30a skyking solar auto

Buy 30A SKYKING SOLAR CHARGE CONTROLER....AUTO VOLTAGE SELECTOR....FULL 4 PHASE....LOW SHIPPING COST !! for R195.00

Buy 20A SKYKING SOLAR CHARGE CONTROLER....AUTO VOLTAGE SELECTOR....FULL 4 PHASE....LOW SHIPPING COST !! for R190.00

Buy Upgraded 30A 12V/24V Auto Volt/Amp/Temp Display PWM Solar Panel Charge Controll for R624.12

Features: 1. Build-in industrial micro controller. 2. One-key setting,LCD display,auto memory function. 3. Fully 3-stage PWM charge management. 4. Build-in short-circuit protections,open-circuit protections,reverse protections,over-load protections. 5. Dual MOS Reverse current protections,low heat productions. Parameters: 1. Color:Black 2. Size:App 150*78*35mm 3. Rated Voltage: 12V 24V Auto 4. Current: 10A, 20A, 30A 5. Standby current: 6. USB Output Voltage:5V/3A 7. Operating temperature:-35~+60￢ﾄﾃ 8. Application:Camping/Hiking 9. With Timer and light sensor,it could work for solar light system. Safety instruction: 1. Make sure your battery has enough voltage for the controller to recognize the battery type before first installation. 2. The battery cable should be as short as possible to minimize loss. 3. The regulator is only suitable for Lead Acid Batteries: OPEN,AGM, GEL. It is not suited for Nickel Metal Hydride, Lithium Ions or Other Batteries. 4. The charge regulator is only suitable for regulating solar modules. Never connect another charging source to the charge regulator. Connection: 1. Connect the battery to the charge regulator - plus and minus.it will show 1,if it detects 12V battery, 2 if it detects 24V battery. 2. Connect the photovoltaic module to the regulator - plus and minus. 3. Connect the consumer to the charge regulator - plus and minus. The reverse order applies when deinstalling! An improper sequence order can damage the controller! Note: Only For off-Grid PV Solar System. For 10A 12V Pv System: 120W Solar Panel,12V Lead-acid Battery,21V for Max input Voltage For 10A 24V Pv System: 240W Solar Panel,24V Lead-acid Battery,42V for Max input Voltage Here is the manual (← click here)for your reference. The more info you can refer (click →) here to know. Package included: 1 x Solar panels Battery Charge Controller

                                                          Why you should consider buying a MICROCARE product: Proudly South African with 20 years of manufacturing with many units having been sold locally and internationally. Service and repair of the products at a minimum cost due to local manufacture.  30amp SOLAR LED MPPT Regulator with Auto plus Load Shed ( 12-24v)           Overview:   The MICROCARE MPPT REGULATOR is designed to interface between the SOLAR PANEL, the BATTERIES and the LOAD. This  TRACKER will always find the optimum power point of the solar panel system to ensure that maximum power is extracted from the solar panel and put into the batteries. Using this system up to 30% more power can be extracted from the solar panel  than using shunt or series pass regulators. This  MICROCARE MPPT REGULATOR is also able to charge batteries of a lower voltage than the solar panel. By means of LEDS it will show the status of the system. It also incorporates various charge modes which will automatically increase the charge level to the batteries when first starting up or if the battery voltage falls below the minimum volts. This MICROCARE MPPT REGULATOR will read the nominal battery voltage. This unit is designed to run on a 12/24 volt battery set. It will then read the solar panel voltage and automatically find the optimum power point. The charging, battery values and boost modes are then automatically adjusted. Via links the load voltage disconnect can be selected, whether the battery is lead acid or sealed, and whether the unit operates as a normal load shedder or as a day/night switch.   Features:   Automatically measures the battery voltage and then sets up the charge parameters (12v-24v). Operates the Solar Panels at the maximum efficiency. Charges batteries by setting up the best power point of the solar panels. Can improve power extracted from the solar panels by 30% over normal shunt/series pass regulators. LED Display gives status notification. Charges batteries by setting up the best power point of the  solar panels. Temperature controlled Cooling Fan. Selectable low voltage disconnect (12v system - 10v, 10,7v, 11,5v and 24v system 20.0v, 21,4v, 23.0v).  24 hour load or Day/Night mode (Programmable: Dusk to Dawn - 1/2 hour, 1 hour or 1,5 hour delays). Protection system: Lighting protection, reverse polarity panel/battery, internal fuse. Maximum Current 30 Amps. 30 amp Load controller.           Order Lead Time: From receipt of your payment approx 5 - 7 working days before order will be ready for shipping.      For other related SOLAR items you can use the link below, listed under category Electronics, sub-category Other electronics.   CLICK BELOW         

