Schneider usb charger module

Buy USB Lithium Battery Charger Module Board With Charging And Protection for R161.54

2Pcs 3V To 5V 1A USB Charger DC-DC Converter Step Up Boost Module Features: Module uses the Taiwan production boost chip, high efficiency (up to 92%), plus built-in over-current protection chip, can be more good to protect the module and use the device after the class. Module with undervoltage protection, undervoltage protection into state below 2.5V, can be more better protect the battery, to avoid excessive discharge. Module can modify the fixed resistor adjusts the output voltage can be adjusted up to 12V output, but to ensure that the output power of less than 5W. This module uses TDK multilayer ceramic capacitors as main filter capacitor, the output ripple can be as low as 20mV (5V1A output case)! This module uses a standard USB interface, you can use all universal USB charging mobile phones, MP3, MP4 and other equipment, the perfect support for IPHONE and other mobile phone. Specification: Module properties: Non-isolated step-up module (BOOST) Input voltage: 2.5-6V Output voltage: 4-12 V(Adjustable, the default 5 v) Output current: 1000mA (Max) Efficiency: 92%(Max) (the higher the input voltage, the higher the efficiency) Switching frequency: 1MHz Output ripple: 20mV (MAX) Operating temperature: Industrial (-40°c to +85°c) Voltage regulation: ±2.5% Short circuit protection: None (please use the lithium battery with protection) Input: IN + postive, IN - negative Output: USB output Size: 3 x 1.3 x 0.8 cm Application: This module can be used for DIY mobile power output, enabling single or two ordinary lithium battery to 5V boost to the mobile phone or PSP device charging. DIY a mobile power supply, only need one battery, you can output 5V voltage for your phone, MP3, MP4, PSP charger, very easy. In order to power your electronic devices when your device needs 5V power supply, when you only have lithium battery, this module can be directly step-up to 5V, solve your problems. Note: This module is a fixed 5V output module Modules indicated above IN - (negative input), IN + (positive input), OUT-(negative output), OUT + (positive output) must be connected correctly, otherwise it may cause damage to the module This module has an LED light, when the charge when the LED lights can be used as indicator Package included: 2 x USB boost module

3Pcs 3V To 5V 1A USB Charger DC-DC Converter Step Up Boost Module Features: Module uses the Taiwan production boost chip, high efficiency (up to 92%), plus built-in over-current protection chip, can be more good to protect the module and use the device after the class. Module with undervoltage protection, undervoltage protection into state below 2.5V, can be more better protect the battery, to avoid excessive discharge. Module can modify the fixed resistor adjusts the output voltage can be adjusted up to 12V output, but to ensure that the output power of less than 5W. This module uses TDK multilayer ceramic capacitors as main filter capacitor, the output ripple can be as low as 20mV (5V1A output case)! This module uses a standard USB interface, you can use all universal USB charging mobile phones, MP3, MP4 and other equipment, the perfect support for IPHONE and other mobile phone. Specification: Module properties: Non-isolated step-up module (BOOST) Input voltage: 2.5-6V Output voltage: 4-12 V(Adjustable, the default 5 v) Output current: 1000mA (Max) Efficiency: 92%(Max) (the higher the input voltage, the higher the efficiency) Switching frequency: 1MHz Output ripple: 20mV (MAX) Operating temperature: Industrial (-40°c to +85°c) Voltage regulation: ±2.5% Short circuit protection: None (please use the lithium battery with protection) Input: IN + postive, IN - negative Output: USB output Size: 3 x 1.3 x 0.8 cm Application: This module can be used for DIY mobile power output, enabling single or two ordinary lithium battery to 5V boost to the mobile phone or PSP device charging. DIY a mobile power supply, only need one battery, you can output 5V voltage for your phone, MP3, MP4, PSP charger, very easy. In order to power your electronic devices when your device needs 5V power supply, when you only have lithium battery, this module can be directly step-up to 5V, solve your problems. Note: This module is a fixed 5V output module Modules indicated above IN - (negative input), IN + (positive input), OUT-(negative output), OUT + (positive output) must be connected correctly, otherwise it may cause damage to the module This module has an LED light, when the charge when the LED lights can be used as indicator Package included: 3 x USB boost module

