Sign 400mm

Buy Sign Frame (210*400mm - Double Sided - Wall Mounted) for R1,443.25

Please select the Size and Substrate that you would like your safety sign printed on. Vinyl Sticker Sign,   Gives you freedom to stick it anywhere on a  clean smooth surface being it a  inside or an outside safety sign. ABS Plastic Sign,   Is an easily machined, tough, low cost rigid thermoplastic plastic with high impact strength, used specifically  for all indoor safety signs. Laminated ABS Plastic Sign,   Is an easily machined, tough, low cost rigid thermoplastic plastic with high impact strength, laminated for extra protection and to stop fading, scratching or any other damage done to the sign, used specifically  for all indoor safety signs. ABS Plastic Reflective Sign,   The reflective plastic makes these signs easy to see during the day and at night, used specifically  for all indoor safety signs. Chromadek Steel Sign,   Is a metal sheet that has been galvanised (anti-rust) and coated with a white paint, used specifically  for all outdoor safety signs. Laminated Chromadek Steel Sign,   Is a metal sheet that has been galvanised (anti-rust) and coated with a white paint, laminated for extra protection and to stop fading, scratching or any other damage done to the sign, used specifically  for all outdoor safety signs. Chromadek Steel Reflective Sign,   The reflective steel makes these signs easy to see during the day and at night, used specifically  for all outdoor safety signs. Laminated Magnet Sign,   You can stick it to any metal surface like: cars, metal doors, metal tankers and  anywhere there is a metal surface inside or outside, laminated for extra protection and to stop fading, scratching or any other damage done to the sign,. Regulations: With strict regulations and OHS guidelines demanding when, where and how safety signs are displayed and penalties for failing to comply, you need the right safety signs to prevent injury. Signs are all made according to NOSA and SABS specifications and standards. Viewing distance to choose the right size of sign:

Hazchem Placards: Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) ¿ These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

Hazchem Placards: Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Normal Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

Ladder Safety Signs   Health and safety laws require that people on or near construction sites are warned of all hazardous activities taking place. Before any construction work begins, builders must ensure that an adequate number of general safety signs, depending on the size and complexity of the job site, are erected at the workplace. Availible in 3 Sizes   Comes in two types: ABS (Plastic for Indoor Use)  Chromadek (Steel for Outdoor Use) Please select the size and material that you would like your safety sign printed on. ABS plastic is an easily machined, tough, low cost rigid thermoplastic plastic with high impact strength, used specifically for indoor use of sign boards Chromadek is a metal sheet that has been galvanised (anti-rust) and coated with a white paint, used specifically for outdoor safety signs If you require a custom size, custom sign, need a frame for the sign, or have any other requests, please contact us for a quote.

Hazard Safety Signs:   Last year farming was the most dangerous occupation in South Africa with more lives lost than in any other industry, and up to 1800 injuries. The rate of farm accidents is higher than in any other European country. 20% of fatal accidents involve children and young people.  The use of farm safety signs is one of the key recommendations made for public and worker safety, when farm activity is in progress. Availible in 3 Sizes   Comes in three types: Vinyl Sticker ABS (Plastic for Indoor Use)  Chromadek (Steel for Outdoor Use) Please select the size and material that you would like your safety sign printed on. ABS plastic is an easily machined, tough, low cost rigid thermoplastic plastic with high impact strength, used specifically for indoor use of sign boards Chromadek is a metal sheet that has been galvanised (anti-rust) and coated with a white paint, used specifically for outdoor safety signs

Location of Fire Fighting Equipment   This sign is used to indicate a exit ahead. Availible in 2 Sizes   Comes in two types: ABS (Plastic for Indoor Use)  Chromadek (Steel for Outdoor Use) Please select the size and material that you would like your safety sign printed on. ABS plastic is an easily machined, tough, low cost rigid thermoplastic plastic with high impact strength, used specifically for indoor use of sign boards Chromadek is a metal sheet that has been galvanised (anti-rust) and coated with a white paint, used specifically for outdoor safety signs Dont forget to add your Aluminium frame to the order........

