2pcs 5v

2Pcs 5V MAX485 TTL To RS485 Converter Module Board For Arduino Feature: Operating voltage: 5V On-board MAX485 chip A low power consumption for the RS-485 communication Slew-rate limited transceiver 5.08mm pitch 2P terminal Convenient RS-485 communication wiring All pins of chip have been lead to can be controlled through the microcontroller Board size: 44 x 14mm Package included: 2 x MAX485 TTL to RS485 module

Buy 2Pcs 5V Low Level Trigger One 1 Channel Relay Module Interface Board Shield DC for R131.87

Buy 2Pcs 5V Lithium Battery Charger Step Up Protection Board Boost Power Module Micro for R210.00

2Pcs 3V To 5V 1A USB Charger DC-DC Converter Step Up Boost Module Features: Module uses the Taiwan production boost chip, high efficiency (up to 92%), plus built-in over-current protection chip, can be more good to protect the module and use the device after the class. Module with undervoltage protection, undervoltage protection into state below 2.5V, can be more better protect the battery, to avoid excessive discharge. Module can modify the fixed resistor adjusts the output voltage can be adjusted up to 12V output, but to ensure that the output power of less than 5W. This module uses TDK multilayer ceramic capacitors as main filter capacitor, the output ripple can be as low as 20mV (5V1A output case)! This module uses a standard USB interface, you can use all universal USB charging mobile phones, MP3, MP4 and other equipment, the perfect support for IPHONE and other mobile phone. Specification: Module properties: Non-isolated step-up module (BOOST) Input voltage: 2.5-6V Output voltage: 4-12 V(Adjustable, the default 5 v) Output current: 1000mA (Max) Efficiency: 92%(Max) (the higher the input voltage, the higher the efficiency) Switching frequency: 1MHz Output ripple: 20mV (MAX) Operating temperature: Industrial (-40°c to +85°c) Voltage regulation: ±2.5% Short circuit protection: None (please use the lithium battery with protection) Input: IN + postive, IN - negative Output: USB output Size: 3 x 1.3 x 0.8 cm Application: This module can be used for DIY mobile power output, enabling single or two ordinary lithium battery to 5V boost to the mobile phone or PSP device charging. DIY a mobile power supply, only need one battery, you can output 5V voltage for your phone, MP3, MP4, PSP charger, very easy. In order to power your electronic devices when your device needs 5V power supply, when you only have lithium battery, this module can be directly step-up to 5V, solve your problems. Note: This module is a fixed 5V output module Modules indicated above IN - (negative input), IN + (positive input), OUT-(negative output), OUT + (positive output) must be connected correctly, otherwise it may cause damage to the module This module has an LED light, when the charge when the LED lights can be used as indicator Package included: 2 x USB boost module

2Pcs Laser Receiver Non-modulator Tube Sensor Module For Arduino Features: PCB size: 1.5 x 1.9cm Working voltage: 5V Output high level when receive laser signal Output low level when not receive laser signal Note: The sensor uses a non-modulated laser receiver, please use indoors where no light, sunlight or other fixtures may interfere, recommended for use in dark environments. Package included: 2 x Laser sensor module  

2Pcs Yellow Backlight 1602 Character LCD Display Module For Arduino Description: LCD display module with yellow backlight Wide viewing angle and high contrast Built-in industry standard HD44780 equivalent LCD controller Commonly used in: copiers, fax machines, laser printers, industrial test equipment, networking equipment such as routers and storage devices LCM type: Characters Can display 2-lines X 16-characters Operate with 5V DC Module dimension: 80mm x 36mm x 12mm Viewing area size: 64.5mm x 16mm Package included: 2 X LCD display module

