Sync wireless

Yongnuo YN568EX III 2.4G TTL High Speed Sync Wireless Flash Speedlite For Canon Nikon

Buy Yongnuo YN568EX III 2.4G TTL High Speed Sync Wireless Flash Light Speedlite For Nikon Camera for R3,230.00

Buy Yongnuo YN568EX III 2.4G TTL High Speed Sync Wireless Flash Light Speedlite For Nikon Camera... for R2,909.00

Features: Supports C's optical transportation wireless master flash: In the optical transportation wireless flash shooting, the YN568EX III can be used as a master unit to trigger YONGNUO and C's EX series speedlite(except the YN585EX), and supports 4 channels, realize wireless TTL, manual flash and stroboscopic flash. Compatible with C and N's optical transportation wireless slave flash: One YN568EX III can respectively accept the master unit of YN600EX-RT II, YN568EX II, YN568EX III, 600EX(II)-RT, 580EX II, SB-910/900/800/700, Nikon internal flash and for Canon commander and wireless signal of 7D/60D/600D, realizes external TTL, manual flash and stroboscopic flash. GN58@ISO100, 105mm, and supports automatic & manual zooming(24-105mm): High index TTL flash, supports TTL, M, Multi flash; and supports supports automatic & manual zooming, the focal length can be varied between 24-105mm. Supports high speed sync(HSS) flash and with high speed recycling(2s) system: The YN568EX III can synchronize with all shutter speeds, realize TTL and manual flash, 1/8000s maximum shutter sync; and the recycling time for full output just takes 2 seconds. Multiple trigger modes, automatic settings saving and custom setting supported: YN568EX III can be triggered by the camera set-top, PC synchronization trigger and wireless optical trigger off the camera. Supports firmware upgrade: The YN568EX III is equipped with USB interface, you can download the latest firmware from YONGNUO official website to upgrade the speedlite. Equipped with large-size LCD display and 2.5mm PC interface, and supports the battery remaining power real-time display, convenient to use. Specifications: Circuit design: Insulated Gate Bipolar Transistor (IGBT) Guide No.: 58 (ISO 100, 105mm) Flash mode: TTL, M, Multi Trigger mode: On-camera, Sc, Sn, S1, S2 Zoom range: 24, 28, 35, 50, 70, 80, 105mm Vertical rotation angle: -7~90 degrees Horizontal rotation angle: 0~270 degrees Power supply: 4 x AA batteries(not included; Alkaline or NI-MH are usable) Lighting times: 100~1500 times (with AA alkaline battery) Recycle time: Approx. 2s (with new AA alkaline battery) Color temperature: 5600k Flash time: 1/200s~1/20000s Flash control: 8 levels of output control (1/128~1/1), 29 levels of fine tuning in total External interface: hot shoe, PC port, USB port Wireless triggering distance: 20~25m indoors, 10~15m outdoors Additional features: Master flash, High speed sync, Rear-curtain sync, FEC, FEB, FE lock, electric zoom of flash head, sound prompt, auto-save setting, PC sync, USB port, power saving mode, overheating protection, advanced options setting. Item Size: 6.2 x 7.2 x 18.8cm/ 2.4 x 2.8 x 7.4in(Extended state) Item weight: 383g/ 13.5oz Package size: 21.5 x 9.5 x 8cm / 8.5 x 3.7 x 3.1in Package weight: 565g / 1.2lbs Compatible with: Hot shoe TTL mode: For Nikon D7400 D7300 D7200 D7100 D5600 D5500 D5400 D5300 D5200 D5100 D5000 D3500 D3400 D3300 D3200 D3100 D3000 D700 D800E D800 D810 D610 D750 D300s D200 D100 D80 D90 D40 D40x D60 D4 D3. Wirelss TTL Slave mode: For Nikon Commander SU-800 For Nikon SB-910, SB-900, SB-800, SB-700, Commander SU-800 Camera with CLS i-TTL system: D4, D3x, D3s, D3, D2x, D700, D300s, D300, D200, D7000, D90, D80 For Canon 7D 6D 600D 650D For Canon Flash 580EX II For Canon ST-E2 Commander Package Included: 1 x YN568EX III Speedlite 1 x Mini Stand 1 x Protecting Bag 1 x User Manual(English & Chinese)

Wireless Portable Bluetooth Speaker 'Volx' - 3+5W Speaker, Subwoofer, Micro SD Card Slot, FM Radio, USB, Line In, Hands-Free       'Volx' Wireless Bluetooth Speaker with Micro SD card slot supports, FM radio, USB and audio line in to produces hi fidelity sound at up to 90 decibels from a number of devices for up to 8 hours of usage. 90DB Wireless Speaker A stylish speaker with 90db Hi-Fi sound is hard to come by but we have been able to source this outstanding speaker called the 'Volx', which is available now at an incredible wholesale price so you can get your party started indoors or outside without breaking the bank. With a built in speaker and a mini sub-woofer you get a well rounded sound with a good range that won’t sound tinny and a mAh battery allows for up to 8 hours of play time from a full charge. The speaker has Bluetooth, USB, micro SD card and 3.5mm line in support so you can play music from a range of devices thanks to the different connectivity options that lets you use this speaker with or without wires. Its great for BBQ's, pool parties, beach parties, Christmas parties, office parties or any other event where you need mobile portable speakers with good quality output. Hands Free with Bluetooth Sync If you sync the speaker to your phone you can use it as a hands free kit so you won’t miss a call if you’re playing your music, you could even use it for a conference call with a suitable phone. The responsive buttons let you easily adjust the volume, skip tracks and redial the last number while the LCD display lets you see all that is happening, reports the battery status and the phone number when you receive a call so you can tell who’s calling you. At a Glance... SNR: About 90db Speaker Power: 5W+3W 66mm Subwoffer Up to 8 Hours Playing Time Great Connectivity Manufacturer Specifications General Material: ABS Plastic with rubber oil Bluetooth Version: 3.0+EDR Distance: 10 Meters Max Speaker Power: 5W+3W Distortion: Up to 0.3% Transmitting Frequency: 60 to 18 KHZ SNR: About 90db Sensitivity: 80db Music Formats: MP3, WMA, WAV, APE, FLAC Power: Build in mAh Li-polymer battery Input: DC5V/MA Operating Voltage: 3.3V to 4.2V Charging Time: 5 Hours Playing Time: Up to 8 Hours FM Radio FM Frequency 87.5 to 108MHz Micro SD Card/USB: Support up to 32GB Hand-free when answering calls (with MIC) Phone number reporting and phone redial Support LCD display show Time, Alarm clock Button:”+”/”-”button, Play button, Clock button, Bluetooth button, FM button, on/off button Ports 3.5mm Line in Micro SD Card up to 32GB USB DC 5V in Dimensions Main Product Dimensions: 210x210x43 mm (L x W x D) Main Product Weight: 660g Package Contents Bluetooth Speaker 3.5mm Cable USB Cable User Manual Click on this to see the rest of my exciting listings!  

Wireless Trigger Set - RF605 Features: Flash Grouping (6 Groups: A, B, C, D, E, F) LCD Display Shortcut Keys Compatible with RF-602/RF-603/RF-605 and YN560-TX Shutter Release Remote Flash Wake Up 2.4GHz Signal (100m Triggering Distance) ​Specifications: Batteries: 2 x AAA (per unit) Channels: 16 Flash Groups: 6 (A to F) Shutter Release: Half & Full Press Sync Port: Standard PC Flash Sync: 1/320th Size: 85x41x35mm In the box: 2 x Transceivers 1 x Manual 1 x Operating Manual Batteries (Please specify for Canon/Nikon)

Wireless TTL Transceiver 622 Yongnuo's First Wireless E-TTL Flash Trigger YN-622 C is Released now, it's designed for Canon Camera. Using Digital FSK 2.4GHz frequency band with 7 channels, it has three modes; E-TTL (II), Manual and Multi, and it can fire flashes at 360 degree direction, the operating range is 100 metres. It supports FEC, FEB, FEL, High-speed Sync, 1st. Curtain, 2nd. Curtain, Modeling flash, ETTL II Group Ratio (ALL/A:B/A:B C), Manual/Multi group (ALL/ A:B/ A:B:C), Manual and Multi mode, Auto Zooming, Manual Zooming, AF Lamp. Suitable for camera: 1. The EOS DSLR camera with external flash control menu: Canon 5D Mark II, 5D Mark III, 1Ds Mark III, 1D Mark IV, 1D Mark III, 7D 60D 50D 40D 450D 500D 550D 600D 650D 1000D 1100D;2. The EOS DSLR Camera without external flash control manual: Canon 5D 10D 20D 30D 300D 350D 1D 1D Mark II Suitable for flash: Compatible ETTL Flash: (It suport wireless remote control through camera menu) Canon 600EX (RT), 580EX II, 430EX II, 320EX, 270EX II,Yongnuo YN-565EX C, YN-468 II C, YN-467 II C, YN-465 C (Our yongnuo flash units don't support HSS Function); Note: 430EX and 580EX or other parts of flash is not supported remote control via the camera menu, you need to manually set the flash parameters. (Please specify for Canon/Nikon)

WIRELESS BLUETOOTH SPEAKER - BUILT-IN-MIC, NFC, 32GB TF CARD SLOT, 3D SOUND TECHNOLOGY, 4 HOURS PLAY TIME, FM RADIO - B106 Key Features... Enjoy your favorite music any time of the day with this portable Bluetooth speaker Weighing just 0.45KG this portable speaker can be efficiently carried around anywhere you go Latest 3D sound technology delivers true audiophile-grade sound quality With its stylish and modern design this NFC speaker is the perfect electronic accessory for inside and outside use alike PORTABLE BLUETOOTH SPEAKER Coming with the latest 3D sound technology this wireless speaker is guaranteed to deliver an absolutely stunning audio experience that suits the needs of any audiophile out there. Simply pair this Bluetooth speaker with your smartphone and you will be able to listen and share your favorite tracks straight from your music library. Supporting NFC, this portable speaker further enhances your user experience as now you will be able to simply put your NFC supported smartphone on top of the speaker which will then sync automatically with it – allowing you to listen to all the fine tunes saved on your smartphone. Packing an epic 1200mAh battery, this NFC Bluetooth speaker is capable of offering a stunning 4 hours play time on one single charge – providing you with plenty of time to enjoy your favorite songs while on the move. Additionally, this wireless NFC speaker also supports FM frequencies, giving you the option to listen to the latest songs, news programs, weather forecasts, and a whole lot more no matter the time of the day. The next time you head out on a fun packed day trip with your friends or family you can leave your house with confidence as, with this Bluetooth speaker at your side, you can be assured that you and your loved ones can enjoy some fine tunes no matter where you are. Manufacturer Specifications General Materials: Plastic shell with stripe Bluetooth 3.0 Support: A2DP, AVRCP and HSP protocol Horn power: 3W x2 SNR: Around 85DB Frequency Range: 40HZ to 20KHZ Charge Cycle: more than 500 Battery: 5V 1200mAh Working time: up to 4 hours Charging time: about 3.5 hours Input voltage/current: 5V/1A Micro SD card: support up to 32G Support format: MP3，WMA FM Radio NFC Touch Function Built in Microphone Handsfree Voice Calls Ports Micro SD card Micro USB USB AUX IN Dimensions Main Product Dimensions: 230x 62x 62mm (L x W x D) Main Product Weight: 449g Package Contents Bluetooth Speaker USB Cable AUX IN Cable User Manual Battery

Wireless Studio Trigger Set - 4 Channel - AC Trigger studio flashes remotely No sync cables necessary Four Channel AC version 1xTransmitter 1x Receiver

Free shipping for orders over R1500.00  Wireless Trigger Set - RF605 C3 Features Flash Grouping (6 Groups: A, B, C, D, E, F) LCD Display Shortcut Keys Compatible with RF-602/RF-603 and YN560-TX Shutter Release Remote Flash Wake Up 2.4GHz Signal (100m Triggering Distance) ​Specifications: Batteries: 2 x AAA (per unit) Channels: 16 Flash Groups: 6 (A to F) Shutter Release: Half & Full Press Sync Port: Standard PC Flash Sync: 1/320th Size: 85x41x35mm In the box: 2 x Transceivers 1 x Manual 1 x Operating Manual Batteries

cash Converters Arbour Crossing: Sync by 50 Cent headphones for sale. Professional wireless headphones. Get 5% discount if you mention that you saw the advert online. Call or whatsapp

Free shipping for orders over R1500.00  Description Wireless Trigger — TR-611 TTL HSS Canon (or specify TR-612 for Nikon) Wireless Trigger — TR-611 TTL HSS Canon (or specify TR-612 for Nikon) Remote Control for Jinbei HD 610 HSS battery Flash HSS and TTL & can disassemble the sync on 1st, 2nd fastening curtain Three groups 16 Channel Master/slave modes

Introducing the revolutionary 100M wireless Multi-barrier infrared beam with 10 active beams.  This beam is typically used over large areas with a transmission range of up to 500M.      The installation is effortless as no sync wires are necessary.  Synchronization is done wireless through the top and bottom beams.  The laser alignment tool is available to align the beam accurately. In addition, a diagnostic mode for precision alignment and easy fault finding. The beam comes with a remote that allows you to control activation and sensitivity of the beam.  The beams are easily interfaced to any alarm panel This product is typically designed, developed and manufactured in SA.  For assistance with installation we can recommend and installer. This price includes 2 beams and a remote control.  The power supply is not provided but may be purchased separately. Alternatively solar panels may be used to power the beam. Added extras include:   10W Solar Braket 10W Solar Panel Adjustable mounting brackets Water Proof Encloses for battery supply Plug in Diagnostics board Technical Features:   Used on 12Vdc or 24Vdc power supplies Wide voltage range: 10-18V ac/dc Interface to any alarm panel either wired or through a interface receiver 4 Channel  frequencies Adjustable response time:.3s to 2s Remote control programming IP54 rating Dimensions: 150cm height x 4cm (10 beam) Dimensions: 90cm height x 4cm (6 beam)

Free shipping for orders over R1500.00  Jinbei Wireless Trigger Set - TR-A8 (JB) Description New TR-A8 flash trigger adopts advanced MCU control technology. It is with hig anti-jamming capacity and low power consumption. The response speed is faster. It applies AAA 1.5V batteries and has added power switch to extend service life. 16 independent channels, effective responsive distance can reach 30 meters and may adapt to different shooting demands. Maximum   sync speed   - 1/250s Package Content 1 x Transmitter 1 x Receiver 1 x Connecting cable   Original package Camera and flash are not included  

  Wireless broadcasting content from smart phone / tablet / portable to HD display device. Support mirror content and wireless Wi-Fi stream, no APPLICATION required. Audio input, picture, text on TV and projector via HDMI port. Compatible with DLNA / Mirracast mode, you can change the mode to another device. Easy to use, supports IOS and Android, supports auto upgrade online. specification: RAM: 256 MB System supports Android 4.4 or higher. IOS 8 or higher. Windows 8.1 or higher. MAC 10.9 or higher OS: Linux Transmit Protocol: Miracast / DLNA / Airplay image Youtube Miracast and airplay image APP Miracast and airplay Resolution: 480 P / 720 P / 1080 P MPEG-2, MPEG-4, DIVD / DIVX, real 8/9/10, RM, RMVB, PMP, FLV, MP4, M4V, VOB, WMV, 3GP, MKV, etc. AVI, MPEG-2, MPEG-4, DIVD / DIVX, Real 8/9/10, RM, RMVB, PMP, FLV, MP4, M4V, VOB, WMV, 3GP, MKV, etc. Audio format: MP1, MP2, MP3, WMA, OGG, AAC, M4A, FLAC, APE, AC3, AMR, DTS, RA, WAV, etc. Image Format: JPG / BMP / PNG / GIF Port: DC 1 X Micro USB, 5 V / 450mA Press the button to switch from DLNA to Miracast, hold to reset. Wi-Fi 8188 Module

 Yongnuo YN-622N-TX Wireless TTL Flash Controller/Transmitter + 1x YN-622N Flash Transceiver Kit for Nikon   Specifications: The YN-622N-TX transmitter acts as a master control unit to the popular YN-622N  I-TTL and Remote Manual transceivers, providing more functions and a far more user friendly built-in LCD user interface. You can use YN-622N-TX and YN-622N Transceiver as Flash Trigger system to fire flash. YN-622N-TX Features: 3 Groups (A/B/C) Mix TTL, Remote Manual, and SuperSync Groups Sync mode (front-curtain sync, rear-curtain sync, Hi-speed sync (Auto FP)) Max Sync. Speed: 1/8000s Trigger Interface: Hot shoe, PC Individual 1/3rd stop Manual Power and FEC adjustment Remote Flash Zoom in 3 groups, and Auto Zoom 2nd Curtain Sync, HSS, SuperSync USB port for Firmware Updates AF Assist Light Remote Shutter Release Function Dedicated Buttons for Fast Adjustments Battery Level Indicator 2.5mm shutter release interface (We have two cables, one is for N1, other is for N3) PC Interface (You can buy RF-602 PC/PC to connect it with your camera) 7 Channels Improved Stability and Transmission Speed SuperSync Manual Timing Adjustment by Group Flash Value Lock function (FVL) Modelling Flash & Red-Eye Reduction flash Settings Saved Automatically Up To 100M Range YN-622N Features: YN-622N i-TTL wireless transceiver is a high performance 2.4G wireless flash trigger designed for Nikon users. Different photographic effects can be produced through setting the flash at 360 degrees. It supports i-TTL and manual flash, front-curtain sync, rear- curtain sync and high-speed sync(Auto FP), the highest sync speed is 1/8000s*. It can remote change flash exposure compensation or flash output of each group, supports different flash modes. Supports the transmitter installed i-TTL flash, in addition, it supports the master unit on transmitter sets the parameters of each group. This product is a wireless transceiver design, the distance of remote control reaches 100M, supporting 7 wireless channels and A/B/C three groups, and with AF assist beam emitter function. Function: Compatible flash mode: I-TTL, Manual flash Compatible Shutter sync: front-curtain sync, rear- curtain sync and high-speed sync(HSS/FP), the highest sync speed is 1/8000s* Support remote set the parameters of flash through the transceiver (Remote Control Mode) Support E-TTL/Manual/Repeating flash mode mix using(Mix Control Mode) Support the flash installed on transmitter(on-top flash)and supports i-TTL function Support the use of master unit on transmitter sets the parameters of each group(Master Control Mode) Support FEC, FVL function Support modelling flash and red-eye reduction flash Support flash zooming (auto) Built-in AF assist beam emitter (AF Lamp) Settings saved automatically Compatible with Yongnuo/ Nikon series flashes Support PC port triggering strobe flashes PC port support front/rear curtain sync and high-speed sync(Super Sync)function Support single-contact of camera & flash triggering (max sync speed is 1/250s) YN622N-KIT  Suitable for (Camera): Nikon: D70 D70s D80 D90 D200 D300s D600 D700 D800 D3000 D3100 D3200 D5000 D5100 D5200 D5300 D7000 D7100 Flash compatible (i-TTL): (You should use it with YN-622N together) A: ETTL Flash: (It suport wireless remote control through camera menu) ---Nikon SB-910, SB-900, SB-800, SB-700, SB-600, SB-28, SB-27, SB-26, SB-25, SB-24 ---Yongnuo Flashes Nikon version: YN-568EX, YN-565EX, YN-500EX, YN-468II, YN-467II, YN-465 ---Other brand flashes working with Nikon system: Metz, Sunpak, Oloong, Triopo B: Other Flashes: (Not support TTL function or HSS) ---Yongnuo YN-560III, YN-560II, YN-560EX, YN-560, YN-460II, YN-460 ---Pentax AF-540 FGZ, AF-360 FGZ, AF-400 FT, AF-240 FT ---Sigma EF-500 DG Super, EF-500 DG ST, EF-430 ---Other brand flashes not for Nikon: Metz, Sunpak, Oloong, Triopo Package including: 1 x YN-622N-TX Controller 1 x YN-622N II Single Transceiver 1 x LS-2.5/N1 Shutter Connecting Cable 1 x LS-2.5/N3 Shutter Connecting Cable 2 x Manual in English I ONLY POST TO ADDRESSES IN SOUTH AFRICA - NO INTERNATIONAL SALES

 1 x Yongnuo YN-622C E-TTL Wireless Flash Trigger Transceiver for Canon Yongnuo First Wireless E-TTL Flash Trigger YN-622 C is Released now, it's designed for Canon Camera. Using Digital FSK 2.4GHz frequency band with 7 channels, it has three mode, E-TTL (II), Manual and Multi, and it can fire flashes at 360 degree direction, the operating range is 100 metres. It supports FEC, FEB, FEL, High-speed Sync, 1st. Curtain, 2nd. Curtain, Modeling flash, ETTL II Group Ratio (ALL/A:B/A:B C), Manual/Multi group (ALL/ A:B/ A:B:C), Manual and Multi mode, Auto Zooming, Manual Zooming, AF Lamp. Main function: a), Support Full ETTL Pass-through function when on camera 1), Mount one YN-622C transceiver into the hot shoe of camera, and mount other transceiver into the hot shoe of flash, you can trigger the flash at any direction in TTL, Manual or Multi mode. 2), Mount flash on hot shoe of YN-622C transceiver on camera, mount the second flash on other transceiver, both of flashes can be trigger at any direction in TTL, Manual or Multi mode. Note: Speedlites on hot-shoe of transmitter support ETTL II / Manual / Multi b), Shutter Sync 1), High-speed Synchronous The max. sync speed is 1/8000s, but some camera is just 1/4000s, and for those cameras and flashes who don't suport HSS, the sync. speed is just 1/250s or less, different cameras have different Sync speed. 2), 1st. Curtain Sync 3), 2nd. Curtain Sync. c), Remote Control Function The parameter of flashes on hot shoe of receivers can be set up remotely through the camera manu directly. d), Supporting mixed mode. With this function, you can trigger remote speedlites in different modes, set up one YN-622C transceiver on hot shoe of flash in TTL mode, set up the second YN-622C transceiver on hot shoe of flash in manual mode, and the third YN-622C transceiver on hot shoe of flash in multi mode, all three flashes can be fired via the transceiver on hot shoe of camera, this mode is especially useful for those camera bodies without a built-in flash menu. (you need to set the parameters on speedlites) Note: Only FEC, FEB, Ratio and Shutter sync can be set in the camera side. Manua and Multi output need to be set on the flash speedlite. e), Work with Strobe Studio flash light in HSS function You can buy a PC Sync Cable RF-603 6.35mm cable to connect the transceiver with the studio flash, and then youcan use the non-high speed sync flash torealize hihger syand then you can use them together in HSS. The max. trigger voltage is less than 300 Voltage. Note: The PC port is for output using only. f), Awaking function When half-pressing the shutter button of the camera, the hot shoe flash on the receiver will be awakened. (for those flash has wake up function) g), Zoom Function Zoom Automatic: length will be charnged depanding on the changes of lens. Zoom Manual: Zoom length is within 24 - 105mm Zoom Lock h), Support Single-contact of camera and flash triggering (the max. Sync. speed is 1/250s) You can use it with Nikon camera or Nikon flash, but you just need to set up YN-622C in manual mode. i), Flash Fire Ratio with ETTL You can set up different flash fire ratio and FEC for those flashs on hot shoe of receiver. j), Support 2pcs AA batteries, (1.2v rechargeable battery), Stand-by time is 60hours. k), Dimension: 89.5 * 53 * 39MM, net weight is 78g. Note: There is a PC Sync port for YN-622C transceiver, you can use RF-602 PC / PC Cable to connect it with flash. Suit for: Camera: A: The EOS DSLR camera with external flash control menu: Canon 5D Mark II, 5D Mark III, 1Ds Mark III, 1D Mark IV, 1D Mark III, 7D 60D 50D 40D 450D 500D 550D 600D 650D 1000D 1100D B: The EOS DSLR Camera without external flash control menu: Canon 5D 10D 20D 30D 300D 350D 1D 1D Mark II If you use the Canon Speedlite 430EX or 580EX (not mark II) or an older camera without the Flash Control menu then you will have to make settings by hand. Older cameras that don’t have the same Flash Control menu include the original 5D, 10D, 20D, 30D, 300D, 350D, 1D and 1D Mark II. Flash: Compatible ETTL Flash: (It suport wireless remote control through camera menu) Canon 600EX (RT), 580EX II, 430EX II, 320EX, 270EX II Yongnuo YN-565EX C, YN-468 II C, YN-467 II C, YN-465 C (Our yongnuo flash units don't support HSS Function) Note: 430EX and 580EX or other parts of flash is not supported remote control via the camera menu, you need to manually set the flash parameters. Q&A How does wireless E-TTL ratio control work? Set the desired group – A, B or C – on each of your YN-622C transceivers On your Canon EOS DSLR, hit [Menu] > Flash control > External flash func. setting > Wireless func. > Enable. If you have a flash on top of your on-camera YN-622C unit, select Master flash > Enable if you want it to fire, otherwise it won’t. It will behave like an off-camera flash in group A. In the External flash func. setting > Channel menu, pick your channel (1-4). The YN-622C transceivers can actually be set to more channels than the menu supports. To pick channels 5, 6 or 7, select it directly using the buttons on the on-camera YN-622C transceiver. Pick your ratio control mode from the External flash func. setting > Firing group menu. You have the choice of All (A+B+C), A:B or A:B C. In “All”, there are no ratios and each flash fires at the same power level (this is the same as having ‘Wireless func.’ disabled). In the other modes you can select ratios from 8:1 to 1:8 for the groups in 1/2-stop increments. Check your camera user manual for more details. Wireless ratio control in the Flash control menu with the YN-622C How does wireless manual control work? The set-up is similar to E-TTL ratios, but in External flash func. setting > Flash mode you pick “Manual” instead of “E-TTL II”. You will then be able to set each of your independent flash groups – A, B or C – to manual power levels from 1/1 to 1/128. Wireless manual control in the Flash control menu with the YN-622C Package including: -1 x YN-622C transceivers. (DON'T come with retail packing,Since Yongnuo not launch 1PC retail box.We will send in sealed bubble bag.) Note: Camera & Flash & Batteries not included

*Fully Support TTL Autoflash, 1/8000s High-Speed Sync, Multi Flash, Manual Flash, Flash Exposure Compensation, TCM Transform Function, Magnfication Function, One-Shoot & Multi- Shoot Setting, Group Modeling Lamp Control, Group Zooming, Adjusting All Groups' Output Value Simultaneously, etc *Add 01 to 99 Wireless ID settings,Which Can Only Achieve Triggering When the channels and Wireless IDs of the Master and Slave Unit are Set to the Same,Avoiding Signal interference effectively *11 Customizable Functions,Extra-large LCD panel, 5 group buttons and 4 function buttons offer convenient manipulation *Built-in Godox 2.4G Wireless X System & Versatile Using Methods:e.g. As a wireless Godox Trigger for camera flash,outdoor flash and studio flash; As a Wireless Speedlites Trigger;As a Wireless Shutter release Trigger;As a flash(without Godox X system) trigger with 2.5mm Sync Cord Jack *Godox XPro-S High Speed Sync Flash Transmitter is compatible camera: Sony series cameras (TTL autoflash) Support for the cameras that have PC sync socket More Feautures FE lock 11 Customizable Functions Manual Flash 1/1 - 1/256 Power Modeling Light Status Control Adjusts the Flash Zoom Coverage for Each Group Selective Transmission of Data Conserves Energy and Battery Life Magnification Function Displays Details of Each Group Settings Global Adjustments to Exposure Values for Multi-Group in M Mode 5 Group Buttons and 4 Function Buttons Offer Convenient Manipulation Support Type-C USB Firmware Upgrade and Wireless Triggering by 2.5mm Sync Cord Jack Compatible Camera: Sony series cameras (TTL autoflash) Support for the cameras that have PC sync socket Flash Exposure Control TTL Autoflash: Sony Manual flash mode: Yes Multi (Stroboscopic) flash mode: Yes Function HSS (High-speed sync): Yes Second-Curtain Sync: Yes Flash exposure compensation: Yes,3 Stops in 1/3 stop increments Flash exposure lock: Yes Auto Focus Assist: Yes Modeling Lamp Control: Control the modeling lamp by the flash trigger Beeper: Control the sound of the flash trigger Wireless Setting: The receiver end can control the camera shooting through the 2.5mm sync cord jack ZOOM setting: Adjust the ZOOM coverage value from the transmitter TCM function: Transforms the TTL shooting value into the output value in M mode Firmware upgrade: Upgrade through the Type-C USB port Memory function: Settings will be stored 2 seconds after last operation and recover after a restart Wireless Flash Wireless Signal Range: >328 feet / >100 Meters Remote System: 2.4GHz Modulation Mode: MSK Channels: 32 Wireless ID: 01-99 Groups: 16 Dimensions: 3.5x2.3x2.0"/ 90x58x50mm Display: Large LCD panel with customizable backlight PACKAGE CONTENTS: 1* Godox Xpro-S 1* Product Manual 1* CONXTRUE USB LED Free Gift

SINGLE Yongnuo YN-622C Wireless e-TTL Flash transceiver for Canon NEW Yongnuo YN-622C Wireless e-TTL Flash transceiver / Flash Trigger Supports High-speed Sync HSS for Canon Flash Speedlight to 1/8000s Features: Recommended use with YN-568ex HSS flash Speedlight for Canon Specification: Using Digital FSK 2.4GHz frequency band with 7 channels, it has three modes: i-TTL, Manual and RPT, and it can fire flashes at 360 degree direction, the operating range is 100 metres. It supports FEC, FVL, High-speed Sync, Front Curtain, Rear Curtain, modelling flash, i-TTL, Manual/RPT, Manual mode, Auto Zooming, AF Lamp. Main function: a) Support Full I-TTL Pass-through function when on camera 1)  Mount one YN-622N transceiver into the hot shoe of camera, and mount other transceiver into the hot shoe of flash, you can trigger the flash at any direction in TTL, Manual or RPT mode. 2)  Mount flash on hot shoe of YN-622N transceiver on camera, mount the second flash on other transceiver, both of flashes can be trigger at any direction in TTL, Manual or RPT mode. Note: Speedlight on hot-shoe of transmitter support i-TTL/ Manual / RPT b)  Shutter Sync 1)  High-speed Synchronous. The max. sync speed is 1/8000s, but some camera is just 1/4000s, and for those cameras and flashes who don't support HSS, the sync. speed is just 1/250s or less, different cameras have different Sync speed. 2)  Front Curtain Sync 3)  Rear Curtain Sync. c)  Remote Control Function The parameter of flashes on hot shoe of receivers can be set up remotely through the camera manual directly. d)  Supporting mixed mode. FEC; FVL Ratio and Shutter sync can be set in the camera side. Manual and Multi output need to be set on the flash Speedlight. e)  Work with Strobe Studio flash light in HSS function f)  Awaking function g)  Zoom Function h)  Support Single-contact of camera and flash triggering (the max. Sync. speed is 1/250s) i)  Flash Fire Ratio with e-TTL j)  Support 2pcs AA batteries, (1.2v rechargeable battery)  Stand-by time is 60hours. k)  Dimension: 89.5 * 53 * 39MM, net weight is 78g. Note: There is a PC Sync port for YN-622N transceiver, you can use RF-602 PC / PC Cable to connect it with flash. Specifications:  System type - Digital FSK 2.4GHz wireless transceiver Operating range  - 100M Channels - 7 Groups - 3Groups (A/B/C) Flash mode - i-T TL; Manual mode; RPT flash mode Sync mode - Front-curtain Sync, Rear-curtain Sync, High Speed Sync(Auto FP) Highest sync speed  - 1/8000s Support function  - FEC; FVL; i-TTL; Manual / RPT flash mode; flash zooming; AF assist beam emitter; PC port; triggering strobe flashes; Front curtain, Rear curtain/HSS; LCD Live view triggering; single-contact of camera; flash triggering Input - Hot-shoe (TTL, main contact) Output - Hoe shoe; PC port Applicable battery - AA*2 (support 1.2 rechargeable battery) Stand-by time - 60h Dimensions  - 89.5*53*39mm Weight - 78g  Note: There is a PC Sync port for YN-622C transceiver, you can use RF-602 PC / PC Cable to connect it Suitable for: Camera: A: The EOS DSLR camera with external flash control menu: Canon 7D, 7D Mark II, 6D, 6D Mark II, 5D Mark II, 5D Mark III, 5D Mark IV, 1Ds Mark III, 1D Mark IV, 1D Mark III, 7D 60D 50D 40D 450D 500D 550D 600D 650D 700D 1000D 1100D 1200D 1300D B: The EOS DSLR Camera without external flash control manual: Canon 5D 10D 20D 30D 300D 350D 1D 1D Mark II Flash: Compatible ETTL Flash: (It support wireless remote control through camera menu) Canon 600EX (RT), 580EX II, 430EX II, 320EX, 270EX II Yongnuo YN-565EX C, YN-468 II C, YN-467 II C, YN-465 C Note: 430EX and 580EX or other parts of flash is not supported remote control via the camera menu, you need to manually set the flash parameters. Package including: 1x RF-622 C transceiver 1x Flash Stand 1x Instruction in Chinese and English WE ONLY POST TO ADDRESSES IN SOUTH AFRICA - NO INTERNATIONAL SALES  

The wireless transceiver is a high performance 2.4G wireless flash trigger designed for Nikon users It can remote change flash exposure compensation or flash output of each group, supports different flash mode mix Compatible shutter sync: front-curtain sync, rear-curtain sync and high-speed sync (HSS / FP), the highest sync speed is 1 / 8000S PC -port support front-rear curtain sync and high-speed sync (super sync) function support single-contact of camera & flash triggering Support remote set the parameters of flash through the transceiver (remote control mode) support I-TTL / manual / repeating flash mode mix using Features: Compatible flash mode: i-TTL, manual flash, Compatible Shutter sync: Front-curtain sync, rear-curtain sync and high-speed sync (HSS/ FP), the highest sync speed is 1/ 8000s. Support FEC, FVL function, Support modeling flash and red-eye reduction flash, Support flash zooming (auto), Built-in AF assist beam emitter (AF Lamp), Settings saved automatically, Compatible with Yongnuo/Nikon series flashes. Support PC port triggering strobe flashes. Specifications: System Type: Digital FSK 2.4GHz wireless transceiver, Distance: 100m, Channel: 7, Flash Mode: i-TTL manual flash, SYNC Mode: Front-curtain sync, rear-curtain sync, hi-speed sync (Auto FP), Group Control: 3Groups (A/ B/ C), Sync Speed: 1/ 8000s, Input: Hot Shoe, Output: Hot shoe, PC port, Compatible type of flash: Hot-shoe flash, Strobe flash, Battery: AAx2 (support 1.2V rechargeable battery), Standby Time: 60h, Dimension: 89.5 x 53 x 39mm, Weight: Approx. 220g, 100% Brand New. Suitable for: Compatible camera list: Nikon: D70 D70S D80 D90 D200 D300 D300S D600 D700 D800 D3000 series/D5000 series/D7000 series Compatible i-TTL flash list: Yongnuo: YN465N YN467N YN-468N(II) YN565N YN568N. Nikon: SB-400 SB-600 SB-700 SB-800 SB-900 SB-910. Package Includes: 1 x Transceivers, 1 X English Manual, 1 X Original Packing.

Supported flash mode: i-TTL, manual flash. Support modeling flash and red-eye reduction flash. Built-in AF assist beam emitter(AF lamp). Support exposure compensation, flash value lock function(FVL). Settings saved automatically. Yongnuo YN-622N-TX TTL Wireless Flash Controller + 2PC YN-622N Trigger for Nikon Wireless Flash Controller: Specifications: System type: Digital FSK 2.4GHz wireless controller Distance: 100m Channel: 7 Flash mode: i-TTL, manual flash Sync mode: front-curtain sync, rear-curtain sync, hi-speed sync(auto FP) Groups: 3 groups(A/B/C) Sync speed: 1/8000s Input: Hotshoe Output: Hotshoe, PC port Shutter release interface: 2.5mm shutter release interface USB firmware upgraded: Support AF assist beam emitter: Support Applicable battery: 2 * AA battery(Support 1.2V rechargeable battery)(Batteries not included) Standby time: 120 hours 1 * N1 Shutter Cable 1 * N3 Shutter Cable 1 * User ManualEnglish & Chinese) Transceiver: Compatible with Yongnuo / Nikon series flashes. Support PC port triggering strobe flashes. PC port support front/rear curtain sync and high speed sync(super sync) function. Support single-contact of camera & flash triggering. (max sync speed is 1/250s) On compatible cameras/flash with TTL function. Compatible camera list: For Nikon D70/D70S/D80/D90/D200/D300/D300S/600/D700/D800/D3000 series/D5000 series/D7000 series Compatible i-TTL flash list: For YN465N/YN467N/YN-468N(II)/YN565N/YN568N For Nikon SB-400/SB-600/SB-700/SB-800/SB-900/SB-910 Specifications: System type: Digital FSK 2.4GHz wireless transceiver Distance: 100m Channel: 7 Flash mode: i-TTL, manual flash Sync mode: front-curtain sync, rear-curtain syce, hi-speed sync(auto FP) Groups: 3 groups(A/B/C) Sync speed: 1/8000s Input: Hotshoe Output: Hotshoe, PC port Applicable battery: 2 * AA battery(Support 1.2V rechargeable battery)(Batteries not included) Standby time: 60 hours

Descriptions: The Yongnuo YN500EX Speed Light is the brand new range of speedlites which supports high-speed SYNC flash, TTL functions and remote wireless trigger. Compatible with N's and C's wireless flashing system, motor zooming and PC synchronous interface. Large size LCD display, multiple trigger mode, fast current-return functions never let you down. Supports high-speed sync flash: The YN500EX can synchronize with all shutter speeds, the maximum shutter sync up to 1/8000. Compatible with N's and C's wireless flashing system, it is able to respectively accept internal flashing of 580EX II, SB-900 / 800 / 700, 7D / 60D / 600D, C order of N's internal flashing and ST-E2 wireless signal, achieves external TTL and manual flashing. Large-size LCD display: The functions can be checked and set on a more clearly and intuitively basis and can be used more conveniently. Multiple trigger mode supported: It can be triggered by the camera set-top, built-in or main controlled flashing command, S1 and S2 preflashing. Supports power-driven zooming (24~105mm): The covered focal length will vary between 24~105mm on the lamp adapter by operating the zoom button on the flash light. Comprehensively supports TTL functions: HSS, FEC, FEB, Rear-curtain sync, FE lock, Modeling Light, EOS camera menu access able. Remote wireless trigger supported: The YN500EX supports remote wireless trigger function, which makes the Sc / Sn / S1 / S2 mode can be used in outdoor environment and the wireless trigger distance is as long as 15 meters. Sound prompting system: When the sound prompting system is enabled, the different sound ways will prompt the different working conditions of the speed light so as to make you focus on shooting only. Supplied with PC synchronous interface: It makes easier that lightening the speed light synchronously by using PC synchronous line. Fast current-return system: The time for full gloss output current-return will only take you 3 seconds; you can get fast current-return experience even without brand-new batteries which will only take you 4~5 seconds. Advanced option functions: YN500EX has advanced options setting function, where you can self-define the functions of the speedlite as your own requirements. Automatic saving functions: YN500EX can automatically save the operation currently used for your use later. Specifications: Circuit Design: Insulated Gate Bipolar Transistor (IGBT) Guide Number: 53 (ISO 100, 105mm) Flash Mode: TTL, M, Multi, Sc, Sn, S1, S2 Zoom Range: Auto, 24, 35, 50, 70, 80, 105mm Vertical Rotation Angle: -7~90 degrees Horizontal Rotation Angle: 0~270 degrees Power Supply: 4X AA size batteries (Alkaline or Ni-MH are usable) Lighting Times: 100~1500 times (AA alkaline cell used) Recycle Time: Approx. 3s (AA alkaline cell used) Color Temperature: 5600k Flash Time: 1/200s~1/20000s Flash Control: 7 levels of output control (1/64~1/1), 25 levels of fine tuning External Interface: Hot Shoe, PC shot Wireless Triggering Distance: 20~25m indoor, 10~15m outdoor Additional Feature: High-speed sync, Rear-curtain sync, FEC, FEB, FEV, the electronic flash head zooming, sound prompt, automatically saving setting, PC port, power saving mode, over heat protection, advanced setting. Dimension: 62 X 72 X 165 mm (Extended state) Weight: Approx. 500g Suit for: Wirelss TTL Slave mode:For EOS 5DIII 7D 60D 600D 650D, Yongnuo ST-E2, EOS 580EX II Camera with CLS i-TTL system:D4, D3x, D3s, D3, D2x, D700, D300s, D300, D200, D7000, D90, D80 Hot shoe TTL mode:For EOS 1Dx, 1Ds series, 1D series, 5DIII, 5DII, 5D, 7D, 60D, 50D, 40D, 30D, 20D, 650D/T4i, 600D/T3i, 550D/T2i, 500D/T1i, 450D/Xsi, 400D/Xti, 350D, 1100D, 1000D. You should use the External Flash Menus when you use it with (1Ds II, 1Ds, 1D II, 1D, 5D, 30D, 20D, 10D, 400D, 350D, 300D) Yongnuo Flash Trigger YN-622C. Note: To avoid fire or electrical shock, do not expose this device to rain or moisture. To avoid short circuit, be sure the batteries contacts are securely packed and in a accordance with local provision when handing the batteries. Please keep the batteries and the parts away from children. Small parts may cause choking or serious injury if swallowed. Prohibit to shoot eyes directly in case of injury. Do not disassemble or service this product by yourself. Touching the internal high voltage circuit will cause electric shock. Package Included: 1 x Yongnuo YN500EX Flashlight 1 x Protective Bag 1 x Mini Stand 1 x English Manual 1 x Original Packing

Neewer Multi-Channel 2.4GHz 3-IN-1 Wireless Flash Studio Flash Trigger for Nikon         Neewer FC-16 Multi-Channel 2.4GHz 3-IN-1 Wireless Flash/Studio Flash Trigger with Remote Shutter for Nikon D7100 D7000 D5100 D5000 D3200 D3100 D600 D90 D800E D800 D700 D300S D300 D200 D4 D3S D3X D2Xs   - Neewer Wireless Flash Trigger for Nikon - The Neewer Photo wireless flash trigger receiver and transmitter can serve you in a multitude of functions. - To use this set as a wireless remote control, plug in the included N-Cable to both the receiver and your camera's compatible input. Make sure the receiver's and the transmitter's switches are set to "CAMERA" mode and then use the transmitter to wirelessly autofocus and take pictures. - Similarly you can employ a wired remote method simply by plugging in the N-Cable to the transmitter alone and proceeding to use this without the receiver. - Finally, if you wish to use this pack for wireless flash / studio flashtriggering purposes, first attach the transmitter to your camera's hot shoe mount. Attach your flash to the hot shoe mount of the receiver and make sure the switches are set to "FLASH" mode and you can proceed to position the flash however you desire and take photos normally. - Features: - Frequency: 2.4Ghz - Operating Distance: up to 100m. - 16 Selectable Channels. - 1/4" Tripod Mount. - Sync Speed: 1/250 second. - Power Supply: 2x alkaline AAA batteries Wireless Frequency System: 2.4GHz Operating Distance: up to 100meters 16 Selectable Channels Also Compatible with: Fuji S5 Pro, S3 Pro Includes: Wireless Camera Flash Trigger and Camera Remote Control Function (1 Transmitter, 1 Receiver) + N1 camera cable + N3 camera cable + Flash Sync Cable + PC Sync Cord + Sync Adapter 1X Transmitter 1X Receiver 1X N1 camera cable 1X N3 camera cable 1X Flash Sync Cable 1X PC Sync Cord 1X Sync Adapter 1X Manual Instruction 

