Iv high

Yongnuo YN560 IV YN560IV Universal Wirelss Master Slave Flash Speedlite For DSL Package weight: 0.54 kg Features: YN560 IV=YN560III+YN560-TX, Supports Wireless Master Function. Supports Wireless Slave Function, fully supports YN560-TX, RF-603 II RF-602 Wireless Transmitter. Supports Multiple Trigger Synchronous Mode. Supports setting save automatically, custom settings (fn). Supports ultra-fast charging recycle system, External power supply. Suitable for: For Canon: EOS 5D,5D25D Mark II, 1Ds Mark [IV / III / II / I], 1D Mark [III / II / II / I],7D, 60D,50D, 40D, 30D, 600D, 550D, 500D, 450D, 400D, 350D,300D,1100D,1000D 650D 5D2 5D Mark III 6D For Nikon: D3s, D3x, D3, D700, D300s, D300, D200, D100, D90, D80, D70s,D7100,D7000, D5100, D5000, D3100, D3000, D60, D40X D800, D600 For Olympus: E5, E3, E30, E300, E620, E520, E420, E450, E-P2, E-PL2, E-PL1 For Panasonic: G10GK, GH2GK, GH1GK, G2GK, G1GK, GF2GK, GF1GK For Pentax: K-7, K-x, K-m, K20D, K10D, K200D, K100D For Olympus:E5, E3, E30, E300, E620, E520, E420, E450, E-P2, E-PL2, E-PL1...et For Sony A99 A58 A6000 A3000 A7s A7r A7,NEX-6 Supports Wireless Master & Slave Function The YN560 IV can be used as master unit, provides 3 independent groups with controlling ability, realizing remote control the flash mode, flash output and focal length of the YN560 IV and YN560 III. Supports Wireless Slave Function, fully supports YN560-TX,RF-603(I/II) RF-602 Wireless transmitter One YN560 IV can respectively receive the wireless signal from YN560 IV,YN560-TX,RF-603 (I/II),RF-602,with optional 16 channels; when the YN560 IV and YN560-TX used as transmitter, it can realize remote control the parameter settings. Multiple Trigger Synchronous Mode Supported The YN560 IV can triggered through the set top of the camera, 2.4G wireless triggering, S1 and S2 pre flash cancel mode. Settings Save Automatically, Supports Custom Settings (Fn) The parameters on the flash will automatically save when the flash turned off; the users can customize setting the flash function as needed. GN58 @ ISO100,105mm High Guide Number 2.4G wireless speedlite, supports M/Multi/-- mode. Sound Prompting System When the sound prompting system is enabled, the different sound ways will prompt different operating state of the flash so as to allow you for focus on shooting. Support Electric Zooming Function The flash coverage can be altered between 24~105mm through the [ZOOM] button. Ultrafast Charging Recycle System, Supports External Power Supply Equipped with Big Size LCD Display Screen, Standard PC Synchronous Interface Package Included: 1 x Yongnuo YN560 IV Flash Speedlite Click here for more deals Yongnuo YN560 IV YN560IV Universal Wirelss Master Slave Flash Speedlite For DSL Yongnuo YN560 IV YN560IV Universal Wirelss Master Slave Flash Speedlite For DSL

Descriptions: YN560 IV=YN560III+YN560-TX, Supports Wireless Master Function. Supports Wireless Slave Function, fully supports YN560-TX, RF-603 II RF-602 Wireless Transmitter. Supports Multiple Trigger Synchronous Mode. Supports setting save automatically, custom settings (fn). Supports ultra-fast charging recycle system, External power supply. Suitable for: For Canon: EOS 5D,5D25D Mark II, 1Ds Mark [IV / III / II / I], 1D Mark [III / II / II / I],7D, 60D,50D, 40D, 30D, 600D, 550D, 500D, 450D, 400D, 350D,300D,1100D,1000D 650D 5D2 5D Mark III 6D For Nikon: D3s, D3x, D3, D700, D300s, D300, D200, D100, D90, D80, D70s,D7100,D7000, D5100, D5000, D3100, D3000, D60, D40X D800, D600 For Olympus: E5, E3, E30, E300, E620, E520, E420, E450, E-P2, E-PL2, E-PL1 For Panasonic: G10GK, GH2GK, GH1GK, G2GK, G1GK, GF2GK, GF1GK For Pentax: K-7, K-x, K-m, K20D, K10D, K200D, K100D For Olympus:E5, E3, E30, E300, E620, E520, E420, E450, E-P2, E-PL2, E-PL1...et For Sony A99 A58 A6000 A3000 A7s A7r A7,NEX-6 F eature s: Supports Wireless Master & Slave Function: The YN560 IV can be used as master unit, provides 3 independent groups with controlling ability, realizing remote control the flash mode, flash output and focal length of the YN560 IV and YN560 III. Supports Wireless Slave Function, fully supports YN560-TX,RF-603(I/II) RF-602 Wireless transmitter: One YN560 IV can respectively receive the wireless signal from YN560 IV,YN560-TX,RF-603 (I/II),RF-602,with optional 16 channels, when the YN560 IV and YN560-TX used as transmitter, it can realize remote control the parameter settings. Multiple Trigger Synchronous Mode Supported: The YN560 IV can triggered through the set top of the camera, 2.4G wireless triggering, S1 and S2 pre flash cancel mode. Settings Save Automatically, Supports Custom Settings (Fn): The parameters on the flash will automatically save when the flash turned off; the users can customize setting the flash function as needed. GN58 @ ISO100,105mm: High Guide Number 2.4G wireless speedlite, supports M/Multi/-- mode. Sound Prompting System: When the sound prompting system is enabled, the different sound ways will prompt different operating state of the flash so as to allow you focus on shooting. Support Electric Zooming Function: The flash coverage can be altered between 24~105mm through the [ZOOM] button. Ultrafast Charging Recycle System, Supports External Power Supply: Equipped with Big Size LCD Display Screen, Standard PC Synchronous Interface Package Included: 1 x YONGNUO YN560 IV Universal Speedlite 1 x Protective Bag 1 x Mini Stand 1 x User Manual

Features: YN560 IV=YN560III+YN560-TX, Supports Wireless Master Function. Supports Wireless Slave Function, fully supports YN560-TX, RF-603 II RF-602 Wireless Transmitter. Supports Multiple Trigger Synchronous Mode. Supports setting save automatically, custom settings (fn). Supports ultra-fast charging recycle system, External power supply. Suitable for: For Canon: EOS 5D,5D25D Mark II, 1Ds Mark [IV / III / II / I], 1D Mark [III / II / II / I],7D, 60D,50D, 40D, 30D, 600D, 550D, 500D, 450D, 400D, 350D,300D,1100D,1000D 650D 5D2 5D Mark III 6D For Nikon: D3s, D3x, D3, D700, D300s, D300, D200, D100, D90, D80, D70s,D7100,D7000, D5100, D5000, D3100, D3000, D60, D40X D800, D600 For Olympus: E5, E3, E30, E300, E620, E520, E420, E450, E-P2, E-PL2, E-PL1 For Panasonic: G10GK, GH2GK, GH1GK, G2GK, G1GK, GF2GK, GF1GK For Pentax: K-7, K-x, K-m, K20D, K10D, K200D, K100D For Olympus:E5, E3, E30, E300, E620, E520, E420, E450, E-P2, E-PL2, E-PL1...et For Sony A99 A58 A6000 A3000 A7s A7r A7,NEX-6 Supports Wireless Master & Slave Function The YN560 IV can be used as master unit, provides 3 independent groups with controlling ability, realizing remote control the flash mode, flash output and focal length of the YN560 IV and YN560 III. Supports Wireless Slave Function, fully supports YN560-TX,RF-603(I/II) RF-602 Wireless transmitter One YN560 IV can respectively receive the wireless signal from YN560 IV,YN560-TX,RF-603 (I/II),RF-602,with optional 16 channels; when the YN560 IV and YN560-TX used as transmitter, it can realize remote control the parameter settings. Multiple Trigger Synchronous Mode Supported The YN560 IV can triggered through the set top of the camera, 2.4G wireless triggering, S1 and S2 pre flash cancel mode. Settings Save Automatically, Supports Custom Settings (Fn) The parameters on the flash will automatically save when the flash turned off; the users can customize setting the flash function as needed. GN58 @ ISO100,105mm High Guide Number 2.4G wireless speedlite, supports M/Multi/-- mode. Sound Prompting System When the sound prompting system is enabled, the different sound ways will prompt different operating state of the flash so as to allow you for focus on shooting. Support Electric Zooming Function The flash coverage can be altered between 24~105mm through the [ZOOM] button. Ultrafast Charging Recycle System, Supports External Power Supply Equipped with Big Size LCD Display Screen, Standard PC Synchronous Interface Package Included: 1 x Yongnuo YN560 IV Flash Speedlite

