1800w 230vac line

The JD Media Mobile 60 is a c ompact 60 watt mixer amp which can be used on mains power (230V AC) or 12 volt battery (12 Volt DC).   The tuner or digital message module can be fitted internally for a neat self contained audio solution. 2 x mic inputs, 1 x Aux input, 1 x mic/Aux input and 1 x tape input. 60 watt 100 volt line Vox priority on Mic 1 and 2 Telephone input VU meter 230VAC and 12v DC operation   Output power: 60 watts Impedance: 100 volt and 4-16ohm outputs No. Inputs: 3 microphone inputs + 2/3 Line inputs possible Output zones: 1 zone Rack mountable: No Power supply: 230VAC &12VDC Dimensions (HxWxD): 88mm x 375mm x 260mm Weight: 6.6Kg   Optional module slot (TP-100RDS, CDP-100MU, CDR-100RDSU, DM-100)  - Easy to use amplifier for both mobile and fixed installation  - Balanced microphone inputs  - Low & hign pass tone control to increase intelligibility  - Tel input terminal for tel night ringer  - LED level meter  - Over current protection  - 3 Mic inputs, 2 AUX & 1 Tape input  - AC / DC12V  - Bass & treble tone control for pack module      THD at 1kHz  Mobile35: less than 1% at 25W    Mobile60: less than 1% at 40W    Output  REC: - 6dB / 3K Unbalanced    Input sensitivity /impedance  Mic: - 50dB /2K BAL    Aux: - 20dB/ 60k (AUX1) BAL    - 20dB/ 15k (AUX2) BAL  Tape: 0dB/3k Unbal  Frequency response  Less than -3dB 150Hz~18kHz (at 1%THD)    Signal to Noise Ratio  Aux: more than 70dB    Mic: more than 60dB  Tone filter  Low 40Hz~400Hz -6dB/oct  High 2.5kHz~20kHz -6dB/oct    Power Consumption  Mobile35: 130W, Mobile 60: 215W    Max curr. draw (220, 230V)  Mobile35: 0.55A, Mobile60: 1A  Power Source(Option)  AC220V/60Hz DC12V  Dimensions (mm)  375(W) x 88(H) x 260(D)  Weight(kg/lbs)

Professional active speaker cabinet for a wide range of different applications. Heavy duty Polypropylene cabinet housing Bi-Amping technology with separate amplifiers for woofer and tweeter for maximum impact: woofer 245W + tweeter 55W RMS-power Fully tuned 6-Band parametric EQ for perfect sound Active 2-way crossover Perfect for both permanent installations and portable use (Rental, DJ,...) Equipped with a 15" high power woofer & a 1.75" compression driver 2 Balanced MIC + 1 LINE input with level control Balanced LINE output Treble + Bass controls + Master volume Blue power LED on the front panel Built-in M8 Rigging points Built-in 35mm stand adapter Monitor support stands included Built-in heavy duty carrying handle Heavy duty rubber feetAmplifier Tweeter: 55Wrms Amplifier Woofer: 245Wrms Freq. Resp. (+/-3dB): Hz THD (1kHz / 1W): 0,10% Input Sensitivity line: 1V Input Sensitivity micro: 15mV Input impedance 20 kohm S/R ratio (mic off): >85dB EQ low: +/-12dB @ 100Hz EQ high: +/-12dB @ 10kHz Cooling: natural air cooling Microphone input: Bal/unbal XLR/Jack Line input: Bal/unbal XLR 3pin Line outputs: Bal/unbal XLR 3pin Fuse (5x20mm): F5A / 250V Power supply: 115Vac/60Hz 230Vac/50Hz Dimensions HxWxD (mm): 680 x 470 x 400 Weight (kg): 23.3

QX Series Active Moulded Speakers with Bluetooth®Active PA speaker units in a contemporary styled moulded cabinet with integral carry handle and a constant directivity horn. The built-in mixer section includes mic, line and Bluetooth connection. A powerful built-in amplifier completes the feature set of this flexible and very capable cabinet.Bluetooth connectivityHigh output built-in amplifierIndividual microphone and line input sectionsTitanium compression driver35mmØ internal top hat pole mountSpecification: CommonPower supply 230Vac, 50Hz (FIg.8)Bluetooth version 2.1SNR 87dBTHD 0.1%Dispersion 90° x 60° (H x V)Impedance 4 OhmsSpecification: Versions 178.752UK 178.753UKInputs Line (XLR, Jack) Line (XLR, Jack)Power max. 200W 300WPower rms 100W 150WSPL @ 1W/1m 94dB 97dBLF driver 200mm (8") 250mm (10")LF driver: coil size 35mmØ 52mmØHF driver 25mm Ti compression driver 25mm Ti compression driverHF driver: coil size 25mmØ 25mmØFrequency response 55Hz - 20kHz 48Hz - 20kHzMax. SPL 117dB 121dBCrossover frequency 4kHz 4kHzDimensions 290 x 400 x 225mm 320 x 470 x 270mmWeight 6.8kg 8kg

