Atmel microcontroller

  ATMEL ATmega328P-PU 8 Bit Microcontroller IC 28 Pin DIP    Product Details   ATmega328P 8-Bit megaAVR picoPower Microcontrollers The Atmel ATmega328P Microcontroller is an 8-bit megaAVR device based on the AVR enhanced RISC architecture. Featured is picoPower technology that offers ultra-low power consumption and low-power sleep modes, ideal for battery powered applications. Microcontroller Features •20 MHz Max. Operating Frequency •Up to 20 MIPS at 20 MHz •32 KB Flash •1024 B EEPROM •2 KB SRAM •131 Instructions – Most single clock cycle execution •32 General Purpose Registers •23 GPIO •Power-on Reset and Programmable Brown-out Detection •Internal Calibrated Oscillator •External and Internal Interrupt Sources •Six Power-Saving Sleep Modes •Internal and External Interrupts •Fully Static Operation Peripheral Features •10-bit 15 ksps Analogue-to-Digital Converter (ADC) – 8 or 6 channels •Capacitive Touch Sense – 16 channels •Temperature Sensor •Two 8-bit Timers •One 16-bit Timer •Output Compare Module – 6 channels •Six PWM Channels •Programmable Serial USART •Master/Slave SPI Serial Interface •Byte-oriented 2-wire Serial Interface – I2C compatible •Programmable Watchdog Timer with Separate Oscillator •Analogue Comparator •Interrupt and Wake-up on Pin Change      

Description ARD DUE 32BIT ARM PLATFORM | Microcontroller A000062-The Arduino Due is a Microcontroller Board based on the Atmel SAM3X8E ARM Cortex-M3 CPU Overview The Arduino Due is a microcontroller board based on the Atmel SAM3X8E ARM Cortex-M3 CPU It is the first Arduino board based on a 32-bit ARM core microcontroller It has 54 digital input/output pins (of which 12 can be used as PWM outputs), 12 analog inputs, 4 UARTs (hardware serial ports), a 84 MHz clock, an USB OTG capable connection, 2 DAC (digital to analog), 2 TWI, a power jack, an SPI header, a JTAG header, a reset button and an erase button The board contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started The Due is compatible with all Arduino shields that work at 3.3V and are compliant with the 1.0 Arduino pinout The Due follows the 1.0 pinout: TWI: SDA and SCL pins that are near to the AREF pin The IOREF pin which allows an attached shield with the proper configuration to adapt to the voltage provided by the board. This enables shield compatibility with a 3.3V board like the Due and AVR-based boards which operate at 5V An unconnected pin, reserved for future use Warning: Unlike other Arduino boards, the Arduino Due board runs at 3.3V The maximum voltage that the I/O pins can tolerate is 3.3V Providing higher voltages, like 5V to an I/O pin could damage the board Specifications Microcontroller: AT91SAM3X8E Operating Voltage: 3.3V Input Voltage (recommended): 7~12V Input Voltage (limits): 6~20V Digital I/O Pins: 54 (of which 12 provide PWM output) Analog Input Pins: 12 Analog Outputs Pins: 2 (DAC) Total DC Output Current on all I/O lines: 130 mA DC Current for 3.3V Pin: 800 mA DC Current for 5V Pin: 800 mA Flash Memory: 512 KB all available for the user applications SRAM: 96 KB (two banks: 64KB and 32KB) Clock Speed: 84 MHz More Information View More Information More Products View More Products

3.3V 8MHz ATmega328P-AU Pro Mini Microcontroller Board With Pins For Arduino Description: The Pro Mini is a microcontroller board based on the ATmega328 for Arduino. With 14 digital input / output pins (of which 6 can be used as PWM outputs), 8 analog inputs, an on-board resonator, a reset button, and holes for mounting pin headers. Six pin header can be connected to an FTDI cable to provide USB power and communication to the board. Feature: Using ATmel Atmega328P-AU MCU TTL level serial port transceiver RX / TX Six PWM ports D3, D5, D6, D9, D10, D11 Supporting serial download Supporting external DC 2.4V ~ 12V power Supporting 12V (or below) battery power Specification: Microcontroller: ATmega328 Operating Voltage: 3.3V Input Voltage: 3.35V ~ 12V Digital I/O Pins: 14 (of which 6 provide PWM output) Analog Input Pins: 8 DC Current Per I/O Pin: 40mA Flash Memory: 32KB (of which 2KB used by bootloader) SRAM: 1KB EEPROM: 512bytes Clock Speed: 8MHz Size: 33.3 x 17.6mm Package included: 1 x 3.3V 8MHz Pro Mini(With Pins)  