YN560IV 2.4GHz Speedlite: Wireless Transceiver Integrated Fantastic with Three Controlling Groups 2.4GHz Speedlite 560 IV *Supports Wireless Master Function The 560 IV can be used as master unit, provides 3 independent groups with controlling ability, realizing remote control the flash mode, flash output and focal length of the YN560 IV and YN560 III. *Supports Wireless Slave Function, fully supports YN560-TXRF-603I/IIRF-602 Wireless transmitter One 560 IV can respectively receive the wireless signal from 560 IVYN560-TXRF-603 (I/II)RF-602,with optional 16 channels; when the 560 IV and YN560-TX used as transmitter, it can realize remote control the parameter settings. *Multiple Trigger Synchronous Mode Supported The 560 IV can triggered through the set top of the camera, 2.4G wireless triggering, S1 and S2 pre flash cancel mode. *Settings Save Automatically, Supports Custom Settings (Fn) The parameters on the flash will automatically save when the flash turned off; the users can customize setting the flash function as needed. *GN58 @ ISO100105mm High Guide Number 2.4G wireless speedlite, supports M/Multi/-- mode. *Sound Prompting System When the sound prompting system is enabled, the different sound ways will prompt different operating state of the flash so as to allow you focus on shooting. *Support Electric Zooming Function The flash coverage can be altered between 24~105mm through the [ZOOM] button. *Ultrafast Charging Recycle System, Supports External Power Supply *Equipped with Big Size LCD Display Screen, Standard PC Synchronous Interface Including: 1 x 560 IV

Specifications:Circuit design: Insulated Gate Bipolar Transistor (IGBT)Guide No.: 58 (ISO 100, 105mm)Flash mode: M, MultiTriggering mode: Camera set-up,TX, RX, S1, S2Zoom range: 24, 28, 35, 50, 70, 80, 105mmVertical rotation angle: -7~90 degreesHorizontal rotation angle: 0~270 degreesPower supply: 4* AA size batteries (not included)Lighting times: 100~1500 times (AA alkaline cell used)Recycle time: approx. 3s (AA alkaline cell used)Color temperature: 5600kFlash time: /200s~1/20000sFlash control: 8 levels of output control (1/128~1/1), 29 levels of fine tuningExternal interface: hot shoe, PC port and external charging portWireless triggering distance: 20~25m indoor, 10~15m outdoor, 100m(2.4G wireless)Additional features: The electronic flash head zooming, sound prompt, PC prot, power saving mode, overheating protection and auto save settingsItem size: 20 * 7 * 5.5cm / 7.9 * 3.0 * 2.2inItem weight: 366g / 12.9ozPackage size: 21 * 10 *.5cm / 8.3 * 3.9 * 3.3inPackage weight: 541g / 1.19Lbs Features:*Supports Wireless Master Function: The YN560 IV can be used as master unit, provides 3 independent groups with controlling ability, realizing remote control the flash mode, flash output and focal length of the YN560 IV and YN560 III. *Supports Wireless Slave Function, fully supports YN560-TX, RF-603(I/II), RF-602 Wireless transmitter:One YN560 IV can respectively receive the wireless signal from YN560 IV, YN560-TX, RF-603 (I/II), RF-602 with optional 16 channels; when the YN560 IV and YN560-TX used as transmitter, it can realize remote control the parameter settings. *Multiple Trigger Synchronous Mode Supported: The YN560 IV can triggered through the set top of the camera, 2.4G wireless triggering, S1 and S2 pre flash cancel mode. *Settings Save Automatically, Supports Custom Settings (Fn):The parameters on the flash will automatically save when the flash turned off; the users can customize setting the flash function as needed.*GN58 @ ISO100, 105mm:High Guide Number 2.4G wireless speedlite, supports M/Multi/--mode. *Sound Prompting System:When the sound prompting system is enabled, the different sound ways will prompt different operating state of the flash so as to allow you focus on shooting.*Support Electric Zooming Function: The flash coverage can be altered between 24~105mm through the [ZOOM] button.*Ultrafast Charging Recycle System, Supports External Power Supply. *Equipped with Big Size LCD Display Screen, Standard PC Synchronous Interface.

Buy 305D IV Switching DC Power Supply 220V 0-30V 0-5A High Precision Laboratory DC Voltage Current Regul for R2,104.71

INSEESI-IN560-IV flash Speedlight for Canon   Description  High sensitivity wireless triggering sensor makes S1 and S2 mode can be used in outdoor environment and the wireless triggering distance is as long as 15m. Sound prompt function, different sounds indicate working situations and helps you focus on shooting (Note: the sound can be closed).Provides PC port, you can make the flash synchronously by connecting to the PC port. Super speed of charging recycle: it only takes 3 seconds in charging after full power output. Even without new batteries, you can get the supercharging speed that it only needs 4~5 seconds; In addition, you can use the external power pack to accelerate charging speed once more. Specifications: Circuit design  -  Insulated Gate Bipolar Transistor (IGBT) Guide No.  -  50 (ISO 100) Flash modes  -   M, S1, S2, LED Vertical rotation angle  -     -7~90 degrees Horizontal rotation angle  -   0~270 degrees Power supply  -   4 * AA batteries (not included) Lighting times  -   100~1500 times Recycle time  -   approx. 3s Color temperature   -  5600k Flash time   -  1/200s~1/20000s Flash control  -   8 levels of output control (1/128~1/1), 29 levels of fine tuning External interface   -  hot shoe, PC port Wireless triggering distance  -   10~15m Additional features   -  sound indicator, automatically saving, PC port, power saving mode and overheating protection Dimensions   -  approx. 190 * 78 * 60mm (Extended state) Net weight   -  310g  Package size   -  21 * 9.5 * 8cm Package weight   -  Approx. 450g Note: To avoid fire or electrical shock, do not expose this  device to rain or moisture. To avoid short circuit, be sure the batteries contacts are  securely packed and in a accordance with local provision  when handing the batteries. Please keep the batteries and the parts away from children.  Small parts may cause choking or serious injury if  swallowed. Prohibit to shoot eyes directly in case of injury. Do not disassemble or service this product by yourself.  Touching the internal high voltage circuit will cause  electric shock. Suitable for: Package Includes: 1 x IN560 IV flash 1 x Protecting bag 1 x Flash Stand 1 x Manual I ONLY POST TO ADDRESSES IN SOUTH AFRICA - NO INTERNATIONAL SALES

foluu-newest-5d-mark-iv-case-silicone-rubber-protective-shockproof-dust-dirt-proof-anti-slip-sweat-p Product Description Compatible with Canon EOS-5D Mark IV (5D4) Only Using High Quality Silicon Material, Give excellent protection for the Camera special surface treatment, Soft Hand Touch, Protect the Camera from Dust, Dirt, Slip,Oil, sweat The product is just the Silicon Case, the Camera is excluding. Trustful Partner for your Lovely Camera, together with your in your journeyFoluu is a professional supplier and design for Electronic Accessories. We offer high quality protection products for your device. Please feel free to contact with us if you have any questions on our products Our Guarantee to You We guarantee the utmost in Quality, Authenticity and Customer Satisfaction All our Items are Brand New and 100% Authentic with Original Box and Papers Price Beat or Match, if we can't (which is hardly ever), we will give you R150 off your next order with us. At these prices stocks are very limited, so order now to avoid disappointment Please view our other listings HERE Looking for something that we have not listed. Let us know - Will will get the best price for you