Active PA system comprising of a sub cabinet with integral amplifier feeding 2 satellite cabinets. The sub cabinet also houses a versatile mixing console with effects for vocals and line inputs for instruments and playback devices. Built-in 6 input mixer with effects 2 x balanced XLR mic inputs + 2 x 6.3mm line inputs Main, Line, Aux and Pre outputs Twin RCA inputs on rear panel 3 band EQ and Aux control on each channel Sub-bass Frequency and Level controls Headphone output with level control Dual 6 segment LED level indicator Castors fitted for transportation Supplied with 2 x 5m speaker leads and 2 compact speaker stands set Power Supply: 230Vac, 50Hz Satellite Impedance: 8 ohms THD: Sub Driver: 380mm (15in) Satellite Main Drivers: 250mm (10in) Output Power RMS: 350 + 125 + 125W Frequency Response: 38Hz - 18kHz Dimensions - Sub Cabinet: 670 x 480 x 530mm Dimensions - Satellite Speaker: 500 x 340 x 290mm Weight - Sub Cabinet: 30.4kg Weight - Satellite Speaker: 11kg

Digital Stereo AmplifierThis compact digital amplifier has four selectable inputs, two microphone inputs and is capable of delivering up to 55W max. per side. Mic volume, tone and echo effects are adjustable through rotary controls. Master Volume, Treble and Bass rotaries control tone and overall output. A multi-purpose amplifier suitable for both domestic and commercial use.Efficient Class D digital amplifierA high output power of 55W max. per side3.5mm stereo line input on the front panel3 stereo line inputs on RCA2 x 6.3mm microphone inputsSpring clip speaker output terminalsSpecificationPower supply 230Vac, 50Hz (IEC)Output impedance 4 - 8 OhmsInput sensitivity: line 380mVInput sensitivity: mic (unbalanced) 15mVOutput power: 8 Ohms 2 x 25W rms / 2 x 40W max. (EIAJ Standard @ 1kHz 10% THD)Output power: 4 Ohms 2 x 35W rms / 2 x 55W max. (EIAJ Standard @ 1kHz 10% THD)Finish BlackDimensions 200 x 200 x 65mmWeight 1.6kg

The perfect solution for many DMX-line problems: this mini DMX-splitter divides any DMX-chain in 2 separate lines that will not interfere with each other, problems on 1 line will not influence the other line! Maximum security, thanks to complete galvanic isolation between all in/outputs 100% RDM compatible for bidirectional DMX-communication The booster function makes your DMX-installation more reliable and flexible to set up. Specially designed for professionals: Small size: can be hidden anywhere Very robust construction: perfect for the rental guys Can be fitted with any standard truss clamp: easy truss installation Prepared for use with our COMBI-cables (combined power+DMX): 1 INPUT: DMX 3pin + 5pin XLR + 10A IEC-power 2 OUTPUTS: each with DMX 3pin XLR + 10A IEC-power Internal power 230Vac supply Technical Information Power Input: AC230V / 50Hz. Max. Total Output Power: Max.10A over both outputs together DMX input: 3pin or 5pin XLR DMX outputs: 3pin XLR Size: 130 x 132 x 56mm Weight: kg

QTX QX15A active speaker   Active PA speaker units in a contemporary styled moulded ABS cabinet with integral carry handle and a constant directivity horn. The built-in mixer amplifier section delivers high output to the driver units to develop high SPLs.   Built-in amplifier with mixer section Lightweight ported cabinet Titanium compression driver Mic/line inputs with volume controls Tone controls 35mmØ internal top hat Power supply 230Vac, 50Hz (IEC) Inputs Mic (combo), Line (RCA) SNR 87dB THD 0.1% Dispersion 90° x 60° (H x V) Impedance 4 Ohms Output power: RMS 250W Output power: Max. 500W LF driver 380mm (15") LF driver: Coil size 65mmØ HF driver 50mm Ti compression driver HF driver: Coil size 35mmØ Frequency response 40Hz - 20kHz Sensitivity (1m,1W) 103dB Max SPL 129dB Crossover frequency 3.0kHz Dimensions 420 x 675 x 370mm Weight 17.8kg  