2Pcs IC2272 315MHz 4 Channel Wireless RF Remote Control Transmitter Receiver Module Specification: Remote control: Operating voltage: DC 12V(27A / 12V battery x 1) Operating current: 10mA at 12V Radiated power: 10mW at 12V Transmission distance: 50m - 100m (open field, the receiver sensitivity of -100dbm) Transmitting frequency: 315MHZ Modulation mode: ASK (Amplitude Modulation) Encoder types: fixed code Decoding receiver board: Operating voltage: DC 5V Receiver sensitivity is -98dB Leg 7 bits: VT, D3, D2, D1, D0, +5V and GND VT is a valid signal high output pin upon receiving a valid signal, the pin output high, may also drive the relay Size: 6.6 x 22 x 41mm Note: There are four buttons on the remote control, and respectively correspond to the four data bits to the receiving board output pin D0, D1, D2, and D3. Press the buttons transmit signals, the corresponding data bit is output high. Package included: 2 x Remote control 2 x Decoding receiver board

2Pcs 4V-40V DC-DC Step Down LM2596 Voltage Regulator Converter Module Description: Static power: 20 ma (and input voltage output voltage and digital tube color is closely related to the actual current will exist deviation) With voltage display function, the displayed accuracy is ± 0.05V, range is 0 - 40V. (Note: in order to voltage display more accurate, please ensure that the input voltage is higher than 4V) Button to switch measurement of the input or output voltage, and LED indicates the current measurement of the input or output voltage;The nixie tube can be turned off by another button.Mentioned in these states are able to be memorized, is not lost even if the power is disconnected. Continuously adjustable output voltage range of 1.25V -37V, 4-40V input voltage range. (The input voltage is at least high than the output voltage of 1.5V) High efficiency,150 kHz fixed frequency internal oscillator. Guaranteed 3A output load current. Thermal shutdown and current limit protection Specification: Parts Input voltage range: 4-40 v (40 v to limit the highest voltage) Output voltage range:1.25V - 37V (decompression mode, input output must be greater than 2 V above) Output current: 2 A continuous output Output power: the maximum 15 w Ripple frequency: 150 KHZ Grain wave peak: 100 mv IN +: input positive/IN -: input negative OUT +: output positive/OUT -: output negative Voltmeter precision: ± 5 ‰ Weight: 33g Size: 7cm x 4cm Package included: 2 X LM2596 voltage regulator converter module

2Pcs Socket Adapter Plate For 8Pin NRF24L01+ Wireless Module Feature: Quantity: 2 Voltage: 3.3V Size: 26 x 19 x 12mm It's for 8 Pin NRF24L01+ Module A simple socket board which is for NRF24L01 Wireless module on-board AMS1117-3.3 chip It could be used with NRF24L01 Wireless module Wireless module operating voltage is generally 3.3v, while the ordinary 51 micro-controller 5v, this module is wireless module with 51 single system board used in conjunction Package included: 2 x Socket Adapter

Buy 2Pcs Geekcreit 5V 4 Channel Relay Module PIC ARM DSP AVR MSP430 Blue Geekcr for R219.00

Buy 2Pcs RobotDyn CP2104 USB-TTL UART Serial Adapter Microcontroller 5V/3.3V Module Digital I/O USB-A for R240.00

Specifications: 1.OLED display, no need backlight, self-illumination, 2.The display performance is better than the traditional LCD display, also lower consumption. 3.Driver IC: SSD1306 4.Size: 0.91 inch OLED 5.Resolution: 128 x 32 6.IIC interface 7.Display Color: white 8.Pin Description: GND: Power Ground VCC: Power + (DC 3.3 ~5v) SCL: Clock Line SDA: Data Line Package included: 2 x IIC I2C Blue OLED LCD Display Module

Descriptions:   HC-020K is a high resolution, short response speed, wide voltage switch output speed measuring module, with black encoder can measure motor speed (Now provide the encoder type D, hole diameter is 4 mm. Can be used to output shaft is 4 mm motor).   Specifications:   1. Working voltage: 4.5V to 5.5 V. 2. Transmit tube pressure drop: Vf = 1.6 V 3. Transmit tube current: 20 mA 4. Signal output: A, B two way; The TTL level 5. Distinguish precision: 0.01 mm 6. Measurement frequency, 100 KHZ 7. Encoder diameter: 24 mm 8. Encoder type D hole diameter: 4 mm 9. The encoder resolution: 20 line 10. Speed measuring sensor configuration: The configuration can measures 1 road motor speed   Note: This is for RP5 tank caterpillar vehicles speed measuring module, just hit four holes in the RP5 tracked vehicle   Package included:   2 x RP5 Double Speed Measuring Module kit  

