Protocol pack

Do not start tags use bold, easy to read headers for machine safety protocol and maintenance use. The objective of do not start tags is to notify staff that the equipment or machine tagged is not to be powered on or started. These do not start tags are useful tools to help protect the health and safety of personnel, but are not a substitute for required protective measures for eliminating or reducing hazards. These durable tags also allow room for handwritten text on both sides. Available in 1 Size: 140mm x 205mm Double Sided Comes as a pack of ten tags.   Comes in one type: ABS (Plastic)

A Danger Do Not Operate Tag has official ANSI headers for safety protocol and compliance. A Danger Do Not Operate Tag is a helpful tool to help protect the health and safety of personnel, and is not a replacement for required protective measures for lessening or removing hazards. Available in 1 Size: 140mm x 205mm Double Sided Comes as a pack of ten tags.   Comes in one type: ABS (Plastic)

Danger do not operate electrical department tags use official OSHA headers for machine safety protocol and compliance. The objective of danger do not operate electrical department tags is to notify staff that there is immediate danger present during attempted use of equipment. These do not operate tags are useful tools to help protect the health and safety of personnel, but are not a substitute for required protective measures for eliminating or reducing hazards. These danger tags comply with the OSHA 1910.145 standard, where the tags indicate an imminently hazardous situation, which, if not avoided, will result in death or serious injury. Available in 1 Size: 140mm x 205mm Double Sided Comes as a pack of ten tags.   Comes in one type: ABS (Plastic)

Caution do not operate this switch tags use official OSHA headers for machine safety protocol and compliance. The objective of caution do not operate this switch tags is to notify staff that moderate or minor injury could occur. These caution do not operate tags are useful tools to help protect the health and safety of personnel, but are not a substitute for required protective measures for eliminating or reducing hazards. These tags comply with the OSHA 1910.145 standard, where the caution tags indicate a hazardous situation that, if not avoided, could result in minor or moderate injury. Available in 1 Size: 140mm x 205mm Double Sided Comes as a pack of ten tags.   Comes in one type: ABS (Plastic)

Danger do not operate unless safety guard is in place tags use official OSHA headers for machine safety protocol and compliance. The objective of danger do not operate tags is to notify staff that there is immediate danger present during attempted use of equipment. These danger do not operate unless safety guard is in place tags are useful tools to help protect the health and safety of personnel, but are not a substitute for required protective measures for eliminating or reducing hazards. These tags comply with the OSHA 1910.145 standard, where the danger tags indicate an imminently hazardous situation, which, if not avoided, will result in death or serious injury. Available in 1 Size: 140mm x 205mm Double Sided Comes as a pack of ten tags.   Comes in one type: ABS (Plastic)

Warning unsafe do not operate tags use official OSHA headers for machine safety protocol and compliance. The objective of warning unsafe do not operate tags is to notify staff that there could be immediate hazard present during attempted use of equipment. These warning do not operate tags are useful tools to help protect the health and safety of personnel, but are not a substitute for required protective measures for eliminating or reducing hazards. These tags comply with the OSHA 1910.145 standard, where the warning tags indicate an potentially hazardous situation, which, if not avoided, could result in death or serious injury. Available in 1 Size: 140mm x 205mm Double Sided Comes as a pack of ten tags.   Comes in one type: ABS (Plastic)

This Danger Pinch Point Keep Back Tag has official ANSI headers for safety protocol and compliance. A Danger Pinch Point Keep Back Tag is a helpful aid for the protection of the health and safety of personnel, and is not an alternative for required protective actions for eliminating or reducing hazards. Available in 1 Size: 140mm x 205mm Double Sided Comes as a pack of ten tags.   Comes in one type: ABS (Plastic)

This Danger Do Not Start Keep Out Tag has official ANSI headers for safety protocol and compliance. A Danger Do Not Start Keep Out Tag is a helpful resource to aid in the protection of the health and safety of staff, and is not an alternative for required protective measures for eliminating or reducing hazards. Available in 1 Size: 140mm x 205mm Double Sided Comes as a pack of ten tags.   Comes in one type: ABS (Plastic)

Caution do not close this valve tags use official OSHA headers for machine safety protocol and compliance. The objective of caution do not close this valve tags is to notify staff that moderate or minor injury could occur from a closing of the valve. These caution do not close this valve tags are useful tools to help protect the health and safety of personnel, but are not a substitute for required protective measures for eliminating or reducing hazards. These tags comply with the OSHA 1910.145 standard, where the caution tags indicate a hazardous situation that, if not avoided, could result in minor or moderate injury. Available in 1 Size: 140mm x 205mm Double Sided Comes as a pack of ten tags.   Comes in one type: ABS (Plastic)

A Caution Do Not Open Valve Tag has official ANSI headers for safety protocol and compliance. A Caution Do Not Open Valve Tag is a helpful resource to help protect the health and safety of personnel, and is not a substitute for required protective measures for reducing or eliminating hazards. Available in 1 Size: 140mm x 205mm Double Sided Comes as a pack of ten tags.   Comes in one type: ABS (Plastic)

A Warning Starts Automatically Tag has official ANSI headers for safety protocol and compliance. A Warning Starts Automatically Tag is a helpful tool to help protect the health and safety of personnel, and is not a replacement for required protective measures for lessening or removing hazards. Available in 1 Size: 140mm x 205mm Double Sided Comes as a pack of ten tags.   Comes in one type: ABS (Plastic)

HP SFP+ Transceiver Module | C8S75A Brand New & Sealed * Original Product * Valid Manufacturer's Guarantee * Fast Delivery HP Product Code: C8S75A Availability: 2 in Stock HP - SFP+ transceiver module - SCSI (pack of 4) - for Modular Smart Array 2040, 2040 10Gb Overview Specifications Product Description HPE - SFP+ transceiver module - GigE, iSCSI Device Type SFP+ transceiver module Packaged Quantity 4 (specifications are for single item) Form Factor Plug-in module Data Transfer Rate 1 Gbps Data Link Protocol GigE, iSCSI Designed For Modular Smart Array 2040, 2040 10Gb Delivery & FAQ's * Metropolitan Areas - Delivery of this item within 3 business days after payment reflects * Outlying Areas - Please allow 5 business days after payment reflects for delivery of this item This item carries a valid manufacturers warranty/guarantee. Manufacturer's Code: C8S75A HP

DESCRIPTION Automotive-grade pack technology and production process to guarantee safety Directional explosion-proof valve design to isolate rarely occurring cell failures, ensuring 100% safety Comprehensive thermal simulation and testing to control the temperature rise of each cell within the designed specifications in the case of high-rate discharge. BATTERY MANAGEMENT SYSTEM (BMS) Separate control and protection for the charge and discharge processes to maximize availability Real-time detection of voltage, current, temperature and a variety of protection Support for parallel connection CELL Lithium Iron Phosphate(LFP) prismatic cells with high safety and reliability Fully automated production following a mature and stable process, ensuring consistent charge/discharge performance and life span Iec62133, U, and UN38.3 certifications COMMUNICATION AND PROTOCOL RS485 and RS232 interfaces Optional accessories: RS485 to SNMP module PRODUCT SPECIFICATIONS Normal Voltage (V) 51.2 Rated Capacity (Ah) 100 Total Energy (Wh) 5120 Recharge Voltage 55.2 Max. Recharge Current (A) 100 For parallel connection, the charge current must be limited to 20A for 50 Ah batteries Max Discharge Current (A) 100 EOD Voltage 44.0 Peak Discharge Power (W) -3s 6720 Dimensions (mm) 430 x x430 x 177 Weight (kg) 51 Protection Class IP20 Working Temperature Recharge: 0 to +55 Discharge -20 to +55 Humidity 0 – 95% RH (non-condensing) Protection Over voltage protection (Cell & System) Low voltage protection (Cell & System) High temperature protection Low temperature protection Short circuit protection Over current protection Parallel or Series Support parallel with RS485 cables connected Cycle Life ? 3500 Cycles @