Automation pin rs

Description: Interface Machine Automation 9 PIN RS-232 to RS-485 Bi-directional Converter Specifications: RS-232 to RS-485 turn, able to convert the RS-232 serial port TXD and RXD signals into two balanced half-duplex RS-485 signals. No external power supply directly from the 3-pin RS-232 port of stealing, while the 7-pin request to send (RTS), 4-pin Data Terminal Ready (DTR) to RS-232 to RS-485 auxiliary power supply, automatic flow control so you do not reset,hardware and software installation is very simple to use. Package Included: 1 x RS232 To RS485 Bi-directional Converter Details pictures:

Translucent USB To RS232 Serial 9 Pin Converter Cable Adapter Specification: Cable length: 3.5 Ft/1M Connecter input: USB1.1 port Connecter output: 9 pin RS 232 interface Features: USB 1.1/2.0 compliant Over 1 Mbps data transfer rate. This USB Converter Cable also upports remote wake-up and power management. Provide a simple and easy way to connect universal serial bus and serial port interface. Users have the capability to utilize the peripheral with plug & play swap function with this USB Converting Cord. System requirements: PC: IBM PC 486DX 4-100mHz CPU or higher or compatible system, available USB port, windows 98/Me/2000/XP. Apple Computer: power G3 or G4 CPU or higher or compatible system, available USB port,Mac OS 8.6 or higher. Please Note: It does not work for Win7 win8 Vista 64bit system. It does work for Win7 win8 Vista 32bit system. This 3.5 Feet USB to RS 232 Converter Cable is designed for ideal connections to cellular phone, d igital camera,modems or ISND terminal adaptor. Package Included: 1 x USB To RS232 Serial DB 9 PIN COM Port Converter cable

5Pcs Translucent USB To RS232 Serial 9 Pin Converter Cable Adapter Specification: Cable length: 3.5 Ft/1M Connecter input: USB1.1 port Connecter output: 9 pin RS 232 interface Features: USB 1.1/2.0 compliant Over 1 Mbps data transfer rate. This USB Converter Cable also upports remote wake-up and power management. Provide a simple and easy way to connect universal serial bus and serial port interface. Users have the capability to utilize the peripheral with plug & play swap function with this USB Converting Cord. System requirements: PC: IBM PC 486DX 4-100mHz CPU or higher or compatible system, available USB port, windows 98/Me/2000/XP. Apple Computer: power G3 or G4 CPU or higher or compatible system, available USB port,Mac OS 8.6 or higher. Please Note: It does not work for Win7 win8 Vista 64bit system. It does work for Win7 win8 Vista 32bit system. This 3.5 Feet USB to RS 232 Converter Cable is designed for ideal connections to cellular phone, d igital camera,modems or ISND terminal adaptor. Package Included: 5 x USB To RS232 Serial DB 9 PIN COM Port Converter cable

This item is sold brand new. It is ordered on demand from our supplier and is usually dispatched in 10 to 15 working days. We urge you to please read shipping details before placing your order. --------------------------------------- 1) Support RS 232 Serial interface (DB9). 2) Converts serial male to male connection. 3) Compact and high quality. 4) Tiny portable design. 5) Size: 3.2x1.8x1.3cm 6) Weight: 8 --------------------------------------- See what else we're selling

Feature: This Nano Ethernet Shield allows you to connect the Arduino Nano to a network. It is assembled with long stackable pin headers, and don’t need to solder the headers separately. The Nano Ethernet Shield is based on the ENC28J60 Ethernet chip which provide a network (IP) stack capable of both TCP and UDP. Use the Ethernet library to write sketches which connect to the internet using the add-on module. ENC28J60 is a 10BASE-T stand alone Ethernet unit with on board MAC & PHY, 8 Kbytes of Buffer RAM and an SPI serial interface for 3.3V and 5V logics. With a small size the Nano Ethernet Shield minimizes complexity, board space and cost. Target applications include VoIP, Industrial Automation, Building Automation, Home Control, Security and Instrumentation. Shield use power 5V from Nano board and convert to 3.3V (on shield have 3.3V LDO). Package includes: 1 x Nano Ethernet Shield