Features:    This is the high quality electronic microscope instead of the normal microscope. You can use it to snap HD pictures and capture the video, and also to measure the objects. You can use this for: Industrial Inspection, Computer Parts inspection, Telecom module inspection, scientific teaching tool, Laboratory Research, Medical analysis, School Research tool, Insect dissection examination, Plant dissection examination, Skin examination, Scalp examination, Textile Inspection, Jewelry Inspection, Collections/Coin Inspection, Printing Inspection, Reading Aid, Teacher Add as Project, Presentation and so on.   Specification:   Image CMOS Sensor. Controller: High Speed DSP Lens: Micro-Scope Lens Focus Range: Manual Focus from 3mm to 40mm Snap Shot: Software and Hardware Video Capture Resolution: 640 x 480 (0.3M Pixel) Still Image Capture Resolution: 1600 x 1200 (2M Pixel), 1280 x 960 (1.3M Pixel), 800 x 600, 640 x 480 Frame Rate: Max. 30f / s Under 600 Lux Brightness Flicker Control: 50Hz / 60Hz Option Video Format: AVI Snap Shot Format: JEPG Light Source: 8 White Light LED (with controller on USB cable) Magnification Ratio: 50X to 500X (Manual) Power Supply: USB Port (5V DC) Software: AMCAP (Driver) System Requirement: Pentium Computer with 700MHz & Above, 20M HD Space CD ROM Driver, 128MB RAM, Direct X VGA Card PC Interface: USB3.0 & USB2.0 & USB1.1 Operation System: WIN XP/VISTA, Windows 7 32/60bit,Windows 8, 10, Mac OS. Dimension: 112 mm (L) x 33 mm (R) Accessories: A1-Alloy Stand, CD ROM (Driver), Cover, emandation rule   Package includes:    2 x USB Microscope(White and Grey) 2 x Stand 2 x CD Driver Full Accessories As Following Pictures Show   Details pictures: 

Buy 12W 5.5V Tri-fold Foldable Waterproof Monocrystalline Silicon Solar Panel With 2Pcs Carabiner + USB for R1,240.00

Buy Kingever Battery R20 1.5V Size D Extra Heavy Duty Carbon Battery (2PCS / PACK) for R25.00

Features: Specially designed for PS4 Pro and PS VR Fit for 1pcs PS4 Pro, for 2pcs PS4 controllers, and for 2pcs PS Move controllers It can vertically store 1pcs PS VR data connector Built-in 2pcs high-speed and quiet fans for ventilation, and improving devices's services life Include 4 x 3.0 USB Hubs to extend for other devices 1pcs DC plug available for connection with 2A or 3A 5V adapter It can charge for 2pcs PS4 contoller and 2pcs PS Move contoller Material: ABS Plastic Size: about 380 x 143 x 30mm Fan size: 60 x 60 x 15mm Fan speed: 3000RPN Fan current: 230MA Rated input voltage: 500MA Rated input current: DC5V Note: Due to different producing batches, product details might be a little different. If you minding the difference, please buy it carefully. Please allow 1-3CM differs due to manual measurement. Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding. Package Included: 1 x Charging Dock Vertical Stand Holder