Location of Fire Fighting Equipment   This sign is used to indicate what to do in case of fire. Availible in 2 Sizes   Comes in two types: ABS (Plastic for Indoor Use)  Chromadek (Steel for Outdoor Use) Please select the size and material that you would like your safety sign printed on. ABS plastic is an easily machined, tough, low cost rigid thermoplastic plastic with high impact strength, used specifically for indoor use of sign boards Chromadek is a metal sheet that has been galvanised (anti-rust) and coated with a white paint, used specifically for outdoor safety signs Dont forget to add your Aluminium frame to the order........

Location of Fire Fighting Equipment   This sign is used to indicate a entrance. Availible in 2 Sizes   Comes in two types: ABS (Plastic for Indoor Use)  Chromadek (Steel for Outdoor Use) Please select the size and material that you would like your safety sign printed on. ABS plastic is an easily machined, tough, low cost rigid thermoplastic plastic with high impact strength, used specifically for indoor use of sign boards Chromadek is a metal sheet that has been galvanised (anti-rust) and coated with a white paint, used specifically for outdoor safety signs Dont forget to add your Aluminium frame to the order........

Location of Fire Fighting Equipment   This sign is used to indicate no unauthorised entry. Availible in 2 Sizes   Comes in two types: ABS (Plastic for Indoor Use)  Chromadek (Steel for Outdoor Use) Please select the size and material that you would like your safety sign printed on. ABS plastic is an easily machined, tough, low cost rigid thermoplastic plastic with high impact strength, used specifically for indoor use of sign boards Chromadek is a metal sheet that has been galvanised (anti-rust) and coated with a white paint, used specifically for outdoor safety signs Dont forget to add your Aluminium frame to the order........

Location of Fire Fighting Equipment   This sign is used to indicate a exit. Availible in 2 Sizes   Comes in two types: ABS (Plastic for Indoor Use)  Chromadek (Steel for Outdoor Use) Please select the size and material that you would like your safety sign printed on. ABS plastic is an easily machined, tough, low cost rigid thermoplastic plastic with high impact strength, used specifically for indoor use of sign boards Chromadek is a metal sheet that has been galvanised (anti-rust) and coated with a white paint, used specifically for outdoor safety signs Dont forget to add your Aluminium frame to the order........

Factory Safety Signs   Health and safety laws require that people in and around factories are warned of all hazardous activities taking place. Before any factory work begins, owners of factories must ensure that an adequate number of general safety signs, depending on the size and complexity of the work area, are erected at the workplace. Availible in 3 Sizes   Comes in two types: ABS (Plastic for Indoor Use)  Chromadek (Steel for Outdoor Use) Please select the size and material that you would like your safety sign printed on. ABS plastic is an easily machined, tough, low cost rigid thermoplastic plastic with high impact strength, used specifically for indoor use of sign boards Chromadek is a metal sheet that has been galvanised (anti-rust) and coated with a white paint, used specifically for outdoor safety signs If you require a custom size, custom sign, need a frame for the sign, or have any other requests, please contact us for a quote. Dont forget to add your Aluminium frame to the order........

Hazard Safety Signs:   Most workplaces have hazards which have the potential to threaten employee or customer or visitor safety. Safety signs can improve the safety of the workplace by identifying dangers and reminding employees of good safety procedures. Availible in 3 Sizes   Comes in three types: Vinyl Sticker ABS (Plastic for Indoor Use)  Chromadek (Steel for Outdoor Use) Please select the size and material that you would like your safety sign printed on. ABS plastic is an easily machined, tough, low cost rigid thermoplastic plastic with high impact strength, used specifically for indoor use of sign boards Chromadek is a metal sheet that has been galvanised (anti-rust) and coated with a white paint, used specifically for outdoor safety signs

Gas Safety Signs   It's important to make sure that your gas container storage areas remain safe with  Gas Safety Signs. Gases can be extremely dangerous due to their flammability and explosiveness. Alerting workers with  Gas Safety Signs  that boldly state no smoking or no open flames, can prevent explosions and keep these container storage areas safe. Availible in 1 Size   Comes in three types: Vinyl (Sticker) ABS (Plastic for Indoor Use)  Chromadek (Steel for Outdoor Use) Please select the size and material that you would like your safety sign printed on. ABS plastic is an easily machined, tough, low cost rigid thermoplastic plastic with high impact strength, used specifically for indoor use of sign boards Chromadek is a metal sheet that has been galvanised (anti-rust) and coated with a white paint, used specifically for outdoor safety signs Dont forget to add your Aluminium frame to the order........