HT12D Decoder 18 DIP IC HT12D Decoder IC is a 212 series for remote control applications manufactured by Holtek. It is commonly used for radio frequency (RF) wireless applications. By using the paired  HT12E encoder and HT12D decoder we can transmit 12 bits of parallel data serially. HT12D simply converts serial data to its input (may be received through RF receiver) to 12 bit parallel data. These 12 bit parallel data is divided into 8 address bits and 4 data bits. Using 8 address bits we can provide 8-bit security code for 4-bit data and can be used to address multiple receivers by using the same transmitter. HT12D is a CMOS LSI IC and is capable of operating in a wide voltage range from 2.4V to 12V. Its power consumption is low and has high immunity an noise. The received data is checked 3 times for more accuracy. It has a built-in oscillator, we need to connect only a small external resistor. HT12D decoder will be in standby mode initially ie, an oscillator is disabled and a HIGH on DIN pin activates the oscillator. Thus the oscillator will be active when the decoder receives data transmitted by an encoder. The device starts decoding the input address and data. The decoder matches the received address three times continuously with the local address given to pin A0 – A7. If all matches, data bits are decoded and output pins D8 – D11 is activated. This valid data is indicated by making the pin VT (Valid Transmission) HIGH. This will continue until the address code becomes incorrect or no signal is received.     Used to convert Parallel 4-bit data  to series data     Highly useful in wireless communication projects involving RF or IR     Remote controlled systems like garage doors, Car alarm system, Car door controls etc.     Can be used in Home automation for short range remote switching     Safety systems like Burglar alarm system, Smoke or Fire alarm system etc. This item is available in stock and is not drop shipped. This avoids delays, customs charges and extra VAT.

(←please click here) (Due to the different batch,These board have two colors, Bule or Green, will be send in random, please note that before you buy it !!!) Suitable case: Parameter: LCD Type TFT LCD Interface SPI Touch Screen Type Resistive Touch Screen Controller XPT2046 Colors 65536 Backlight LED Resolution 320*480 (Pixel) Aspect Ratio 8:5 Power Consumption TBD Backlight Current TBD Operating Temp. (Centigrade) TBD Interface Definition: PIN NO. SYMBOL DESCRIPTION 1, 17 3.3V Power positive (3.3V power input) 2, 4 5V Power positive (5V power input) 3, 5, 7, 8, 10, 12, 13, 15, 16 NC NC 6, 9, 14, 20, 25 GND Ground 11 TP_IRQ Touch Panel interrupt, low level while the Touch Panel detects touching 18 LCD_RS Instruction/Data Register selection 19 LCD_SI / TP_SI SPI data input of LCD/Touch Panel 21 TP_SO SPI data output of Touch Panel 22 RST Reset 23 LCD_SCK / TP_SCK SPI clock of LCD/Touch Panel 24 LCD_CS LCD chip selection, low active 26 TP_CS Touch Panel chip selection, low active   Package included: 1 x 3.5 Inch 320 X 480 TFT LCD Display Touch Board

Features: Pin Number: 6 pins Wiring: solder type Total Size: About 78mx26mm(D*L) Waterproof rubber gasket: Silicone+Nylon Contact materials: copper (Gold plated) Suitable environmental conditions: Working temperature: -25 °C ~ 105 °C Storage temperature: -25 °C ~ 85 °C Atmospheric pressure: (86 ~ 106) KPa Relative humidity: ¿ 90% Waterproof grade: IP68 Rated current: 5A Rated voltage: 500V Accept the maximum cable diameter: 11 mm Shell Material: Nylon(260 °C temperature, V-0 flame retardant) Suitable for all kinds of large current equipment with automation. Package Includes: 1 x Waterproof Connector Detail Pictures:

Introduction:   What is ESP8285? ESP8285=ESP8266+1M Flash application temperature up to 125℃! First and  foremost the code programmed in ESP8266 could be used for ESP8295 intact.   ESP-M2 module core processor is the high-performance chip ESP8285, which is equal to ESP8266 chip plus 1M Flash. The chip ESP825 is encapsulated an advanced Tensilica's L106 32-bit CPU, together with SRAM. ESP825 has the full and complete WiFi function, which can be used independently and also used as a slave with other Hoster MCU, which can start directly from the out-built Flash. In addition, the built-in high-speed buffer is a benefit for the system performance. Especially, ESP8285 can be used as a WiFi adapter by SPI/SDIO and/or I2C/UART interface, when it is applied to the other MCU design.   Features: Ultra- small size; Support serial to WiFi; Wireless transparent transmission; Long distance transmission with ultra-low power; Support outboard antenna; Bearing high temperature to 125 ℃, compared to the 85℃ for ESP8266.   Specifications:   SOC characteristics Built-in Tensilica L106 ultra-low power 32-bit CPU, main frequency supports 80MHz and160MHz and RTOS; Built-in TCP/IP protocol; Built-in one-channel 10-bit high precision ADC; Outboard interface: HSPI, UART, I2C, I2S, IR Remote Control, PWM, GPIO; Deep sleep current is 10uA, the cut-off current is smaller than 5uA; Wake, connect and transmission data package within 2ms; The consumer power is smaller 1.0Mw (DTIM3) when at standby status; Built-in 1M byte for SPI Flash.   WiFi characteristics Support 802.11 b/g/n/e/I; Support Station, Soft AP, Soft AP+STA mode; Support WiFi Direct (P2P); Support CCMP (CBC-MAC, computation mode), TKIP (MIC, RC4), WAPI (SMS4), WEP (RC4), CRC etc., for hardware acceleration. P2P finding, P2P GO mode/ GC mode and P2P power manage WPA/PA2PSK and WPS; 802.11 securitycertification: pre-certification and TSN Support 802.11n (2.4GHz); 802.1h/RFC1042 frame encapsulation; Support seam less roaming; Support AT remote update and cloud update (OTA); Support Smart Config function (including Android and Ios device).   Module interface:   2* UART; 1*ADC; 1*En; 1*wakeup pin; 1*HSPI; 1*I2C; 1*I2S More than 10*GPIOs Working temperature: -40℃-+125℃; Module size: 12.3*20mm   Applications:   Electrical appliance; Smart power plug, smart light; Infant monitor; Sensor networks; Security ID label; Wireless location beacon; Home automation; Mesh networks; IP video camera; Wearable electronics; Wireless location recognition; Industrial wireless control;   Package included:   1 x Mini ESP-M2 ESP8285 Serial Wireless WiFi Transmission Module