30Pcs Mini 1A Lithium Battery Charging Board Charger Module USB Interface Description: Charging method: linear charge 1% Charging current: 1A adjustable Charge accuracy: 1.5% Input voltage: 4.5V-5.5V Full charge voltage: 4.2V Charging indicator: Red charging green full charge Charging input interface: Mini USB Working temperature: -10°C to +85°C Reverse: NO Size: 25 x 19 x 10mm Note: Ampere meter can only be connected to 5V input end of the module. It is better that the charging current is 37% of the battery capacity. If you charge to the battery of 1000mAH, current of 400 is enough. The connection wire should not be too long. Make sure the connect point is good. If the input voltage is too high, like 5.2V, the current will be less than 1000mA, it is normal. It is protection function, Auto-substract the charging current to avoid burn damage to chip. Input reverse has no effect on the chip, but the output (battery terminals) reverse will burn chips. Applications: This module is used for single-or multi-section parallel lithium lithium rechargeable battery, charging from the USB port to take power. Package included: 30 x 1A lithium battery charging module

Buy Qi Wireless Charging Receiver Charger Module Micro USB Mobile Phone Charger Board for R159.25

Features:   Wide voltage input: DC 7-30w Input over current protection, board 4A fuse Input back protection: Yes Output voltage: USB output, automatically adjusted according to fast charging protocol. 5V/9V/12V and so on Output current: Max 4A, adaptive according to load protocol. Linear pressure compensation, 125mv/A Input overvoltage, undervoltage protection, output overcurrent, overvoltage, undervoltage, short circuit and other functions. Multiple protection, high reliability Over temperature protection: Yes Input connection mode: Soldered line Output fast charging support: BC1.2, QC2.0, QC3.0, MTK PE+1.1, MTK PE+2.0, FCP, SCP, AFC, SFCP   Package Included: 1 x USB Mobile Charger Module    

Buy 5Pcs 3V To 5V 1A USB Charger DC-DC Converter Step Up Boost Module for R169.00

Buy 10Pcs 3V To 5V 1A USB Charger DC-DC Converter Step Up Boost Module for R357.70

Buy 5Pcs 3V To 5V 1A USB Charger DC-DC Converter Step Up Boost Module for R296.18

Features: Input: AC100~240V 50/60Hz Output: DC 5V 4A 5V 2A MAX Offers fast, efficient charging LED light charging indication High efficiency and low energy consumption Protective circuit to prevent overcharging Use your existing USB charge/sync cable for charging 4 USB AC adapter, charge 4 USB devices simultaneously Pocket size, Compact, lightweight, durable, easy to take anywhere Simply plug it into an wall outlet and charge through a proper USB cable To use it with any USB devices, simply connect a USB cable (not included) to your device and then to the charger module, easy to use Ideal for travel,home or office Compatible with most of the USB enable devices including Apple iphone, iPod, Microsoft Zune, cell phone, PDA, digital camera / camcorder and more

Watch Magnetic Charging Module with USB Connector Portable Compact Cable Free Design for Use with Laptops, USB Wall Chargers Power Banks and more Combines MagSafe technology with inductive charging. The Magnetic Charging Module is compatible with Apple Watch Series 4, Series 3, Series 2, Series 1 and (1st generation) Size: 38mm (Diameter) | 13mm (Height) | 53mm (Wide -Including USB Connector) A portable tangle free solution without the hassle of wires. Simply plug into a USB port on your laptop, charger or portable power bank to charge your Watch. - Combines MagSafe technology with inductive charging. The Magnetic Charging Module works with Watch Series 3, Watch Series 2, Watch Series 1 and Watch (1st generation).

