Sensor line

3-WAY LINE TRACING / FINDER SENSOR / MODULE USING INFRARED LIGHT DETECTION; ANTI-JAMMING CAPABILITY; USING CTRT5000 SENSORS; ADJUSTABLE SENSITIVITY; STABLE PERFORMANCE.

Buy LINE TRACKING REFLECTIVE IR SENSOR BOARD KE0068 for R59.86

Hands down the best active speaker on the market !!! StageSource® is designed to be the world’s most versatile loudspeaker system for musicians and other performers Using six powerful DSP-based Smart Speaker modes, the StageSource L3T output is optimized for a variety of performance scenarios including front-of-house PA, floor monitor, personal PA, keyboard backline, acoustic guitar backline, or with a multi-effects guitar processor as a high-performance electric guitar speaker system. Onboard accelerometer and pole mount sensors automatically detect the speaker’s orientation and set the Smart Speaker mode accordingly Powerful -watt, Three-way Design The-watt, 3-way, tri-amped speaker system and a dual-braced tour-grade plywood enclosure combine to deliver astounding power and reliability. The innovative multi-function design enables the L3m to be the perfect loudspeaker in a wide variety of applications including floor or stage-stacked, pole-mounted, horizontal as a floor monitor, Virtual Tilt-back for instrument backline or flown with the integrated M10 suspension points for installation. Fast Networking via L6 LINK In live sound situations where two or more speakers are needed, StageSource products use a proprietary digital networking protocol called L6 LINK™ to simplify setup. Loudspeakers will automatically self-configure, pan stereo signals, adjust Smart Speaker modes and perform system-wide optimization. Add StageSource L3s subwoofers to the mix and the system automatically sends them the summed signals and sets the crossovers. When combined, Line 6 live sound products form an intelligent ecosystem that sets up faster and helps you sound your best no matter what Orientation and Pole-mount Sensors StageSource L3m uses an internal accelerometer, optical sensors and DSP to accelerate setup and optimize the sound of your system. Based on the information the system detects, it selects the right Smart Speaker mode for the application, and automatically adjusts its performance. For example, when the unit is powered on in a horizontal position, it automatically selects Floor Monitor mode. This mode provides a slight reduction in low-frequency content to counteract coupling when placing the speaker on the floor. If any "backline" mode is chosen (Keyboard, Acoustic Guitar, Electric Guitar), the L3m then checks its orientation (via the accelerometer) and looks to see if it is on a pole (via the pole sensor). If the speaker is vertical and not on a pole, the L3m activates Virtual Tilt-back which optimizes the speaker tuning to achieve an upward tilt to its main axis. This helps to aim the sound upward towards the performer's ears when the speaker is placed on the ground. If the speaker is on a pole, it doesn't activate Virtual Tilt-back because it assumes that the speaker is elevated and aimed in the desired direction. Integrated Feedback Suppression Since feedback can ruin a performance, StageSource L2m uses intelligent 12-band feedback suppression to identify the problem frequencies and adjust levels without affecting the overall sound. L3m feedback suppression continuously analyzes the audio signal, identifying frequencies that have the characteristics of feedback (steady frequencies with few overtones, rising in amplitude) and then applies a narrow notch filter to remove the offending frequency. L3m feedback suppression can remove up to 12 independent feedback frequencies. You can set the feedback analyzer to one of three modes, depending on how aggressively the analyzer will seek out potential feedback frequencies. BUILT IN MIXER The L3t can function as a self-contained live sound solution. With a full-featured onboard mixer including multiple inputs for microphones, instruments, external mixers and MP3 players, L3t delivers all of the tools you need for great live sound. 3-band EQ with sweepable mid, Smart Mod and Smart Reverb effects on each input channel allow you to sweeten the sound of any vocal or instrument. Line 6 Acoustic Guitar modeling adds depth and warmth to any acoustic guitar fitted with piezo pickups. Onboard 12-band feedback suppression and an output limiter protects against squeals during your performance. The combination of effects, acoustic guitar modeling and feedback suppression make the L3t a powerful live sound solution for acoustic musicians. StageSource L3t onboard mixer features: 2 mic/instrument combi inputs with -20dB pad switches and gain pots 1 XLR line aux input 1 stereo RCA aux input 3-band EQ with sweepable mid Acoustic guitar modeling 12-band feedback suppression Smart Reverb and Smart Mod effects XLR outputs Master volume

Hands down the best active speaker on the market !!! StageSource® is designed to be the world’s most versatile loudspeaker system for musicians and other performers Using six powerful DSP-based Smart Speaker modes, the StageSource L2m output is optimized for a variety of performance scenarios including front-of-house PA, floor monitor, personal PA, keyboard backline, acoustic guitar backline, or with a multi-effects guitar processor as a high-performance electric guitar speaker system. Onboard accelerometer and pole mount sensors automatically detect the speaker’s orientation and set the Smart Speaker mode accordingly Powerful 700-watt, Three-way Design The 700-watt, 3-way, tri-amped speaker system and a dual-braced tour-grade plywood enclosure combine to deliver astounding power and reliability. The innovative multi-function design enables the L3m to be the perfect loudspeaker in a wide variety of applications including floor or stage-stacked, pole-mounted, horizontal as a floor monitor, Virtual Tilt-back for instrument backline or flown with the integrated M10 suspension points for installation. Fast Networking via L6 LINK In live sound situations where two or more speakers are needed, StageSource products use a proprietary digital networking protocol called L6 LINK™ to simplify setup. Loudspeakers will automatically self-configure, pan stereo signals, adjust Smart Speaker modes and perform system-wide optimization. Add StageSource L3s subwoofers to the mix and the system automatically sends them the summed signals and sets the crossovers. When combined, Line 6 live sound products form an intelligent ecosystem that sets up faster and helps you sound your best no matter what Orientation and Pole-mount Sensors StageSource L3m uses an internal accelerometer, optical sensors and DSP to accelerate setup and optimize the sound of your system. Based on the information the system detects, it selects the right Smart Speaker mode for the application, and automatically adjusts its performance. For example, when the unit is powered on in a horizontal position, it automatically selects Floor Monitor mode. This mode provides a slight reduction in low-frequency content to counteract coupling when placing the speaker on the floor. If any "backline" mode is chosen (Keyboard, Acoustic Guitar, Electric Guitar), the L3m then checks its orientation (via the accelerometer) and looks to see if it is on a pole (via the pole sensor). If the speaker is vertical and not on a pole, the L3m activates Virtual Tilt-back which optimizes the speaker tuning to achieve an upward tilt to its main axis. This helps to aim the sound upward towards the performer's ears when the speaker is placed on the ground. If the speaker is on a pole, it doesn't activate Virtual Tilt-back because it assumes that the speaker is elevated and aimed in the desired direction. Integrated Feedback Suppression Since feedback can ruin a performance, StageSource L2m uses intelligent 12-band feedback suppression to identify the problem frequencies and adjust levels without affecting the overall sound. L3m feedback suppression continuously analyzes the audio signal, identifying frequencies that have the characteristics of feedback (steady frequencies with few overtones, rising in amplitude) and then applies a narrow notch filter to remove the offending frequency. L3m feedback suppression can remove up to 12 independent feedback frequencies. You can set the feedback analyzer to one of three modes, depending on how aggressively the analyzer will seek out potential feedback frequencies. BUILT IN MIXER The L3t can function as a self-contained live sound solution. With a full-featured onboard mixer including multiple inputs for microphones, instruments, external mixers and MP3 players, L3t delivers all of the tools you need for great live sound. 3-band EQ with sweepable mid, Smart Mod and Smart Reverb effects on each input channel allow you to sweeten the sound of any vocal or instrument. Line 6 Acoustic Guitar modeling adds depth and warmth to any acoustic guitar fitted with piezo pickups. Onboard 12-band feedback suppression and an output limiter protects against squeals during your performance. The combination of effects, acoustic guitar modeling and feedback suppression make the L3t a powerful live sound solution for acoustic musicians. StageSource L3t onboard mixer features: 2 mic/instrument combi inputs with -20dB pad switches and gain pots 1 XLR line aux input 1 stereo RCA aux input 3-band EQ with sweepable mid Acoustic guitar modeling 12-band feedback suppression Smart Reverb and Smart Mod effects XLR outputs Master volume