Overview: What is ESP8285? ESP8285=ESP8266+1M Flash, the bearing high temperature is 125??(the one for ESP8266 is just 85??. More important, the code programmed in ESP8266 can be used for ESP8285 intactly. ESP-M3 is encapsulated by the high performance chip ESP8285, which is equal to ESP8266 chip plus 1M Flash. The chip ESP825 is encapsulated a advanced Tensilica’s L106 32-bit CPU, together with SRAM. ESP825 has the full and complete WiFi fuction, which can used independently and alsoused as a slaver with other Hoster MCU, which can start directly from the out-built Flash. In addition, the built-in high-speed buffer is benefit for the system performance. Especially, ESP8285 can be used as a WiFi adapter by SPI/SDIO and/or I2C/UART interface, when it is applied to the other MCU design. Features: Ultra-small size; Support serial to WiFi; Wireless transparent transmission; Long distance transmission with ultra-low power; Bearing high temperature to 125 ?? compared to the 85??for ESP8266. Specification: https://github.com/SmartArduino/SZDOITWiKi/wiki SOC characteristics: Built-in Tensilica L106 ultra-low power 32-bit CPU, main frequency supports 80MHz and160MHz, and RTOS; Built-in TCP/IP protocol; Built-in one-channel 10-bit high precision ADC; Outboard interface: HSPI, UART, I2C, I2S, IR Remote Controk, PWM, GPIO; Deep sleep current is 10uA, the cut-off current is smaller than 5uA; Wake,connect and transmission data package within 2ms; The consume power is smaller 1.0Mw (DTIM3) when at stand by status; Built in 1M byte for SPI Flash. WiFi characteristics: Support 802.11 b/g/n/e/I; Support Station, Soft AP, Soft AP+STA mode; Support WiFi Direct (P2P); Support CCMP (CBC-MAC, computation mode), TKIP (MIC, RC4), WAPI (SMS4), WEP (RC4), CRC etc., for hardware acceleration. P2P finding, P2P GO mode/ GC mode and P2P power manage WPA/PA2PSK and WPS; 802.11 securitycertification: pre-certification and TSN Support 802.11n (2.4GHz); 802.1h/RFC1042 frame encapsulation; Support seam less roaming; Support AT remote update and cloud update (OTA); Support Smart Config function (including Android and Ios device). Module interface: 2* UART; 1*ADC; 1*En; 1*wakeup pin; 1*HSPI; 1*I2C; 1*I2S More than 10*GPIOs Working temperature: -40??+125?? Module size: 26.8mm*16mm Electronical appliance: Smart power plug, smart light; Infant monitor; Sensor networks; Security ID label; Wireless location beacon; Home automation; Mesh networks; IP video camera; Wearable electronics; Wireless location recognition; Industrial wireless control; Package included: 1 x ESP-M3 Wireless WiFi Transmission Module

Introduction: What is ESP8285? ESP8285=ESP8266+1M Flash application temperature up to 125￢ﾄﾃ! First and foremost the code programmed in ESP8266 could be used for ESP8295 intact. ESP-M2 module core processor is the high-performance chip ESP8285, which is equal to ESP8266 chip plus 1M Flash. The chip ESP825 is encapsulated an advanced Tensilica’s L106 32-bit CPU, together with SRAM. ESP825 has the full and complete WiFi function, which can be used independently and also used as a slave with other Hoster MCU, which can start directly from the out-built Flash. In addition, the built-in high-speed buffer is a benefit for the system performance. Especially, ESP8285 can be used as a WiFi adapter by SPI/SDIO and/or I2C/UART interface, when it is applied to the other MCU design. Features: Ultra- small size; Support serial to WiFi; Wireless transparent transmission; Long distance transmission with ultra-low power; Support outboard antenna; Bearing high temperature to 125 ￢ﾄﾃ, compared to the 85￢ﾄﾃ for ESP8266. Specifications: SOC characteristics Built-in Tensilica L106 ultra-low power 32-bit CPU, main frequency supports 80MHz and160MHz and RTOS; Built-in TCP/IP protocol; Built-in one-channel 10-bit high precision ADC; Outboard interface: HSPI, UART, I2C, I2S, IR Remote Control, PWM, GPIO; Deep sleep current is 10uA, the cut-off current is smaller than 5uA; Wake, connect and transmission data package within 2ms; The consumer power is smaller 1.0Mw (DTIM3) when at standby status; Built-in 1M byte for SPI Flash. WiFi characteristics Support 802.11 b/g/n/e/I; Support Station, Soft AP, Soft AP+STA mode; Support WiFi Direct (P2P); Support CCMP (CBC-MAC, computation mode), TKIP (MIC, RC4), WAPI (SMS4), WEP (RC4), CRC etc., for hardware acceleration. P2P finding, P2P GO mode/ GC mode and P2P power manage WPA/PA2PSK and WPS; 802.11 securitycertification: pre-certification and TSN Support 802.11n (2.4GHz); 802.1h/RFC1042 frame encapsulation; Support seamless roaming; Support AT remote update and cloud update (OTA); Support Smart Config function (including Android and Ios device). Module interface: 2* UART; 1*ADC; 1*En; 1*wakeup pin; 1*HSPI; 1*I2C; 1*I2S More than 10*GPIOs Working temperature: -40￢ﾄﾃ-+125￢ﾄﾃ; Module size: 12.3*20mm Applications: Electrical appliance; Smart power plug, smart light; Infant monitor; Sensor networks; Security ID label; Wireless location beacon; Home automation; Mesh networks; IP video camera; Wearable electronics; Wireless location recognition; Industrial wireless control; Package included: 3 x Mini ESP-M2 ESP8285 Serial Wireless WiFi Transmission Module