Canon EOS 5D Mark IV Kit (24-105 II) PRODUCT HIGHLIGHTS 30.4MP Full-Frame CMOS Sensor DIGIC 6+ Image Processor 3.2" 1.62m-Dot Touchscreen LCD Monitor DCI 4K Video at 30 fps; 8.8MP Still Grab 61-Point High Density Reticular AF Expanded ISO 102400; 7 fps Shooting Dual Pixel RAW; AF Area Select Button Dual Pixel CMOS AF and Movie Servo AF Built-In GPS and Wi-Fi with NFC EF 24-105mm f/4L IS II USM Lens

Canon EOS 5D Mark IV Body PRODUCT HIGHLIGHTS 30.4MP Full-Frame CMOS Sensor DIGIC 6+ Image Processor 3.2" 1.62m-Dot Touchscreen LCD Monitor DCI 4K Video at 30 fps; 8.8MP Still Grab 61-Point High Density Reticular AF Expanded ISO 102400; 7 fps Shooting Dual Pixel RAW; AF Area Select Button Dual Pixel CMOS AF and Movie Servo AF Built-In GPS and Wi-Fi with NFC

Canon EOS 5D Mark IV Body (kit box) PRODUCT HIGHLIGHTS 30.4MP Full-Frame CMOS Sensor DIGIC 6+ Image Processor 3.2" 1.62m-Dot Touchscreen LCD Monitor DCI 4K Video at 30 fps; 8.8MP Still Grab 61-Point High Density Reticular AF Expanded ISO 102400; 7 fps Shooting Dual Pixel RAW; AF Area Select Button Dual Pixel CMOS AF and Movie Servo AF Built-In GPS and Wi-Fi with NFC

Description: FY2300 series Dual Channel Function/Arbitrary Waveform Generator is a multifunctional signal generator product integrating Function Signal Generator, Arbitrary Waveform Generator, Pulse Signal Generator, Noise Signal Generator, Counter and Frequency Meter with excellent cost performance. This instrument adopts large scale CMOS integrated circuit and high speed MCU microprocessor. The internal circuit uses SPXO as the basic standard to guarantee the stability of signals. Surface mounting technology improves interference immunity and operational life span. This instrument has double channels can output 31 preseted DDS signals including Sine, Square, Triangle(Ramp), Rise Sawtooth, Fall Sawtooth, Lorenz Pulse, Multitone, Noise, Cardiogram, Trapezoidal Pulse, Sinc Pulse, Narrow Pulse, Gauss White Noise, AM, FM, Step and user-defined waveform. It can also output TTL electric level. Both channels are completely independent. It has friendly human-machine mutual interface. 2.4 inch TFT Color LCD with 320×240 resolution can display all the parameters of both channels and current functions of all buttons. Shortcut keys simplify all complicated operations and save time. Users can be proficient after several minutes practice. The advantages of this instrument in signal generating, waveform sweeping, parameter measurement and other fields, make it to be the ideal equipment for electronic engineers, laboratories, industry producing line, university, R&D institutes and so on. Features: I. Adopt DDS technology to generate accurate, stable signal with low distortion. II. Portable design with top grade aluminum alloy shell. Use DC5V power adopter or 5V portable power for power supply. III. 2.4 inch TFT Color LCD with 320×240 resolution can display all the parameters of both channels and current functions of all buttons. IV. Frequency output of Sine wave can be up to 25MHz. 200MSa/s sampling rate. 12 bits vertical resolution. V. Complete independent dual channels can work at same time and phase difference is adjustable.VI. Following function allows users to synchronize all or partial parameters of CH2 to CH1. VII. Two instruments or more can be synchronized by TTL_IO interface. VIII. Various Waveform: Sine. Square. Triangle/Ramp. Rise Sawtooth. Fall Sawtooth. Lorenz Pulse. Multitone. Noise. Electrocardiogram (ECG). Trapezoidal Pulse. Sinc Pulse. Narrow Pulse. Gauss White Noise. Step Triangle. Positive Step.

Description: FY2300 series Dual Channel Function/Arbitrary Waveform Generator is a multifunctional signal generator product integrating Function Signal Generator, Arbitrary Waveform Generator, Pulse Signal Generator, Noise Signal Generator, Counter and Frequency Meter with excellent cost performance. This instrument adopts large scale CMOS integrated circuit and high speed MCU microprocessor. The internal circuit uses SPXO as the basic standard to guarantee the stability of signals. Surface mounting technology improves interference immunity and operational life span. This instrument has double channels can output 31 preseted DDS signals including Sine, Square, Triangle(Ramp), Rise Sawtooth, Fall Sawtooth, Lorenz Pulse, Multitone, Noise, Cardiogram, Trapezoidal Pulse, Sinc Pulse, Narrow Pulse, Gauss White Noise, AM, FM, Step and user-defined waveform. It can also output TTL electric level. Both channels are completely independent. It has friendly human-machine mutual interface. 2.4 inch TFT Color LCD with 320×240 resolution can display all the parameters of both channels and current functions of all buttons. Shortcut keys simplify all complicated operations and save time. Users can be proficient after several minutes practice. The advantages of this instrument in signal generating, waveform sweeping, parameter measurement and other fields, make it to be the ideal equipment for electronic engineers, laboratories, industry producing line, university, R&D institutes and so on. Features: I. Adopt DDS technology to generate accurate, stable signal with low distortion. II. Portable design with top grade aluminum alloy shell. Use DC5V power adopter or 5V portable power for power supply. III. 2.4 inch TFT Color LCD with 320×240 resolution can display all the parameters of both channels and current functions of all buttons. IV. Frequency output of Sine wave can be up to 25MHz. 200MSa/s sampling rate. 12 bits vertical resolution. V. Complete independent dual channels can work at same time and phase difference is adjustable.VI. Following function allows users to synchronize all or partial parameters of CH2 to CH1. VII. Two instruments or more can be synchronized by TTL_IO interface. VIII. Various Waveform: Sine. Square. Triangle/Ramp. Rise Sawtooth. Fall Sawtooth. Lorenz Pulse. Multitone. Noise. Electrocardiogram (ECG). Trapezoidal Pulse. Sinc Pulse. Narrow Pulse. Gauss White Noise. Step Triangle. Positive Step. Inverse Step. Positive Exponent. Inverse Exponent. Positive Falling Exponent. Inverse Falling Exponent. Positive Logarithm.