Hands down the best active speaker on the market !!! StageSource® is designed to be the world’s most versatile loudspeaker system for musicians and other performers Using six powerful DSP-based Smart Speaker modes, the StageSource L3m output is optimized for a variety of performance scenarios including front-of-house PA, floor monitor, personal PA, keyboard backline, acoustic guitar backline, or with a multi-effects guitar processor as a high-performance electric guitar speaker system. Onboard accelerometer and pole mount sensors automatically detect the speaker’s orientation and set the Smart Speaker mode accordingly Powerful -watt, Three-way Design The -watt, 3-way, tri-amped speaker system and a dual-braced tour-grade plywood enclosure combine to deliver astounding power and reliability. The innovative multi-function design enables the L3m to be the perfect loudspeaker in a wide variety of applications including floor or stage-stacked, pole-mounted, horizontal as a floor monitor, Virtual Tilt-back for instrument backline or flown with the integrated M10 suspension points for installation. Fast Networking via L6 LINK In live sound situations where two or more speakers are needed, StageSource products use a proprietary digital networking protocol called L6 LINK™ to simplify setup. Loudspeakers will automatically self-configure, pan stereo signals, adjust Smart Speaker modes and perform system-wide optimization. Add StageSource L3s subwoofers to the mix and the system automatically sends them the summed signals and sets the crossovers. When combined, Line 6 live sound products form an intelligent ecosystem that sets up faster and helps you sound your best no matter what Orientation and Pole-mount Sensors StageSource L3m uses an internal accelerometer, optical sensors and DSP to accelerate setup and optimize the sound of your system. Based on the information the system detects, it selects the right Smart Speaker mode for the application, and automatically adjusts its performance. For example, when the unit is powered on in a horizontal position, it automatically selects Floor Monitor mode. This mode provides a slight reduction in low-frequency content to counteract coupling when placing the speaker on the floor. If any "backline" mode is chosen (Keyboard, Acoustic Guitar, Electric Guitar), the L3m then checks its orientation (via the accelerometer) and looks to see if it is on a pole (via the pole sensor). If the speaker is vertical and not on a pole, the L3m activates Virtual Tilt-back which optimizes the speaker tuning to achieve an upward tilt to its main axis. This helps to aim the sound upward towards the performer's ears when the speaker is placed on the ground. If the speaker is on a pole, it doesn't activate Virtual Tilt-back because it assumes that the speaker is elevated and aimed in the desired direction. Integrated Feedback Suppression Since feedback can ruin a performance, StageSource L3m uses intelligent 12-band feedback suppression to identify the problem frequencies and adjust levels without affecting the overall sound. L3m feedback suppression continuously analyzes the audio signal, identifying frequencies that have the characteristics of feedback (steady frequencies with few overtones, rising in amplitude) and then applies a narrow notch filter to remove the offending frequency. L3m feedback suppression can remove up to 12 independent feedback frequencies. You can set the feedback analyzer to one of three modes, depending on how aggressively the analyzer will seek out potential feedback frequencies.

