300w 600w

300w DIK POWER INVERTER - DC TO AC   Surge Power 600w DC 12/24V AC 110/220V Output Frequency 60Hz/50Hz Aluminum enclosure Connecting cables included Length of wires 0.5m Audio alarm warns of low battery level prior to auto shut down.  Safety Shuts down if over temperature or overload condition.                                  

Designed for the fixed installation market, the high performance T Series features MC² Audio’s complementary Class AB bipolar topology and the unique MC² Audio current driven floating drive stage. Conventional analogue level controls help deliver the cleanest sound available coupled with ultra-high standards of reliability. The T Series’ proprietary control and protection circuitry continuously checks for fault conditions including shorted outputs, DC on outputs, excessive temperature, and component failure. If such an event occurs the outputs are disconnected, saving expensive driver repair bills. Sophisticated 'side chain' limiters prevent distortion and speaker damage but are out-of-circuit until the onset of clipping. The control circuitry provides full protection against inrush current limiting with delayed 'turn on'. Low noise vari-speed fans are utilized to minimize mechanical noise, making the T Series an ideal choice for live theatre. Optional internal crossover cards available. Specifications: Number of Channels:      4 Output Power: (per channel)  *C&D only 8ohms      160W    4 ohms     300W   2 ohms     475W* Output Power: (bridged) *C&D only 8 ohms 600W        4 ohms 950W*   THD%: (@1dB below max output) @ 1kHz  20Hz to 20kHz Gain /Sensitivity Gain 32dB Sensitivity (for max power) +2.0 dBu  (1.0V) Frequency Response:  20Hz to 20kHz (+ 0/- 0.5dB) Power Consumption: Nominal @ 240v into 4 ohms   1.5A Nominal @ 120v into 4 ohms   3.0A Dimensions: (2U) (mm) Amplifier   88(h) x 482(w) x 428(d) Weight: 14.9kgs 1 year limited guarantee For more info on this product please click here

Features: AUX audio signal input Line signal output Right channel speaker output Left channel speaker output DC 12V /5A input FM antenna The AC power input AC220V-240V/50Hz-60Hz Built-in wireless Bluetooth Speaker impedance: 4-16Ω SNR(Signal/Noise Ratio): -89dBn Input power: 12V/DC5A AC220V-240V Input impedance: 47KΩ Output power max: 300W R.M.S.40W Frequency: 20Hz-20KHz Input sensity: 0.25mV-220mV Packaged Included: 1 x Teli BT-1228 Amplifier 1 x Remote Control 1 x RCA Cable 1 x User Manual

 8 Mono Mic/Line Channels (XLR, ¼” Jack – Balanced)  2 Stereo Line Ch’s   Low (80Hz), Mid (2.5KHz)  Hi (15KHz) EQ pots (+/-15 dB)   Level, EFX, Aux Send, Compression & Pan Pots   16 Digital EFX Processor   MP3-USB / SD Card Media Player with Record Function  2 x 300W RMS @ 4Ω (Speakon & 1/4″ Jack)

8 Mono Mic/Line Channels (XLR, ¼” Jack – Balanced)  2 Stereo Line Ch’s  Low (80Hz), Mid (2.5KHz) & Hi (15KHz) EQ pots (+/-15 dB)  Level, EFX, Aux Send, Compression & Pan Pots  16 Digital EFX Processor  MP3-USB / SD Card Media Player with Record Function  2 x 300W Rms @ 4Ω (Speakon & 1/4″ Jack)