30.4MP Full-Frame CMOS Sensor DIGIC 6+ Image Processor 3.2" 1.62m-Dot Touchscreen LCD Monitor DCI 4K Video at 30 fps; 8.8MP Still Grab 61-Point High Density Reticular AF Native ISO 32000, Expanded to ISO 102400 Dual Pixel RAW; AF Area Select Button Dual Pixel CMOS AF and Movie Servo AF 7 fps Shooting; CF & SD Card Slots Built-In GPS and Wi-Fi with NFC

Cameras | Lenses | Video | Bags | Tripods | Flashes | Lighting The white NX300 Mirrorless Digital Camera with mm f/ OIS Lens from Samsung offers a 20.3MP APS-C CMOS sensor and the DRIMe IV image processing engine for sharp, low-noise images with accurate colors and is combined with a compact mm zoom lens and a hot shoe mount flash unit. The DRIMe IV image processing engine enables fast performance and provides support for the camera's Full HD p 60 fps video capture and wide ISO range of . In addition, thanks to the DRIMe IV, the NX300 is capable of 3D photo and video capture when used with the optional 45mm f/1.8 2D/3D lens. The NX300 features a fast Hybrid Auto-focus system that combines phase-detection AF with contrast-detect AF. It's capable of continuous burst shooting of up to 8.6 fps and a shutter speed as quick as of a second. A large, tiltable 3.31" touch screen OLED monitor provides accurate and well-defined 800 x 480 resolution images for live view composition and playback and it's capable of touch menu control and touch auto focus control. The NX300 provides RAW format capability and full manual control but also offers Filter Effects such as watercolor, miniature effect and vignetting. With fast dual-channel Wi-Fi instant image sharing is possible via the Samsung SMART CAMERA App. Simply download the app to your smartphone or tablet and the NX300 will automatically detect your device and instantly transfer images to your phone or tablet for sharing. The SMART CAMERA App also allows for functions like Direct Link which send photos directly from your camera to social sites like Facebook, and Remote Viewfinder which allows you to use your smartphone as the camera's viewfinder and remote control. A retro viewfinder form factor gives this camera a distinctive look and its dimpled, ergonomically designed grip offers comfort and easy access to its controls. The NX300 is compatible with the complete line of NX mount lenses. This kit includes the f/ OIS lens which is a compact zoom lens with Optical Image Stabilization (OIS) to compensate for the blurring effects of camera shake and provide sharp images even in low light settings. The lens has a 35mm focal length equivalency of mm which is an ideal range for everyday shooting with wide-angle to short telephoto capability. As an intuitive i-Function lens, it allows you to control the camera's manual settings via a ring on the lens and offers image preview in real time. Also included with the NX300 is the SEF-8A flash unit which mounts to the camera's hot shoe. This compact flash, with a Guide Number of 8, flips up to turn on and flips back down to turn off. Adobe Lightroom software is also bundled with the NX300 and mm f/ lens. 20.3MP APS-C CMOS Sensor The new 20.3MP sensor in the NX300 offers sharp imaging and accurate colors in a range of lighting conditions. DRIMe IV Imaging Engine The DRIMe IV image processor provides fast performance, lifelike color reproduction and low noise imaging when utilizing high sensitivity ISO settings. It also provides support for the camera's p HD video and 3D photo and video capability. Included f/ OIS Lens Included with the NX300 is the f/ OIS lens which is a compact zoom lens with lens-shift Optical Image Stabilization (OIS) to compensate for the blurring effects of camera shake and provide sharp images even in low light settings. The lens has a 35mm focal length equivalency of mm which is an ideal range for everyday shooting with wide-angle to short telephoto capability. As an intuitive i-Function lens, it allows you to control the camera's manual settings via a ring on the lens and offers image preview in real time. 3.31" AMOLED Tilt Touch Screen Display A large, clear 3.31" LED screen provides composition and playback viewing with 800 x 480 resolution. The screen can be tilted up for easy viewing and to provide greater flexibility when shooting and it is enabled with touch screen menu control and touch auto-focus control. Dual-Channel Wi-Fi Connectivity and SMART CAMERA App With fast dual-channel Wi-Fi, the NX300 utilizes the Samsung SMART CAMERA App to transfer images to your Android or iOS smartphones or tablets for instant sharing. The SMART CAMERA App also provides other functions to streamline your image sharing and allows your device to be used as a remote viewfinder. Auto Backup via Wi-Fi offers easy and instant transfer of images to your computer. Full HD p Video Full HD p Video is available at and 24 fps, as is 3D video when utilizing the 45mm f/1.8 2D/3D lens. 3D Photo and Video Capture In combination with the new (optional) Samsung 45mm f/1.8 2D/3D lens, the NX300 can capture and process 3D photographs and videos. The single 45mm lens can adjust between standard 2D and 3D modes to provide realistic 3D imaging that can be viewed on 3D-enabled viewing devices. Hybrid Auto Focus System The NX300 features a fast and accurate hybrid auto focus system that combines phase and contrast detection auto focus. ISO Sensitivity A wide ISO range offers low-noise imaging in all lighting conditions. Burst Shooting and Shutter Speed The NX300 allows for continuous shooting of up to 8.6 fps and a shutter speed that ranges from 30 seconds to of a second. Retro Design A handsome retro viewfinder design and ergonomic grip provide easy handling and access to controls as well as a stylish look. SEF-8A Flash Unit Also included with the NX300 is the SEF-8A flash unit which mounts to the camera's hot shoe. This compact flash, with a Guide Number of 8 at ISO 100, flips up to turn on and flips back down to turn off.

Descriptions: GN66@ ISO100,199mm,high guide number 2.4G wireless speedlite,supports M/Multi/-- mode. Supports wireless master control function,realize six groups of light control YN660 can be used as master control unit,be equipped with six groups of independent grouping control ability, realize remote control the flash mode,output and focal length of YN660,YN560 IV,YN560III. Supports wireless slave function, fully supports the YN660,YN560 IV,YN560-TX,RF605,RF603 (II),RF602 wireless transmitter One YN660 can respectively accept the signal transmitted from the YN660,YN560 IV,YN560-TX,RF605,RF603 (II),RF602 wireless transmitter,with 16 channels for option; when the YN660,YN560 IV and YN560-TX used as transmitter,it can realize remote flash parameter adjustment. Multiple flexible trigger synchronous ways,YN660 can be triggered through the camera,2.4G wireless triggering,S1 and S2 pre flash trigger avoidance. Supports automatically save settings and custom settings Fn,the parameters on the flash will automatically save when the flash turned off; the users can customize setting the flash function as needed. Specifications: Circuit design: Insulated Gate Bipolar Transistor (IGBT) Guide NO: 66 (ISO 100, 199MM) Flash Mode: M / Multi Trigger Mode: Camera Set-top, TX, RX S1 S2 Zoom Range: 20 24 28 35 50 70 80 105 135 199mm Vertical rotation angle: 70-90 degrees Horizontal rotation angle: 0-360 degrees Power supply: 4 x AA size batteries (Alkaline or Ni-MH battery) Lighting Times: 100-1500 TIMES (AA alkaline cell used) Recycle time: Approx 3s (AA alkaline cell used) Color Temperature: 5600k Flash Time: 1/200s - 1/20000s Flash Control: 8 levels of output control (1/128 1/1),29 levels of fine tuning External Interface: External power inferface, PC port, hot shoe Wireless Trigger distance: 20-25m indoor, 10-15m outdoor 2.4Gradio transmission distance will up to 100m Suit for: For Canon Nikon Pentax Olympus Panasonic DSLR Camera with Standard Hot shoe Yongnuo RF-605, RF-603 I/II, RF-602, YN622C, YN622C II, YN622N, YN622N II, YN560-TX Yongnuo YN-560 III, Yongnuo YN-560 IV, YN660 Package Included: 1 x YN-660Flash light 1 x protecting bag 1 x mini stand 1 x manual book