Hands down the best active speaker on the market !!! StageSource® is designed to be the world’s most versatile loudspeaker system for musicians and other performers Using six powerful DSP-based Smart Speaker modes, the StageSource L2m output is optimized for a variety of performance scenarios including front-of-house PA, floor monitor, personal PA, keyboard backline, acoustic guitar backline, or with a multi-effects guitar processor as a high-performance electric guitar speaker system. Onboard accelerometer and pole mount sensors automatically detect the speaker’s orientation and set the Smart Speaker mode accordingly Powerful 700-watt, Three-way Design The 700-watt, 3-way, tri-amped speaker system and a dual-braced tour-grade plywood enclosure combine to deliver astounding power and reliability. The innovative multi-function design enables the L3m to be the perfect loudspeaker in a wide variety of applications including floor or stage-stacked, pole-mounted, horizontal as a floor monitor, Virtual Tilt-back for instrument backline or flown with the integrated M10 suspension points for installation. Fast Networking via L6 LINK In live sound situations where two or more speakers are needed, StageSource products use a proprietary digital networking protocol called L6 LINK™ to simplify setup. Loudspeakers will automatically self-configure, pan stereo signals, adjust Smart Speaker modes and perform system-wide optimization. Add StageSource L3s subwoofers to the mix and the system automatically sends them the summed signals and sets the crossovers. When combined, Line 6 live sound products form an intelligent ecosystem that sets up faster and helps you sound your best no matter what Orientation and Pole-mount Sensors StageSource L3m uses an internal accelerometer, optical sensors and DSP to accelerate setup and optimize the sound of your system. Based on the information the system detects, it selects the right Smart Speaker mode for the application, and automatically adjusts its performance. For example, when the unit is powered on in a horizontal position, it automatically selects Floor Monitor mode. This mode provides a slight reduction in low-frequency content to counteract coupling when placing the speaker on the floor. If any "backline" mode is chosen (Keyboard, Acoustic Guitar, Electric Guitar), the L3m then checks its orientation (via the accelerometer) and looks to see if it is on a pole (via the pole sensor). If the speaker is vertical and not on a pole, the L3m activates Virtual Tilt-back which optimizes the speaker tuning to achieve an upward tilt to its main axis. This helps to aim the sound upward towards the performer's ears when the speaker is placed on the ground. If the speaker is on a pole, it doesn't activate Virtual Tilt-back because it assumes that the speaker is elevated and aimed in the desired direction. Integrated Feedback Suppression Since feedback can ruin a performance, StageSource L2m uses intelligent 12-band feedback suppression to identify the problem frequencies and adjust levels without affecting the overall sound. L3m feedback suppression continuously analyzes the audio signal, identifying frequencies that have the characteristics of feedback (steady frequencies with few overtones, rising in amplitude) and then applies a narrow notch filter to remove the offending frequency. L3m feedback suppression can remove up to 12 independent feedback frequencies. You can set the feedback analyzer to one of three modes, depending on how aggressively the analyzer will seek out potential feedback frequencies.

FAST AFFORDABLE COURIER SHIPPING TO SOUTH AFRICA Feature: Specifically designed as a black line (white) XunQu, especially suitable for the complex of black and white line, cross black and white line detection, it has 6 road high sensitivity infrared sensor (5 escapes patrol, 1 road), to the recognition of black and white line accurately, it has the following functions and features: 1. It is integrated no.5 high sensitivity tracking sensor, for the environmental impact of small, can accurate tracking to complex black line (white line), for the simple black line tracking more comfortable. 2. It is integrated infrared barrie sensor, escapes distance can be regulated through the slide rheostat. 3. It has a specially designed touch detection sensor, from the design of the robot is more simple. 4. It is all of the output signal to digital signal (v), convenient connected with MCU. 5. All sensor output state BFD - 1000 have LED lights as instructions, convenient debugging. 6. It support voltage of 3.0-5.5 v meet the demand of most systems. 7. Using high sensitivity of the sensor, tracking range between 0.5 mm to 40 mm any change and don't need to do any adjustment. Technical Parameters: Detection range: 0 to 4 cm (black and white line sensor) / 0 to 5 cm (adjustable distance detection) The input voltage: 3.0 to 5.5 V Output format: digital output (v) Package Included: 1 x Tracing Sensor Module Five Road Tracing Module Tracing Sensor Module 5 Functions Intelligent Vehicle Control Board Five Road Tracing Module Tracing Sensor Module 5 Functions Intelligent Vehicle Control Board Five Road Tracing Module Tracing Sensor Module 5 Functions Intelligent Vehicle Control Board

4 Channel Infrared Tracking Sensor Module IR Line Patrol For Arduino Smart Car Feature: Smart car or a robot hunt (including black and white lines), walking path along the black line, also known as tracking. Smart car to avoid obstacle and cliff, anti-drop. Can be applied to other automation applications of photoelectric reflex. Specification: Working voltage: DC 3.3V-5V Working current: try to choose more than 1A power supply Working temperature: -10°C to +50°C Mounting aperture: M3 screw Detection range: 1mm to 60cm adjustable, the closer the performance more stable, white reflects the farthest distance. Output interface: 6 wire interface (1234 to 4 signal output ends, + positive power, - for the negative power is ground) The output signal: TTL level (can be directly connected to I/0 microcontroller, infrared light reflected back to the sensor induction, the red indicator light, output low level; no infrared light, the indicator light does not shine, the output high.) Package included: 1 x Tracking Module (Hollow Board + Small Plate Forward) 1 x Female to Female Dupont Line

