Auto obd speed lock

Feature: 1. TOYOTA automotive products and equipment. 2. Fully automatic switching device to make your life more secure. 3. Simple installation. Specification: Material PC Voltage DC 12V Car Make Specialized for Speed lock device for original Toyota Type Car speed lock Appliance TOYOTA Package Included: 1 X Car OBD Door Lock

Buy OBD Module Window Closer+ Mirror Auto Fold + Speed Lock for Toyota Land Cruiser 200 LC 200 FJ200 for R375.00

Buy Portable OBD Canbus Door Lock / Speed Lock Car Safety Door Lock & Unlock OBD Module for 2013-2015 Fo for R534.20

Buy Portable OBD Canbus Door Lock Speed Lock Car Safety Door Lock & Unlock OBD Module for 2014-2015... for R753.64

Buy Portable OBD Canbus Door Lock/Speed Lock Car Safety Door Lock & Unlock OBD Module for 2016 Honda... for R503.86

Buy Portable OBD Canbus Speed Lock Car Safety Door Lock & Unlock OBD Module for Toyota for R639.00

Buy Portable OBD Canbus Speed Lock Car Safety Door Lock & Unlock OBD Module for Toyota for R740.00

Buy Portable OBD Canbus Speed Lock and Unlock Flameout Car Safety OBD Module for Subaru 2015 Outback Tig for R423.57

Buy Portable OBD Canbus Speed Lock and Unlock Flameout Car Safety OBD Module for Subaru 2015 Outback... for R391.16

Operation: 1. Add Remote Control Get on the car and close the door, insert the key and turn the key. Insert the device into OBD. When hearing the sound(Dee-), it will start to add the remote control. When hearing the sound (Dee- Dee-),open the door. When hearing the harsh sound, press ¿ lock & unlock¿ key at the same time. And press the¿ lock¿ key. If there is treble end, It¿s OK. Note: Switch is on the right (Add Remote Control). 2. Add Transponder Get on the car and close the door, insert the main key into the lock and turn the key, and then insert the device into the OBD. If it will sound twice, it will start to add transponder. After hearing the sound (Dee-Dee-), 2-3 minutes later, anti-theft light is on. And then remove the key(anti-theft light will flash), insert the new key and doesn¿t need turn the key, anti-theft light will be off later. Note: switch is on the left.(Add Transponder) -Apply to 4D67,68,72(G), support both G and H chip. Specification: Color: Green Apply to 4D67,68,72(G), support both G and H chip. Package Included: 1 X OBD Remote Key Programmer

2016 Ford Ranger Wildtrak 3.2 TDCi Auto 4X4- Moondust Silver finished in Wildtrack Orange Trim- Plastic Load Bin Liner, Towbar, Roof Rails, Running Boards, Cloth Leather Combo, Multi Function Steering, Auto 6 Speed Box, Rear View Camera, Collision Avoidance Assist, Diamond Faced 18" Alloys, PDC Front and Rear, Bluetooth, Auto Lights, Hi Level LCD Radio Display, Electric Seats, Cup Holders, Diff Lock, Front Fogs, THIS BABY IS BRAND NEW AND SO HOT- Only 250km, Balance of 5yr/ 90 000km Service PlanR 599,900

Speed sensitive Electric Power Steering Adjustable steering Electronic Parking Brake Driving modes (Standard, Sport, Snow) Dynamic adjustable steering modes (Sport, Comfort, Light) Cruise Control 18 Inch Alloy Wheels Panoramic Sunroof Leather Steering Wheel Paddle Shift 7-inch colour instrument cluster (LCD) Wireless charging Front 12V power outlet Dashcam Power outlet Leather seats Driver seat Electric adjust: 6 directions 60:40 split folding rear seats Dual and front Side airbags Curtain Airbags Child lock ABS + EBD (Electronic Brakeforce Distribution) + BA (Brake Assist) Electronic Stability System (ESC) + Traction Control (TCS) Anti-Roll System (RMI) + Secondary Collision Mitigation (SCM) Hill Assist Downhill Assist Tyre pressure monitoring system (TPMS) Rear park distance sensors Reverse camera with Guidelines 360 Degree panoramic Camera Adaptive Cruise, Traffic Jam assist and Intelligent Turning Assist Traffic sign recognition Pre-collision warning, Automatic emergency braking Lane Departure Alert, Lane Keeping Assist and Lane Centre Keeping Blind spot detection and Lane change assist Driving fatigue detection Keyless entry and Push button start Bluetooth Handsfree and Front, rear dual USB connector 3-inch multimedia touch display 6-speaker system Speed Sensitive Volume Control Automatic headlights LED headlights High Beam Assist Electric height-adjusting headlights and follow me home function Daytime running lamps Dual Zone Auto Aircon with Rear aircon duct