Yongnuo YN685 GN60 Wireless Flash Speedlight Slave TTL HSS Built-in Trigger System for Canon Description: New function compared with YN600EX-RT is, YN685 has the two built-in Wireless Trigger systems, YN-622C system and RF-603 sytem, it can receive the wireless trigger singnal from YN-622C,YN-622C-TX, YN-560 IV, YN560-TX, RF-603 II, RF-605, so you can trigger more than two off camera flashs in manual mode, TTL mode, multi mode, and even remtoe control the each group' flash in flash mode, flash output, focal length and focal length synchronization Function: Wireless Slave Mode 622C Wireless System (there are total 7 channels and 3 groups) Remote Control mode: the remote control mode of YN685 is compatible with the master unit is YN622C-TX, the master unit is YN-622C, and the YN-622C has been enabled the remote control mode. Mix mode: the remote control mode of YN685 is compatible with the master unit is YN-622C, and the YN-622C has been enabled the mix mode RF-603 Wireless System (there are total 16 channels and 6 groups) It can receive the wireless trigger signal from YN-560 IV, YN560-TX, RF-605, RF-603 II Multi-flash Wireless Flash Configuration Wireless flash of two slave units made up by YN685 Wireless flash of multiple slave units made up by YN685 ETTL, M, MULTI Mode GN60 at ISO100, 200m --- 2.4G wireless Speedlight of high guide number Power Saving Mode Overheat protection Modelling Flash PC Sync Port Automatic Setting Saving Clear Settings High-speed Sync, Second-curtain Sync, Flash Exposure Compensation, Exposure Bracketing (FEB), FE Lock The flash Rang Setting High-speed Continuous Shooting Auto / Manual Zooming Ultrafast Charing Recycle System, supporting External Power Supply Features: WITH TRANSMITTTER – YN-622C / YN-622C-TX ETTL /M / Multi HSS to 1/8000th 1st Curtain Sync / 2nd Curtain Sync FEC / FEB – 1/3rd Increments (±3 stops) Remote Flash Power – 1/128 – 1/1 (1/3rd increments) Remote Flash Zoom 20-200mm – Auto and Manual Group Control WITH TRANSMITTER – YN560 IV / YN560-TX Remote Flash Power – 1/128 – 1/1 (1/3rd increments) Remote Flash Zoom 20-200mm – Auto and Manual Group Control WITH TRANSMITTER – RF-605 Fire the Flash Group Control WITH TRANSMITTER – RF-603 II / RF-603 Fire the Flash Only Specifications: Circuit design Insulated Gate Bipolar Transistor (IGBT) Guide NO 60 (ISO 100, 200MM) Flash Mode ETTL M Multi Trigger Mode Set-top, wireless off-camera Zoom Range Auto, 20 24 28 35 50 70 80 105 135 200mm Vertical rotation angle 70-90 degrees Horizontal rotation angle 0-360 degrees Power supply 4*AA size batteries (Alkaline or Ni-MH battery) Lighting Times 100-1500 TIMES (AA alkaline cell used) Recycle time Approx. 3s (AA alkaline cell used) Colour Temperature 5600k Flash Time 1/200s - 1/20000s Flash Control 8 levels of output control (1/128 1/1), total of 2+9 levels of fine tuning External Interface External power interface, PC port, hot shoe Wireless Trigger distance 100m Compatible with: 1), Hot shoe TTL mode: Canon 1Dx, 1Ds series, 1D series, 5DIII, 5DII, 5D, 7D, 7DII 70D, 60D, 50D, 40D, 30D, 20D, 700D, 750D 650D/T4i, 600D/T3i, 550D/T2i, 500D/T1i, 450D/Xsi, 400D/Xti, 350D,100D, 1100D, 1000D, 1200D 2), Wireless TTL Slave mode: Canon 5DIII 7D 70D 60D 700D 650D 600D, Yongnuo ST-E2, Canon 580EX II Nikon SB-910, SB-900, SB-800, SB-700, Commander SU-800, Camera with CLS i-TTL system:D4, D3x, D3s, D3, D2x, D700, D300s, D300, D200, D7000, D90, D80 3), Wireless Manual (RF-603 mode): Yongnuo YN-560IV, YN560-TX, RF-605, RF-603 II ALL DSLR Standard Hot shoe Camera Package Included: 1 x YN685 Flash Speedlight for Canon Version 1 x Manual in English 1 x Flash Stand I ONLY POST TO ADDRESSES IN SOUTH AFRICA - NO INTERNATIONAL SALES

Generic USB Charger for Canon LP-E6, LP-E6N, LC-E6 (EOS 5DII, III, IV; 6D I & II; 7D I, II; 60D; 70D; 80D) Features: High charging efficiency. Overload & short-circuit protection. Foldable AC plug is designed to save space and to carry conveniently. Smart LED charging status indicator.(Red: Charging, Green: Fully Charged) AC/DC output for both home and travel use. USB Port, good for charging with computer, laptop, power bank etc.  Specification: Input: DC 5V Output: DC 8.4V 400mA~600mA Charing Time:2-3 hours Fit for:  Canon LP-E6, LP-E6N, LC-E6 (EOS 5DII, III, IV; 6D I & II; 7D I, II; 60D; 70D; 80D) Package Includes: 1x Charger 1x USB Cable I ONLY POST TO ADDRESSES IN SOUTH AFRICA - NO INTERNATIONAL SALES

Generic USB Charger for Canon LC-E6 / LP-E6 (EOS 5DII, III, IV; 6D I & II; 7D I, II; 60D; 70D; 80D) Features: High charging efficiency. Overload & short-circuit protection. Smart LED charging status indicator.(Red: Charging, Green: Fully Charged) AC/DC output for both home and travel use. USB Port, good for charging with computer, laptop, power bank etc.   Specification: Input: DC 5V Output: DC 8.4V 400mA~600mA Charing Time:2-3 hours Fit for:  Generic USB Charger for Canon LC-E6, LP-E6, LP-E6N, 6D I & II, 7D I & II; 60D; 70D; 80D 5D Mk II,III & IV Package Includes: 1x Charger 1x USB Cable I ONLY POST TO ADDRESSES IN SOUTH AFRICA - NO INTERNATIONAL SALES

ultra-light-protective-neoprene-camera-case-bag-with-carabiner-by-neopine-for-sony-cyber-shot-dsc Product Description Protective and high quality Neoprene material and foam padding for protection. Protects camera from dust, dirt, scratches, bumps, and moisture. ￯﾿ﾽUltra Light￯﾿ﾽ and compact case, made for easy carrying. Manufactured for Sony Cyber-shot DSC-RX100 V, DSC-RX100M IV, DSC-RX100 III, DSC-RX100 II Digital Cameras The tough material will resist stretching out of shape, along with water. Handmade stitches design for a unique look. Available in two colors Soft and Smooth-feeling! Internal soft layer protects LCD screen from scratches and bumps 1 Year TechCare Manufacturer Limited Replacement Warranty. The warranty from TechCareGear will ensure continuous protection for your camera. The case comes with an edge to edge, perfect fit Tempered Optical Glass screen protector and a cleaning cloth"Ultra Light" Neoprene Protective Camera Case is specially manufactured forSony Cyber-shot DSC-RX100 V, DSC-RX100M IV, DSC-RX100 III, DSC-RX100 II cameras. The case features a high quality neoprene designed to keep your camera safe and free of scratches. The case was created for photography enthusiasts in mind and that is why, while your camera is stored in the case, all you'll have to do is pull open the specially designed back cover and take your camera out. This exclusive camera case designed to protect your digital camera from bumps, dust, scratches and jostles. Its unique design provides quick and easy access to your gear. The case comes with a Caraniner, an edge to edge-perfect fit Tempered Optical Glass screen protector and a cleaning cloth. There are many cases out there however only the TechCare case is the best of those that you will absolutely love to have. *TechCareGear will replace only the cases/bags that become unusable due to a defect or malfunctioning occurs in normal conditions. The warranty does not cover cases/bags that have a defect or malfunction due to improper care, mishandling, misuse, alteration, or accidental damage; nor does it cover the natural breakdown of materials that occurs after extended use. If your product is no longer available, we will replace it with a similar product of equal value. This warranty is only for the cases/bags that we sell and we do not provide any warranty for personal property. We only promise to repair or replace the TechCare cases/bags that is sold in amazon.com by TechCareGear. Our Guarantee to You We guarantee the utmost in Quality, Authenticity and Customer Satisfaction All our Items are Brand New and 100% Authentic with Original Box and Papers Price Beat or Match, if we can't (which is hardly ever), we will give you R150 off your next order with us. At these prices stocks are very limited, so order now to avoid disappointment Please view our other listings HERE Looking for something that we have not listed. Let us know - Will will get the best price for you

