Alpen rotary burr

Buy Alpen Tc Rotary Burr 12mm Arc Pointed Nose For Hard Metals for R796.95

Buy Alpen Tc Rotary Burr 6mm Ball Nose For Hard Metals for R499.68

Buy Alpen Tc Rotary Burr 6mm Arc Pointed Nose For Hard Metals for R352.00

Buy ALPEN TC ROTARY BURR 10MM BALL NOSE FOR HARD METALS for R535.91

Buy Alpen Tc Rotary Burr 6mm Arc Round Nose For Hard Metals for R352.00

Buy Alpen Tc Rotary Burr 10mm Arc Round Nose For Hard Metals for R517.00

Buy Alpen Tc Rotary Burr 6mm Conical Pointed Nose For Hard Metals for R328.90

Buy Rotary Burr Tungsten 6X18X6Mm Cyl.W/Bottom Cutter for R152.00

Buy Rotary Burr Tungsten 6X18X6Mm Conical Straight for R114.00

Buy ROTARY BURR TUNGSTEN 6X18X6MM CONICAL STRAIGHT for R102.04

Buy Rotary Burr 1/4 Inch Shank 6 Inch Long Carbide Cutter CNC Engraving Bit For Dre for R277.33

Buy Rotary Burr Tungsten 6X18X6Mm Conical Curve for R158.00

Buy ROTARY BURR TUNGSTEN 12X25X6MM CONICAL STRAIGHT for R265.90

Buy ROTARY BURR TUNGSTEN 6X18X6MM CONICAL CURVE for R201.90

Rotary burr tungsten Rotary burr to be used with pneumatic air tools and electric die grinders. SHAPE: Arc pointed nose SHANK: Ø6mm DIA: Ø12mm CUTTING LENGTH: 25mm METAL: Tungsten carbide CUT: Double cut Application: A tungsten carbide burr can be used for: Cleaning welding seams Deburring Grinding Shaping The speed at which you use your tungsten carbide burr in your rotary tool will depend on the material you¿re using it on and the contour being drilled. It¿s safe to say - do not need to exceed 35,000 rpm. The benefits of tungsten carbide burrs: Tungsten carbide burrs can be used on many materials: All metals Stone Ceramic Porcelain Hard wood Reinforced plastics Tungsten carbide burrs are much harder than HSS (High Speed Steel) burrs and are used to cut harder materials. The burrs wear less and retain their hardness under higher temperatures. If the burrs are chipping, this could be due to the speed being too slow. It is ideal to start the burr off slow, increasing the speed as you go along. High speeds will prevent clogging in the flutes of your burrs. When using burrs, always try to keep the burr on the move. This will prevent the burr from jabbing and digging into your material causing roughness. As with all drill bits and burrs, let the burr do the work and apply little pressure otherwise the cutting edges of the flutes will chip, reducing the life of the burr.