24v 5a 120w ac

Buy HANPOSE AC 110/220V to DC 12V 5A 60W/24V 5A 120W Universal Switching Power Supply for R340.00

Buy Genuine FSP FSP120-AFB 48V 2.5A 120W 4PIN FSP120-AFA AC Adapter For CiSCO SG300 SG-300-10P for R1,741.00

Buy 120W/200W Power Inverter Charger AC 12V/24V To DC 110V/220V AC Converter LED 4 USB for R883.41

Description: 120W 1inch Female to 20mm Male Circulation Pump Water Flow Sensor Switch When the water flow in the pipe is more than 0.75L / min, the core displacement under the action of water and promote the role of the magnetic source generates magnetic sensor outputs "1" switching signal, the signal input to the device control system, by expanding the power amplification to achieve the purpose of the water flow control. When the pipe in the water flow is less than 0.75L / min flow rate, the core magnetic source drive return under the action of the reset spring force, so that the sensor outputs "0" switch signal to stop operation of the system. Features: Stable, high temperature, low water pressure start, safe. Detect whether the liquid flow line and traffic is to meet the requirements, at the same time by switching electrical contacts provide a signal output ON or OFF state. Equipment system by detecting the presence of a signal or a control current to pass therethrough (flow switch electrical contacts pass, off state) on the switch to determine the working status of the piping system. Specifications: Power: 110W Voltage: AC 220V Current: 0.5A Water Temperature Range: ≤100??br />Pressure: ≤0.6Mpa Female Port Thread Dia: OD29mm / ID25mm hole: 13mm Male Thread(Fit Pipe Dia): OD20MM / ID12mm Body Size(Approx.): 67 x 50 x 35mm Cable Length: 26cm Package includes: 1 x Water Flow Sensor Switch Details pictures:

Description: 120W 1inch Female to 20mm Male Circulation Pump Water Flow Sensor Switch When the water flow in the pipe is more than 0.75L / min, the core displacement under the action of water and promote the role of the magnetic source generates magnetic sensor outputs "1" switching signal, the signal input to the device control system, by expanding the power amplification to achieve the purpose of the water flow control. When the pipe in the water flow is less than 0.75L / min flow rate, the core magnetic source drive return under the action of the reset spring force, so that the sensor outputs "0" switch signal to stop operation of the system. Features: Stable, high temperature, low water pressure start, safe. Detect whether the liquid flow line and traffic is to meet the requirements, at the same time by switching electrical contacts provide a signal output ON or OFF state. Equipment system by detecting the presence of a signal or a control current to pass therethrough (flow switch electrical contacts pass, off state) on the switch to determine the working status of the piping system. Specifications: Power: 110W Voltage: AC 220V Current: 0.5A Water Temperature Range: ≤100℃ Pressure: ≤0.6Mpa Female Port Thread Dia: OD29mm / ID25mm hole: 13mm Male Thread(Fit Pipe Dia): OD20MM / ID12mm Body Size(Approx.): 67 x 50 x 35mm Cable Length: 26cm Package includes: 1 x Water Flow Sensor Switch Details pictures:

IN STOCK at supplier. If ordered before 12PM: DELIVERED next day (main centres) or 2-3 days (regional areas or large items) COLLECTION from Geewiz available Same Day (approx 4pm) NB - We will be closed Mon/Tues 1/2 October for the end Sukkot. All orders placed will be processed on Wed 3 October. PRODUCT DESCRIPTION PSU-24V60W, 24V 2.5A adapter, is ideal when you require a power supply with sufficient current for your application. The power input is 100V-240V ac via IEC power cable (Not included). Could be used with POE-4G, or POE-8G units to provide passive power to PoE devices. Not recommended for IP phones or cameras unless specified that the unit supports 24V passive POE.

Scoop's PSU-24V120W, 24V 5A adapter, is ideal when you require a power supply with sufficient current for your application. The power input is 100V-240V ac via IEC power cable (Not included). Could be used with Scoop's POE-8G or POE16G units to provide passive power to PoE devices. Not recommended for IP phones or cameras unless specified that the unit supports 24V passive POE.(019)

Specification: Brand:NVVV Input: AC 200-240V 5.5A max. Output: 24V DC 5A Wattage: 120W Efficiency:85% Working Temperature: -10~60￢ﾄﾃ Size:199MM98MMX38MM(LXWXH) Modulation Mode: PWM Pulse Width Modulation Shell Material: Metal case / Aluminum base Weight:560g(approx.) Feature: Safety Compliance: CCC/ CE Suitable for all kinds of electronic equipment. Protection: Protections: overload/ over voltage/ short circuit. Widely used in Industrial automation, LED display, communications, etc. Over-voltage protection 105%~150%, Current limit and auto recovery, over-load protection. Package Content: 1 x Switch Power Supply More details:

Buy HP 120W 18.5V 6.5A (7.4 x 5.0mm Pin) Replacement Laptop Charger - AC Adapter for R799.00

Buy HP 120W 18.5V 6.5A (7.4 x 5.0mm Pin) Replacement Laptop Charger - AC Adapter for R899.00