Features: Intelligent and multifunctional solar charge controller. Visual LCD graphic symbol for convenient operation. Controlling parameters can be reset flexibly to satisfy your needs. Intelligent PWM charging mode. Auto temperature compensation. Settable working modes of loads. Accumulative function of charging & discharging AH. Protection from overloading and short-circuit. Battery under-voltage, back discharge, reversed protection. Delayed auto restart after overloading protection. Easy to set up and operate. Specifications: Color: Black Rated Voltage: 12V / 24V Rated Current: 30A voltage of solar panels: ≤50V float charging voltage(settable): 13.8V/27.6V low voltage protection(settable): 10.7V/21.4V low voltage recovery(settable): 12.5V/25.0V No Load Loss: ≤30mA Loop Voltage Drop: ≤170mV Charging Mode: PWM mode Temperature Compensation: -4mV / Cell / ℃ Installable maximum cable: ≤ 7# AWG (16mm²) Operating Temperature: -10~60 ℃ Storage Temperature: -30~70 ℃ Humidity Requirements: ≤90%, no condensation Mounting Hole Spacing: 60 mm×178 mm --Φ5 Item size: 18.7 * 9 * 5cm / 7.4 * 3.5 * 2in Item weight: 359g / 12.7oz Package size: 21 * 10.1 * 6.8cm / 8.3 * 4 * 2.7in Package weight: 434g / 15.3oz Pacakge Included: 1 * Solar charge controller 1 * Thermal sensor 1 * User's manual

Features: Intelligent and multifunctional solar charge controller. Visual LCD graphic symbol for convenient operation. Controlling parameters can be reset flexibly to satisfy your needs. Intelligent PWM charging mode. Auto temperature compensation. Settable working modes of loads. Accumulative function of charging & discharging AH. Protection from overloading and short-circuit. Battery under-voltage, back discharge, reversed protection. Delayed auto restart after overloading protection. Easy to set up and operate. Specifications: Color: Black Rated Voltage: 12V / 24V Rated Current: 30A voltage of solar panels: ≤50V float charging voltage(settable): 13.8V/27.6V low voltage protection(settable): 10.7V/21.4V low voltage recovery(settable): 12.5V/25.0V No Load Loss: ≤30mA Loop Voltage Drop: ≤170mV Charging Mode: PWM mode Temperature Compensation: -4mV / Cell / ℃ Installable maximum cable: ≤ 7# AWG (16mm²) Operating Temperature: -10~60 ℃ Storage Temperature: -30~70 ℃ Humidity Requirements: ≤90%, no condensation Mounting Hole Spacing: 60 mm×178 mm --Φ5 Item size: 18.7 * 9 * 5cm / 7.4 * 3.5 * 2in Item weight: 359g / 12.7oz Package size: 21 * 10.1 * 6.8cm / 8.3 * 4 * 2.7in Package weight: 434g / 15.3oz Pacage Included: 1 * Solar charge controller 1 * Thermal sensor 1 * User's manual

Features: Advanced maximum power point tracking (MPPT) technology, with efficiency no less than 99.5%. High quality components, perfecting system performance, with maximum conversion efficiency of 98%. Ultra-fast tracking speed and guaranteed tracking efficiency. Accurately recognizing and tracking of multiple power points. Reliable automatic limit function of maximum PV input power, ensuring no overload under any circumstance. Wide MPP operating voltage range. 12/24VDC automatically identifying system voltage. LCD panel display design, dynamically displaying tool’s operating data and working condition. Multiple load control modes: manual control, light ON/OFF, light on + timer and test mode. Support 3 charging preprogram options: Sealed, Gel, Flooded. Battery temperature compensation function. Real-time energy statistics function. With RS-485 communication bus interface and Modbus communication protocol, it is available to meet various communication requirements in different situations. Available for PC monitoring and external display unit connecting like MT50 and so on, realizing real-time data checking and parameters setting. Support software upgrade. Specification: Power: 40A, 30A, 20A 40A: Size: Approx. 24.9x17.9x15.6cm/ 9.80x7.05x6.14" Nominal system voltage: 12/24V auto work Rated charge current: 40A Rated discharge current: 40A Battery input voltage range: 8V~32V Max. PV input power: 520W(12V); 1040W(24V) Self-consumption: ≤20mA (12V); ≤16mA (24V) Discharge circuit voltage drop: ≤0.18V Temperature compensation coefficient: -3mV/ ºC/2V(Default) Grounding: Common positive 30A: Size: Approx. 22.5x16.3x5.1cm/ 8.86x6.42x2.01" Nominal system voltage: 12/24V auto work Rated charge current: 30A Rated discharge current: 30A Battery input voltage range: 8V~32V Max. PV input power: 390W(12V); 780W(24V) Self-consumption: ≤20mA (12V); ≤16mA (24V) Discharge circuit voltage drop: ≤0.18V Temperature compensation coefficient: -3mV/ ºC/2V(Default) Grounding: Common positive 20A: Size: Approx. 21.6x15.4x4.5cm/ 8.50x6.06x1.77" Nominal system voltage: 12/24V auto work Rated charge current: 20A Rated discharge current: 20A Battery input voltage range: 8V~32V Max. PV input power: 260W(12V); 520W(24V) Self-consumption: ≤20mA (12V); ≤16mA (24V) Discharge circuit voltage drop: ≤0.18V Temperature compensation coefficient: -3mV/ ºC/2V(Default) Grounding: Common positive Environmental: LCD temperature range: -20￢ﾄﾃ to +70￢ﾄﾃ Working environment temperature range: -25￢ﾄﾃ to +45￢ﾄﾃ Storage temperature range: -35￢ﾄﾃ to +80￢ﾄﾃ Humidity range: ≤95% (N.C) Enclosure: IP30 Package includeds: 1 x MPPT Solar Charge Controller Regulator 1 x English Use Manual Details pictures: