Kv 930kv flash

PBE-522AC by Ubiquiti incorporates a dish reflector design with proprietary airMAX® ac technology. The PowerBeam™ ac is ideal for CPE deployments requiring maximum performance. The PowerBeam ac directs RF energy in a tighter beam-width. With the focus in one direction, the PowerBeam ac blocks or spatially filters out noise, so noise immunity is improved. This feature is especially important in an area crowded with other RF signals of the same or similar frequency. Specifications: - Processor Specs: Atheros MIPS 74Kc, 560 MHz - Memory: 64 MB DDR2,16 MB Flash - Networking Interface: (1) 10/100/1000 Ethernet Port - Power Supply: 24V, 0.5A Gigabit PoE - Power Method: Passive PoE (Pairs 4, 5+; 7, 8 Return) - Supported Voltage Range: 20-26VDC - Max. Power Consumption: 5.5W - Gain: 22 dBi - Operating Frequency: 5150 - 5875 MHz - Wind Loading: 200.2 N @ 200 km/h - Wind Survivability: 200 km/h - LEDs: (1) Power, (1) LAN, (4) WLAN - Signal Strength LEDs: Software-Adjustable to Correspond to Custom RSSI Levels - Channel Sizes PtP Mode: 10/20/30/40/50/60/80 MHz - Channel Sizes PtMP Mode: 10/20/30/40 MHz - Polarization: Dual Linear - Enclosure: Outdoor UV Stabilised Plastic - Mounting: Pole-Mount Kit Included - ESD/EMP Protection: Air: ± 24 kV, Contact: ± 24 kV - Operating Temperature: -40 to 70° C - Operating Humidity: 5 to 95% Non-condensing - Dimensions: 325 x 325 x 256 mm - Weight: 1.203 kg

The NBE-516AC by Ubiquiti is a high-performance airMAX® ac Bridge. Unlike standard Wi-Fi protocol, Ubiquiti’s Time Division Multiple Access (TDMA) airMAX protocol allows each client to send and receive data using pre-designated time slots scheduled by an intelligent AP controller.   This time slot method eliminates hidden node collisions and maximises airtime efficiency, so airMAX technology provides performance improvements in latency, noise immunity, scalability, and throughput compared to other outdoor systems in its class. Specifications: - Processor Specs: Atheros MIPS 74Kc, 720 MHz - Memory: 128 MB DDR2, 8 MB Flash - Networking Interface: (1) 10/100/1000 Ethernet Port - Power Supply: 24V, 0.5A Gigabit PoE - Power Method: Passive PoE (Pairs 4, 5+; 7, 8 Return) - Max. Power Consumption: 6W - Gain: 16 dBi - Operating Frequency: 5150 - 5875 MHz - Wind Loading: 21.4 N @ 200 km/h - Wind Survivability: 200 km/h - LEDs: (1) Power, (1) LAN, (4) WLAN - Signal Strength LEDs: Software-Adjustable to Correspond to Custom RSSI Levels - Channel Sizes PtP Mode: 10/20/30/40/50/60/80 MHz - Channel Sizes PtMP Mode: 10/20/30/40 MHz - Polarisation: Dual Linear - Enclosure: Outdoor UV Stabilised Plastic - Mounting: Pole-Mount (Kit Included), Wall-Mount - ESD/EMP Protection: Air: ± 24 kV, Contact: ± 24 kV - Operating Temperature: -40 to 70° C - Operating Humidity: 5 to 95% Non-condensing - Dimensions: 140 x 140 x 54 mm - Weight: 0.320 kg

The PBE-522ACISO by Ubiquiti incorporates advanced engineering with proprietary airMAX ac technology. The PowerBeam® ac ISO is ideal for deployments requiring maximum performance and RF isolation. Using airMAX ac technology, the PowerBeam ac ISO supports up to 450+ Mbps real TCP/IP throughput. It's metal-plated interior of rear housing Enhances RF shielding and the built-in mechanical tilt of the mounting bracket offers ± 20° of tilt. Only a single wrench is needed to mount the PowerBeam ac ISO on a pole. Specifications: - Processor Specs: Atheros MIPS 74Kc, 560 MHz - Memory: 64 MB DDR2,16 MB Flash - Networking Interface: (1) 10/100/1000 Ethernet Port - Power Supply: 24V, 0.5A Gigabit PoE - Power Method: Passive PoE (Pairs 4, 5+; 7, 8 Return) - Supported Voltage Range: 20-26VDC - Max. Power Consumption: 5.5W - Gain: 22 dBi - Operating Frequency: 5170 - 5875 MHz - Wind Loading: 210 N @ 200 km/h - Wind Survivability: 200 km/h - LEDs: (1) Power, (1) LAN, (4) WLAN - Signal Strength LEDs: Software-Adjustable to Correspond to Custom RSSI Levels - Channel Sizes PtP Mode: 10/20/30/40/50/60/80 MHz - Channel Sizes PtMP Mode: 10/20/30/40 MHz - Polarization: Dual Linear - Enclosure: Outdoor UV Stabilised Plastic - Mounting: Pole-Mount Kit Included - ESD/EMP Protection: Air: ± 24 kV, Contact: ± 24 kV - Operating Temperature: -40 to 70° C - Operating Humidity: 5 to 95% Non-condensing - Dimensions: 364 x 364 x 276 mm - Weight: 2.55 kg

Please check stock availability before placing order The PBE-522ACISO by Ubiquiti incorporates advanced engineering with proprietary airMAX ac technology. The PowerBeam® ac ISO is ideal for deployments requiring maximum performance and RF isolation. Using airMAX ac technology, the PowerBeam ac ISO supports up to 450+ Mbps real TCP/IP throughput. It's metal-plated interior of rear housing Enhances RF shielding and the built-in mechanical tilt of the mounting bracket offers ± 20° of tilt. Only a single wrench is needed to mount the PowerBeam ac ISO on a pole. Specifications: - Processor Specs: Atheros MIPS 74Kc, 560 MHz - Memory: 64 MB DDR2,16 MB Flash - Networking Interface: (1) 10/100/1000 Ethernet Port - Power Supply: 24V, 0.5A Gigabit PoE - Power Method: Passive PoE (Pairs 4, 5+; 7, 8 Return) - Supported Voltage Range: 20-26VDC - Max. Power Consumption: 5.5W - Gain: 22 dBi - Operating Frequency: 5170 - 5875 MHz - Wind Loading: 210 N @ 200 km/h - Wind Survivability: 200 km/h - LEDs: (1) Power, (1) LAN, (4) WLAN - Signal Strength LEDs: Software-Adjustable to Correspond to Custom RSSI Levels - Channel Sizes PtP Mode: 10/20/30/40/50/60/80 MHz - Channel Sizes PtMP Mode: 10/20/30/40 MHz - Polarization: Dual Linear - Enclosure: Outdoor UV Stabilised Plastic - Mounting: Pole-Mount Kit Included - ESD/EMP Protection: Air: ± 24 kV, Contact: ± 24 kV - Operating Temperature: -40 to 70° C - Operating Humidity: 5 to 95% Non-condensing - Dimensions: 364 x 364 x 276 mm - Weight: 2.55 kg

Please check stock availability before placing order PBE-522AC by Ubiquiti incorporates a dish reflector design with proprietary airMAX® ac technology. The PowerBeam™ ac is ideal for CPE deployments requiring maximum performance. The PowerBeam ac directs RF energy in a tighter beam-width. With the focus in one direction, the PowerBeam ac blocks or spatially filters out noise, so noise immunity is improved. This feature is especially important in an area crowded with other RF signals of the same or similar frequency. Specifications: - Processor Specs: Atheros MIPS 74Kc, 560 MHz - Memory: 64 MB DDR2,16 MB Flash - Networking Interface: (1) 10/100/1000 Ethernet Port - Power Supply: 24V, 0.5A Gigabit PoE - Power Method: Passive PoE (Pairs 4, 5+; 7, 8 Return) - Supported Voltage Range: 20-26VDC - Max. Power Consumption: 5.5W - Gain: 22 dBi - Operating Frequency: 5150 - 5875 MHz - Wind Loading: 200.2 N @ 200 km/h - Wind Survivability: 200 km/h - LEDs: (1) Power, (1) LAN, (4) WLAN - Signal Strength LEDs: Software-Adjustable to Correspond to Custom RSSI Levels - Channel Sizes PtP Mode: 10/20/30/40/50/60/80 MHz - Channel Sizes PtMP Mode: 10/20/30/40 MHz - Polarization: Dual Linear - Enclosure: Outdoor UV Stabilised Plastic - Mounting: Pole-Mount Kit Included - ESD/EMP Protection: Air: ± 24 kV, Contact: ± 24 kV - Operating Temperature: -40 to 70° C - Operating Humidity: 5 to 95% Non-condensing - Dimensions: 325 x 325 x 256 mm - Weight: 1.203 kg