The UAP-AC-LITE by Ubiquiti features an ultra-compact design, the UniFi AC Lite AP delivers a cost-effective combination of value and performance in a reduced footprint: 25% smaller than the standard UniFi AP. The UniFi AC Lite AP provides simultaneous, dual-band, 2x2 MIMO technology. The UniFi 802.11AC Dual-Radio APs feature the latest in Wi-Fi 802.11AC MIMO technology and offers unlimited scalability. Specifications: - Networking Interface: (1) 10/100/1000 Ethernet Port - Buttons: Reset - Antenna: (2) Dual-Band Antennas, 3 dBi Each - Wi-Fi Standards: 802.11 a/b/g/n/ac - Power Method: Passive Power over Ethernet (24V), (Pairs 4, 5+; 7, 8 Return) - Power Supply: 24V, 0.5A Gigabit PoE Adapter (Supplied in Single Pack only) - 24v passive PoE: Supported - 802.3af PoE: Supported 'Mode A' only - Maximum Power Consumption: 6.5W - Maximum TX Power 2.4 GHz: 20 dBm - Maximum TX Power 5 GHz: 20 dBm - BSSID: Up to Four per Radio - Power Save: Supported - Wireless Security: WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES) - Mounting: Wall or Ceiling (Kits Included) - Operating Temperature: -10 to 70° C - Operating Humidity: 5 to 95% Noncondensing - Dimensions: 160 x 160 x 31.45 mm - Weight: 170g - Weight with Mounting Kits: 185 g

The UAP-AC-LR by Ubiquiti is ideal for long-range deployments. The UniFi AC LR AP offers simultaneous, dual-band operation with 3x3 MIMO in the 2.4 GHz band and 2x2 MIMO in the 5 GHz band. The innovative antenna design provides a long-range, symmetrical-link coverage area, and the antenna gain of the UniFi AC LR AP performs better than one-way, high transmit power does for connecting distant clients. The UniFi 802.11AC Dual-Radio APs feature the latest in Wi-Fi 802.11AC MIMO technology and offers unlimited scalability Specifications: - Networking Interface: (1) 10/100/1000 Ethernet Port - Buttons: Reset - Antennas: (1) Dual-Band Antenna, Tri-Polarity, 2.4 GHz: 3 dBi, 5 GHz: 6 dBi - Wi-Fi Standards: 802.11 a/b/g/n/ac - Power Method: Passive Power over Ethernet (24V), (Pairs 4, 5+; 7, 8 Return) - Power Supply: 24V, 0.5A Gigabit PoE Adapter (In single pack only) - 24v passive PoE: Supported - 802.3af PoE: Supported 'Mode A' only - Maximum Power Consumption: 6.5W - Maximum TX Power 2.4 GHz: 24 dBm - Maximum TX Power 5 GHz: 22 dBm - BSSID: Up to Four per Radio - Power Save: Supported - Wireless Security: WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES) - Mounting: Wall or Ceiling (Kits Included) - Operating Temperature: -10 to 70° C - Operating Humidity: 5 to 95% Noncondensing - Dimensions: 175.7 x 175.7 x 43.2 mm - Weight: 240g - Weight with Mounting Kits: 315 g

Features: -Universal AC input / full range. -Protection function: short circuit / overload / overvoltage. -Through free air convection cooling. -100% full load burner test. Specification: Brand:NVVV Modulation Mode:DIN-Rail Mounting Output Power:60W Output Current:2.5A Input Voltage:100-240V AC Output Voltage:DC 24V O utput Voltage Accuracy:±1% Output Ripple Noise:140mVp-p Load Regulation:±0.5% Working Frequency:50/60HZ Certified Product:CE Operating Temperature:-10~+50￢ﾄﾃ Work Efficiency:98% Voltage Regulation:±10% Size:78X56X93MM Package includes: 1 x Industrial Rail Power Supply Details pictures:

IN STOCK at supplier. If ordered before 12PM: DELIVERED next business day (main centres) or 3-5 business days (regional areas or large items) COLLECTION from Geewiz available Same Day (approx 4:30pm) PRODUCT DESCRIPTION PSU-48V120W, 48V 2.5A adapter is ideal when you require a power supply with sufficient current for your application. The power input is 100V-240V ac via Kettle power cable (Not included). Could be used with POE-4G, or POE-8G units to provide passive power to PoE devices such as IP phones or cameras as an alternative to the 802.3af/at POE switches. Compatible with POE-8GAT.

Features:    -Universal AC input / full range. -Protection function: short circuit / overload / overvoltage. -Through free air convection cooling. -100% full load burner test.   Specification: Brand:NVVV Modulation Mode:DIN-Rail Mounting Output Power:30W Output Current:1.5A Input Voltage:100-240V AC Output Voltage:DC 24V Output Voltage Accuracy:±1% Output Ripple Noise:140mVp-p Load Regulation:±0.5% Working Frequency:50/60HZ Transistor Connection:single-ended Certified Product:CE Operating Temperature:-10~+50℃ Work Efficiency:80% Voltage Regulation:±10% Size:78X56X93MM   Package includes:    1 x Industrial Rail Power Supply   Details pictures: