TORK CRAFT POLISHING BONNET WOOL VELCRO CONCAVE 180MM 7" IN SOUTH AFRICA

Velcro polishing wool buff Diameter: Ø180mm Use backing pad: SPC00119 Application: The polishing wool buff should be used with an automotive polisher. Different polishes and waxes can be used with the buff. The buff is fastened onto a rubber backing pad with velcro. Make sure the diameter of the polishing buff is the same as the backing pad"s diameter. It is necessary to polish a vehicle body panel when: The panel has been newly painted with a clear-coat. Shallow scratch marks need to be removed. The panel has suffered from oxidation. Swirl marks and hologram defects need to be removed. TIP: The buff is washable after use if the polishing compound is soluble. Velcro polishing wool buff range: ORDER NO. DIAMETER USE BACKING PAD SPC00123 Ø125mm SPC00120 SPC00125 Ø180mm SPC00119 Recommended polishing compounds to use: Liquid Shine¿ High cut - Features a silicone, wax and filler free polishing compound to give a high gloss finish on fresh or cured paint. It is capable of removing P1500 grit sanding marks. It can be used on automotive paints, marine gel-coats and on composite surfaces. Liquid Shine¿ Fine cut - similar to the High cut polishing compound, but it is designed for use on a ceramic and scratch resistant clear-coat. It is capable of removing P2000 scratch marks. Liquid Shine¿ Zero swirl - Very low abrasive for the final step of polishing. Removes holograms and swirl marks. Use a soft compounding sponge as a final step