2ch amplifier

This range of two channel power amplifier is Class-D series, which built two separate amplifiers into a single chassis. The output power of this series amplifiers are 240W, 350W and 500W by two channels. The amplifiers are designed to be both tabletop and rack mount in 1U height. A shinning feature of this amplifier is that power electricity saving technology has been adopted. From one hand, switch power technology with APFC (Active power factor correction) had enhanced the efficiency up to 85%. From another hand, this amplifier is also preferable for much lower heat generation of less than 55 even at severe working conditions, thus this benefits are not only good for a green environment but also good for extension of life span

Smart compact size for tabletop or wall mounted design. Digital high efficiency mini amplifier. Stereo output 20 watts by two channels and bridged output 40 watts 2 Mic/line switchable inputs by phoenix connectors and 2 unbalanced aux inputs by dual RCA type Left and right master volume controls over Mic and music, bass and treble tone controls. Left and right channel outputs by phoenix connector, bridged or stereo output two options with switch Speaker stereo outputs at 4 ohms/ 8 ohms and speaker bridged output at 8 ohms. Built-in limiter for low noise and efficient operation, with limiter on/off switch, which make it suitable for laptop and iphone input. DC 24V power adapter is included.

Features: AUX audio signal input Line signal output Right channel speaker output Left channel speaker output DC 12V /5A input FM antenna The AC power input AC220V-240V/50Hz-60Hz Built-in wireless Bluetooth Speaker impedance: 4-16Ω SNR(Signal/Noise Ratio): -89dBn Input power: 12V/DC5A AC220V-240V Input impedance: 47KΩ Output power max: 300W R.M.S.40W Frequency: 20Hz-20KHz Input sensity: 0.25mV-220mV Packaged Included: 1 x Teli BT-1228 Amplifier 1 x Remote Control 1 x RCA Cable 1 x User Manual

The basic public address mixer amplifiers have power ratings from 30W, 60W, 120W, 240W, 350W, 500W to 650W. They are featured of 3 microphone inputs, 2 aux inputs and 2 EMC inputs. Priority muting is achieved via EMC1-2 for overriding other inputs except Mic1 on front panel. Individual gain controls are provided for Mic 1-3 and Aux 1-2, bass and treble controls and master volume control are provided for overall tone control. 70V, 100V and low impedance 4-16ohms speaker outputs are provided. Extensive protection from short-circuit, overload and high temp.

Buy 2CH bluetooth HIFI Stereo Power Amplifier Digital Audio Tuner Support FM Radio 2 Microphone USB S... for R1,409.00

Buy 2CH bluetooth HIFI Stereo Power Amplifier Digital Audio Tuner Support FM Radio 2 Microphone USB SD H for R1,279.00

Inter M - DPA-230DC 1U 2CH 300W Amplifier Powered by either 230v AC or 24v DC power, the Inter-M DPA-230DC is a 2 x 300W 100v line Power Amplifier, ideal for fixed public address/background music installations or portable applications which need to operate in an emergency situation or are powered by a backup power supply.The InterM DPA-230DC 2 channel amplifier may also be powered on/off by a remote switching contact providing an energy efficient solution for energy-conscious applications.

Crown - XLS1000 Power Amplifier 2ch Crown's XLS Series amplifiers define the standard for portable PA systems with unmatched performance, technology and affordability. Its advantageous flexibility includes multiple inputs so you can plug in anything and play anywhere, along with several system setup configurations. The integrated crossovers and switch-mode power supply produce superior sound, and Peakx¿ limiters protect your speakers. Weighing less than 12 pounds, compared to 40 pounds for its competitors, it's much easier to set up and move from show to show. Simply put, the XLS is most reliable, versatile, efficient amp available today.

Crown - XLS2500 Power Amplifier 2ch Crown's XLS Series amplifiers define the standard for portable PA systems with unmatched performance, technology and affordability. Its advantageous flexibility includes multiple inputs so you can plug in anything and play anywhere, along with several system setup configurations. The integrated crossovers and switch-mode power supply produce superior sound, and Peakx¿ limiters protect your speakers. Weighing less than 12 pounds, compared to 40 pounds for its competitors, it's much easier to set up and move from show to show. Simply put, the XLS is most reliable, versatile, efficient amp available today.

Crown - XLS1500Power Amplifier 2ch Crown's XLS Series amplifiers define the standard for portable PA systems with unmatched performance, technology and affordability. Its advantageous flexibility includes multiple inputs so you can plug in anything and play anywhere, along with several system setup configurations. The integrated crossovers and switch-mode power supply produce superior sound, and Peakx¿ limiters protect your speakers. Weighing less than 12 pounds, compared to 40 pounds for its competitors, it's much easier to set up and move from show to show. Simply put, the XLS is most reliable, versatile, efficient amp available today.

Buy BT-309A 220V 800W 2CH Home Stereo bluetooth Amplifier Support USB FM AUX MIC Mic for R1,219.00

Buy Lepy LP-168S 2x45W 2CH 4-8 Professional Amplifier for Home Theatre System for R1,113.56

Buy Kasen LS-50U 2x50W bluetooth 2CH Stereo Amplifier Support SD Card USB FM Microp for R3,859.65

The new MP Series of power amplifiers from Wharfedale Professional are the latest addition to the expanding range of Wharfedale Professional electronics. Built to last, the MP amplifiers are designed to withstand the rigours of life on the road and last a lifetime in professional installation. Sonic accuracy and durability are the most important features of your power amplifier. You need to be able to rely on your amplifier to perform time after time, giving the best reproduction of sound again and again. You can be sure of this with your MP Series power amplifier from Wharfedale Professional. Not only have they made sure the mechanical engineering is the best, also using an all steel chassis, but Wharfedale Professional have taken extra care with every single component that they have chosen to go into the unit. When Wharfedale Professional are satisfied, they assemble the amplifiers in there own factory. After passing a vigorous QC process using the most up to date test equipment, the amplifier is then worthy of Wharfedale Professional's guarantee. The MP Series of power amplifiers feature a continuously variable speed fan for optimum cooling. The airflow generated over the copper plated heatsink achieves massive heat dissipation, keeping the output devices evenly cooled throughout operation. The MP Series also features sophisticated protection circuitry - protecting both the amplifier and the speakers connected to it if a fault occurs. The thermal overload protection mutes the input signal when it senses the amplifier is running at unsafe temperatures. The short circuit protection keeps the output devices operating at a safe level even though the circuit itself allows high peak currents. The amplifier also features a Soft Start Protection circuit to avoid 'pops' in power up and power down situations. Features: Toroidal transfomer Rear panel ground lift switch Class AB Topology All steel construction Continuously variable speed fan Sophisticated protection circuitry including; Soft start protection relay; Thermal overload protection; Short circuit protection; Open circuit protection Front controls including: Power Switch, Channel A and Channel B gain controls Front panel LED indicators for Power On, Peak, Protect Stereo/Bridge Mode switch on rear of unit Technical Specifications: Power Per Channel (0.1% THD): Stereo mode, EIA: Bothe Channels Driven: 8 Ohms: 800W 4 Ohms: W 2 Ohms: W Bridged Mono Mode: 8 Ohms: W 4 Ohms: W Input Sensitivity: @ 4Ohms: v Unbalanced 1/4" Jack: 10Kohms Balanced XLR: 20Kohms Voltage Gain: 35dB Slew Rate (8 full swing): Stereo: 40v/u sec Channel Seperation: 78dB Signal to Noise (20Hz-20kHz): 100dB Distortion (SMPTE-1M): less than 0.05% Frequency Response: +/-1dB @ 4ohms: 20Hz-20kHz +/-3dB @ 4ohms: 5Hz-50kHz Damping Factor (8Ω, 1kHz): greater than 400 Topology: H Connectors: Input: XLR & 1/4" TRS Output: 5-Way bending post & speakon or speakon™ Cooling: Variable speed fan Weight (kg): Gross: 29.5Kg Net: 28Kg Product Dimensions (mm): Height: 133 Width: 483 Depth: year limited guarantee. For more info on this product please click here