E300 Car HUD Head Up Display 5.5 inch with OBD OBD2 Interface Plug HUD Main Feature: 5.5" screen. 2D visual effect. Auto power on and off with the vehicle. Automatic and manual brightness adjustment mode. Plug and Play connectivity with any OBDII or EUOBD capable vehicle. Multi colour design makes the screen easier to read highlight important details for quick viewing. The use of nanotechnology to eliminate unwanted reflections making the information easier to read. Ability to display a huge range of car statistics including: speed, engine rotational speed, water temperature, battery voltage, instantaneous fuel consumption, average fuel consumption, local time,single driving time,mileage measurement, shift reminder, fatigued driver reminder, low voltage alarm, high temperature alarm, speed alarm, engine fault alarm, fault code elimination, ability to change units e.g. Kilometre/mile. HUD Installation Procedure: 1. Ensure your vehicle is OBDII compatible or EUOBD.     a.  Check around the area under the steering wheel for an OBD plug     b.  Contact your vehicle manufacturer or search online     c.  Open the bonnet and look for a OBDII compatible sticker (this is NOT on all OBDII compatible cars, therefore isn't a deciding factor) 2. Locate the 16 pin diagnostic link. This is usually located in the area under the steering wheel. 3. Start vehicle's engine and ensure power switch is in the on position. 4. HUD will power on with engine     a. If the HUD displays vehicle voltage, fuel consumption, speed and rotational speed the unit has installed correctly.     b. Failing the above: Wait up to one minute for software to sync and confirm OBD cable is plugged in properly. Reflective Film Installation: 1. Place the supplied non-slip mat in the desired position on the dashboard with the HUD on top. 2. Observing where the HUD reflects place the reflective film in position. a. Ensure the surface is clean and dry before installing the film; b. Remove the back protective side marked (1) and attach the film to the clean windscreen; c. Once you're satisfied with the location use a credit card or similar to remove any bubbles or air pockets that remain; d. Remove the front side marked (2), if you need to adjust the HUD's reflection, reposition using the nonslip mat. Technical Parameter:  Environment Temperature  -40℃ ~ +80℃  Barometric Press  86 ~ 106KPa  Relative Humidity  10% ~ 95%  Environment Noise  ≤60dB  Alarm Decibel  ≥30dB(A)  Work Voltage  9V ~ 16Vdc(12Vdc/400mA)  Product Dimensions  12.5 * 7.5 * 1.5(cm)  Product Weight  110g Package Included: 1 X E300 Head Up Display 1 X Reflective Film 1 X OBD Connecting Line 1 X User Manual