Yongnuo YN-622C II E-TTL wireless flash trigger for Canon Specifications: Compared to the first version, YN-622C Mark II has more functions: The quick lock design, you can fasten the hot shoe of this flash trigger with your camera or flash. It supports USB Firmware upgraded. It supports 622C communication mode (YN-622C and YN-622C-TX) and (RF-605C, RF-603 II and YN560-TX) --- TTL mode, you can use YN-622C II, YN-622C, Canon version together, and when you use it with YN-622C-TX, it can be used as receiver. --- Manual mode,you can use YN-560TX, RF-603 II, RF-605C as transmitter, and use YN-622C II as receiver. Main functions: --- Quick Lock Design --- USB Firmware Upgrade --- YN-622C Communication and YN560-TX Communication mode --- flash mode: E-TTL (II) / Manual / Multi --- 1st Curtain, 2nd curtain, High Speed Sync (HSS / FP), Max 1 / 8000s Sync Speed --- Control Remote flash using camera's falsh control menu screen (Remote Control mode) --- E-TTL / Manual / Multi Flash mode mix using (Mix Control Mode) --- Flash on hot shoe of transmitter supports ETTL --- Flash Exposure compensation (FEC) --- Flash Exposure Bracketing (FEB) --- Flash Exposure Lock (FEL) --- modeling flash --- E-TTL Group ratio (ALL / A:B / A:B:C) --- Manual / Multi Group (ALL / A:B / A:B:C) --- flash zooming (auto, manual) --- AF assist beam emitter (AF Lamp) --- PC port Triggering strobe flashes and 1st, 2nd curtain / HSS --- LCD Live View triggering --- High-speed continuous shooting trigger --- Settings saved automatically --- Compatible with ALL Yongnuo / Canon EX II series flashs --- Single-contact of camera and flash triggering (Max sync. speed is 1/250s) --- Groups: A/B/C 3groups (YN-622C), A/B/C/D/E/F 6groups (YN560-RX) --- AA *2 (Support 1.2V rechargeable batteries) (Not Included) Note: Mark II has a PC Sync port for YN-622C transceiver, you can use RF-602 PC / PC Cable to connect it with flash, and use RF-603 II 6.35mm cable to work with Strobe flash. Suitable for: Camera: A: The Canon EOS DSLR camera with external flash control menu: Canon Canon 7D, 7D Mark II, 6D, 6D Mark II, 5D Mark II, 5D Mark III, 5D Mark IV, 1Ds Mark III, 1D Mark IV, 1D Mark III, 7D 60D 50D 40D 450D 500D 550D 600D 650D 700D 1000D 1100D 1200D 1300D B: The Canon EOS DSLR Camera without external flash control manual: Canon EOS 5D 10D 20D 30D 300D 350D 400D 1D 1D Mark II Flash: Compatible ETTL Flash: (It supports wireless remote control through camera menu) Canon 600EX (RT), 580EX II, 430EX II, 320EX, 270EX II Yongnuo YN600EX-RT, YN-568EX II, YN-565EX II C, YN-468 II C, YN-467 II C. Note: 430EX, 550EX and 580EX or other parts of flash is not supported remote control via the camera menu, you need to manually set the flash parameters. It also compatible with Yongnuo RF-605C, RF-603 II, YN560-TX in manual mode. Package including: 2 x RF-622C II transceivers 1 x Instruction Manual in English 1 x Original Yongnuo Box I ONLY POST TO ADDRESSES IN SOUTH AFRICA - NO INTERNATIONAL SALES

SINGLE Yongnuo YN-622C Wireless e-TTL Flash transceiver for Canon NEW Yongnuo YN-622C Wireless e-TTL Flash transceiver / Flash Trigger Supports High-speed Sync HSS for Canon Flash Speedlight to 1/8000s Features: Recommended use with YN-568ex HSS flash Speedlight for Canon Specification: Using Digital FSK 2.4GHz frequency band with 7 channels, it has three modes: i-TTL, Manual and RPT, and it can fire flashes at 360 degree direction, the operating range is 100 metres. It supports FEC, FVL, High-speed Sync, Front Curtain, Rear Curtain, modelling flash, i-TTL, Manual/RPT, Manual mode, Auto Zooming, AF Lamp. Main function: a) Support Full I-TTL Pass-through function when on camera 1)  Mount one YN-622N transceiver into the hot shoe of camera, and mount other transceiver into the hot shoe of flash, you can trigger the flash at any direction in TTL, Manual or RPT mode. 2)  Mount flash on hot shoe of YN-622N transceiver on camera, mount the second flash on other transceiver, both of flashes can be trigger at any direction in TTL, Manual or RPT mode. Note: Speedlight on hot-shoe of transmitter support i-TTL/ Manual / RPT b)  Shutter Sync 1)  High-speed Synchronous. The max. sync speed is 1/8000s, but some camera is just 1/4000s, and for those cameras and flashes who don't support HSS, the sync. speed is just 1/250s or less, different cameras have different Sync speed. 2)  Front Curtain Sync 3)  Rear Curtain Sync. c)  Remote Control Function The parameter of flashes on hot shoe of receivers can be set up remotely through the camera manual directly. d)  Supporting mixed mode. FEC; FVL Ratio and Shutter sync can be set in the camera side. Manual and Multi output need to be set on the flash Speedlight. e)  Work with Strobe Studio flash light in HSS function f)  Awaking function g)  Zoom Function h)  Support Single-contact of camera and flash triggering (the max. Sync. speed is 1/250s) i)  Flash Fire Ratio with e-TTL j)  Support 2pcs AA batteries, (1.2v rechargeable battery)  Stand-by time is 60hours. k)  Dimension: 89.5 * 53 * 39MM, net weight is 78g. Note: There is a PC Sync port for YN-622N transceiver, you can use RF-602 PC / PC Cable to connect it with flash. Specifications:  System type - Digital FSK 2.4GHz wireless transceiver Operating range  - 100M Channels - 7 Groups - 3Groups (A/B/C) Flash mode - i-T TL; Manual mode; RPT flash mode Sync mode - Front-curtain Sync, Rear-curtain Sync, High Speed Sync(Auto FP) Highest sync speed  - 1/8000s Support function  - FEC; FVL; i-TTL; Manual / RPT flash mode; flash zooming; AF assist beam emitter; PC port; triggering strobe flashes; Front curtain, Rear curtain/HSS; LCD Live view triggering; single-contact of camera; flash triggering Input - Hot-shoe (TTL, main contact) Output - Hoe shoe; PC port Applicable battery - AA*2 (support 1.2 rechargeable battery) Stand-by time - 60h Dimensions  - 89.5*53*39mm Weight - 78g  Note: There is a PC Sync port for YN-622C transceiver, you can use RF-602 PC / PC Cable to connect it Suitable for: Camera: A: The EOS DSLR camera with external flash control menu: Canon 7D, 7D Mark II, 6D, 6D Mark II, 5D Mark II, 5D Mark III, 5D Mark IV, 1Ds Mark III, 1D Mark IV, 1D Mark III, 7D 60D 50D 40D 450D 500D 550D 600D 650D 700D 1000D 1100D 1200D 1300D B: The EOS DSLR Camera without external flash control manual: Canon 5D 10D 20D 30D 300D 350D 1D 1D Mark II Flash: Compatible ETTL Flash: (It support wireless remote control through camera menu) Canon 600EX (RT), 580EX II, 430EX II, 320EX, 270EX II Yongnuo YN-565EX C, YN-468 II C, YN-467 II C, YN-465 C Note: 430EX and 580EX or other parts of flash is not supported remote control via the camera menu, you need to manually set the flash parameters. Package including: 1x RF-622 C transceiver 1x Flash Stand 1x Instruction in Chinese and English WE ONLY POST TO ADDRESSES IN SOUTH AFRICA - NO INTERNATIONAL SALES  