Description Robot Line Follow Sensor This version of the QRE1113 breakout board features a digital output, using acapacitor discharge circuit to measure the amount of reflection. This tinyboard is perfect for line sensing when only digital I/O is available, and canbe used in both 3.3V and 5V systems. Quick Spec 5VDC operating voltage QRE1113 IR reflectance sensor 25mA supply current Digital I/O compatible No ADC required Optimal sensing distance: 3mm Resources Sparkfun Product Page More Info Local Stock. More Products View More Products

5Pcs 5V Infrared Line Tracking Sensor Module For Arduino Feature: Quantity: 5pcs Size: 3.5 x 1cm Power supply: 5V DC Detector distance: 10mm Build-in Tcrt5000 Sensor NSOR Applicable to a variety of platforms including Arduino / AVR / ARM /PIC Package included: 5 x Tracking Sensor Module  

Feature: Type: Female to female Total 3 sets 1 set includes: 5 x 2P Dupont line 20cm 3 x 4P Dupont line 20cm 2 x 6P Dupont line 20cm 2 x 8P Dupont line 20cm 10 x 3P Dupont line 25cm

TCRT5000 Infrared Reflective Switch IR Barrier Line Track Sensor Module Features: TCRT5000 sensor of infrared emission diode constantly launch infrared, the infrared ray is emitted when the intensity of reflected back has not been reflected or but is not big enough, the light activated triode has been in the off state, the output end of the module at this time for the high level, indicating diode has been put out state; Detected objects appear within the scope of testing, infrared light is reflected back and strength is enough big, light activated triode saturation, at this time the output of the module for the low level, instructs the diode lights. Specification: 1. Using infrared reflection sensors TCRT5000 2. Test reflection distance: 1mm to 25mm 3. Clean and the comparator output, signal waveform, driving ability is strong, for more than 15 ma. 4. With many adjustable precision potentiometer to adjust sensitivity 5. The working voltage of 3.3V to 5V 6. Output form: digital switch output (0 and 1) 7. Has a fixed bolt hole, convenient installation 8. Small board PCB size: 3.1cm x 1.4cm 9. The LM393, use of wide voltage comparator 10. Applications: 1, the electricity meter pulse data sampling 11. Fax machine, shredder paper detection 12. Obstacle detection 13. Black and white line detection Package included: 1 x TCRT5000 Module

Features: 2.8V Regulator - Provides the required 2.8V for the sensor I2C Level Shifter - Provides logic level conversion from 2.8V to VCC 3-in-1 Module IR Emitter Range Sensor Ambient Light Sensor Measures absolute range up to 10cm Gesture Recognition I2C Interface Two Programmable GPIO Pinout description: VIN---This is the main 2.7 V to 5.5 V power supply connection. The SCL and SDA level shifters pull the IIC lines high to this level. GND---The ground (0 V) connection for your power supply. Your IIC control source must also share a common ground with this board. SDA/SDI/SDO---Level-shifted IIC data line: HIGH is VIN, LOW is 0 V SCL/SPC---Level-shifted IIC clock line: HIGH is VIN, LOW is 0 V GPIO0/CE---This pin is configured as a chip enable input on power-up of the VL6180X, the board pulls it up to VDD to enable the sensor by default. Driving this pin low puts the sensor into hardware standby. After the VL6180X powers up, this pin can be reconfigured as a programmable interrupt output (VDD logic level). This input/output is not level-shifted. GPIO1---Programmable interrupt output (VDD logic level). The VL6180X also drives this pin low when it is in hardware standby. This output is not level-shifted. Package Included: 1 x VL6180X Module

Feature: Quantity: 1pc Size: 3.5 x 1cm Power supply: 5V DC Detector distance: 10mm Build-in Tcrt5000 Sensor NSOR Applicable to a variety of platforms including Arduino / AVR / ARM /PIC Package included: 20 x Infrared line track follower sensor module