Product Description:   ESP-12N is encapsulated  by the high performance chip ESP8266EX. The chip is encapsulated a advanced Tensilica's L106 32-bit MCU, with 16-bit short mode, basic frequency support 80 MHz, 160 MHz, supports RTOS. ESP8266EX has the full and complete WiFi fuction, which can used independently and alsoused as a slaver with other Hoster MCU, which can start directly from the out-built Flash. In addition, the built-in high-speed buffer is helpful for the system performance. Especially, ESP8266EX can be used as a WiFi adapter by SPI/SDIO and/or I2C/UART interface, when it is applied to the other MCU design.   SOC characteristics:   Built-in Tensilica L106 ultra-low power 32-bit CPU, main frequency supports 80MHz and160MHz, and RTOS; Built-in TCP/IP protocol; Built-in one-channel 10-bit high precision ADC; Outboard interface: HSPI, UART, I2C, I2S, IR Remote Controk, PWM, GPIO; Deep sleep current is 10uA, the cut-off current is smaller than 5uA; Wake,connect and transmission data package within 2ms; The consume power is smaller 1.0Mw (DTIM3) when at stand by status; Built in 1M byte for SPI Flash.   WiFi characteristics:   Support 802.11 b/g/n/e/I; Support Station, Soft AP, Soft AP+STA mode; Support WiFi Direct (P2P); Support CCMP (CBC-MAC, computation mode), TKIP (MIC, RC4), WAPI (SMS4), WEP (RC4), CRC etc., for hardware acceleration. P2P finding, P2P GO mode/ GC mode and P2P power manage WPA/PA2PSK and WPS; 802.11 security certification: pre-certification and TSN Support 802.11n (2.4GHz); 802.1h/RFC1042 frame encapsulation; Support seam less roaming; Support AT remote update and cloud update (OTA); Support Smart Config function (including Android and Ios device).   Module interface:   2* UART; 1*ADC; 1*En; 1*wakeup pin; 1*HSPI; 1*I2C; 1*I2S More than 10*GPIOs   Working temperature:   -40℃-+125℃;   Module size:   16mm×24mm   Application: Electronical appliance; Smart power plug, smart light; Infant monitor; Sensor networks; Security ID label; Wireless location beacon; Home automation; Mesh networks; IP video camera; Wearable electronics; Wireless location recognition; Industrial wireless control;   Package included:   1 x ESP-12N ESP8266 Remote Serial Port WIFI Wireless Module  