Performance you can depend onThe newest addition and most compact in its range, the Delta 10 provides the same quality and durability as its larger counterparts, with an equality competitive power and SPL handling. Featuring a 1.75 voice coil combined with a 10 low distortion cast frame woofer, the loudspeaker generates 340 watts RMS of power while the 90 x 60 waveguides ensure a long-throw projection.300W RMS65Hz 20kHz Frequency Response128dB Max SPL10 low distortion cast frame woofer1.75 titanium compression driver2 x Parellel Speakon InputsRhino Rock textured black paint finishPlywood constructionSteel grille2 x 4-way high impact plastic handles9 x m10 rigging points for flown applicationsSPECIFICATIONSConfiguration 2-WayFrequency Response (+/- 3dB) 65Hz - 20KHzPower (RMS / Program / Peak) 300W / 600W / 1200WImpedance 8OhmMax SPL 128dBLow Frequency Transducer 10'High Frequency Transducer 1.75' Titanium Compression DriverNominal Coverage 90 x 60Waveguide Type EllipticalInput 2 x SpeakonNet Weight 16.58kg / 36.5lbsGross Weight 19.5kg / 43lbsDimensions (H x W x D) 500mm x 338/212.4mm x 330.(020)

Mitus 206LA Mitus 206L MITUS Series is also available in white colour Precision coverage vertical active array 600W + 300W RMS - 134dB SPL 2 x 165 mm (6.5) B&C neodymium woofers with 44 mm (1.7) coil 36 mm (1.4) exit B&C neodymium driver with 64 mm (2.5) coil Frequency response from 68Hz to 20kHz Latest class D built-in amplifiers, 600W RMS to the LF and 300W RMS to the HF with switch mode power supply DSP on-board with 8 EQ presets, +/- 5db HF level control for accurate amplitude shading Control panel with XLR input and link, volume, presets, HF level, HP-fi lter, ground-lift 100 horizontal waveguide with very low distortion and near fl at wavefront up to 18Khz High impact polypropylene gas-injected enclosure with integrated rigging hardware adjustable with 0 to 10 angle between cabinets at 2 step Ideal for small to medium sized application, from single pole mounted loudspeakers with 100H x 10V coverage to multiple cabinet full sized line array, the MITUS 206LA may be used also in outdoor applications where the system is not directly exposed to the elements Wide range of hardware accessories for flying and ground stacked configurations Very lightweight, only 14Kg / 30.8Lb

A 12" speaker in a strong ABS cabinet featuring a high quality 600W amplifier for excellent sound reproduction and a tremendous performance. Comes with a powerful mid-low woofer and a high compression dynamic horndriver. The line output allows daisy chaining of additional speakers. The durable impact resistant moulded light weight enclosure is complemented with a tough metal grille that protects the woofer. This active speaker can be used standalone and is ideal for use in bars, restaurants, small theatres and halls, fitness and conference rooms and on stages. Built-in 600W amplifier with crossover 12" Extremely powerful mid-low woofer Line and mic input with bass & treble controls Wide dispersion horn Tophat 35mm Peak power 600W Output power 300W Frequency response 50Hz - 19kHz SPL max 122dB Woofer 12" Top hat Yes Dimensions 295 x 375 x 585mm Weight 12kg

ProMaxX Speaker Series maintains some of the winning attributes of the FBTMaxX Series, incorporates the latest technological achievements designed by FBTs R&D team, and guarantees quality of construction, utmost reliability, extreme portability and unbelievable sound fidelity. ProMaxX 14a Processed Active Speaker 600W + 300W - dB SPL 355 mm (14) LF neodymium magnet woofer with 76 mm (3) voice coil, custom made for FBT by B&C 36 mm (1.4) exit throat HF driver with 64 mm (2.5) voice coil Frequency response from 45Hz to 20 kHz ProMaxX 14a uses the same size gas-injected polypropylene molded enclosure as the ProMaxX 12a, but features a New 14 LF Woofer for lower frequency response Extremely light, only 17.4 Kg / 38.3 Lb