This range of two channel power amplifier is Class-D series, which built two separate amplifiers into a single chassis. The output power of this series amplifiers are 240W, 350W and 500W by two channels. The amplifiers are designed to be both tabletop and rack mount in 1U height. A shinning feature of this amplifier is that power electricity saving technology has been adopted. From one hand, switch power technology with APFC (Active power factor correction) had enhanced the efficiency up to 85%. From another hand, this amplifier is also preferable for much lower heat generation of less than 55 even at severe working conditions, thus this benefits are not only good for a green environment but also good for extension of life span. Two channel separate balanced line inputs by phoenix connectors. Two channel RJ45 ports for remote power control, volume control and status monitor. Remote power on/off could be done through the RJ45 port. Two channel separate speaker outputs of 100V line without transformer. Two Channel separate volume control. Two channel separate status indicators include signal, peak and protection. AC 190V to 240V wide voltage input suitable for global distribution. Two channel separate DC 24V input for higher reliability, which is also designed of wide range protection within 20V to 25.6V, so as to protect battery during power shortage and protect circuit from high voltage damage. Two channel separate cooling system to ensure the system internal temp kept under 55. Extensive protection includes high temp, overload and short-circuit.

Features: Support 4 way microphone input LED display 2 tack output With EQ Reverberation, fine tuning, balance, SD, USB interface. Specifications: Voltage: 220V - 240V 50/60Hz Rated power(RMS): 200W + 200W Max Power:400W+400W Standard impedance: 4 to 16ohm Frequency response: 20KH - 20KHz (+ 3dB) S/N:≥ 90dB Distortion: ≤ 0.5% Signal input sensitivity: 200mV (+ 30mV) Microphone input sensitivity: 9 MV (+ 2mV) The recording output level: 1V The auxiliary output level: 1V Type of power amplifier: AV power amplifier Vocal tract: 2 vocal tract Support:USB Disk/Max 64GB SD Card(Not included) Package Included: 1 x Amplifier 1 x Remote Control

Buy Sunbuck AV-MP326BT 220V 800W 4 ohm 2CH EQ bluetooth Stereo Amplifier Support USB Disk SD Card for R2,000.00

Buy 3pcs 2CH Channel Optocoupler Isolation Relay Module 5V SCM PLC Signal Amplifier Board for R380.36

Buy 10pcs 2CH Channel Optocoupler Isolation Relay Module 24V SCM PLC Signal Amplifier Board for R1,610.16

Buy 3pcs 2CH Channel Optocoupler Isolation Relay Module 24V SCM PLC Signal Amplifier Board for R295.00

TELEFUNKEN TTCA-200 2CH CAR AMPLIFIER 1000W NEW PLEASE CONTACT BARGAIN BOX 23 THABO MBEKI STREET

Marshall - JVM205H 50W 2CH Head In a nutshell, the Marshall all-valve, 2-channel JVM205H 50W tube head is a 2-channel, 50W version of the most versatile Marshall amplifier ever made, the JVM410H. Both channels are completely independent of each other and they boast 3 Modes, all 6 of which are footswitchable and feature their own unique gain structure. It effectively makes the JVM205H 6 Marshalls in one! The JVM205H has studio-quality digital reverb with a level control for each channel. This is also footswitchable, as are the amp's two Master Volume controls and the Series/Parallel effects loop. Resonance and Presence are also equipped with master controls. With its ingenious footswitch (UK patent pending) and the fact all the amp's switching (channel/modes, Reverb, Master Volume selection, FX loop) can be done via MIDI, you're looking at an incredibly flexible amp! The 4-way footswitch boasts LEDs and memory, plus it connects to the amp via a regular guitar cable.

PAM8406 Binaural Amplifier Board No noise Stereo Amplifier 2 X 5W Feature: DC single power supply: 2.5-5V recommended voltage: 5V Maximum output power: 5Wx2 [2ch / 2 channel] Output Impedance: 2-8 Europe Board Size (width / length): 42X45mm   Use DC single power supply, external LINE IN / 2.54mm 3p plugs or a stereo headphone plug signal input to make active amplifier role.   Left and right channel output circuit using 2.54mm 2p socket, no need electric soldering iron Package included: 1 x PAM8406 Binaural Amplifier Board No noise Stereo Amplifier 2 X 5W

