INNOGEAR LARGE STURDIER MICROPHONE SUSPENSION MIC CLIP IN SOUTH AFRICA

Upgraded spring-embedded balance system: Compared with other versions, it looks more upscale and professional (Other stand spring are exposed the outside). Better spring internal balance system: the support weight of the stand has been significantly improved, and the actual measurement can reach 2kg (the old version can reach about 1kg). Better compatibility: Even if the heavy object is not suspended, the stand can still be balanced at any position within the adjustable range and will not bounce up. Therefore, it is applicable not only to heavy-duty microphones but also to some light-duty microphones. Larger size: length of single scissor arm stand is 48cm/19.0inch (others:35cm/13.8inch), the vertical and horizontal distances are much longer to meet the needs of the studio and other professional users. Better materials: the diameter of the square tube is 0.53inch, and the regular section is a 0.39inch square tube. Description InnoGear microphone scissor arm stand is suitable for any stores, families, stages, studios, broadcasting and TV stations, etc. It is made of high quality iron frame. Max load: 2KG. Movement is solid and smooth without any metal noise. Specification Single stand length: 19inch (48.3cm) Square pipe diameter: 0.53inch (1.34cm) Maximum clamping thickness of the base: 1.97inch (5cm) Maximum vertical height: 33.5inch (85.0cm) Maximum horizontal height: 38.0inch (96.5cm) Maximum weight: Max 2kg (4.4lb) Specification of connecting rod connector: 5/8" Material: Iron Package Included 1x InnoGear Spring Built-in Microphone Stand 1x InnoGear Desk Mounting Clamp 5 x Velcro Ties 1 x User Manual Note 1The base can only be clamped on the flat edge of the table, otherwise it cannot be fixed, it will damage the stand and microphone. 2Test that you have mounted the clam securely by seeing if you can pull it off the edge of the table. 3When you need to rotate the stand, first loosen the fixing screws on the side of the base, rotate the stand to the desired direction, and then tighten it again to avoid scratching the pins on the stand.