfection and customer satisfaction. Offering high quality products at an affordable price, we're confident you'll love your product! Should you have any technical or customer service related issues, our professional service agents are here to help. Dual Slit Mount with Magna-Snap Technology Magna-Snap mini universal magnetic car mount includes a dual slit mount, which can be easily inserted into your car vent. This mount differs from others because it has both the thicker and thinner slits, to ensure that it will perfectly fit whichever vent you have. Simply insert the Magna-Snap into the vent, place your device onto it, and enjoy easy viewing and 360 rotation. Multi-Purpose Use: Not only does the Magna-Snap mini magnetic air vent car mount serve as a convenience in your car, but it can also be used elsewhere. The Magna-Snap mount can be used as a holder for your phone, as it will hold the device up for easy viewing at any desk or table! How To Apply: Option 1: Using the round non-toxic, non-residue adhesive provided, stick the metal plate onto the back of the device Option 2: For devices with removable battery covers, the metal plate can be inserted right in between the battery and back door Option 3: Simply insert the included metal plate inside of your phone case (Not included) Please Note: Using any of the three suggested methods is safe and efficient. The adhesive can be easily removed from your device or case, and will not leave any sticky residue. Inserting the metal plate in between the battery and back door or on the inside of your case will not interfere with your devices' internet, cellular network, or navigation quality. The firm magnetic pull will hold your device in place with whichever method you decide to go use.

This OROT Magnetic Vent Car Mount Phone Holder is an excellent mounting device for phones! Easy Installation 1.Simply slide the pliable silicone mounting claw the air vent. 2.Stick the transparent film on the back of your device or your phone case which will protect the back of your phone/phone case from the sticker. 3.Place the round metal plate right on the transparent film on the back of your phone/phone case. 4. If you dont want the metal plate to stick outside, you can stick the lager metal plate at the back of your phone case.(Lager size metal will help your phone being held more stably.) Used for a Wide Range of Devices It can be used for almost all Smartphones including iPhone 6/6s/se/5/5s, Samsung Galaxy S7/ S7 Edge Plus/S6/S6 Edge/S5/S4, Note 3/4, HTC One/One X/One S/M7/M8/M9/M10, Nexus 5/4, 5X, 6P, LG G4/G3/V10. It also supports GPS Navigators. Elegant and Compact Design Elegant looking matches any car styles, compact and space-saving. Once you find your perfect angles in your car, you can enjoy the maximum view with its smarter design. Dual Compound Mode It is not only a phone holder in the car, but also used as a portable kickstand on tabletop Free your hands while watching movies at home! Unconditional Lifetime We are quite certain of quality and performance of the OROT Magnetic Car Mount Holder that we offer an associated unconditional lifetime. If you have any problems with the car mount, please contact us for a quick solution. Package in total included: OROT Magnetic Vent Mount x 2 Round Metal Plate x4 Larger Metal Plate x 2 Transparent film x 4 Product tips A thick phone above 2cm case could weaken magnetism. Thinner cases work better.

xhorizon Cradle-less Air Vent Magnetic Car Cell Phone Mount Holder Compatible with most smartphones as follows: (Please Note: the metal plate and sticker may not work properly with devices having a curved back) iPhone 6/6 Plus iPhone 5S/5C/5/4S/4/ Samsung Galaxy S6/S6Edge/S5/S4/S3 and Note II/III/4 Sony Xperia Z1/Z2/Z3/Z3 Compact/Z3+ LG G2/G3/G4 G Flex 2 HTC One M7/M8/M9 Nexus 4/5/6 Nokia Lumia Mltiple Ways of Attaching the Metal Insert Plate: *Stick the round adhesive metal plate directly on the device's back cover by using the 3M adhesive *Place the metal plate in between your device and its back cover *Stick the metal plate inside the removable battery cover of your device Instructions how to install the mount 1. Insert the mount in the Air Vent in your car. 2. Place the magnet metal plate in your case between the cover and the phone, Or stick on the round magnet metal on your phone or GPS Package includes: 1 * car mount set & 1 * cleaning cloth

Strong Magnetic Mount:The reinforced magnetic holder of this car mount produces an intensive force of attraction that will hold up your device securely,while allowing you to drive without distraction. Optimal Viewing Angle:Rotate your device and swivel your display as you please.It ensures optimal positioning angle, you can place your phone in any orientation, horizontal or vertical,enjoying the most effortless mounting experience. Soft Silicone-pad:The high quality soft silicone-pad clip construction ensures it easy to install and remove from the air vent without causing any damage.Two lever options ensures it can fit almost thickness car vent blades(1.5-3.5mm),one option for 1.5-2.5mm,and another for 2.5-3.5mm air vent blades. Metallic & Adhesive Plate: Equipped with round and rectangle metallic plates. The metallic plate for magnet can simply be placed between the device and its case. the adhesive metal plate also can stick to back of your device directly without case.[please Note: iPhone 7 and 7 plus Jet black have super slippery back which doesn't work with the adhesive metal plate, it requires a case to mount up] [12-Month]Wide Compatibility&Simple Design:Universally compatible with smartphones and mini tablets,including iPhone X/Xs/XR/Xs Max, iPhone 8/7 Plus, iPhone 8/7, iPod Touch, Galaxy S9/S9+,S8/S8+,S7/S7edge,LG,HTC,GPS and more devices.