The Triflex™ II is a Watt three piece, two-channel sound system, already tweaked and ready to go for sound reinforcement, DJ gigs, and various music playback duties. Consisting of a shared Subwoofer cabinet and a pair of Satellite speakers, the system has been pre-engineered for a balanced sound and a crisp, punchy presentation. The three-way effective performance that the system is capable of provides a clear sound at high output levels, with plenty of punchy bass. Features: W Active Two-Channel Three-piece Speaker System One shared Subwoofer cabinet which houses the inputs and power amps Two two-way Satellite speakers with speaker pole stand adaptors Subwoofer has 15" woofer, with 500W peak available power Satellite speakers have 10" woofer, RX " compression driver tweeter 250W peak available power to each Satellite speaker Peavey's exclusive DDT™ compression on the Satellite power amps System comes with two 15 foot speaker cables Protective slipcover with cable storage pockets and built-in Velcro retaining straps Heavy-duty locking casters on Subwoofer cabinet for transport of system Satellite speakers nest on top of the Subwoofer, help ease transport Four-pin twist-lock connectors on amplifier outputs and Satellite inputs Weight Unpacked: lb(72.5 kg) Weight Packed: lb(90.5 kg) Width Packed: cm) Height Packed: cm) Depth Packed: cm) ***Speaker stands sold separately*** 1 year limited guarantee For more info on this product please click here

OverviewIPR2? power amplifiers, designed for years of reliable, flawless operation under rigorous use. The groundbreaking IPR2 series utilizes an advanced design that allows Peavey engineers to dramatically reduce weight while increasing output power, reliability and thermal efficiency. IPR2 Series amplifiers are designed with a resonant switch-mode power supply and a high-speed class D topology that yields the highest audio resolution and efficiency available. This revolutionary amplifier offers the sonic superiority and unsurpassed reliability for which Peavey is famous, in an extremely efficient and lightweight design. Advanced technology and extensive protection circuitry allow operation with greater efficiency into difficult loads and power conditions. The DDT? (Distortion Detection Technique) circuitry ensures trouble-free operation into loads as low as 2 ohms. DDT protects drivers and ensures that sonic integrity is maintained, even in extreme overload conditions. The IPR2's high-efficiency design allows the amplifier to operate at very low temperatures, and does not require massive heat sinks to cool.Features2- Channel independent fourth-order Linkwitz-Riley crossoversDDTRevolutionary IPR class D topologyDetented input controlsSpeakon output connectorsLight WeightLED illuminatedCombi XLR 1/4" inputsRated Watts 2ch x 2 ohms: 1100 watts 20ms repetitive burst / 900 watts 1% THD both channels driven @ 1kHz.Rated Watts 2ch x 4 ohms: 600 watts 20ms repetitive burst / 570 watts 1% THD / 530 watts 0.15% THD, both channels driven @ 1kHz.Rated Watts 2ch x 8 ohms: 370 watts 20ms repetitive burst / 325 watts 1% THD / 300 watts 0.15% THD, both channels driven @ 1kHz.Individual signal pass 1/4" jacks on each channelWeight Unpacked: 8.16 lb(3.7 kg)Weight Packed: 10.80 lb(4.9 kg)Width Packed: 12.4"(31.496 cm)Height Packed: 21"(53.34 cm)Depth Packed: 4.7"(11.938 cm)

