10pcs lithium battery charging

Buy 10PCS Lithium Battery Charging Module Set 5V 1A TP4056 Charging Modules + 5V 2A for R195.24

10Pcs Mini 1A Lithium Battery Charging Module Board With USB Interface Description: Charging method: linear charge 1% Charging current: 1A adjustable Charge accuracy: 1.5% Input voltage: 4.5V-5.5V Full charge voltage: 4.2V Charging indicator: Red charging green full charge Charging input interface: Mini USB Working temperature: -10C to +85C Reverse: NO Size: 25 x 19 x 10mm Note: Ampere meter can only be connected to 5V input end of the module. It is better that the charging current is 37% of the battery capacity. If you charge to the battery of 1000mAH, current of 400 is enough. The connection wire should not be too long. Make sure the connect point is good. If the input voltage is too high, like 5.2V, the current will be less than 1000mA, it is normal. It is protection function, Auto-substract the charging current to avoid burn damage to chip. Input reverse has no effect on the chip, but the output (battery terminals) reverse will burn chips. Applications: This module is used for single-or multi-section parallel lithium lithium rechargeable battery, charging from the USB port to take power. Package included: 10 x 1A lithium battery charging module

Buy 10Pcs TP4056 Micro USB 5V 1A Lithium Battery Charging Protection Board TE585 Li for R230.77

Description: - 18650 lithium polymer battery charger - TP4056 main-controlled constant current charging, safe, reliable, highest voltage limit 4.2V - For no protection board battery - No reverse polarity protection - Does not require 220V AC access, s afe and reliable - Only require 5V charger and MINI-USB cable access - LED indication: red for charging, green for full charged - Charging cable does not include - 0.3A 0.5A 0.8A third gear current, remove the resistance to change the current Note: When using it, please insert the battery before charging, so that it can avoid instant impact and protect it Package included: 10 x Charging Holder

30Pcs Mini 1A Lithium Battery Charging Board Charger Module USB Interface Description: Charging method: linear charge 1% Charging current: 1A adjustable Charge accuracy: 1.5% Input voltage: 4.5V-5.5V Full charge voltage: 4.2V Charging indicator: Red charging green full charge Charging input interface: Mini USB Working temperature: -10°C to +85°C Reverse: NO Size: 25 x 19 x 10mm Note: Ampere meter can only be connected to 5V input end of the module. It is better that the charging current is 37% of the battery capacity. If you charge to the battery of 1000mAH, current of 400 is enough. The connection wire should not be too long. Make sure the connect point is good. If the input voltage is too high, like 5.2V, the current will be less than 1000mA, it is normal. It is protection function, Auto-substract the charging current to avoid burn damage to chip. Input reverse has no effect on the chip, but the output (battery terminals) reverse will burn chips. Applications: This module is used for single-or multi-section parallel lithium lithium rechargeable battery, charging from the USB port to take power. Package included: 30 x 1A lithium battery charging module

Description:   On-board TP4056 Lithium charge management chip  On-board Mini USB head, can direct connect to PC USB charging This board can power by IN+ and IN- too Reserved TEMP pin connector, can as Lithium temperature detection Input voltage: 4V-8V output max charging current: 1000mA The D1 indicator lights when charging, and the D2 indicator lights when charging is complete PCB board size: 37.3 (mm) x15 (mm)   Package included:   5 x TP4056 1A Lithium Battery Charging Board

Buy 5pcs Geekcreit D1 Mini Single Lithium Battery Charging And Battery Boost Shield for R317.86

Buy 5pcs Geekcreit D1 Mini Single Lithium Battery Charging And Battery Boost Shield Board for R307.48

Buy 5V 2*18650 Lithium Battery Charging UPS Uninterrupted Protection Integrated Boa for R242.54

Buy 20Pcs TP4056 1A Lithium Battery Charging Board Charger Module DIY Mini USB Port for R245.06

Buy XH-M602 Lithium Battery Charging Control Module Overcharge Protection Digital Display High Accuracy for R382.00

Please refer to our website for current and up to date pricing www.lantis.co.za Courier options available for online orders TP4056 5V 1A Lithium Battery Charging Module The TP4056 is a complete constant current / constant voltage linear charger for single cell lithium ion batteries. It's SOP package and low external component count make the TP4056 ideally suited for portable applications. The TP4056 includes current monitor, under voltage lockout, automatic recharge and two status pin to indicat charge termination and the presence of an input voltage. Features: Programmable charge current up to 1000mA No Mosfet, sense resistor or blocking diode required Complete linear charger in SOP-8 package for single cell lithium ion batteries Constant current / constant voltage Charges single cell Lithium Ion batteries directly from USB port Preset 4.2V charge voltage with 1.5% accuracy Automatic recharge

Buy 10pcs 3.7V 9V 5V 2A Adjustable Step Up 18650 Lithium Battery Charging Discharge Integrated Module for R350.00

10pcs 3S 12V 10A 18650 Lithium Battery Charger Protection Board Module 11.1V 12.6V

Features: Suitable range: For nominal voltage 3.6V 3.7V lithium battery(Including 18650,26650, lithium polymer batteries) Product Size: 64mmx20mmx3.4mm Material:Metal Charging voltage: 12.6V Maximum output current: 20A Maximum output power / charging power: 252W Note: 1. Strictly according to the diagram wiring: 0V/4.2V/8.4V/12.6V,Otherwise it will cause damage to the chip. 2. After connection,it need to first charge activation, then will have the output. 3. Do not mix the good battery and poor battery to use.The internal resistance of 3 battery capacity are closer will be better.Please buyers know the     professional knowledge of this module before buying Package Included: 10 x PCB Protection Board