Ac pv

SELECTED OPTION: TYPE: B CLICK HERE for more options in this item. Description: Grid tie inverter is a device which directly converts direct current into alternating current which  sine wave, frequency and phase are same as power grid and then feed into utility grid. It is a key  device of power generation systems such as PV power generation system. Smart Microinverter specially optimized design to work with modularization of DC power supplies which includes the mainstream solar modules, 18V (36 cells), 24V (60 cells) and 36V (72 cells) monocrystal and/or Polycrystalline solar panels. Smart Microinverters are stabilization, reliable and high conversion efficiency items. It is best choice for PV power generation systems. Smart Microinverter can be easily placed and attached to the rack underneath of PV module. No  need spaces for independent installation and low voltage DC wire connects from the PV module to Smart Microinverter can eliminate the risk of high DC voltage. Distributed modularization design philosophy for Smart Microinverter insures the productiveness of the whole system and will not affect by a single point of failure. Each Smart Microinverter is individually connected to one PV module in the array. Each PV module has the individual Maximum Peak Power Point Tracker (MPPT) control and insures the maximum power is exported to the utility grid regardless of the performance of the other PV modules in the array. When PV modules in the array under non-ideal conditions in practical applications such as PV modules are affected by shading, soiling,  orientation, or mismatch, Smart Microinverter insures top performance for maximizes energy  production from the whole PV system and gets return on investment in less time. Specifications: Type A: 10.8-30V Version: Rated Power:1000W Solar Panels:36 cells/18V DC Input Range:10.8-30V MPPT Voltage:15-22VDC AC Output:115V(90-140V)  Frequency:50Hz-60Hz THD: Power Factor:>98% Stand-by Power: 1W Certification:CE RoHS Type B: 20-45V Version: Rated Power:1000W Solar Panels:60/72 cells; 30V/36V DC Input Range:20V-45V MPPT Voltage:24-38VDC AC Output:230V(190-260V) Frequency:50Hz-60Hz THD: Power Factor:>98% Stand-by Power: 1W Certification:CE RoHS Package Size:approx.28x16.5x5.5cm Feature: Creative MPPT technology, efficiency more than 95% Parallel type design for DC input and modularization design Small volume, distributed installation, easy for system configuration Adopting high-frequency isolation transformer type, high efficiency Perfect electrical protection function Stackable and Easy to install (Please be noted, This grid tie inverter cannot be used as off grid/stand alone solar system. The output need to be connected to the grid power. Can not supply power directly to the AC loads.) Package Included: 1 x 1000W Grid Tie Inverter 1 x User's Manual 1 x AC Cord Picture details:

PLEASE CONFIRM STOCK AVAILABILITY BEFORE PLACING ORDER (PLS USE Q&A TO ASK)  InfiniSolar is a hybrid inverter which combines solar system, AC utility, and battery power source to supply continuous power. It is suitable for the remote areas where the cost of utility is too high or emergency usage when utility is not stable. 3KW On-Grid Inverter with Energy Storage Self-consumption and Feed-in to the grid Programmable supply priority for PV, Battery or Grid User-adjustable battery charging current suits different types of batteries Programmable multiple operations modes: Grid tie, Off grid, and grid-tie with backup Built-in timer for various mode of on/off operation Multiple communication for USB, RS-232, Modbus and SNMP Monitoring software for real time status display and control Specifications: PHASE: 1-phase in / 1-phase out RATED OUTPUT POWER: 3000 W MAXIMUM CHARGING POWER: 1200 W Maximum DC Power: 3200 W Nominal DC Voltage / Maximum DC Voltage: 360 VDC / 500 VDC Start-up Voltage / Initial Feeding Voltage: 360 VDC / 500 VDC MPP Voltage Range: 360 VDC / 500 VDC Number of MPP Trackers / Maximum Input Current: 360 VDC / 500 VDC GRID OUTPUT (AC) Nominal Output Voltage: 208/220/230/240 VAC Output Voltage Range: 184 - 264.5 VAC Nominal Output Current: 13.1 A Power Factor: > 0.99 EFFICIENCY Maximum Conversion Efficiency: (DC/AC) > 96% European Efficiency@ Vnominal: > 95% OFF-GRID OPERATION AC INPUT AC Start-up Voltage/Auto Restart Voltage: 120 - 140 VAC / 180 VAC Acceptable Input Voltage Range: 170 - 280 VAC Number of MPP Trackers / Maximum Input Current: 25A PV INPUT (DC) Maximum DC Voltage: 500 VDC MPP Voltage Range: 250 VDC ~ 450 VDC Maximum Input Current: 1 / 1 x 13 A BATTERY MODE OUTPUT (AC) Nominal Output Voltage: 208/220/230/240 VAC Output Waveform: Pure Sinewave Efficiency (DC to AC): 93% HYBRID OPERATION PV INPUT (DC) Nominal DC Voltage / Maximum DC Voltage: 360 VDC / 500 VDC Start-up Voltage / Initial Feeding Voltage: 116 VDC / 150 VDC MPP Voltage Range: 250 VDC ~ 450 VDC Maximum Input Current: 1 / 1 x 13 A GRID OUTPUT (AC) Nominal Output Voltage: 208/220/230/240 VAC Output Voltage Range: 184 - 264.5 VAC Nominal Output Current: 13.1 A* AC INPUT AC Start-up Voltage/Auto Restart Voltage: 120 - 140 VAC / 180 VAC Acceptable Input Voltage Range: 170 - 280 VAC per phase Maximum AC Input Current: 25A BATTERY MODE OUTPUT (AC) Nominal Output Voltage: 208/220/230/240 VAC Efficiency (DC to AC): 93% BATTERY & CHARGER Nominal DC Voltage: 48 VDC Maximum Charging Current: 25A GENERAL PHYSICAL Dimension, D x W x H (mm): 480 x 438 x 107 Net Weight (kgs): 15.5 INTERFACE Communication Port: RS-232/USB Intelligent Slot: Optional SNMP, Modbus, and AS-400 cards available ENVIRONMENT Humidity: 0 ~ 90% RH (No condensing) Operating Temperature: 0 to 40Â °C Altitude: 0 ~ 1000 m

Features: Dimensions: 48mm×48mm×110mm(APP) Measuring accuracy: ±0.5%FS Cold-end compensation tolerance: ±2¿¿¿ (can be modified by software in 0~50¿¿¿) Resolution: 14 bit Sampling cycle: 0.5 Sec Process value (PV), Setting value (SV) Output, alarm and self-tuning can be indicated by: LED PIN control (including ON/OFF, step-type PID and continuous PID) Self-tuning control Relay output: contact capacity 250V AC 3A (resistive load) Voltage pulse output: 0/12V (suitable for solid state relay SSR) Alarm function output: 2 way Contact capacity of output: 250V AC 3A (resistive load) Setting value (SV): identical to measuring range (PV) Proportional band (P): 0~full range (ON/OFF control when set to 0) Detective temperature range: 0 to 400¿¿¿ Insulation resistance: >50M ohm(500V DC) Insulation resistance: 1500V AC/min Power Consumption: 10 VA Service environment: 0~50¿¿¿, environment with no corrosive gas 30~85% RH Please assure that you are familiar with this product before you buy, because the manual we offer is Chinese. Package Includes: 1 x PID Digital Temperature Control Controller Details Pictures:  

The Axpert MKS plus is similar to Axpert MKS series but  comes with a bigger MPPT solar charge controller. INPUT Rated Power: 3000VA/2400W Voltage: 230 VAC Selectable Voltage Range: 170-280 VAC (For Personal Computers) to 90-280 VAC (For Home Appliances) Frequency Range: 50 Hz/60 Hz (Auto sensing) OUTPUT AC Voltage Regulation (Batt. Mode): 230VAC ± 5% Surge Power: 6000VA Efficiency (Peak): 93% Transf er Time: 10 ms (For Personal Computers) & ) 20 ms (For Home Appliances) Waveform: Pure sine wave BATTERY Battery Voltage: 24 VDC Floating Charge Voltage: 27 VDC Overcharge Protection: 31 VDC SOLAR CHARGER & AC CHARGER Maximum PV Array Power: 1500 W MPPT Range @ Operating Voltage: 30 VDC ~ 115 VDC Maximum PV Array Open Circuit Voltage: 145 VDC Maximum Solar Charge Current: 60A  Maximum AC Charge Current: 30A Maximum Efficiency: 98% Standby Power Consumption: 2W PHYSICAL Dimension, D X W X H (mm): 140 x 295 x 479 Net Weight (kgs): 11.5

Description:  REX-C100 110-240V 0-1300 Degree Digital PID Temperature Controller Kit Features: REX-C100 Temperature Controller Measuring accuracy: ±0.5%FS Cold-end compensation tolerance: ±2??can be modified by software in 0~50??br />Resolution: 14 bit Sampling cycle: 0.5 Sec Power: AC 110-240V 50/60HZ Process value (PV), Setting value (SV) Output, alarm and self-tuning can be indicated by: LED PIN control (including ON/OFF, step-type PID and continuous PID) Self-tuning control Relay output: contact capacity 250V AC 3A (resistive load) Alarm function output: 2 way Proportional band (P): 0~full range (ON/OFF control when set to 0) Detective temperature range: 0 to 1300??/span> Insulation resistance: >50M ohm(500V DC) Insulation resistance: 1500V AC/min Insulation resistance: Power Consumption Service environment: 0~50??br />Environment with no corrosive gas 30~85% RH K Thermocouple Probe Cable Length: 1M Sensor diameter: 4.5mm Temperature rang: 0 to 1300??/strong> Internal Insulation: Fiberglass External Shielding: Insulated Shielding Max.40A SSR Output Voltage Range: Standard Type Output Current: 40A Input Voltage: DC 3-32V Output Voltage: 24-380V AC Package included: 1 x REX-C100 PID Temperature Controller 1 x K Type Probe Sensor 1 x Max.40A SSR More products: Now we have created a SKU108327 that is 220V, 0 ~ 400??. and  SKU188430 taht is 110-240V, 0 ~ 400??/span>. Details pictures:

Description:   100-240V 40A Digital PID Temperature Controller SSR K Thermocouple Sensor   Features:   1. Measuring accuracy: ±0.5%FS 2. Cold-end compensation tolerance: ±2¿¿¿ (can be modified by software in 0~50¿¿¿) 3. Resolution: 14 bit 4. Sampling cycle: 0.5 Sec 5. Power: AC 100-240V 50/60HZ 6. Process value (PV), Setting value (SV) 7. Output, and self-tuning can be indicated by:LED 8. PIN control (including ON/OFF, step-type PID and continuous PID) 9. Self-tuning control 10. Relay output: contact capacity 250V AC 3A (resistive load) 11. Proportional band (P): 0~full range (ON/OFF control when set to 0) 12. Detective temperature range: 0 to 999¿¿¿ 13. Insulation resistance: >50M ohm(500V DC) 14. Insulation resistance: 1500V AC/min 15. Insulation resistance: Power Consumption 16. Service environment: 0~50¿¿¿ 17.environment with no corrosive gas 30~85% RH Max.40A SSR: 1. Output Current: 40A 2. Input Voltage: DC 3-32V 3. Output Voltage: 24-380V AC 4. Output Voltage Range: Standard Type    