Two combo inputs (2-way XLR and Mono jack 6.35) are available in EA512. CH A input can be switched between line input or microphone input. Besides, there is a RCA port for other sound resources like MP3, CD player, etc. The three different audio sources can be parallel output with one-way XRL after mixed internally, and then sent to different speakers for sound distribution. EA512 can be installed either horizontally or vertically by steel wire and U bracket, or vertically by single-point hanging frame. Also, it can be ground standing by coupling bar or three-feet stand. The double mount is 0°/10°adjustable by just pushing the button. Various accessories are offered for EA512 to meet different kinds of installs Active DSP-controlled full range loudspeakerType Frequency Response (-6dB anechoic chamber) 45Hz-20KHz Maximum Calculated SPL/1M 134dB LF Driver Customized AUDIOCENTER ferrite driver, 3” voice coil HF Driver Customized BEYMA ferrite driver, 1.0” exit, 1.75” voice coil Horizontal Coverage Angle(Symmetrical) 60° Vertical Coverage Angle(Symmetrical) 40° AMPLIFIER Amplifier Circuitry Class D Power(Peak) 2000W Frequency Response(1W 8Ω 2ch) 20Hz-20KHz(±0.5dB) Intermodulation Distortion 0.05% Total Harmonic Distortion 0.05% Protection DC protection, short circuit protection, overheat protection, input overload protection, output overload protection, soft startup protection, overvoltage protection, undervoltage protection Cooling System Cooling with fans, air convection DSP Processor 96KHz signal sampling frequency, 24bit precision Presets MAIN, F/Monitor, W/SUB Crossover Controlled by DSP Output / Input Signal Input 2×NEUTRIK® female XLR, Mono jack 6.35, 1×RCA Signal Output  2×NEUTRIK® male XLR Power Input 3 pin plug Working Voltage 100V-130V/60Hz or 220V-240V/50Hz Cabinet Cabinet Material CNC made of excellent wood Cabinet Color Black and white available, can be customized according to the RAL code Dimension(W×H×D) 374×608×378mm Net Weight 25.0Kg 3 low-pass filters (80Hz, 100Hz, 120Hz) in EA5118 are available to choose according to different venues and music styles. There is also phase switch. All connectors and function buttons are on the back panel. EA5118 subwoofer is with 1-way XLR for input and output. Signals can be sent to different speakers for sound distribution. Type  Active DSP-controlled Compact Subwoofer Frequency Response (-6dB anechoic chamber) 35Hz-150Hz Maximum Calculated SPL/1M 137dB LF Driver Customized AUDIOCENTER ferrite driver, 4” voice coil AMPLIFIER Amplifier Circuitry Class D Power(Peak) 2000W Frequency Response(1W 8Ω 2ch) 20Hz-6KHz(±0.5dB) Intermodulation Distortion 0.05% Total Harmonic Distortion 0.05% Protection DC protection, short circuit protection, overheat protection, input overload protection, output overload protection, soft startup protection, overvoltage protection, undervoltage protection Cooling System Cooling with fans, air convection DSP Processor 96KHz signal sampling frequency, 24bit precision Presets 80Hz,100Hz, 120Hz Crossover Controlled by DSP Output / Input Signal Input 1×NEUTRIK® female XLR Signal Output  1×NEUTRIK® male XLR Power Input 3 pin plug Working Voltage 100V-130V/60Hz or 220V-240V/50Hz Cabinet Cabinet Material CNC made of excellent wood Cabinet Color  Black and white available, can be customized according to the RAL code Dimension(W×H×D) 510×625×712mm Net Weight 42.5Kg 

General   DOWNLOAD SPEC SHEET   Color Black Design Concept Basic, Straight Soundbar Design with One Control Number of Channels 3.1 Ch Total Power (W) 340 W Frequency Response (amp) 40Hz~20KHz Features Anynet+ (HDMI-CEC) Yes Audio Processing Dolby Digital Dolby 5.1ch DTS Digital Surround DTS 2ch Audio Features Amplifier Crystal Amplifier Number of Sound Modes (DSP) 5 (Standard, Music, Clear Voice, Sports, Movie) Video Features 3D Video Pass Yes Speakers Number of Speakers 6

   3 low-pass filters (80Hz, 100Hz, 120Hz) in EA5118 are available to choose according to different venues and music styles. There is also phase switch. All connectors and function buttons are on the back panel. EA5118 subwoofer is with 1-way XLR for input and output. Signals can be sent to different speakers for sound distribution. Type   Active DSP-controlled Compact Subwoofer Frequency Response (-6dB anechoic chamber) 35Hz-150Hz Maximum Calculated SPL/1M 137dB LF Driver Customized AUDIOCENTER ferrite driver, 4” voice coil AMPLIFIER   Amplifier Circuitry Class D Power (Peak) 2000W Frequency Response (1W 8Ω 2ch) 20Hz-6KHz(±0.5dB) Intermodulation Distortion ¿0.05% Total Harmonic Distortion ¿0.05% Protection DC protection, short circuit protection, overheat protection, input overload protection, output overload protection, soft startup protection, overvoltage protection, undervoltage protection Cooling System Cooling with fans, air convection DSP   Processor 96KHz signal sampling frequency, 24bit precision Presets 80Hz,100Hz, 120Hz Crossover Controlled by DSP Output / Input   Signal Input 1×NEUTRIK ®  female XLR Signal Output  1×NEUTRIK ®  male XLR Power Input 3 pin plug Working Voltage 100V-130V/60Hz or 220V-240V/50Hz Cabinet   Cabinet Material CNC made of excellent wood Cabinet Color  Black and white available, can be customized according to the RAL code Dimension (W×H×D) 510×625×712mm Net Weight 42.5Kg      