3Pcs 3.3V 8MHz ATmega328P-AU Pro Mini Microcontroller Board For Arduino Description: The Pro Mini is a microcontroller board based on the ATmega328 for Arduino. With 14 digital input / output pins (of which 6 can be used as PWM outputs), 8 analog inputs, an on-board resonator, a reset button, and holes for mounting pin headers. Six pin header can be connected to an FTDI cable to provide USB power and communication to the board. Feature: Using ATmel Atmega328P-AU MCU TTL level serial port transceiver RX / TX Six PWM ports D3, D5, D6, D9, D10, D11 Supporting serial download Supporting external DC 2.4V ~ 12V power Supporting 12V (or below) battery power Specification: Microcontroller: ATmega328 Operating Voltage: 3.3V Input Voltage: 3.35V ~ 12V Digital I/O Pins: 14 (of which 6 provide PWM output) Analog Input Pins: 8 DC Current Per I/O Pin: 40mA Flash Memory: 32KB (of which 2KB used by bootloader) SRAM: 1KB EEPROM: 512bytes Clock Speed: 8MHz Size: 33.3 x 17.6mm Package included: 3 x 3.3V 8MHz Pro Mini(With Pins)

Feature: When you use Arduino Due as the controller of your 3D Printer, you may find the RAMPS1.4 is not compatible with DUE. As you know the Arduino Due is a microcontroller board based on the Atmel SAM3X8E ARM Cortex-M3, the importance is the Atmel SAM3X8E chip used on the Due operates at 3.3V, worse applying 5V to the Due's inputs will likely damage the chip. So we create a new RAMPS variant which is compatible with the Due to replace Ramps1.4. Why should I use Ramps-FD instead of Ramps1.4? Campare Ramps-FD with Ramps1.4, the improvements of Ramps-FD are below: * The RAMPS-FD has other hardware protection, through the jumper cap control motor drive IC * The RAMPS-FD Much more than Ramps1.4 2-way PWM * The RAMPS-FD has Larger driving power than Ramps1.4 * The RAMPS-FD power has two choices: 12V and 24V Why should I select Arduino DUE instead of Arduino Mega? * CPU operates at 3.3V * High-current IO pins are capable of 15 mA source, 9 mA sink * Low-current IO pins capable of 3 mA source, 6 mA sink * CPU package has an absolute max of 130mA * The Due has 1 dedicated SPI port, and 4 multipurpose USART/SPI ports. The SPI port is only routed to the 6 pin header used for ICSP on Mega, but this is not used for ICSP on Due * The Due does not have any EEPROM * Due has lower power, computing faster and flash, sram bigger than mega2560. You will need to buy a LCD adapter for RAMPS-FD. Package includes: 1 x RAMPS-FD Shield for Arduino DUE

Feature: Professional version of the Mini Pro is a micro controller circuit board. It has 20 digital input/output pin (six of them can be used as a PWM output), 8 analog input, a 16MHZ resonator, a reset button, the installation hole lead foot. Technical parameters: 14 digital input/output port RX and TX, D2 ~ D13 8 analog input port A0 ~ A7 1 pair of TTL level serial port transceiver port RX / TX 6 PWM port, D3, D5, D6, D9, D10, D11 Using Atmel Atmega328P - AU microcontroller Support serial download Support for external 5 V ~ 12 V dc power supply Support 9v battery powered 16 MHZ clock frequency Size: 33.3 x 18 mm Package included: 1 x Pro Mini ATMEGA328P 5V/16M Improved Version Module

Specification: Microcontroller Atmel ATmega328 Operating Voltage (logic level): 5V Input Voltage (recommended): 7V ~ 12V Input Voltage (limits): 6V ~ 20 V Digital I/O Pins: 14 (of which 6 provide PWM output) Analog Input Pins: 8 DC Current per I/O Pin: 40mA Flash Memory: 32KB (ATmega328) (of which 2 KB used by bootloader) SRAM: 2KB (ATmega328) EEPROM: 1KB (ATmega328) Clock Speed: 16MHz Note: This version is not included the USB cable. Had change the USB chip, improve the download speed and stability of WIN7/WIN8 Package included: 1 x Arduino Compatible Improved Version Nano V3.0