Hybrid B4000 Professional Amplifier - 1500W / Channel into 4 Ohm; 2000W / Channel into 2 Ohm ¿ LCD Front panel display (Temp & Mode of operation) ¿ Stereo, parallel & bridge mode of operation ¿ Balanced line inputs ¿ Full range, Low pass & High pass filters ¿ ACL (Automatic Clip Limiter) ¿ DC Protection ¿ Soft Start ¿ Two speed Fans, Thermal Protection ¿ Inrush Current Protection TECHNICAL SPECIFICATIONS: B600 B900 B1200 B1600 B2200 B4000 8Ohm Setreo Power,RMS/CH 160W 260W 330W 450W 700W 1300W 4Ohm Setreo Power,RMS/CH 240W 400W 600W 700W 1100W 2000W 2Ohm Stereo Power, RMS/CH 550W 750W 900W 1400W 1950W 2200W 8Ohm Bridged Mono Power, RMS 480W 780W 1100W 1400W 2100W 4000W 4Ohm Bridged Mono Power, RMS 1100W 1500W 1800W 2800W 3900W 4400W Frequency Response (+/- 3dB, 1W/8O) 20Hz - 20KHz +/- 3dB 20Hz - 20KHz +/- 1dB Protection DC Protection, Short Circuit Protection, Thermal Protection, Inrush Current Protection, Soft Start Portection, Input & Overload Protection THD+N (20Hz-20KHz) Damping Factor (1KHz @ 8O) >300 >300 >300 >300 >500 >700 Hum & Noise("A" weighted, -80dBW) >95dB >95dB 95dB >95dB >100dB >100dB Input Impedance (Balanced / Unbalanced)

Bring a more professional sound to your mix Adding a dbx® 266xs Compressor/Limiter/Gate to your live sound rig or studio gives you more dynamic control to help create a more polished, professional sound. Having compression in your audio chain gives you the ability to smooth out uneven levels, add sustain to guitars and fatten up your drums. It also makes it easy to bring vocals to the front of your mix - adding greater clarity and making them stand out from the surrounding instruments. dbx knows compressors...after all we invented them! The 266xs is the latest in a long line of the world's most successful compressors from the inventors of the technology. Its patented Overeasy® compression technology provides smooth and musical performance while the AutoDynamic™ attack and release controls, found only on dbx compressors, puts great sound within easy reach. The 266xs can operate in stereo or dual-mono modes, has true RMS power summing and features quality XLR and 1/4" TRS inputs and outputs. It cuts no corners on visual feedback with gain reduction metering and easy-to-read backlit switches. Features: Error proof operation to smooth uneven levels, add sustain to guitars, fatten drums or tighten up mixes New gate timing algorithms ensure the smoothest release characteristics Program-adaptive expander/gates Great sounding dynamics control for any type of program material Separate precision LED displays for gain reduction, compression threshold and gate threshold allow quick, accurate setup Stereo or dual-mono operation Balanced inputs and outputs on 1/4" TRS and XLR connectors Side Chain insert Classic dbx® "Auto" mode Specifications: Input Connectors    1/4" TRS and female XLR (pin 2 hot) Input Type    Electronically balanced/unbalanced, RF filtered Input Impedance    40kΩ balanced/unbalanced Max Input    >+22dBu Balanced or Unbalanced Output Connectors    1/4" TRS, female XLR (pin 2 hot) Output Type    Impedance-balanced/unbalanced, RF filtered Output Impedance    +4dBu: 100Ω balanced, 50Ω unbalanced; -10dBu: 1kΩ balanced, 500Ω unbalanced Max Output    >+21dBu balanced/unbalanced into 2kΩ or greater; >+18dBm balanced/unbalanced (into 600Ω) Sidechain    1/4" TRS Phone, Normalled: Ring = Output (send); tip = Input (return) Sidechain Impedance    Tip = >10kΩ (Input), Ring = 2kΩ (Output) Sidechain Max Input Level    Tip = >+22dBu (Input) Sidechain Max Output Level    Ring = >+20dBu (Output) Compressor Threshold Range    -40dBu to +20dBu Compressor Threshold Characteristic    Selectable OverEasy® or hard knee Compressor Ratio    1:1 to Infinity:1 Compressor Attack Time    Scalable Program-Dependent AutoDynamic™ Compressor Release Time    Scalable Program-Dependent AutoDynamic™ Expander/Gate Threshold Range    -60dBu to +15dBu Expander/Gate Ratio    1:1 to 4:1 Expander/Gate Attack Time    Expander/Gate Release Time    Program-dependent Bandwidth    0.35Hz - 90kHz, +0/-3dB Frequency Response    Flat: 20Hz-20kHz, +0, -0.5dB Noise    THD+Noise    Typically IMD    Typically Dynamic Range    >114 dB, unweighted Interchannel Crosstalk    CMRR    >40dB, typically >55dB at 1kHz Stereo Coupling    True RMS Power Summing™ Power Consumption    15 Watts Maximum Operating Voltage    100VAC Hz; 120VAC 60Hz; 230VAC Hz Operating Temperature    0°C to 45°C (32°F to 113°F) Dimensions    1.75" x 5.75" x cm x 14.6 cm x cm) Unit Weight    4.84 lbs (2.19 kg) Shipping Weight    6.6 lbs (2.99 kg) Reference    0dBu = Vrms 1 year limited guarantee For more info on this product please click here