Description:   On-board TP4056 Lithium charge management chip  On-board Mini USB head, can direct connect to PC USB charging This board can power by IN+ and IN- too Reserved TEMP pin connector, can as Lithium temperature detection Input voltage: 4V-8V output max charging current: 1000mA The D1 indicator lights when charging, and the D2 indicator lights when charging is complete PCB board size: 37.3 (mm) x15 (mm)   Package included:   5 x TP4056 1A Lithium Battery Charging Board

3.7V Li-ion Battery Mini USB To USB A Power Supply Module 5V 1A Charger Module Features: This PCB also support charging the battery, simply supply a 5V micro USB source to the charging input and it will charge the connected battery to 4.2V. Great for mobile power source using Lithium ion batteries (unprotected is also ok). Connect multiple batteries to the battery input to increase the capacity power capacity. With iphone recognition circuit, can charge iPhone. Protection Circuit: Overcharge protection: 4.3V Overcharge protection release: 4.1V Overdischarge protection: 2.9V Overdischarge protection release: 3V Specification: Charging voltage input: 5V 1A Step up voltage output: 5V 1A max Transient current: 180uA Red LED: Charging Green LED: Charging completed Blue LED: There is a load in the USB Size: 50 x 20 x 9 mm Package include: 1 x USB DC 5V power supply

This Item is Dropshipped !!!!!!!!!!!!!! FREE SHIPPING !!!!!!!!!!!!!! Registered Airmail to your nearest R.S.A Post Ofice on all orders over R300.00 BC-06 is a Bluetooth Car Charger with dual USB port supporting MP3 FM AUX Audio for vehicles. Its high-performance Bluetooth module and built-in mp3/wma decoder chip make it capable of playing music files in U Disk and phones firing into the car stereo via wireless. With this product you can also answer and end Hands-free calls with built-in microphone. BC-06 perfectly ensures you to enjoy the music and Hands-free phone calls while you are driving bringing you much fun and convenience. Features: Adjustable to any angles and fit to all types of vehicles. Paired with phones supports Bluetooth Hands-free can easily answer hang up reject redial calls to ensure driving safety. Echo cancellation and noise suppression (CVC) technology during a call. Support Line audio input connecting phones MP3 MP4 with this car charger by 3.5mm audio cable and then transmitting to car audio via wireless. Support U Disk Player. Supports MP3 WMA format music. Full frequency FM transmitter: adjustable within 87.5-108MHZ. Support LED Digital Display. Support dual USB charger the maximum output is 5V / 2A. It is OK for charging and music playing at the same time. Support automatic power-off memory function to recover the ex-time frequency and song playing information (but if you remove or replace the storage device or system error is detected the system will automatically return to the first song). Specification: Bluetooth version: V2.0 Bluetooth transmission distance: 10M Rated operating voltage: 12V Working voltage limits: 9-26V USB Output: 5V / 2A Working Temp.: 0-50 Audio Format: MP3 WMA SNR: >60dB Distortion: Frequency Response: 20Hz-15KHz Left and right channel separation: >60dB FM Transmission Frequency: 87.5MHz-108MHz Product Size: Approx.11.5 * 2.5 * 2.0cm / 4.53 * 0.98 * 0.79in Product Weight: Approx.33g /1.19oz Package Size: Approx.12.0 * 5.0 * 2.5cm / 4.72 * 1.97 * 0.98in Package Weight: Approx.57g / 1.99oz Package List: 1 * Bluetooth Car Charger 1 * Audio Cable 1 * User Manual   click here to view all items To keep our prices as competitive as possible, all our items are shipped directly from our international suppliers, therefore your package may be inspected at customs. Buyers are responsible for any duties / VAT on this item if any is charged which are collected by SAPO on behalf of SARS and is not included in the price.  Shipping takes 30 to 40 business days and could be delayed due to circumstances out of our control.

Buy Dual USB Output 6-24V To 5.2V 3A DC DC Step Down Power Charger Module Converter for R85.00