Location of Fire Fighting Equipment   This sign is used to indicate a location of the fire extingisher placement. Availible in 2 Sizes   Comes in two types: ABS (Plastic for Indoor Use)  Chromadek (Steel for Outdoor Use) Please select the size and material that you would like your safety sign printed on. ABS plastic is an easily machined, tough, low cost rigid thermoplastic plastic with high impact strength, used specifically for indoor use of sign boards Chromadek is a metal sheet that has been galvanised (anti-rust) and coated with a white paint, used specifically for outdoor safety signs Dont forget to add your Aluminium frame to the order........

Buy (CS8) Scaffolding Safety Check Before Use Sign - 400mm * 600mm 0.6mm Chromadek Steel for R296.40

Buy (PE10) Do Not Use Near Water / Electrical Sign - 400mm * 600mm 0.6mm Chromadek Steel for R296.40

Buy Tripping, Beware Hazard Descriptive Safety Sign - 400mm * 600mm 0.6mm Reflective Chromadek Steel for R611.79

Buy Overhead, Beware Hazard Descriptive Safety Sign - 400mm * 600mm 0.6mm Laminated Chromadek Steel for R490.84

Buy No Drilling Prohibited Descriptive Safety Sign - 400mm * 600mm 0.6mm Reflective Chromadek Steel for R611.79

Hazchem Placards: Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) — typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) — These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) — typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck — this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) — typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) — typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck — this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

Hazchem Placards: Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Normal Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) — typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) — typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck — this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

Buy Strong Magnetic Field, Beware Hazard Descriptive Safety Sign - 400mm * 600mm 0.6mm Laminated Chromad for R490.84

UN1665 Nitroxylenes, liquid, Toxic (6), Hazchem Placard Hazchem Placards: Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) ¿ These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

UN1366 Diethylzinc, Spontaneously Combustible (4), Hazchem Placard Hazchem Placards: Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) ¿ These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

UN1214 Isobutylamine, Flammable Liquid (3), Hazchem Placard Hazchem Placards: Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) ¿ These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.

UN0237 Charges, Shaped, Flexible, Linear (1.4D) Hazchem Placard Hazchem Placards: Hazchem placards are signboards which are fitted to vehicles transporting dangerous goods. The placard should clearly indicate the product transported by means of a UN number of MIXED LOAD where more than one product from different classes are transported. By law, there should be no placard on an empty vehicle. By law, the placard should be clearly visible from the roadside and the 10 mm black border should be visible. By law, each vehicle should have 3 placards (6 in the case of a super link). One on each side and one at the back. Bakkie-Sized Hazchem Placards: Reduced size Hazchem Placards are used on vehicles with gross vehicle mass less than 3500kg's. We manufacture placards in 4 types of materials: Sticker Placard: (350mm*200 mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. Magnetic Laminated Placard: (350mm*200 mm) ¿ These are stuck directly onto the vehicle. These are stuck directly to any metal surface and are laminated for the protection of the sign. ABS Plastic / Chromadek Steel Placard: (375mm*225 mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 25mm larger than the vinyl so that the black border is still visible when slid into the steel frame. Truck-Sized Hachem Placards: These placards are used on vehicles with a gross vehicle mass more than 3500kg's. We manufacture placards in 4 types of material: Sticker Placard: (700mm*400mm) ¿ typically used on tankers or once-off loads. These are stuck directly onto the vehicle. ABS Plastic / Chromadek Steel Placard: (750mm*450mm) ¿ typically used on vehicles where the load changes daily. These are not fitted directly to the truck, but are slid into a steel frame which is fitted to the truck ¿ this allows the driver to remove the placard when the truck is empty. These signs are manufactured 50mm larger than the vinyl so that the black border is still visible when slid into the steel frame. These placards are used on vehicles with a gross vehicle mass more than 3500kg's. Magnetic Laminated Placard: (700mm*400mm) - typically used on tankers or once-off loads. these are stuck directly to any metal surface and are laminated for the protection of the sign.