Description Overview This sensor module have great adaptive capability of the ambient light, having a pair of infrared transmitter and the receiver tube, the infrared emitting tube to emit a certain frequency, encounters an obstacle detection direction (reflecting surface), infrared reflected back to the receiver tube receiving, after a comparator circuit processing, the green LED lights up, while the signal output will output digital signal (a low-level signal), through the potentiometer knob to adjust the detection distance, the effective distance range 2 ~ 80cm working voltage of 3.3V-5V. The detection range of the sensor can be adjusted by the potentiometer, with little interference, easy to assemble, easy to use features, can be widely used robot obstacle avoidance, obstacle avoidance car assembly line count and black-and-white line tracking and many other occasions. Features When the module detects obstacles in front of the signal, the circuit board green indicator light level, while the OUT port continuous output low-level signals, the module detects a distance of 2 ~ 80cm, detection angle 35 °, the detection distance can be potential adjustment with adjustment potentiometer clockwise, the increase in detection distance; counterclockwise adjustment potentiometer, the detection distance decreased. The sensor active infrared reflection detection, target reflectivity and shape of the detection distance of the key. The black minimum detection range, white maximum; small area object distance is small, a large area from the large. The sensor module output port OUT can be directly connected with the microcontroller IO port can also be driven directly to a 5V relay; Connection: VCC-VCC; GND-GND; OUT-IO The comparator using LM393, stable; 3-5V DC power supply module can be used. When the power is turned on, the red power LED is lit; With the screw holes of 3mm, easy to install; Board size: 3.1x1.5cm Each module in the delivery has threshold comparator voltage adjustable via potentiometer, special circumstances, please do not adjust the potentiometer. Specifications Interface(3-wire) VCC external 3.3V-5V Voltage (can be directly connected with the a 5V microcontroller and 3.3V microcontroller) GND external GND OUT board digital output interface (0 and 1) LEDs: Power Indicator, Switch Indictor More Products View More Products

Features: 1. Programmable and you can add functions. 2. TP4056 charger module to charge your Li-ion battery. 3. 18650 Li-ion battery solution power both L298N and UNO board. 4. Android bluetooth control, obstacle avoidance, IR remote control and line tracking/follower 4 functions in 1 smart robotic car. About the UNO: Add A6 and A7 analog I/O. Come with SHIELDED USB cable for stable data transit. Add two rows of the pass-thru holes for connecting normal dupont line. This UNO is manufactured using the Creative Commons files, compatible with Arduino software(IDE) in every way. Specifications: Material: Circuit Board + Electronic Component Finished Car Size: (L)X(W)X(H)21.6X12X13.5cm/8.50''X8.07''X5.31''(appr.) Package included: 1 x 4WD Acrylic Chassis Kit (4 Motors + 4 Wheels + 2 Acrylic body + 4 Encoder Disc + 1 Boat shape switch + 1 bag of screws and bolt) 1 x UNO R3 Board (Fully ARDUINO-Compatible) 1 x Shielded USB Cable 1 x V5 Sensor Shield 1 x L298N Dual H Bridge Motor Driver Module 1 x HC-06 Bluetooth Module 1 x IR Receive Module 1 x IR Remote Controller (Battery CR2032 included) 3 x Line Tracking Sensor Module 1 x HC-SR04 Ultrasonic Range Finder 1 x Acrylic Bracket for HC-SR04 Ultrasonic Range Finder 1 x SG90 Servo 1 x Acrylic Bracket for SG90 Servo 40 x Female to Female Dupont Cable 7 x Red Electronic Cable 5 x Black Electronic Cable 2 x TP4056 battery charging module (For charging one 18650 battery cell one time only) 3 x 18650 Battery Holder (2 in 1 type 1piece and single type 2pcs.18650 Battery NOT INCLUDED)

50pcs 5V Infrared Line Track Tracking Tracker Sensor Module For Arduino Package contains 1 X item of the smallest listed variant.