Original Banana Pi G1 Open Debugger Board Burner ModuleIntroduction: Open Debugger is a set of programming tools in the development of STM series of microcontrollers, TI CC1x, 2x, TI CC3x series SOC, when STC Series MCU can be programmed quickly and easily debug, debugging programmer does not have to do something different series of chips switching plug tedious work.It is also one of USB2.0 HUB, making it easy to extend to other USB tools.With it, no longer need to face a bunch of different writer, complicated mess of wiring, USB port deficiencies. Operating Condition: Operating voltage: DC 5VOperating temperature: 0°C to 85°CThe onboard voltage output: 3.3 VMaximum output current: 2000 mASupported operating systems:Microsoft Windows 2000Windows XP SP2/SP3 operating system (32-bit versions)Windows Vista operating system (32 and 64 bit)Windows 7 operating system (32 and 64 bit)Windows 8 operating system (32 and 64 bit) Support Objects: a)CC Debugger Interface: Programming and debugging of the following 8051-based TI SoCs: CC1110, CC1111 CC2430, CC2431 CC2510, CC2511 CC2530, CC2531, CC2533 CC2540, CC2541 CC2543, CC2544, CC2545Control the same apparatus to SmartRF Studio. In addition, you can also control the following transceiver SmartRF: CC1120, CC1121, CC1125, CC1175 CC1100, CC1101, CC110L, CC113L, CC115L CC2500, CC2520It can also be used to program the PurePath wireless devices: CC8520, CC8521 CC8530, CC8531 b)SWD Interface: Programming and debugging mainstream ARM7 9 11, Cortex-A5 A8 A9 M0 M1 M3 M4Supported MCU manufacturers:ST, Freecale, Nuvoton, NXP, TI, Cypress, Atmel, Analog, Fujitsu, Toshiba, Energy Micro...Speeds up the programming and debugging functions 4Mhz: Write Flash Rom, EEPROM, ARF, and support for full speed, stepping, breakpoints c)JTAG Interface: JTAG programming and debugging interface for all supported kernel. d)UART Interface: STC series microcontroller programming and debugging output port for printing information. Package included: 1 x Original Banana Pi G1 Open Debugger Acronym table CSn Chip Select (active low) DC Debug Clock DD Debug Data RST Debug Reset DUT Device Under Test GND Ground LED Light Emitting Diode MISO Master In Slave Out MOSI Master Out Slave In RF Radio Frequency SCLK Serial Clock SoC System-on-Chip SPI Serial Peripheral Interface USB Universal Serial Bus Target Positive voltage on target CLK SWD Clock DIO SWD DATA Input/Output TMS JTAG Test Mode Select TCK JTAG Test Clock Input TDO JTAG Test Data Output TDI JTAG Test Data Input SRST JTAG Test Reset Input, Active Low RXD USB Serial Input TXD USB Serial Output

Specification: Microcontroller Atmel ATmega328 Operating Voltage (logic level): 5V Input Voltage (recommended): 7V ~ 12V Input Voltage (limits): 6V ~ 20 V Digital I/O Pins: 14 (of which 6 provide PWM output) Analog Input Pins: 8 DC Current per I/O Pin: 40mA Flash Memory: 32KB (ATmega328) (of which 2 KB used by bootloader) SRAM: 2KB (ATmega328) EEPROM: 1KB (ATmega328) Clock Speed: 16MHz Note: Improved USB chip for speed and stability using WIN7/WIN8. This version comes with the pin headers unsoldered and not included the USB cable. Package included: 5 x No welding Arduino Compatible Nano V3.0 Board

NANO IO Shield Expansion Board + Nano V3 Improved Version No Cable For Arduino Description: NANO IO Shield Expansion Board This is a small simple arduino Nano extension board, it will be the Nano all pins of derivation, convenient connection and we do the experiment ATmega328P Nano V3 Improved Version Microcontroller Atmel ATmega328 Operating Voltage (logic level): 5V Input Voltage (recommended): 7V ~ 12V Input Voltage (limits): 6V ~ 20 V Digital I/O Pins: 14 (of which 6 provide PWM output) Analog Input Pins: 8 DC Current per I/O Pin: 40mA Flash Memory: 32KB (ATmega328) (of which 2 KB used by bootloader) SRAM: 2KB (ATmega328) EEPROM: 1KB (ATmega328) Clock Speed: 16MHz Note: This version is not included the USB cable. Had change the USB chip, improve the download speed and stability of WIN7/WIN8 Package included: 1 x Arduino Compatible Improved Version Nano V3.0 1 x NANO IO Shield Expansion Board

iduino Mini Pro is a micro controller circuit board. It has 14 digital I/O; 8 analog input; 16 MHZ resonator; 8 analog input ports A0 ~ A7; PWM port; D3; D5;D6; D9; D10; D11; uses Atmel Atmega328P - AU microcontroller; External 3.3 V ~ 12 V dc power supply; Support 9v batteries; Size: 33.3 x 18.0mm.