Haoge Lens Mount Adapter for Contax/Yashica C/Y CY mount Lens to Canon EOS Rebel 80D 70D 60D 50D 550 Product Description Manual Lens Adapter for Contax / Yashica (C/Y) mount Lens to Canon EOS Cameras There are no electrical contacts in the adapter ring. Exposure and focus has to be adjusted manually. Compatible with Lens: Contax / Yashica (C/Y) mount Lens Compatible with Cameras: Canon EOS 1D/1Ds, Mark II, III, IV, X, C, 5D, 5D Mark II/III/IV, 7D, 10D, 20D, 30D, 40D, 50D, 60D, 60Da, Rebel xt, xti, xs, xsi, T1i, T2i, T3, T3i, T4, 300D, 350D, 400D, 450D, 500D, 550D, 1000D￯﾿ﾽ￯﾿ﾽManual Lens Adapter for CONTAX / Yashica (C/Y) mount Lens to Canon EOS Cameras One of the most appealing aspects of Canon EOS cameras is the availability of a wide range of interchangeable lenses, including non-Canon lenses. This Haoge Adapter allows you to mount CONTAX / Yashica (C/Y) mount Lens to Canon EOS cameras. Features: Brand: Haoge Brand new and high quality. Made of metal. Support AV or M mode. Focus by LCD, Manual Focus. Installed or removed easily. Color: Silver Compatible with: Lens: CONTAX / Yashica (C/Y) mount Lens Camera: ALL Canon EOS Cameras NOTICE: Autofocus, automatic aperture and AE metering will be DISABLED. Need to focus manually and set exposures manually. Shoot with manual mode or aperture priority mode. Package included: 1 x Lens Adapter for CONTAX / Yashica (C/Y) mount Lens to Canon EOS Cameras Our Guarantee to You We guarantee the utmost in Quality, Authenticity and Customer Satisfaction All our Items are Brand New and 100% Authentic with Original Box and Papers Price Beat or Match, if we can't (which is hardly ever), we will give you R150 off your next order with us. At these prices stocks are very limited, so order now to avoid disappointment Please view our other listings HERE Looking for something that we have not listed. Let us know - Will will get the best price for you

JJC (2-Pack) Body Cap Cover and Rear Lens Cap Cover Kit for Canon EOS Rebel T6 T5 T4i T5i T6i T6s T7 Product Description Body cap protects the camera's sensor from dust and damage when a lens is not mounted Rear lens cap protects the rear glass element and electronic contacts from scratches, dust, water, and fingerprints Body cap replaces Canon RF-3 body cap, it fits Canon EOS DSLR Camera such as Canon EOS Digital Rebel/XT/XTi/XSi/T1i/T2i/T3/T3i/T4i/T5/T5i/T6i/T6s/T7i/SL1/SL2/XS and EOS 10D/20D/30D/40D/50D/60/70D/77D/80D/5D/5D Mark II/5D Mark III/5D Mark IV/5DS/5DS R/6D/6D Mark II/7D/7D Mark II/1D/1D Mark II/1D Mark II N/1D Mark III/1D Mark IV/1Ds/1Ds Mark II/1Ds Mark III/1D X/1DX Mark II/1D C Rear Lens Cap replaces Canon rear lens cap, it fits Canon EF or EF-S mount D-SLR lenses Made of high quality ABS plastic Our Guarantee to You We guarantee the utmost in Quality, Authenticity and Customer Satisfaction All our Items are Brand New and 100% Authentic with Original Box and Papers Price Beat or Match, if we can't (which is hardly ever), we will give you R150 off your next order with us. At these prices stocks are very limited, so order now to avoid disappointment Please view our other listings HERE Looking for something that we have not listed. Let us know - Will will get the best price for you

Neewer Lens Mount Adapter for Nikon F Lens to Canon EOS EF, EF-S Mount Camera such as EOS 7D, 5D, 60 Product Description Allows Nikon F Lens to fit on Canon EOS EF, EF-S Mount Camera Body. Infinity Focus Allowed. Manual focus and manual exposure. Smooth surface for effortless mount. Durable anodized aluminum construction. Compatible Cameras (including, but not limited to): 1d/1ds, Mark II, III, IV, X, C, 5D, 5D Mark II/III 7D, 10D, 20D, 30D, 40D, 50D, 60D, 60Da, Rebel xt, xti, xs, xsi, t1i, T2i, T3, T3i, T4, 300D, 350D, 400D, 450D, 500D, 550D, 1000D. Note: Lens adapter ONLY. Camera and lens in the picture NOT included.Note: Lens adapter ONLY. Camera and lens in the picture NOT included.Description:This lens adapter allows all Nikon F Lens to fit on Canon EOS EF, EF-S Mount Camera Body. The aluminum alloy material makes it light weight and durable. It will not add too much weight to your camera, which is convenient for shooting as your wish. The smooth surface of it guarantees smooth mounting and offers you comfortable experience. It is high quality with ideal price and helps you to save the cost of purchase on new lenses. Compatible Cameras (including, but not limited to): 1d/1ds, Mark II, III, IV, X, C, 5D, 5D Mark II/III 7D, 10D, 20D, 30D, 40D, 50D, 60D, 60Da, Rebel xt, xti, xs, xsi, t1i, T2i, T3, T3i, T4, 300D, 350D, 400D, 450D, 500D, 550D, 1000DAlthough the lens will fit physically, automatic diaphragm, auto-focusing, or any other functions will not operate correctly while using this adapter. In this case "stop-down mode" will need to be used when metering since the lens does not have the ability to have its aperture controlled by the camera body. You can shoot with manual mode or aperture priority mode. Infinity focusing is allowed.Specifications:Weight: 1.0ozMaterial: Aluminum AlloyPackage Contents:1* Lens Adapter Our Guarantee to You We guarantee the utmost in Quality, Authenticity and Customer Satisfaction All our Items are Brand New and 100% Authentic with Original Box and Papers Price Beat or Match, if we can't (which is hardly ever), we will give you R150 off your next order with us. At these prices stocks are very limited, so order now to avoid disappointment Please view our other listings HERE Looking for something that we have not listed. Let us know - Will will get the best price for you

The Tempered Glass screen protectors Fit for DSRL Camera Sony a7iii a7riii A7R3 A9 A7II A7RII A7SII A77II A99II RX100 rx100 vi(m6) RX100V RX1 RX1R RX10 RX10II,easy to install. Micro Solution's brand new AF (Anti-Fingerprint) protective film is the best film to repel fingerprints. This is not a matte (anti-glare) film, to keep the beautiful images on the high resolution LCD. Our film is not thick, but it is enough to guard against most casual scratches. Our film has anti-static treatment, which repels dirt and dust in addition to fingerprints. Our film is not glue-based, so even when you remove it, you will find no residue on the LCD surface. Features: 99% UV Protection: Reduces eye strain caused by the LCD screen; Anti-Scratch Film: Thickest and most durable; 99% Transparent: Unmatched clarity; Washable and Reusable: Never need to buy another screen protector again; Silicone Adhesive Coating: No glue residue when removed; Ultra-Smooth Surface: Enhance the experience and utilization of touch screen and stylus features. Prefect fit for Sony Alpha A9 a7II a7R II a7S II Mark II 2 a7R Mark III 3 a7iii Cyber-Shot DSC-RX100 RX100 VI II III IV V Mark 1/2/3/4/5 DSC-RX10 RX10 Mark III 3 IV 4