 1x Yongnuo YN-622N Wireless TTL 1/8000s Flash Trigger for Nikon D700 D800 D90 Specification -Yongnuo First Wireless i-TTL Flash Trigger YN-622N is Released now, it's designed for Nikon Camera. -Using Digital FSK 2.4GHz frequency band with 7 channels, it has three mode, i-TTL (II), Manual and Multi, and it can fire flashes at 360 degree direction, the operating range is 100 metres. -It supports FEC, FEB, FEL, High-speed Sync, 1st. Curtain, 2nd. Curtain, Modeling flash, iTTL II Group Ratio (ALL/A:B/A:B C), Manual/Multi group (ALL/ A:B/ A:B:C), Manual and Multi mode, Auto Zooming, Manual Zooming, AF Lamp. Main function Support Full iTTL Pass-through function when on camera Mount one YN-622N transceiver into the hot shoe of camera, and mount other transceiver into the hot shoe of flash, you can trigger the flash at any direction in TTL, Manual or Multi mode. Mount flash on hot shoe of YN-622N transceiver on camera, mount the second flash on other transceiver, both of flashes can be trigger at any direction in TTL, Manual or Multi mode. Note: Speedlites on hot-shoe of transmitter support iTTL II / Manual / Multi Shutter Sync High-speed Synchronous:The max. sync speed is 1/8000s, but some camera is just 1/4000s, and for those cameras and flashes who don't suport HSS, the sync. speed is just 1/250s or less, different cameras have different Sync speed. 1st. Curtain Sync 2nd. Curtain Sync. -Remote Control Function: The parameter of flashes on hot shoe of receivers can be set up remotely through the camera manu directly. -Supporting mixed mode: With this function, you can trigger remote speedlites in different modes, set up one YN-622N transceiver on hot shoe of flash in TTL mode, set up the second YN-622N transceiver on hot shoe of flash in manual mode, and the third YN-622N transceiver on hot shoe of flash in multi mode, all three flashes can be fired via the transceiver on hot shoe of camera, this mode is especially useful for those camera bodies without a built-in flash menu. Note: Only FEC, FEB, Ratio and Shutter sync can be set in the camera side. Manua and Multi output need to be set on the flash speedlite. -Work with Strobe Studio flash light in HSS function: You can buy a PC Sync Cable RF-603 6.35mm cable to connect the transceiver with the studio flash, and then youcan use the non-high speed sync flash torealize hihger syand then you can use them together in HSS. The max. trigger voltage is less than 300 Voltage. Note: The PC port is for output using only. -Awaking function: When half-pressing the shutter button of the camera, the hot shoe flash on the receiver will be awakened. (for those flash has wake up function) Zoom Function: Zoom Automatic: length will be changed depanding on the changes of lens. Zoom Manual: Zoom length is within 24 - 105mm Zoom Lock -Support Single-contact of camera and flash triggering (the max. Sync. speed is 1/250s): You can use it with Nikon camera or Nikon flash, but you just need to set up YN-622N in manual mode. -Flash Fire Ratio with iTTL: You can set up different flash fire ratio and FEC for those flashs on hot shoe of receiver. -Support 2pcs AA batteries, (1.2v rechargeable battery), Stand-by time is 60hours. -Dimension: 89.5 * 53 * 39MM, net weight is 78g. Note: There is a PC Sync port for YN-622N transceiver, you can use RF-602 PC / PC Cable to connect it with flash. Compatibility -Suit for (Camera): Nikon D70, D70S, D80, D90, D200, D300, D300S, D600, D700, D800, D3000, D3100, D5000, D5100, D5200, D7000, D7100 -Flash compatible (i-TTL): SB400, SB600, SB700, SB80,0 SB90,0 SB910, YN465N, YN467N, YN468N(II), YN565N, YN568N Package Include -1 x YN-622N transceivers NOTE: (Don't come with retail packing,Since Yongnuo not lanuch 1PC retail box.) We will send in sealed bubble bag. -Batteries not include

Yongnuo YN-568EX Wireless Slave TTL Flash Speedlite with  High-speed Sync for Nikon   Was: R Now only:R       Specification: Wireless Slave TTL Flash Speedlite YN-568EX  with  HSS  for Nikon version is realeased,it has  iTTL mode, Manual mode, Multi Mode, and Sc/Sn and S1/S2 mode. Features: a),  Supports Hight-Speed Sync Flash With high-speed sync (FP flash), the YN568EX can synchronize with all shutter speeds,  the maximum shutter sync up to . b),  AWL Suppoted for Canon's and Nikon's System YN-568EX can accept internal flashing of  580EX II, SB-900, SB-800, SB-700, Canon 7D, 60D 600D, Canon c-commander of Nikon's internal flashing and ST-E2 wireless signal, achieves external TTL and manual flashing. c),  TTL Flash With Large Guide Number GN58@ ISOmm; which reaches the level of the mainstream hot shoe flashes, supports HSS, TTL/M/Multi mode. d),  Multiple Trigger More Supported The YN568EX can be triggered by hot shoe, flash command slave mode, optical S1 and S2 (pre-flash-canceled mode). e),  Supports Auto/Manual Zooming YN-568EX covers focal length range of auto, and mm, supports full-frame/half-frame caemra.  f),  Comprehensively Support TTL Functions HSS, FEC, FEB, Rear-curtain sync, FE lock, Modeling Light, Canon camera menu accessible  g),  2.5mm PC Synchronous Interface It makes things easier on lightening the flashlight synchronously by using PC synchronous line. h),  Sound Prompting System When the sound prompting system is enabled, the different sound ways will prompt the different working conditions of the flashlight so as to make you focus on shooting only. i),  Modeling Light Function Press down the camera’s depth-of-fired preview button, the YN568EX will send out continuous flash lasting one second. j),  Advanced Settings On Flash The YN568EX has advanced options setting function, where you can self-define the functions of the flashlight on your own requirements. k),  Automatic Setting Saving YN568EX automatically save the operation currently used for your future use. l),  LCD Panel User Interface With Super Gelivable Metal Hot-Shoe Stand Suit for: 1),  Wirelss TTL Slave mode: Nikon Commander SU-800 Nikon Flash SB-910, SB-900, SB-800, SB-700 Nikon Camera w/ CLS i-TTL system: D3x, D3s, D3, D2x, D700, D300s, D300, D200, D, D90, D80 Canon 7D, 60D, 600D, 650D Canon Flash 580EX II Commander Canon ST-E2 2),  Hot shoe TTL mode: Nikon D4, D3x, D3s, D3, D2x, D800E, D800, D700, D600, D300s, D300, D200, D, D90, D80, D, D, D, D, D, D60, D40, D40x Parameters: Circuit designInsulated Gate Bipolar Transistor (IGBT) Guide No.58 meters (ISO mm) Flash modeTTL MULTI, Sc, Sn, S1, S2 Wireless triggering distancem indoor, m outdoor Zoom rangemm Vertical rotation angle-7~90 degrees Horizontal rotation angle degrees Power supply4×AAsize batteries (Alkaline or Ni-MH are usable) Lighting times times (AA alkaline cell used) Recycle timeapprox 3s (AA alkaline cell used) Color temperaturek Flash times~s Flash control8 levels of output control ( levels of fine tuning External interfacehot shoe, PC port Additional featuresRear-curtain sync, FEC, FEB, FEV, modeling flash, manual zoom, auto zoom, sound prompt, advanced setting, automatically saving setting, PC port, power saving mode and over heat protection Dimensionsmm (Extended state) Net weight350g   Package Included: 1 x YN-568EX for Nikon version 1 x Mini Stand 1 x Manual in English and Chinese 1 x Yongnuo Original box (with black protecting bag)  