Includes DMUS  CD/MP3/SD Media Player and UH816 Handheld Wireless Microphone EP800U1 Features: Speaker 4ohm / 8" full range Receiver Module UHF PLL Single or Dual 16 users selectable channels Frequency band UHF MHz (UHF MHz) Output power Max. 100W  (Digital Amplifier System) Charging time 12V/5Ah (2pcs) Lead Acid Battery 6-8 hours (for microphone as 1.2V/1.3Ah Nickel-Hydrogen Battery as 5 hours) Operating time Averages 3-10 hours (depending on volume) Power supply V (V) switching power supply Rechargeable battery 12V/4.5Ah (2pcs) (for microphone as 1.2V/1.3 Ah) Frame material Waterproof with plastic steel (P.P. Fiber) Special design low consumption; automatic charge design for 4pcs/1.2v rechargeable batteries; storage space for 2 sets of handheld microphones and body pack transmitters; simultaneous power charging with unit operating; digital echo system; one-touch retractable handle)  Dimensions 500 (H) X 320 (W) X 290 (D)(mm) Weight (N.W) Approx. kgs DMUS Media Player Features: Reads CD/MP3/SD cards UH-816 Handheld Microphone Features: Outlood design      Handheld Microphone capsule Dynamic Carrier Frequency range MHz Frequency Stability  ± % Frequency Response 50Hz-18KHz(±3dB) Antenna Built in S/N Ratio 80dB overall RF Output Power 10mW MAX Currency Consumption  100mA ±10mA Battery  1.5V x 2(Aa x 2) Weight 230 g Please Note  Image for Illustration Purposes Only. Actual Product will Depend on Options Purchased. 1 year limited guarantee For more info on this product please click here

Includes UH816 Handheld Wireless Microphone EP800U1 Features: Speaker 4ohm / 8" full range Receiver Module UHF PLL Single or Dual 16 users selectable channels Frequency band UHF MHz (UHF MHz) Output power Max. 100W  (Digital Amplifier System) Charging time 12V/5Ah (2pcs) Lead Acid Battery 6-8 hours (for microphone as 1.2V/1.3Ah Nickel-Hydrogen Battery as 5 hours) Operating time Averages 3-10 hours (depending on volume) Power supply V (V) switching power supply Rechargeable battery 12V/4.5Ah (2pcs) (for microphone as 1.2V/1.3 Ah) Frame material Waterproof with plastic steel (P.P. Fiber) Special design low consumption; automatic charge design for 4pcs/1.2v rechargeable batteries; storage space for 2 sets of handheld microphones and body pack transmitters; simultaneous power charging with unit operating; digital echo system; one-touch retractable handle)  Dimensions 500 (H) X 320 (W) X 290 (D)(mm) Weight (N.W) Approx. kgs UH-816 Handheld Microphone Features: Outlood design      Handheld Microphone capsule Dynamic Carrier Frequency range MHz Frequency Stability  ± % Frequency Response 50Hz-18KHz(±3dB) Antenna Built in S/N Ratio 80dB overall RF Output Power 10mW MAX Currency Consumption  100mA ±10mA Battery  1.5V x 2(Aa x 2) Weight 230 g Please Note  Image for Illustration Purposes Only. Actual Product will Depend on Options Purchased. 1 year limited guarantee For more info on this product please click here

  Specifications:   * Light Source: 20pcs SMD3528 white leds, 2pcs SMD3825 Red leds, 2pcs SMD3528 bule leds. * Shell Material: Aluminum Alloy * Modes: High-Low-Strobe * Power: 30W (2400 Lumens) * Battery: 3x 18650 Batteries(battery not include) * Battery Life: 500 charge cycles * Input: 90-240V. * Output: 5v/1A,  can charge the phone & iPad and other digital products.(USB wire don`t incuding in packs). * Beam angle: The Horizontal Axis:160; The Vertical Axis:80 * Widely used in factory, gymnasium, billboards, buildings, lawns, landscaping, offices, the site of light project and decorative lighting project etc. * Excellent waterproof, suitable for outdoor environment, adverse weather conditions except for diving * It`s can use in AC 90-240V,but if you use in AC 90-240V please Remove the battery. * Three kinds of light up patterns, 1:Bright light with white  2:Weak light with wite   3:flashing light Package including: 1 x Rechargeable Flood Light 1 x Charger 1 x Screw 1 x User Manual  