Haoge Lens Mount Adapter for Voigtlander Retina DKL mount Lens to Canon EOS EF EF-S Mount Camera Product Description Manual Lens Adapter for Voigtlander Retina DKL mount Lens to Canon EOS Cameras There are no electrical contacts in the adapter ring. Exposure and focus has to be adjusted manually. Compatible with Lens: Voigtlander Retina DKL mount Lens Compatible with Cameras: Canon EOS 1D/1Ds, Mark II, III, IV, X, C, 5D, 5D Mark II/III/IV, 7D, 10D, 20D, 30D, 40D, 50D, 60D, 60Da, Rebel xt, xti, xs, xsi, T1i, T2i, T3, T3i, T4, 300D, 350D, 400D, 450D, 500D, 550D, 1000D￯﾿ﾽ￯﾿ﾽManual Lens Adapter for Voigtlander Retina DKL mount Lens to Canon EOS Cameras Features: Brand: Haoge Brand new and high quality. Made of metal. Support AV or M mode. Focus by LCD, Manual Focus. Installed or removed easily. This adapter has an Aperture Control Ring to control the lens aperture. Compatible with: Lens: Voigtlander Retina DKL mount Lens Camera: ALL Canon EOS Cameras Installation instructions: 1. First, mount the adapter to your camera. 2. Clockwise rotation the control of the aperture, and let the pin on the right end. 3. Mount your lens to the adapter. NOTICE: Autofocus, automatic aperture and AE metering will be DISABLED. Need to focus manually and set exposures manually. Shoot with manual mode or aperture priority mode. Package included: 1 x Lens Adapter for Voigtlander Retina DKL mount Lens to Canon EOS Cameras Our Guarantee to You We guarantee the utmost in Quality, Authenticity and Customer Satisfaction All our Items are Brand New and 100% Authentic with Original Box and Papers Price Beat or Match, if we can't (which is hardly ever), we will give you R150 off your next order with us. At these prices stocks are very limited, so order now to avoid disappointment Please view our other listings HERE Looking for something that we have not listed. Let us know - Will will get the best price for you

This item is sold brand new. It is ordered on demand from our supplier and is usually dispatched in 10 to 15 working days. We urge you to please read shipping details before placing your order. --------------------------------------- Features 1. 100% high quality and brand new 2. High speed data transmission and charging compatible with any USB version 3. A convenient charging and syncing combo delivered through a cable 4. Resist high pressure with excellent design 5. Complete charge and sync compatibility with Samsung Galaxy S6 / S5 / S IV LG HTC Huawei Xiaomi --------------------------------------- See what else we're selling

Description s: YN-560 III is almost identical in specifications to the YN560-II except for one (possibly game-changing) addition: integrated 2.4GHz flash triggering. Any user of either Yongnuo RF-602 or RF-603 wireless triggers will be able to sync their camera with the YN560-III out of the box — a surprising capability, considering that the two systems are not themselves inter-compatible with each other. Using the flash’s LCD control panel one can select which of the 16 available channels is preferred. Then you can trigger the device from as far as 100 metres away Yongnuo YN560 III is a 2.4 GHz ultra long range wireless flash: Use RF-602/RF-603 wireless flash system which is trusted by the users around the world. Support 2.4G ultra-long-range wireless flash with the furthest triggering distance is up to 100 meters Fully support RF-603, RF-602 wireless transmitter: The YN560-III can receive the signals sent by RF-603 I/II or RF-602 wireless transmitter, supporting 16 channels. It is easy to achieve wireless lighting Large size LCD display: The YN560 III is equipped with a large size LCD panel. It is intuitive and convenient to use Equipped with electronic zoom function: Lamp cover focal length can be altered between 24~105mm by pressing ZOOM button GN58 @ ISO100,105mm: powerful flash with high guide number Multiple triggering mode supported: YN560 III can be triggered by the camera set-top, 2.4G wireless trigger, S1 and S2 light sensitive trigger, S2 with pre-flash-canceled mode. Equipped with external power socket: YN-560 III provides charging socket for external power pack, meeting your higher demand for charging recycle PC port supported: YN560-III is equipped with PC port. Simply connect it to your camera and make them synchronized Sound prompt system: When the sound prompt system is enabled, different sound alerts will prompt different working conditions of the speedlite allowing you to focus on shooting process (Note: the sounds can be turned off). High speed of charging recycle: The recycling time for full output just takes 3 seconds; you can get high speed current return experience even without using brand new batteries, which will only takes 4~5 seconds; besides, you can use the external charging box to accelerate the charging speed. Advanced Options settings: YN560 III is equipped with advanced options setting function, where you can self-define the functions of the speedlite based on your own requirements. Automatic settings saving: YN560 III can automatically save your current operating settings to convenient your next use Metal hot-shoe stand, solid and reliable Compatible with: For Canon: EOS5D,5D2 5D Mark II, 1Ds Mark [IV / III / II / I], 1D Mark [III / II N/ II / I], 7D, 60D,50D, 40D, 30D, 600D, 550D, 500D, 450D, 400D, 350D,300D,1100D,1000D 650D 5D2 5D Mark III 6D,70D 700D For Nikon: D3s, D3x, D3, D700, D300s, D300,D200,D100, D90, D80, D70s, D7000,D5100, D5000, D3100,D3000, D60, D40X D800 D600 D610 D7200 D5200 D5300 D3200 For Pentax: K-7, K-x, K-m, K20D, K10D, K200D, K100D....etc For Olympus: E5, E3, E30, E300, E620, E520, E420, E450, E-P2, E-PL2, E-PL1...etc Yongnuo RF-605, RF-603 I/II, RF-602, YN622C, YN622C II, YN622N, YN622N II, YN560-TX Yongnuo YN-560 III, YN660 Yongnuo Flash Battery Pack SF-17 C / SF-18 C Specification s: Circuit design: Insulated Gate Bipolar Transistor(IGBT) Guide No.: 58 (ISO 100, 105mm) Flash mode: M, Multi Triggering mode: Camera set-up, S1, S2, RX Zoom range: 24,28,35,50,70,80,105mm Vertical rotation angle: -7 - 90 degrees Horizontal rotation angle: 0 - 270 degrees Power supply: 4 x AA size batteries(Alkaline or Ni-MH are usable) (Batteries Not include) Lighting times: 100 - 1500 times (AA alkaline cell used) Recycle time: approx 3s(AA alkaline cell used) Color temperature: 5600k Flash time: 1/200s - 1/20000s Flash control: 8 levels of output control (1/128 - 1/1), 29 levels of fine tuning External interface: hot shoe, PC port and eternal charging port Wireless triggering distance: 100m(2.4G wireless); 20-25m indoor, 10-15m outdoor (Optical control) Additional features: The electronic flash head zooming, sound prompt, automatically saving setting, power saving mode, overhearting protection and advanced options Weight: 350g Note: Batteries is not included. YN560lll only with built in trigger but no actual trigger come with the parcel (RF-602 and RF-603 are not include, YN-560III only act as a receiver only). Package Include d: 1 x Yongnuo YN-560 III Manual Flash 1 x Protector Bag 1 x Mini stand 1 x Manual