Hybrid Controller Inverter SKS Series 2000 SKSMPPT2000 SKS(SPS) Series pure sine wave grid hybrid inverter equipped with MPPT solar charge controller to maximize and regulate DC power from the solar array for the charging the battery bank.It totally workable on inductive load such as Refrigerator,Air conditioner,Water pump,ect. Its an intelligent inverter for small PV plants, or individually for small houses, solar pump system. Professional solution for off-grid solar system 5 functions automatically switch:DC-AC, AC bypass, AC charger, solar charger and UPS Built-in MPPT solar charger Pure sine wave output Low power energy saving mode Solar power mode and grid power mode auto switch Built-in transfer switch and AC/DC circuit breaker Advanced microprocessor control design Input reversed polarity protection/UVP/OVP/OSP/OLP/OTP AC-Output Power: 2000W AC-Frequency: 50/60HZ auto detect AC-Surge Power: 6000w DC-Input Voltage: 12v/24v DC-Voltage Range: 10-16DC/20-32VDC/40-64VDC ACC-Input Voltage 95-127VAC/194-253VAC ACC-Charge Current 0-65A MPPT Controller- Max Charging Currency 50a Weight 24 kg Size (L-W-H) 486 x 400 x 181 mm all images are for illustrative purposes only. all products are sold subject to stock availability. in stock products allow 7 to 10 working days for shipping. non stock product which must be manufactured allow 15 to 21 days for shipping.    

PLEASE CONFIRM STOCK AVAILABILITY BEFORE PLACING ORDER (PLS USE Q&A TO ASK)  RCT 3000VA/ 2400W Inverter - Pure sine wave inverter -  Built-in MPPT solar charge controller -Selectable input voltage range for home appliances and personal computers -  Selectable charging current based on applications -  Configurable AC/Solar input priority via LCD setting -  Compatible to mains voltage or generator power -  Auto restart while AC is recovering -  Overload and short circuit protection -  Smart battery charger design for optimized battery  performance -  Cold start function Specifications:   Rated Power:  3000VA/2400W Voltage:  230 VAC Surge Power:  6000VA Efficiency:  93% Transfer Time:  10 ms (For Personal Computers),  20 ms (For Home Appliances) Waveform:  Pure sine wave Battery Voltage:  24 VDC Overcharge Protection:  31 VDC Maximum Charge Current:  20 A or 30 A Maximum PV Array Power:  600 W Maximum Charging Current: 25A Standby Power Consumption: 2W Dimension, D x W x H:  128 x 272 x 355 mm Net Weight:  7.5 Kg BATTERIES NOT INLUDED

Advantages of Solar Home UPS • 25%-30% Savings on electricity bill • Clean, green and free energy • Intelligent charger. Maximum utilization of solar energy even when mains is available • Pure and highly regulated Sine wave output for better performance & safety to the connected loads • i-CHARGE option for fast battery charging • Economical & reliable. Easy to install • Equipped with all required electrical protections to keep connected appliances safe • User selectable options for battery types & charging current • Flexibility of use with all types of batteries The Sine Wave Inverter - is an efficient appliance that delivers reliable performance during power-cuts. It protects sensitive equipment from damage caused due to rapid changes in input power supply. This inverter boasts of pure sine wave output. The implementation of adaptive battery charging control (ABCC) technology prevents overcharging of the battery. One of the unique features of this inverter is that it can endure high load cold start. This inverter features the smart charge technology for fast charging and providing an extended battery life span. An intelligent thermal management system provides protection to the internal components from heating. For users' convenience, this sine wave inverter comes with a pre-loaded battery management software. The no load shut-down and intelligent battery low cut-off functions minimise manual interference during the operation of this unit. Solar panels can be connected directly to ‘Hybrid Solar UPS’, as it has inbuilt solar charge controller. Solar Home UPS Features south africa first inverter which can run both AC & DC loads Preferential charging from solar to reduce commercial mains usage, saves money Solar charger efficiency =98% and Inverter efficiency =85%* Suitable for PV panels up to 800Wp 24v This is currently available 1400 VA options.