A dual angle floor wedge fitted with a top hat enabling it to be used also as a pole mounted top box. Using this option for main PA as well as floor wedges gives the whole system the same sound signature greatly reducing EQ problems hence simplifying the set-up for bands with no dedicated sound engineer. The enclosure is made from premium Russian ply with custom drive units which give a wide bandwidth and an exceptionally smooth response, making it ideal for the demands of today’s modern programme material. Industry standard flying points are fitted as standard for ease of installation and integration into multiple arrays. Its computer-aided design ensures accurate tuning of enclosures for maximum output and tailored bottom response. Great attention has also been given to panel bracing to reduce resonances so increasing sonic definition and authority. Features: Durable textured black paint finish 12 x M10 hanging points Powerful low frequency, rich elasticity, crisp vocal penetration Coated steel grille lined with special material to prevent ingress of foreign particles for maximum protection Speakon® plugs fitted for reliability and maximum power transfer from the amplifier Top hat fitted for maximum versatility in mixing and matching enclosures All fittings rebated for easier stacking and arraying Steel bar handles fitted as standard Technical Specifications: Power rms: 300W Power max. (5 mins max.): 600W Woofer: 1 x 38cm (15") Tweeter: 4.4cm (1.75")Titanium Impedance: 8 ohms Frequency response: 50Hz - 18kHz (-3dB) Frequency response: 45Hz - 20kHz (-10dB) Dispersion: H: 90°, V: 60° SPL @ 1W/1m: 97dB SPL max: 122dB (±3dB) Dimensions: 490 x 670 x 390mm Weight: 30kg 1 year limited guarantee. For more info on this product please click here

Great value and great sound re-production The Wharfedale Professional EVP-X series loudspeaker systems are the latest evolution of our highly successful EVP-S family. Built around the development of an exceptional new Elliptical Waveguide Horn coupled with a ferrofluid cooled 44mm titanium compression driver, the high frequency performance and system reliability of this series is unprecedented in this product class. High output capability and low distortion with excellent high frequency extension characterize these new drivers. The EVP-X series loudspeakers combine exceptional design and features with outstanding sound quality to provide a choice of sound systems to suit almost any application. EVP-X" Two-way full range kHz frequency response (+/-3dB) 8 ohms system impedance Trapezoidal enclosure 2 x 1/4" jacks and 2 x Speakon™ type connector Continuous 300W /Music 600W / Peak W power handling H/D/W: 675 x 460 x 450 mm, kg

Peavey power amplifiers with 500w RMS (w program) power per channel at 4 ohms. The Peavey PV PA power amplifier is perfect for live bands, DJs, clubs, discos, schools, church halls, conference venues and installation, in a compact 2 U rack size. The PV works as a standard full range power amplifier and also features two built-in 150 Hz crossovers for subwoofers. With the crossover selected, the sub frequencies are sent to the speaker outputs to power subs and the higher frequencies are sent to the "HIGH OUT" jack sockets for connection to a separate amplifier for 2-way PA configurations. In addition, the sub 150Hz frequencies are also sent to the "THRU LOW OUT" jack sockets for connection to a second separate sub power amplifier if required. Features: Power Output: 4 ohms 500w RMS / w program per channel Power Output: 8 ohms 300w RMS / 600w program per channel Minimum parallel speaker load: 2 ohms per channel or 4 ohms bridge 4 ohms per channel minimum or higher is recommended to maintain cooler temperature for sustained operation Power Output Bridge Mode: 8 ohms w RMS / w program DDT™ COMPRESSION ++: Automatic, switchable with LED indicator COOLING SYSTEM: Two-speed DC fan, air flow back to front LOW CUT FILTER ++: -3 dB @ 40 Hz, 12 dB per octave CROSSOVER ++: 150 Hz, 4-pole Linkwitz-Riley approximation INPUTS ++: Electronic balanced; Barrier Strip, XLR, TRS mm) CROSSOVER OUTPUTS ++: Low/Thru and High, TS mm) AMPLIFIER OUTPUTS: Speakons for Chan A, Chan B and Bridge; Binding Posts LED INDICATORS ++: Red, DDT/clipping; Yellow, signal; Green, power AMP PROTECTION: Full short circuit, open circuit; over-temp thermal; RF; stable into any load LOAD PROTECTION: Turn on/off muting, DC (triac crowbar), low-cut filter DIMENSIONS: Height: 2 U rackmount 8.9 cm, Width: 48.3 cm, Depth: 38.0 cm WEIGHT: 20.5kg 1 year limited guarantee For more info on this product please click here