  Specifications:   * Light Source: 20pcs SMD3528 white leds, 2pcs SMD3825 Red leds, 2pcs SMD3528 bule leds. * Shell Material: Aluminum Alloy * Modes: High-Low-Strobe * Power: 30W (2400 Lumens) * Battery: 3x 18650 Batteries(battery not include) * Battery Life: 500 charge cycles * Input: 90-240V. * Output: 5v/1A,  can charge the phone & iPad and other digital products.(USB wire don`t incuding in packs). * Beam angle: The Horizontal Axis:160; The Vertical Axis:80 * Widely used in factory, gymnasium, billboards, buildings, lawns, landscaping, offices, the site of light project and decorative lighting project etc. * Excellent waterproof, suitable for outdoor environment, adverse weather conditions except for diving * It`s can use in AC 90-240V,but if you use in AC 90-240V please Remove the battery. * Three kinds of light up patterns, 1:Bright light with white  2:Weak light with wite   3:flashing light Package including: 1 x Rechargeable Flood Light 1 x Charger 1 x Screw 1 x User Manual      

PIC PIC16 PIC16F877A Development Board Core-Board Kit With 13 Modules Description: The PIC development board Open16F877A is based on PIC16F877A, with rich expansion interface, support all kinds of peripheral modules. Feature: Specification of PIC16F877A: Kernel: PIC 8-bit RISC Operating Frequency: 20MHz Max Operating Voltage: 2V ~ 5.5V Encapsulation: DIP40; I / O ports: 33; Flash: 14kB RAM: 368B EEPROM: 256B Interface: 1 x MSSP (SPI/I2C), 1 x A / E / UART, 2 x PWM, 8 x ADC Debugging & Download: ICSP AMS1117-3.3: 3.3V regulator device 16-bit I/O Port: of which 8bit for AD port 8-bit I/O Port: for 8-bit keypad module, motor control module, etc SPI Port: for Dataflash AT45DBXX, SD card, MP3, etc I2C Port: for I/O expansion chip PCF8574, EEPROM AT24CXX, etc 1-WIRE Port: for DS18B20, DS2401, etc UART Port: for RS232, RS485, USB TO UART, etc PS/2 Port: for PS/2 device keyboard, mouse, etc 2.2inch color LCD Port: SPI Character LCD Port: such as LCD1602 ICSP Port 5V DC Port Package included: 1 x Open16F877A Development Board 1 x USB Cable (mini) 1 x PL2303 USB UART Board (mini) 1 x 2.2inch 320 x 240 Touch LCD (A) 1 x AD Keypad 1 x FT245 USB FIFO Board (mini)(16I/O) 1 x AT45DBXX DataFlash Board (SPI) 1 x PCF8563 RTC Board (I2C) 1 x Micro SD Storage Board (SDIO/SPI)(not includes SD card) 1 x NRF24L01 RF Board (B)(SPI) 2Pcs 1 x DS18B20 (ONE WIRE) 1 x IR Remote Control 1 x LCD1602 (3.3V Blue)(Parallel) 1 x 8 SEG LED Board (16I/O) 1 x 8 Push Buttons (8I/O)

BOYA BY-V02 Compact External Stereo Video Microphone For Canon Nikon DSLR Camera Description: BOYA BY-V02 is a stereo condenser microphone,  for use with DSLR cameras, camcorders, and audio recorders, it features cost effective is an ideal for video use. The BY-V02 measures 5.94 inch(151mm) in length and includes a dead kitten windscreen, camera hot-shoe mount, and replaceable rubber O-rings suspend the microphone on the shock mount and protect against noise due to movement and handling. The light weight and compact condenser microphone is powered with 2pcs of AAA alkaline battery (not included). The stereo 1/8 inch (3.5mm) plug is compatible with a wide variety of different cameras and audio devices.   Features:   • Stereo X/Y Condenser Microphone • Broadcast sound quality • Adjust sound attenuation (-10dB,0dB) • Two step High Pass Filter (Flat/80Hz) • Integrated shock mount • Rugged reinforced ABS construction • 3.5mm mini-jack output • 2 x 1.5V AAA battery • Cold shoe mount with 1/4 inch thread • Designed for use on DSLRs, Camcorders and Video Cameras Specifications: Type:  Stereo Condenser microphone Polar Pattern: Super-Cardioid Frequency Response: 40Hz ~ 20kHz Sensitivity:   -33dB +/- 3dB / 0dB=1V/Pa, 1kHz Signal to Noise Ratio: 76dB or more Output Impedance:   -10dB, 0dB Power:  2 X 1.5V AAA battery (not included) Plug: 3.5mm stereo mini-jack Filter: Controlled by low-cut filter switch Dimensions(LxHxD): 151x65x73mm Net Weight:  135g   Package Included: 1x BY-V02 Microphone  1x Windscreen 1x Shock Mount   Detail Pictures:

FREE SHIPPING INCLUDED!! 50M 3D HDMI EXTENDER OVER 1080P SINGLE CAT 5e / CAT 6 with EDID, IR and LOOP-OUT The HDMI Extender uses single cat-5E or cat-6 (cat-6  shielded twisted pair or better recommended) cables instead of HDMI cable to transmit high definition signal up to 50 meters. (saving on cabling costs) The Extender is designed to supply a long distance transmission of high definition signal. 2 devices are linked to transmit source device to display device.  The Transmitter and the Receiver. Transmitter FEATURES 1. Support HDMI 1.4a 2.Support 3D 3. Support highest video resolution 1080p/60Hz 4. Support Bi-directional IR Control 5. Support 1.49Gbps data rate and tmds clock up to 148.5MHz 6. Support 8 bit deep color 7. The transmitter support HDMI loop-out function. 8. The transmitter support EDID management. 9.Support AWG26 HDMI standard cable, HDMI input up to 10 meters, HDMI out r put up to 10 meters 10. Double legged transmission: By using single cat-5e or cat-6 (cat-6 TSP or better recommended) cable to connect the transmitter and receiver, it can extend the distance up to 50 meters between TX and RX, the quality of the cable will influence the transmission distance. Recommend copper cat-6 shielded twisted pair cable or better. 11.Need DC5V/1A power supply 12.EDID instruction   Receiver Physical Connection Showing Picture: Operating and Connecting: 1.Connect one HDMI cable between source device and TX Extender, the max cable distance is 10 meters 2.Connect one HDMI cable between display device and RX Extender, the max cable distance is 10 meters 3. Connect single cat-5e or cat-6(recommended) cables between TX and RX Extender, the max cable distance is 50 meters 4. The 2 pairs of IR RX and IR TX cable connect the 3.5mm IR RX and IR TX port of the receiver and transmitter respectively. 5. Connect 5V power supply to the TX and RX. 6.LED indicator light TX LED indicator light: When there is no signal input, it turns blue; When there is signal input, it turns red. RX LED indicator light: When there is no signal input, it turns blue; When there is signal input, it turns red.   Specification                      Length of CAT-6/CAT-5E cable between Rx and TX…………….............…..Up to 50 meters HDMI Input…..…………………...………24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i Support audio format.……………………………………………………………DTS/Dolby/PCM Support audio input..……............................…DTS-HD/Dolby-trueHD/DTS/Dolby-AC3/DSD HDMI Output…..…………….…...………24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i Max transmission bandwidth………………............................………………………148.5MHz Max baud rate……………….…….………………….………….……………………………1.49Gbps Input video signal ………….……………………..………………………….…… 0.5~1.5Volts p-p Output DDC signal …………………………………………...……………………… 5Volts p-p (TTL) Input HDMI cable distance………….…………............…..≤10m AWG26 HDMI standard cable Output HDMI cable distance............................................ ≤10m AWG26 HDMI standard cable TX Max working current………………………………………...………….………………...650mA RX Max working current…………………………………………...………………………...300mA Power adapter format………...………Input:AC (50HZ, 60HZ) 100V-240V; Output: DC5V/1A Operating Temperature range……..…………….………………………………… (-15 to +55¿) Operating Humidity range………………………….….……….5 to 90%RH (No Condensation) Dimension (L x W x H)     ……………………………….……………………81x87.5x23.5 (mm) TX Weight…..……………………………………………..………………………........………210g RX Weight........................................................................................................................200g    The Package includes: 1. TX Extender:1pc  & RX Extender:1 pc 2. IR RX Cable: 2 pcs  &  IR TX Cable: 2pcs 3. 5V DC Power adapter 4. User Manual 

BOYA BY-V02 Compact External Stereo Video Microphone For Canon Nikon DSLR Camera Description: BOYA BY-V02 is a stereo condenser microphone, for use with DSLR cameras, camcorders, and audio recorders, it features cost effective is an ideal for video use. The BY-V02 measures 5.94 inch(151mm) in length and includes a dead kitten windscreen, camera hot-shoe mount, and replaceable rubber O-rings suspend the microphone on the shock mount and protect against noise due to movement and handling. The light weight and compact condenser microphone is powered with 2pcs of AAA alkaline battery (not included). The stereo 1/8 inch (3.5mm) plug is compatible with a wide variety of different cameras and audio devices. Features: • Stereo X/Y Condenser Microphone • Broadcast sound quality • Adjust sound attenuation (-10dB,0dB) • Two step High Pass Filter (Flat/80Hz) • Integrated shock mount • Rugged reinforced ABS construction • 3.5mm mini-jack output • 2 x 1.5V AAA battery • Cold shoe mount with 1/4 inch thread • Designed for use on DSLRs, Camcorders and Video Cameras Specifications: Type: Stereo Condenser microphone Polar Pattern: Super-Cardioid Frequency Response: 40Hz ~ 20kHz Sensitivity: -33dB +/- 3dB / 0dB=1V/Pa, 1kHz Signal to Noise Ratio: 76dB or more Output Impedance: -10dB, 0dB Power: 2 X 1.5V AAA battery (not included) Plug: 3.5mm stereo mini-jack Filter: Controlled by low-cut filter switch Dimensions(LxHxD): 151x65x73mm Net Weight: 135g Package Included: 1x BY-V02 Microphone 1x Windscreen 1x Shock Mount Detail Pictures:

TELESIN 3 Slots Sports Remote Control Camera Battery Charger for Gopro Hero 5 4 3 with 2pcs Gopro Hero 5 Battery Description: -The charger is designed for GoPro Hero 5 4, can charge two AHDBT-401 battery and one remote control. -This kit includes one charger and two batteries. -Support separate and simultaneous charging. -Indicators help to show battery status. -Over current protection, over charge and discharge protection. -Two replacement batteries are included, 1200mAh high capacity. -Comes with two cases to carry and store the batteries. -With a USB cable, can be powered by AC adapter or computer. Specifications: Brand TELESIN Compatible for GoPro Hero 5 4 3(Battery Charger) Input 5V 2A Output1 4.3V 800mA Output2 4.3V 800mA Output3 5V 500mA Battery Capacity 3.8V 1200mAh(Gopro Hero 5 Battery) Charger Size 7 * 4.4 * 2.2cm / 2.8 * 1.7 * 0.9in Charger Weight 41g / 1.5oz Package Included: 1 x Charger 2 x Battery (Note: The battery is compatible with gopro hero 5) 2 x Battery Case Detail Pictures:

  100mW 650nm Green Beam Laser Pointer Pen Brandnew in a Gift Box This is much stronger than the regular red laser pointer you normally purchased for this price. And you will actually see the beam from the laser direction in the dark area. However, please do not expect too obvious beam and please do not expect it burn. It is Much Brighter For Sure!!!! THE LIGHT IS GREEN Perfect for teachers, students, engineers, doctors, managers and more. Design with clip, can hold it in pockets or clip on notebooks Lightweight and handy, suitable for put in your pocket or handbags Best suitable kit for professors, teachers, doctors, student presentation etc... Use the laser pointer to point at any desired targets on projection screens, video monitors, and presentation graphics Best choice of Gift! Cautions: Avoid direct eye exposure to laser beam Output power: Max 100mw. Output wavelength: 650 nm. Output mode: Constant Wave. Press button for ON / OFF. Powered by AAA 1.5V x 2pcs Batteries (Battery no included)  Note:  Use it carefully and safely, don‘t point at people and avoid eye contact. Please keep it away from children!!! Highlights: 100% brand new and high quality Max Laser output: 100mW With a clip for easy carrying Powered by 2 AAA 1.5V battery  Dimension of the pen:16cm in length, 1.4cm in diameter         Package: 1 x Brandnew Laser Pointer. (No retail packaging, Items will be wrapped by bubble plastic) Shipping Order will be sent form our warehouse in HongKong and China, we send order via two way: International Express Courier: Take about 3~7 days to be deliveried to your physical address, but also much depends on the customs clearing time. Tracking number and tracking website will be provided once we dispatch your order. We usually dispatch your order within 48 hours once your payment is reflected on our account. International Registered Airmail(HK or ChinaPost): Take about 10~25 working days to deliveried to your post office, then you need go and fetch it on your post office. The shipping time also depends on the SA customs process and SAPO. We will provide you the tracking number and tracking website normally within 24 hours once we dispatch your order. We dispatch orders on every twice a week. Please Note: SA customs may charge import tax, VAT etc., according to our clearing agency, parcel less than R500 value is free of charge(WE CAN'T GUARANTEE). The shipping we charge is only for the third party shipping cost,  buyer is responsible for any possible customs tax/duty.   Find more stunning stuffs - Just Click here to view all our items!