Features:   Yongnuo YN568EX TTL flash is an upgraded version of YN565EX now supporting High-Speed synchronization of up to 1/8000s. Great choice for professionals and advanced amateur Nikon users. Yongnuo YN568EX is top of the line external flash for Nikon DSLR cameras. It is a great alternative to much more expensive Nikon SB900, SB910 or SB700 speedlites, offering the same functions and same or even more power at much lower price. High guide number (58m), TTL and HSS (high speed synchronization) make this an excellent tool for digital photography. Yongnuo YN568EX supports high speed sync flash – YN568EX is the first speedlite which supports high-speed flash synchronization; with high-speed sync (FP flash), the YN568EX can synchronize at all shutter speeds. The maximum shutter sync is up to 1/8000 Compatible with Nikon and Canon wireless flash system – One YN568EX is able to respectively accept internal flashing of YN568EX II, 580EX II, SB-910/900/800/700, 7D/70D/60D/600D/650D/700D, Canon commander of Nikon’s built-in flashing and ST-E2 wireless signal, achieving off camera TTL and manual flashing. Some functions such as wireless TTL flashing, grouping light ratio TTL flashing and the illumination of remote controlled flashing can be easily achieved if you carry a camera with built-in flash commander system and YN568EX only. High Guide Number TTL + High Speed Sync – GN58@ ISO100, 105mm; which reaches the level of the mainstream hot shoe flashes, supports HSS, TTL/M/Multi mode. Multiple triggering mode supported – The YN568EX can be triggered by the camera set-top, built-in or main-controlled flashing command, S1 and S2 (pre-flash-canceled mode). Supports auto/manual zooming – The covered focal length can be changed between auto, 24 - 105mm on the lamp adapter by operating the zoom button on the flash light, supporting full-frame/APS-C cameras. Comprehensively supports TTL functions – The YN568EX supports HSS, FEC, FEB, Rear-curtain sync (2nd curtain sync), FE lock, Modeling Light Extreme speed of charging recycle – The time for full power output current-return just takes 3 seconds; you can get fast current-return experience even without brand-new batteries, which just takes 4~5 seconds Equipped with 2.5mm PC Synchronisation interface – It makes things easier on lightening the flashlight synchronously by using PC synchronisation port. Sound prompting system – When the sound prompting system is enabled, the different sound alerts will prompt different working conditions of the flashlight so as to allow you to focus on shooting. Aperture preview – Press the camera’s aperture preview button, the YN568EX will send out continuous flash lasting one second for subjects imaging. Advanced options function – The YN568EX has advanced options settings function, where you can self-define the functions of the flashlight to suit your own requirements. Automatic saving settings – YN568EX can automatically save your current operating settings to convenient your next use. LCD display interface, modern appearance. C ompatible with:   For Nikon D600, D610, D810, D800E, D750, D700, D800, D300, D300S, D7000, D7100, D7200, D3000, D3100, D3200, D3300, D5100, D5000, D5200, D5300, D90, D80 and any other Nikon DSLR Camera   Specification s: Circuit design: Insulated Gate Bipolar Transistor (IGBT) Guide No.: 58 meters (ISO 100, 105mm) Flash mode: TTL, Manual, MULTI, Sc, Sn, S1, S2 Wireless triggering distance: 20~25m indoor, 10~15m outdoor Zoom range: 24, 28, 35, 50, 70, 80, 105mm Vertical rotation angle: -7~90 degrees Horizontal rotation angle: 0~270 degrees Power supply: 4 × AA size batteries (Alkaline or Ni-MH are usable) Lighting times: 100~1500 times (AA alkaline cell used) Recycle time: approx 3s (AA alkaline cell used) Color temperature: 5600k Flash duration: 1/200s~1/20000s Flash control: 8 levels of output control (1/128~1/1), 29 levels of fine tuning External interface: hot shoe, PC port Additional features: Rear-curtain sync, FEC, FEB, FEV, modeling flash, manual zoom, auto zoom, sound prompt, advanced setting, automatically saving setting, PC port, power saving mode and over heat protection Dimensions: 60 × 190 × 73mm (Extended state) Net weight: 380g Note: The battery is not included.   Package Include d:   1 x Yongnuo YN-568EX Flash Speedlite for Nikon 1 x Mini Stand 1 x Manual in English and Chinese 1 x Original Box 1 x Soft Case for Flash

Yongnuo YN-622C E-TTL Wireless HSS 1/8000S Flash Trigger Trigger 2 Transceivers For Canon 1100D 1000D 650D 600D 550D 7D 5DII 50D Description: YN-622C E-TTL wireless flash trigger is a high per formance master and slave equipment of multiple flashes photography, through digital FSK 2.4GHz radio wireless transmission, and different photographic effectscan be realized through setting your flash at 360 degrees.It design of transceiver, the distance of remote control reaches 100M, suppor ting 7 wireless channels and A/B/C three groups. Remotely change the modes and parameters of the flash quickly when using for Canon EOS series DSLR cameras which suppor ts external flash function, such as T TL ratio or manually set each group of flash output. Support high-speed sync, the max sync speed is 1/8000s*,Support E-TTL, Manual and Multi flash modes. Support E-TTL flash installing on the top of transmitter YN-622C 2 transceivers kit consist two similar transceivers, support one camera controlling multiple flashes at the same time. Install the flashes with the receiver additionally purchased to make them into an application form of multiple-flashes, number of the receivers is not limited. Compatible Flash Mode: E-TTL (II)/ Manual/ Multi Compatible Shutter Sync: 1st curtain, 2nd curtain,high speed sync (HSS/FP), Max 1/8000s sync speed Control Remote Flash Using Camera's flash control menu screen(Remote Control Mode) Support E-TTL / Manual/ Multi flash mode mix using(Mix Control Mode) Flash on Hot-shoe of Transmitter Supports ETTL Support Flash Exposure Compensation (FEC) Support Flash Exposure Bracketing (FEB) Support Flash Exposure Lock (FEL) Support modeling FlashSupport E-TTL group ratio (ALL/ A:B/ A:B C) Support Manual/Multi group (ALL/ A:B/ A:B:C) Support Flash zooming (auto, manual)Support AF assist beam emitter(AF Lamp) Support PC port triggering strobe flashes and support 1st, 2nd cur tain/HSS (Super Sync) Support LCD Live view triggering Support high-speed continuous shooting trigger Settings Saved automatically Compatible with ALL YongNuo/ for Canon EXII series flashes Support single-contact of camera & flash triggerin Compatible with: ALL Yongnuo for Canon EXII series flashes,and strobe flashes. 5D Mark III new speedlite 600EX RT / 1100D 1000D 650D 600D 550D 7D 5DII 5DIII 1DIV 1DIII 5D 1D 1DII 10D 20D 30D 40D 50D Package included: 2 x YN-622C Transceivers 1 x User Manual Detail pictures:

Yongnuo YN-622N II Wireless Flash Trigger Receiver TTL for Nikon D4 D7000 The new upgrade version YN622N II supports receiving the trigger signal of the YN560-TX/ RF605 (603MODE)/ RF603II Series products, with multi aspects improved, equipped with quick lock design and supports USB firmware upgrade. Specification We added the quick lock design, you can fasten the hot shoe of this flash trigger with your camera or flash. It supports USB Firmware upgraded. It supports YN-622N, YN-622N-TX, RF-605N, RF-603 II and YN560-TX communication mode. **TTL mode (622 mode), you can use YN-622N, YN-622N II, YN-622N-TX together, ***Manual mode (603-RX mode), you can use YN-560TX, RF-603 II, RF-605N as transmitter, and use YN-622N II as receiver. Main Function *Quick lock design *Supports USB firmware upgrade *Supports "622" communication mode,"603-RX" communication mode *Compatible flash mode: i-TTL, Manual flash *Compatible Shutter sync: front-curtain sync, rear- curtain sync and high-speed sync(HSS/FP), the highest sync speed is 1/8000s* *Support remote set the parameters of flash through the transceiver (Remote Control Mode) *Support i-TTL/Manual/Repeating flash mode mix using(Mix Control Mode) *Support the flash installed on transmitter(on-top flash)and supports i-TTL function *Support the use of master unit on transmitter sets the parameters of each group(Master Control Mode) *Support FEC, FVL function *Support modeling flash and red-eye reduction flash *Support flash zooming (auto) *Built-in AF assist beam emitter (AF Lamp) *Settings saved automatically *Compatible with YongNuo/ Nikon series flashes *Support PC port triggering strobe flashes *PC port support front/rear curtain sync and high-speed sync(Super Sync)function *Support single-contact of camera & flash triggering (max sync speed is 1/250s) Suitable With Camera: -D70 D70S D60 D80 D90 D4 D3X D3S D3 D2X D40X D40 -D800E D800 D700 D600series D300S D300 D200 -D7000 D5300 D5200 D5100 D5000 D3200 D3100 D3000 Flash compatible (i-TTL): -SB600 SB700 SB800 SB900 SB910 -YN467N YN468N(II) YN560II YN560III YN565N YN568N Package Include - 2 x YN-622N II Transceivers -1 x Instruction in English and Chinese -1 x Original Yongnuo Box Note:Batteries & Camera &Flash not included