Funduino Nano Expansion Board + ATmega328P Nano V3 Improved Version For Arduino Description: Funduino Nano Expansion Board This Nano Mult-Function expansion board is designed specially for Arduino Nano, solve the problem of wiring confusing when a variety of sensors connected. Lead out all digital IO port and analog IO port, each one with standard positive and negative power interface. Lead out the I2C interface of mainboard for convenient connection. Increasing the DC power supply interface. Nano USB interface supply current is actually only 50MA, to bring high-current devices, such as the steering, is obviously insufficient. So in the DC power connector provide external power supply to ensure the stability of equipment operation. ATmega328P Nano V3 Improved Version Microcontroller Atmel ATmega328 Operating Voltage (logic level): 5V Input Voltage (recommended): 7V ~ 12V Input Voltage (limits): 6V ~ 20 V Digital I/O Pins: 14 (of which 6 provide PWM output) Analog Input Pins: 8 DC Current per I/O Pin: 40mA Flash Memory: 32KB (ATmega328) (of which 2 KB used by bootloader) SRAM: 2KB (ATmega328) EEPROM: 1KB (ATmega328) Clock Speed: 16MHz Note: This version is not included the USB cable. Had change the USB chip, improve the download speed and stability of WIN7/WIN8 Package included: 1 x Funduino Nano Expansion Board 1 x Arduino Compatible Improved Version Nano V3.0  

FAST AFFORDABLE COURIER SHIPPING TO SOUTH AFRICA UNO Expansion Board + ATmega328P Nano V3 Improved Version With USB For Arduino Description: UNO Expansion Board The extension board specifically for the arduino NANO, welding on two rows of pins, can be used in the arduino duemilanove 2009, UNO R1 ATmega328P Nano V3 Improved Version Change the USB chip, improve the download speed and stability of WIN7/WIN8 Note: Need to install CH341SER driver, here is the link: https://wch.cn/download/CH341SER_ZIP.html Microcontroller Atmel ATmega328 Operating Voltage (logic level): 5V Input Voltage (recommended): 7V ~ 12V Input Voltage (limits): 6V ~ 20 V Digital I/O Pins: 14 (of which 6 provide PWM output) Analog Input Pins: 8 DC Current per I/O Pin: 40mA Flash Memory: 32KB (ATmega328) (of which 2 KB used by bootloader) SRAM: 2KB (ATmega328) EEPROM: 1KB (ATmega328) Clock Speed: 16MHz Package included: 1 x 328P Multifunction Expansion Board V3.0 1 x Arduino Compatible Improved Version Nano V3.0 with USB cable UNO Expansion Board + ATmega328P Nano V3 Improved Version With USB For Arduino UNO Expansion Board + ATmega328P Nano V3 Improved Version With USB For Arduino UNO Expansion Board + ATmega328P Nano V3 Improved Version With USB For Arduino

Description Beetle - The Smallest Arduino Beetle is the smallest Arduino Leonardo board. It derives its core notion from minimalism without compromising functionality. It comes with Atmel AtMega32u4 with @16MHz clock time and has expanded amounts of interfaces: 10 digital pins, 5 analog pins and 4 pwn pins. To further make it user-friendly, it is compatible with Micro USB so that direct programming and testing is no longer a headache. Select "Arduino Leonardo (tools >board > Arduino Leonardo in Arduino IDE), the ATmega32U4 comes preburned with a bootloader that allows you to upload any new code that is applicable to Arduino Leonardo. As the smallest Arduino Leonardo, it enjoys similar powerful functionalities. Beetle aims to solve problems of low-cost controller, ease-of-using properly, and to provide a low cost solution for disposable projects, such as DIY projects, workshops, gift projects, E-Textiles and educational. For students and makers who can not afford too much on hardware purchasing, Beetle can be a great solution for them. Quick Spec Microcontroller: ATmega32u4 Clock Speed: 16 MHz Operating Voltage: 5V DC Digital I/O Pins: 10 PWM Channels: 4 Analog Input Channels: 5 UART: 1 I2C: 1 Micro USB: 1 Power Ports: 2 Flash Memory: 32 KB of which 4KB used by bootloader SRAM: 2.5 KB EEPROM: 1 KB Resources Product Page Product Wiki Schematic ATmega16U4-32U4 Datasheet Shipping List 1 x Beetle - The Smallest Arduino More Products View More Products