Description: The digital multimeter is a powerful, dependable tool that safely measures voltage, resistance and current, whether you are working around the house or for some automotive maintenance. Safely tackle many electrical problems around your home with this powerful multimeter, and you don't have to be an electrician to use this automotive multimeter. Features: Designed to safely and accurately troubleshoot a variety of automotive and household electrical problems. The multimeter uses 2 pieces 1.5V AA batteries(not included)as power supply and support auto power off function to save power. Its large 4 digit(6,000) display provides accurate, easy-to-read results that enable you to complete your work quickly and efficiently. Voltage testing function can test both AC and DC voltage and there is also low voltage indication function. Supports continuity testing, resistance testing, diode testing, temperature testing and 550V protection in resistance, capacitance ranges. Specifications: Capacitance 10nF(±5.0+20),100nF/1uF/10uF/100uF(±2.0%+5),1000uF/10000uF(±5.0%+5) DC Volts 600mV(±1.0%+10), 6V/60V/600V/1000V(±0.5%+3) AC Volts 600mV(±3.0%+3), 6V/60V/600V/750V(±1.0%+3) DC Current 600uA/6000uA(±0.8%+10) AC Current 600uA/6000uA(±0.8%+10), 60A/600A/1000A(±2%+30) Resistance 600Ω(±0.5%+3), 6K/60K/600K/6M(±0.5%+2), 60MΩ(±1.5%+3) Frequency 5/50/500/5k/50k/500k/5M/10M (±0.1+3) Temperature Range -20??nbsp;to 1000??nbsp;(-4??nbsp;to 1832?? Temperature Accuracy Duty Cycle 1% to 99%(±1%) Measurement Mode Double-integral style A/D transform Over Range Indication OL Operating Environment 0~40?? relative humidity Auto/Manual Ranges Yes True RMS Yes Sample Rate 3 times per second Backlight Yes Data Hold Yes Polarity Identification Yes Low Voltage Indication Yes Auto Power Off Yes Power Supply 2pcs 1.5V AA batteries (Not included) Size 23.3 x 7 x 3.5cm / 9.17 x 2.75 x 1.37" Package Included: 1 x ANENG AN8801 Digital True RMS Clamp Multimeter 2 x Test Leads 1 x Bag 1 x TP01K Thermocouple Detail Pictures:

Ultrathin 2.4GHz 1600DPI Wireless USB Optical Mouse Specifications: Material: ABS Color: Random Color Size: 110x58x20mm RF carrier: 2402-2480MHz RF operation channel: 16, auto frequency hopping Rated operating voltage: 1.5V Rated operated current: 6mA Capture trails system: optics Maximum acceleration: 14inch/s Resolution: 1600DPI Keystroke: 3,000,000 Keypad: Controlled by 4 mouse buttons Interface Type: USB 1.1/2.0 Operation systems: Windows 2000, Me, XP, Vista, Win 7 and Mac Power: 2pcs AAA battery (not included) Package Included: 1x Wireless Mouse