HP LTO-3 Ultrium 800 GB Re-writable Data Cartridge, Retail Box, 1 year limited warranty Product Overview This HP C7973A Storage works LTO-3 Ultrium 800GB Rewritable Data Cartridge offers high performance and fast data transfer speeds for all your storage needs. It has been rigorously tested to ensure excellent reliability. The simplified tape path reduces wear and tear for consistently reliable performance. The data cartridge features 400GB native capacity and a 2: 1 compressed 800GB capacity, giving you plenty of space for your data. The tape features a smoother base film and smaller magnetic particles, increasing the bit density and creating even more space on the tape. Its memory chip delivers a fast access time and improved media monitoring. Third generation HPE Ultrium 800GB RW Data Cartridge offers the highest capacity and best cost per GB of any tape technology available, re-enforced by the HPE Brand specification - the industry's most demanding media quality standard. The HP LTO-3 Ultrium data cartridges are an affordable and effective way to store your data. Highlights • Capacity: 400 GB (native) / Compressed 2:1 Capacity: 800 GB • Transfer Speed: 80MB/sec (native) / 120MB/sec (Max. compressed) • 704 data tracks, 680 meter length, 245 kbits per inch and Tape Thickness: 8.0um • Metal Particle Base Material • LTO Ultrium cartridge memory chip delivers faster access time and enhanced media monitoring. • First time restore ensured with fewer media failures and disrupted backups, regardless of duty cycle or environmental conditions. • Superior 'smart grabber' mechanism and mechanical interlock to prevent the leader pin from being pulled inside the tape housing. • Sensors detect proper connection and prevent leader loss that would ruin the tape. • Simplified tape path to reduce wear and tear and build-up of and debris (important in automation). • HPE warrants LTO Ultrium cartridges for up to 30 years archival life and/or 260 full backups.

Introduction: What is ESP8285? ESP8285=ESP8266+1M Flash application temperature up to 125?? First and foremost the code programmed in ESP8266 could be used for ESP8295 intact. ESP-M2 module core processor is the high-performance chip ESP8285, which is equal to ESP8266 chip plus 1M Flash. The chip ESP825 is encapsulated an advanced Tensilica’s L106 32-bit CPU, together with SRAM. ESP825 has the full and complete WiFi function, which can be used independently and also used as a slave with other Hoster MCU, which can start directly from the out-built Flash. In addition, the built-in high-speed buffer is a benefit for the system performance. Especially, ESP8285 can be used as a WiFi adapter by SPI/SDIO and/or I2C/UART interface, when it is applied to the other MCU design. Features: Ultra- small size; Support serial to WiFi; Wireless transparent transmission; Long distance transmission with ultra-low power; Support outboard antenna; Bearing high temperature to 125 ?? compared to the 85??for ESP8266. Specifications: SOC characteristics Built-in Tensilica L106 ultra-low power 32-bit CPU, main frequency supports 80MHz and160MHz and RTOS; Built-in TCP/IP protocol; Built-in one-channel 10-bit high precision ADC; Outboard interface: HSPI, UART, I2C, I2S, IR Remote Control, PWM, GPIO; Deep sleep current is 10uA, the cut-off current is smaller than 5uA; Wake, connect and transmission data package within 2ms; The consumer power is smaller 1.0Mw (DTIM3) when at standby status; Built-in 1M byte for SPI Flash. WiFi characteristics Support 802.11 b/g/n/e/I; Support Station, Soft AP, Soft AP+STA mode; Support WiFi Direct (P2P); Support CCMP (CBC-MAC, computation mode), TKIP (MIC, RC4), WAPI (SMS4), WEP (RC4), CRC etc., for hardware acceleration. P2P finding, P2P GO mode/ GC mode and P2P power manage WPA/PA2PSK and WPS; 802.11 securitycertification: pre-certification and TSN Support 802.11n (2.4GHz); 802.1h/RFC1042 frame encapsulation; Support seamless roaming; Support AT remote update and cloud update (OTA); Support Smart Config function (including Android and Ios device). Module interface: 2* UART; 1*ADC; 1*En; 1*wakeup pin; 1*HSPI; 1*I2C; 1*I2S More than 10*GPIOs Working temperature: -40??+125?? Module size: 12.3*20mm Applications: Electrical appliance; Smart power plug, smart light; Infant monitor; Sensor networks; Security ID label; Wireless location beacon; Home automation; Mesh networks; IP video camera; Wearable electronics; Wireless location recognition; Industrial wireless control; Package included: 3 x Mini ESP-M2 ESP8285 Serial Wireless WiFi Transmission Module