Ammunition

UN0301 Ammunition, tear-producing with burster, expelling charge or propelling charge (1.4G) Hazchem Placard Hazchem Placards: Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) ¿ These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

UN0009 Incendiary Ammunition Hazchem Placard Hazchem Placards: Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) ¿ These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

UN0306 Tracers For Ammunition (1.4G) Hazchem Placard Hazchem Placards: Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) ¿ These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

UN0016 Ammunition (1.3G) Hazchem Placard Hazchem Placards: Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) ¿ These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

UN0247 Ammunition, incendiary liquid or gel, with burster, expelling charge or propelling charge Hazchem Placard Hazchem Placards: Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) ¿ These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

UN0018 Ammunition, Tear Gas (1.2G) Hazchem Placard Hazchem Placards: Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) ¿ These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

UN2016 Ammunition, toxic, non-explosive, without burster or expelling charge, non-fuzed, Toxic (6), Hazchem Placard Hazchem Placards: Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) ¿ These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

UN0244 Ammunition, incendiary, white phosphorus, with burster, expelling charge or propelling charge Hazchem Placard Hazchem Placards: Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) ¿ These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

UN0488 Ammunition, Practice (1.3G) Hazchem Placard Hazchem Placards: Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) ¿ These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

UN0254 Ammunition, illuminating with or without burster, expelling charge or propelling charge Hazchem Placard Hazchem Placards: Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) ¿ These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

UN0362 Ammunition, Practice (1.4G) Hazchem Placard Hazchem Placards: Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) ¿ These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

UN0246 Ammunition smoke, white phosphorus with burster, expelling charge, or propelling charge Hazchem Placard Hazchem Placards: Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) ¿ These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

UN0021 Ammunition, Toxic (1.3K) Hazchem Placard Hazchem Placards: Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) ¿ These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

UN0300 Ammunition, incendiary with or without burster, expelling charge or propelling charge (1.4G) Hazchem Placard Hazchem Placards: Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) ¿ These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

UN0243 Ammunition, incendiary, white phosphorus, with burster, expelling charge or propelling charge Hazchem Placard Hazchem Placards: Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) ¿ These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

UN0171 Ammunition, Illuminating With Or Without Burster, Expelling Charge Or Propelling Charge Hazchem Placard Hazchem Placards: Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) ¿ These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

UN0297 Ammunition, illuminating with or without burster, expelling charge or propelling charge (1.4G) Hazchem Placard Hazchem Placards: Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) ¿ These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

UN0015 Ammunition (1.2G) Hazchem Placard Hazchem Placards: Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) ¿ These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

UN0010 Incendiary Ammunition (1.3G) Hazchem Placard Hazchem Placards: Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) ¿ These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

UN2017 Ammunition, tear-producing, non-explosive, without burster or expelling charge, non-fuzed, Toxic (6), Hazchem Placard Hazchem Placards: Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) ¿ These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

UN0366 Detonators For Ammunition (1.4S) Hazchem Placard Hazchem Placards: Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) ¿ These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

UN0073 Detonators For Ammunition Hazchem Placard Hazchem Placards: Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) ¿ These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

UN0019 Ammunition, Tear Gas (1.3G) Hazchem Placard Hazchem Placards: Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) ¿ These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

UN0212 Tracers For Ammunition Hazchem Placard Hazchem Placards: Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) ¿ These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

UN0020 Ammunition, Toxic (1.2K) Hazchem Placard Hazchem Placards: Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) ¿ These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

UN0364 Detonators For Ammunition (1.2B) Hazchem Placard Hazchem Placards: Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) ¿ These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

UN0365 Detonators For Ammunition (1.4B) Hazchem Placard Hazchem Placards: Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) ¿ These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

UN0363 Ammunition, Proof (1.4G) Hazchem Placard Hazchem Placards: Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) ¿ These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

UN0245 Ammunition smoke, white phosphorus with burster,expelling charge, or propelling charge Hazchem Placard Hazchem Placards: Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) ¿ These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.