BSP7 Powerline Specifications: Amplifier power output power 2 X 600w @ 4 Ohms / 2 X 300w @ 8 Ohms Input connections unbalanced jack / balanced XLR Output connections 4 pole connector / unbalanced jack Minimum impedance 4 Ohms Frequency response 5Hz – 50 KHz (+/-1.5dB) S/N ratio 90dB THD 0.05% Dimensions 483 x 88 x 410mm Weight 17Kg 1 year limited guarantee For more info on this product please click here

BSP7 – POWERLINE Amplifier power output power 2 X 600w @ 4 Ohms / 2 X 300w @ 8 Ohms Input connections Balanced XLR / unbalanced jack Output connections 4 pole connector / unbalanced jack Minimum impedance 4 Ohms Frequency response 5Hz – 50 KHz (+/-1.5dB) S/N ratio 90dB THD 0.05% Dimensions 483 x 88 x 410mm Weight 17Kg

SPECIAL OFFER - While stocks last Hybrid Professtional Power Amplifiers B Series Special Offer from R3200.00 B600 - 2x 300w @ 4 OHMS R 3200.00 B900 - 2x 450w @ 4 OHMS R 3400.00 B1200mk5 - 2x 600w @ 4 OHMS R 3600.00 NXT Level Tech WWW.NXTLEVELTECH.CO.ZA

FTC25 - 25W FM RDS Transmitter = R 27,850.00 FTC300 - 300W FM RDS Transmitter = R 68,744.00 FTC600 - 600W FM RDS Transmitter = R 78,905.00 FTC1K - 1000W FM RDS Transmitter = R 86,200.00 FTC2K - 2000W FM RDS Transmitter = R 132,890.00

15" 2-way 300w RMS, 600w Program 8 ohm floor monitor Dual speakon/jack Combi

15inch2-way 300w RMS, 600w Program 8 ohm floor monitor Dual speakon/jack Combi

10? 2-way 300w RMS, 600w Program, 1200w Peak 8 ohm Bi-amp trapez. spkr, Peak SPL 128dB, 65Hz-20kHz,Die-Cast Aluminium Woofer, Dual Angle Pole Mount, 6 x Rigging Points, Plywood Construction.

A power inverter is an electronic device that converts low voltage 10-15V DC (direct current) battery power to 220 – 230V AC (alternating current) household power, especially useful during load shedding stages. Power Inverters are invaluable for powering laptops, cell phones and many other appliances. Automatic shutdown provides protection against overload, over temperature and low battery conditions. SPECIFICATIONS: * Input voltage: 12/24/48V * Output voltage: 100/110/120V or 220/230/240 * Output wave form: Modified Sine Wave Inverter * Continuous power: 300W * Surger power: 600W * Dimensions: 180mm x 105mm x 55mm * European Suco Socket * Full input and output protection * Automatic thermal shutdown * Overload protection * Extra surge capacity * Low battery alarm / shutoff * Reverse polarity protection * Built-in cooling fan * Battery cable connectors included SKU: 15943 For more information on this Product: Contact ETIENNE on 073 409 4629 (Or Whats App)

A power inverter is an electronic device that converts low voltage 10-15V DC (direct current) battery power to 220 – 230V AC (alternating current) household power, especially useful during load shedding stages. Power Inverters are invaluable for powering laptops, cell phones and many other appliances. Automatic shutdown provides protection against overload, over temperature and low battery conditions. SPECIFICATIONS: – Input voltage: 12/24/48V – Output voltage: 100/110/120V or 220/230/240 – Output wave form: Modified Sine Wave Inverter – Continuous power: 300W – Surger power: 600W – Dimensions: 180mm x 105mm x 55mm – European Suco Socket – Full input and output protection – Automatic thermal shutdown – Overload protection – Extra surge capacity – Low battery alarm / shutoff – Reverse polarity protection – Built-in cooling fan – Battery cable connectors included Items Available: 5 Stock ID: SKU: 15943 For more information on this product please contact me on: Mobile: 063 925 9920 (call or whatsapp) Email: herman@boatssa.com Website: www.boatssa.com