400mm 500mm rods

Buy Silver Solder Brazing Rods 1.5 x 500mm (Bare) (1 Kg) - 30% - 1.5 x 500mm for R8,694.00

Buy 5pcs Black 4mm Diameter x 500mm Carbon Fiber Rods For Sand Table RC Airplane for R165.98

Both versatile and strong, these bronze flux-coated rods are ideal for everyday repairs of steel, cast iron and copper metals. Can also be used on galvanized iron, brass, stainless and chrome-plated materials, or any combination of them. Provides strong corrosion resistance. Intended for hard soldering, brazing and welding with a tensile strength of 50,000 to 60,000 psi. 

UN2000 Celluloid, in block, rods, rolls, sheets, tubes, etc., except scrap, Flammable Solid (4), Hazchem Placard Hazchem Placards: Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) ¿ These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

UN1333 Cerium, slabs, ingots, or rods, Flammable Solid (4), Hazchem Placard Hazchem Placards: Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) ¿ These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

UN1333 Cerium, slabs, ingots, or rods, Flammable Solid (4), Hazchem Placard Hazchem Placards: Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) — typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) — These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) — typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck — this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) — typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) — typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck — this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

Buy A GRADE TAURUS 7024 5mm x 400mm 5kg, STEEL and ALLOY WELDING RODS for R100.00

Buy 0-200/250/300/400/500mm Measure Scale Ruler Scribing Caliper 0.05mm Accurate Parallel L (Size 400mm) for R960.00

Scotch eyed auger drill bit Daimeter: Ø8.0mm Working length: 400mm Shank: Scotch eyed Application: A scotch eyed auger drill bit is used to bore holes in timber for hand operation where there is no electrical power. It is great for drilling holes in thatch poles to insert threaded rods. A branch or dowel is inserted in the eye of the auger to become the handle to turn the auger drill bit by hand. The handle is not supplied. The pilot guide is threaded to "pull" the drill bit into the wood. The cutting edge forms part of the auger helix to assist the drill bit with the removal of shavings.

Scotch eyed auger drill bit Daimeter: Ø16.0mm Working length: 400mm Shank: Scotch eyed Application: A scotch eyed auger drill bit is used to bore holes in timber for hand operation where there is no electrical power. It is great for drilling holes in thatch poles to insert threaded rods. A branch or dowel is inserted in the eye of the auger to become the handle to turn the auger drill bit by hand. The handle is not supplied. The pilot guide is threaded to "pull" the drill bit into the wood. The cutting edge forms part of the auger helix to assist the drill bit with the removal of shavings.

Scotch eyed auger drill bit Daimeter: Ø10.0mm Working length: 400mm Shank: Scotch eyed Application: A scotch eyed auger drill bit is used to bore holes in timber for hand operation where there is no electrical power. It is great for drilling holes in thatch poles to insert threaded rods. A branch or dowel is inserted in the eye of the auger to become the handle to turn the auger drill bit by hand. The handle is not supplied. The pilot guide is threaded to "pull" the drill bit into the wood. The cutting edge forms part of the auger helix to assist the drill bit with the removal of shavings.

Scotch eyed auger drill bit Daimeter: Ø19.0mm Working length: 400mm Shank: Scotch eyed Application: A scotch eyed auger drill bit is used to bore holes in timber for hand operation where there is no electrical power. It is great for drilling holes in thatch poles to insert threaded rods. A branch or dowel is inserted in the eye of the auger to become the handle to turn the auger drill bit by hand. The handle is not supplied. The pilot guide is threaded to "pull" the drill bit into the wood. The cutting edge forms part of the auger helix to assist the drill bit with the removal of shavings.

Scotch eyed auger drill bit Daimeter: Ø14.0mm Working length: 400mm Shank: Scotch eyed Application: A scotch eyed auger drill bit is used to bore holes in timber for hand operation where there is no electrical power. It is great for drilling holes in thatch poles to insert threaded rods. A branch or dowel is inserted in the eye of the auger to become the handle to turn the auger drill bit by hand. The handle is not supplied. The pilot guide is threaded to "pull" the drill bit into the wood. The cutting edge forms part of the auger helix to assist the drill bit with the removal of shavings.

Scotch eyed auger drill bit Daimeter: Ø22.0mm Working length: 400mm Shank: Scotch eyed Application: A scotch eyed auger drill bit is used to bore holes in timber for hand operation where there is no electrical power. It is great for drilling holes in thatch poles to insert threaded rods. A branch or dowel is inserted in the eye of the auger to become the handle to turn the auger drill bit by hand. The handle is not supplied. The pilot guide is threaded to 'pull' the drill bit into the wood. The cutting edge forms part of the auger helix to assist the drill bit with the removal of shavings.

Machifit T6 Lead Screw 1mm Pitch with Brass Nut 100/150/200/250/300/400/500mm L Package weight: 0.05 kg Description: 7 sizes of T6 lead screw for choosing, T6 stainless steel lead screw with copper nut, easy to install and convenient to use. Specifications: Material: Stainless steel lead screw, copper nut Screw diameter: 6mm Screw spacing: 1mm Lead of thread: 6mm Length: 100mm / 150mm / 200mm / 250mm / 300mm / 400mm / 500mm Each rod comes with one brass nut Quantity: 1pc Feature: Nut turn an around move 6mm. Mainly use for Stepping motor driving guide rail. T shape design, make of high quality stainless steel material. Easy to install and convenient to use. Package Included: 1x lead screw 1x Brass Nut Note: The color may have different as the difference display, pls understand. More Details: Click here for more deals Machifit T6 Lead Screw 1mm Pitch with Brass Nut 100/150/200/250/300/400/500mm L Machifit T6 Lead Screw 1mm Pitch with Brass Nut 100/150/200/250/300/400/500mm L