E300 Car HUD Head Up Display 5.5 inch with OBD OBD2 Interface Plug HUD Main Feature: 5.5” screen. 2D visual effect. Auto power on and off with the vehicle. Automatic and manual brightness adjustment mode. Plug and Play connectivity with any OBDII or EUOBD capable vehicle. Multi colour design makes the screen easier to read highlight important details for quick viewing. The use of nanotechnology to eliminate unwanted reflections making the information easier to read. Ability to display a huge range of car statistics including: speed, engine rotational speed, water temperature, battery voltage, instantaneous fuel consumption, average fuel consumption, local time,single driving time,mileage measurement, shift reminder, fatigued driver reminder, low voltage alarm, high temperature alarm, speed alarm, engine fault alarm, fault code elimination, ability to change units e.g. Kilometre/mile. HUD Installation Procedure: 1. Ensure your vehicle is OBDII compatible or EUOBD. a. Check around the area under the steering wheel for an OBD plug b. Contact your vehicle manufacturer or search online c. Open the bonnet and look for a OBDII compatible sticker (this is NOT on all OBDII compatible cars, therefore isn’t a deciding factor) 2. Locate the 16 pin diagnostic link. This is usually located in the area under the steering wheel. 3. Start vehicle’s engine and ensure power switch is in the on position. 4. HUD will power on with engine a. If the HUD displays vehicle voltage, fuel consumption, speed and rotational speed the unit has installed correctly. b. Failing the above: Wait up to one minute for software to sync and confirm OBD cable is plugged in properly. Reflective Film Installation: 1. Place the supplied non-slip mat in the desired position on the dashboard with the HUD on top. 2. Observing where the HUD reflects place the reflective film in position. a. Ensure the surface is clean and dry before installing the film; b. Remove the back protective side marked (1) and attach the film to the clean windscreen; c. Once you’re satisfied with the location use a credit card or similar to remove any bubbles or air pockets that remain; d. Remove the front side marked (2), if you need to adjust the HUD’s reflection, reposition using the nonslip mat. Technical Parameter: Environment Temperature -40??~ +80??/td> Barometric Press 86 ~ 106KPa Relative Humidity 10% ~ 95% Environment Noise ≤60dB Alarm Decibel ≥30dB(A) Work Voltage 9V ~ 16Vdc(12Vdc/400mA) Product Dimensions 12.5 * 7.5 * 1.5(cm) Product Weight 110g Package Included: 1 X E300 Head Up Display 1 X Reflective Film 1 X OBD Connecting Line 1 X User Manual

E300 Car HUD Head Up Display 5.5 inch with OBD OBD2 Interface Plug HUD Main Feature: 5.5” screen. 2D visual effect. Auto power on and off with the vehicle. Automatic and manual brightness adjustment mode. Plug and Play connectivity with any OBDII or EUOBD capable vehicle. Multi colour design makes the screen easier to read highlight important details for quick viewing. The use of nanotechnology to eliminate unwanted reflections making the information easier to read. Ability to display a huge range of car statistics including: speed, engine rotational speed, water temperature, battery voltage, instantaneous fuel consumption, average fuel consumption, local time,single driving time,mileage measurement, shift reminder, fatigued driver reminder, low voltage alarm, high temperature alarm, speed alarm, engine fault alarm, fault code elimination, ability to change units e.g. Kilometre/mile. HUD Installation Procedure: 1. Ensure your vehicle is OBDII compatible or EUOBD. a. Check around the area under the steering wheel for an OBD plug b. Contact your vehicle manufacturer or search online c. Open the bonnet and look for a OBDII compatible sticker (this is NOT on all OBDII compatible cars, therefore isn’t a deciding factor) 2. Locate the 16 pin diagnostic link. This is usually located in the area under the steering wheel. 3. Start vehicle’s engine and ensure power switch is in the on position. 4. HUD will power on with engine a. If the HUD displays vehicle voltage, fuel consumption, speed and rotational speed the unit has installed correctly. b. Failing the above: Wait up to one minute for software to sync and confirm OBD cable is plugged in properly. Reflective Film Installation: 1. Place the supplied non-slip mat in the desired position on the dashboard with the HUD on top. 2. Observing where the HUD reflects place the reflective film in position. a. Ensure the surface is clean and dry before installing the film; b. Remove the back protective side marked (1) and attach the film to the clean windscreen; c. Once you’re satisfied with the location use a credit card or similar to remove any bubbles or air pockets that remain; d. Remove the front side marked (2), if you need to adjust the HUD’s reflection, reposition using the nonslip mat. Technical Parameter: Environment Temperature -40￢ﾄﾃ ~ +80￢ﾄﾃ Barometric Press 86 ~ 106KPa Relative Humidity 10% ~ 95% Environment Noise ≤60dB Alarm Decibel ≥30dB(A) Work Voltage 9V ~ 16Vdc(12Vdc/400mA) Product Dimensions 12.5 * 7.5 * 1.5(cm) Product Weight 110g Package Included: 1 X E300 Head Up Display 1 X Reflective Film 1 X OBD Connecting Line 1 X User Manual