Product Overview Two combo inputs CH A (1-way XLR and Mono jack 6.35) are available in SA312, which can be switched between line input and microphone input. The audio port CH B(Mono jack 6.35 or a RCA port) is for the other sound resources like MP3, CD player, etc. There is 1-way signal input port for wireless bluetooth in it and the volume is controlled by terminal. The gain of CH A/CH B signal input is controlled by independent knob and 1-way master volume control knob. The four different audio sources can be parallel output with one-way XLR after mixed internally, and then sent to different speakers for sound distribution.  SA312 can be installed by steel wire. It can also be ground standing by coupling bar or three-feet stand. The pole mount is 35mm. Various accessories are offered for SA312 to meet different kinds of installs.     AMPLIFIER   Amplifier Circuitry Class D Power (Peak) 2000W Frequency Response (1W 8Ω 2ch) 20Hz-20KHz(±0.5dB) Intermodulation Distortion 0.05% Total Harmonic Distortion 0.05% Protection DC protection, short circuit protection, overheat protection, input overload protection, output overload protection, soft startup protection, overvoltage protection, undervoltage protection Cooling System Cooling with fans, air convection DSP   Processor 96KHz signal sampling frequency, 24bit precision Presets Adjustable via the knobs on the back panel Crossover Controlled by DSP Output/Input   Signal Input 1×NEUTRIK ®  female XLR(Mono jack 6.35), 1×Mono jack 6.35,1×RCA,1×wireless Bluetooth Signal Output  1×NEUTRIK ®  male XLR Power Input 3 pin plug Working Voltage 100V-130V/60Hz or 220V-240V/50Hz     

  Two combo inputs (2-way XLR and Mono jack 6.35) are available in EA512. CH A input can be switched between line input or microphone input. Besides, there is a RCA port for other sound resources like MP3, CD player, etc. The three different audio sources can be parallel output with one-way XRL after mixed internally, and then sent to different speakers for sound distribution. EA512 can be installed either horizontally or vertically by steel wire and U bracket, or vertically by single-point hanging frame. Also, it can be ground standing by coupling bar or three-feet stand. The double mount is 0°/10°adjustable by just pushing the button. Various accessories are offered for EA512 to meet different kinds of installs   Active DSP-controlled full range loudspeakerType   Frequency Response   (-6dB anechoic chamber)   45Hz-20KHz   Maximum Calculated SPL/1M   134dB   LF Driver   Customized AUDIOCENTER ferrite driver, 3” voice coil   HF Driver   Customized BEYMA ferrite driver, 1.0” exit, 1.75” voice coil   Horizontal Coverage Angle(Symmetrical)   60°   Vertical Coverage Angle(Symmetrical)   40°   AMPLIFIER       Amplifier Circuitry   Class D   Power(Peak)   2000W   Frequency Response(1W 8Ω 2ch)   20Hz-20KHz(±0.5dB)   Intermodulation Distortion   0.05%   Total Harmonic Distortion   0.05%   Protection   DC protection, short circuit protection, overheat protection, input overload protection, output overload protection, soft startup protection, overvoltage protection, undervoltage protection   Cooling System   Cooling with fans, air convection   DSP       Processor   96KHz signal sampling frequency, 24bit precision   Presets   MAIN, F/Monitor, W/SUB   Crossover   Controlled by DSP   Output / Input       Signal Input   2×NEUTRIK® female XLR, Mono jack 6.35, 1×RCA   Signal Output    2×NEUTRIK® male XLR   Power Input   3 pin plug   Working Voltage   100V-130V/60Hz or 220V-240V/50Hz   Cabinet       Cabinet Material   CNC made of excellent wood   Cabinet Color   Black and white available, can be customized according to the RAL code   Dimension(W×H×D)   374×608×378mm   Net Weight   25.0Kg