Buy KEYBOT PROGRAMMABLE ROBOT 3W LINE TRACKING SENSOR KS0352 for R71.86

Buy DC 5V 3 Channel Infrared Line Tracker Sensor Module Trio Detector Output for R205.00

Buy Passive Buzzer Sound Sensor Module with 3 Pin Dupont Line for Computers Printer Photocopier... for R171.82

Buy 1838T Infrared Receiver Sensor Module with 3 Pin Dupont Line for Ardunio... for R199.00

Securnix 1.3 inch B W CCD Camera 420TV line -Commpatible with Various Lens, Delicate appearance image sensor: 1/3* CCD image sensor Effective pixels PAL-512(H) x 492 (V) signal system: PAL/NTSC Horizontal Resolution: 420TV line Minimum illumination:F1.2 0.5lux S/N RATIO More Than:50db Video output: VIDEO OUT (BNC) Power Requirement:DC12V/500mA Power Consumption:2.8w, Retail Box, 1 Year Warranty

Description: There are some electronic modules,you will more interested during learning procedure. Provide learning lessons and technique support. You will know more about Arduino when you are assembling these modules. Android bluetooth control,obstacle avoidance,IR remote control and line tracking/follower 4 functions in 1 smart robotic car. 18650 Li-ion battery solution power both L298N and UNO board. TP4056 charger module to charge your Li-ion battery. Package included: 1 x 4WD Acrylic Chassis Kit (4 Motors + 4 Wheels + 2 Acrylic body + 4 Encoder Disc + 1 Boat shape switch + 1 bag of screws and bolt) 1 x UNO R3 Board (Fully ARDUINO-Compatible) 1 x 50cm Long Shielded USB Cable 1 x V5 Sensor Shield 1 x L298N Dual H Bridge Motor Driver Module 1 x HC-06 Bluetooth Module 1 x IR Receive Module 1 x IR Remote Controller 3 x Line Tracking Sensor Module 1 x HC-SR04 Ultrasonic Range Finder 1 x Acrylic Bracket for HC-SR04 Ultrasonic Range Finder 1 x SG90 Servo 1 x Acrylic Bracket for SG90 Servo 40 x Female to Female Dupont Cable 7 x Red Electronic Cable. 5 x Black Electronic Cable. 2 x TP4056 Battery Charging Module (For charging one 18650 battery cell one time only) 3 x 18650 Battery Holder Here is the link of the (←click here) for your reference, you may download for yourself

Casey 1/3" B/W CCD Camera 420TV line - Commpatible with Various Lens, Delicate appearance image sensor: 1/3* CCD image sensor Effective pixels PAL-512(H) x 492 (V) signal system: PAL/NTSC Horizontal Resolution: 420TV line Minimum illumination:F1.2 0.5lux S/N RATIO More Than:50db Video output: VIDEO OUT (BNC) Power Requirement:DC12V/500mA Power Consumption:2.8w, Retail Box, 1 Year Warranty

30pcs TCRT5000 Infrared Reflective Switch IR Barrier Line Track Sensor Module

Features: TCRT5000 sensor of infrared emission diode constantly launch infrared, the infrared ray is emitted when the intensity of reflected back has not been reflected or but is not big enough, the light activated triode has been in the off state, the output end of the module at this time for the high level, indicating diode has been put out state; Detected objects appear within the scope of testing, infrared light is reflected back and strength is enough big, light activated triode saturation, at this time the output of the module for the low level, instructs the diode lights. Specification: 1. Using infrared reflection sensors TCRT5000 2. Test reflection distance: 1mm to 25mm 3. Clean and the comparator output, signal waveform, driving ability is strong, for more than 15 ma. 4. With many adjustable precision potentiometer to adjust sensitivity 5. The working voltage of 3.3V to 5V 6. Output form: digital switch output (0 and 1) 7. Has a fixed bolt hole, convenient installation 8. Small board PCB size: 3.1cm x 1.4cm 9. The LM393, use of wide voltage comparator 10. Applications: 1, the electricity meter pulse data sampling 11. Fax machine, shredder paper detection 12. Obstacle detection 13. Black and white line detection Package included: 10 x TCRT5000 Module

Buy 30pcs TCRT5000 Infrared Reflective Switch IR Barrier Line Track Sensor Module for R377.22

Buy KittenBot Five Road 5 Channel Tracking Line Obstacle Avoidance Sensor Module Supports for R378.64

Buy 20pcs TCRT5000 Infrared Reflective Switch IR Barrier Line Track Sensor Module for R300.07

Buy Emakefun DC 5V Tilt Sensor Module 4PIN Anti-reverse Connection Dupont Line Compatible with Lego B... for R209.00