Wireless studio trigger

Wireless Studio Trigger ACThese radio triggers are for indoor studio shooting with AC power. They are used with studio strobes, with mini/mono jack inputs. No more cables on the studio floor! 1x Studio Trigger Kit TR-A9 Digital Flash Trigger 16 Channel Digital Flash Trigger Microprocessor Controlled High Anti-jamming Ability Low Power Wastage Fast Reactivity 30m Maximum Range

Wireless Studio Trigger Set - 4 Channel - AC Trigger studio flashes remotely No sync cables necessary Four Channel AC version 1xTransmitter 1x Receiver

Menik T-12 Wireless Studio Trigger kit Features: AC Trigger Transmitters: 23A 12V R Receivers Power: 2 x AAA Operation distance: 30m Frequency: 433Hz Emitter terminals: 1/200s  Channel:8

Wireless STUDIO Flash RT-16 RECEIVER 16-Channel 100% BRAND NEW! HIGH QUALITY! Works with ANY Strobe Flash! Package Contents: 1x RT-16 RECEIVER The receiver has an on/off switch, and an LED to indicate triggering. Power Input of Receiver: 2 AAA batteries (Not included) Plug size of receiver: 3.5mm Adapter size for receiver plug: 3.5mm --> 6.35mm

SINGLE RF-603 SPEEDLIGHT FLASH TRIGGER FOR CANON The RF-603 Wireless Flash Trigger act as a wireless flash trigger as well as wireless shutter release trigger. RF-603 supports all Canon DSLR Camera and support Flash Speedlight with "Sleep mode" function: Nikon Canon Olympus Pentax Samsung and other Speedlight flashes which has "Wake up" function The RF603 has been improved in several functions: Transceiver-based system: units automatically detect when to switch to either transmitter or receiver mode. Hot shoe pass-through, allowing on-camera flash and radio triggering to be used simultaneously. Improved shutter sync speed up to s Use AAA batteries (not included) Improved on/off switch Prontor/Compur (PC) port for off-hot shoe synchronisation Non-proprietary 2.5mm (sub-miniphone) port for shutter release cables Shutter release cable included (Select between C1- and C3 cable) Since it is now a transceiver system you can now use it more flexible. With e.g. 4 RF-603 you can trigger 3 flashes (1 trigger, 3 receivers) as well as trigger the camera itself and then trigger 1 flash. One more good thing is that the only power source you now need is 2 AAA batteries. The power switch has been improved an now should prevent from accidently firing in the camera bag which could consume a lot of the battery power. Features:   Wireless flash trigger: As a flash trigger, RF-603 trigger both flash Speedlight and studio flashes the flash sync speed is up to s Transmission distance: 100m Wireless shutter release (CABLES NOT INCLUDED - AVAILABLE FOR R50 EXTRA) (C1 shutter connecting cord included to supports Canon 60D 70D 350D 450D 500D 550D 600D 650D 700D D D D): (C3 shutter connecting cord included to supports Canon 1D 5D 6D 7D 20D 30D 40D 50D) As the wireless shutter release, its working range is up to 100 meters (clear outdoor environment) Full-way press the release button can starts continuous shooting or long exposure   Features and specifications: 2.4GHz band-16 selectable operating frequencies to eliminate chance of interference The RF-603 transceiver system can be used to trigger all studio flash units through standard PC socket Flash sync speed: s Operating distance: 100m Shutter interface: 2.5mm socket Release: half-way press, full-way press Battery: AAA x 2 Receiver stand-by time: up to 45 hours Package include: 1x RF-603 Transceiver for Canon cameras I ONLY POST TO ADDRESSES IN SOUTH AFRICA - NO INTERNATIONAL SALES

Neewer Multi-Channel 2.4GHz 3-IN-1 Wireless Flash Studio Flash Trigger for Nikon         Neewer FC-16 Multi-Channel 2.4GHz 3-IN-1 Wireless Flash/Studio Flash Trigger with Remote Shutter for Nikon D7100 D7000 D5100 D5000 D3200 D3100 D600 D90 D800E D800 D700 D300S D300 D200 D4 D3S D3X D2Xs   - Neewer Wireless Flash Trigger for Nikon - The Neewer Photo wireless flash trigger receiver and transmitter can serve you in a multitude of functions. - To use this set as a wireless remote control, plug in the included N-Cable to both the receiver and your camera's compatible input. Make sure the receiver's and the transmitter's switches are set to "CAMERA" mode and then use the transmitter to wirelessly autofocus and take pictures. - Similarly you can employ a wired remote method simply by plugging in the N-Cable to the transmitter alone and proceeding to use this without the receiver. - Finally, if you wish to use this pack for wireless flash / studio flashtriggering purposes, first attach the transmitter to your camera's hot shoe mount. Attach your flash to the hot shoe mount of the receiver and make sure the switches are set to "FLASH" mode and you can proceed to position the flash however you desire and take photos normally. - Features: - Frequency: 2.4Ghz - Operating Distance: up to 100m. - 16 Selectable Channels. - 1/4" Tripod Mount. - Sync Speed: 1/250 second. - Power Supply: 2x alkaline AAA batteries Wireless Frequency System: 2.4GHz Operating Distance: up to 100meters 16 Selectable Channels Also Compatible with: Fuji S5 Pro, S3 Pro Includes: Wireless Camera Flash Trigger and Camera Remote Control Function (1 Transmitter, 1 Receiver) + N1 camera cable + N3 camera cable + Flash Sync Cable + PC Sync Cord + Sync Adapter 1X Transmitter 1X Receiver 1X N1 camera cable 1X N3 camera cable 1X Flash Sync Cable 1X PC Sync Cord 1X Sync Adapter 1X Manual Instruction 

RF-603 SPEEDLIGHT FLASH TRIGGERS FOR CANON The RF-603 Wireless Flash Trigger act as a wireless flash trigger as well as wireless shutter release trigger. RF-603 supports all Canon DSLR Camera and support Flash Speedlight with "Sleep mode" function: Nikon Canon Olympus Pentax Samsung and other Speedlight flashes which has "Wake up" function The RF603 has been improved in several functions: Transceiver-based system: units automatically detect when to switch to either transmitter or receiver mode. Hot shoe pass-through, allowing on-camera flash and radio triggering to be used simultaneously. Improved shutter sync speed up to s Use AAA batteries (not included) Improved on/off switch Prontor/Compur (PC) port for off-hot shoe synchronisation Non-proprietary 2.5mm (sub-miniphone) port for shutter release cables Shutter release cable included (Select between C1- and C3 cable) Since it is now a transceiver system you can now use it more flexible. With e.g. 4 RF-603 you can trigger 3 flashes (1 trigger, 3 receivers) as well as trigger the camera itself and then trigger 1 flash. One more good thing is that the only power source you now need is 2 AAA batteries. The power switch has been improved an now should prevent from accidently firing in the camera bag which could consume a lot of the battery power. Features:   Wireless flash trigger: As a flash trigger, RF-603 trigger both flash Speedlight and studio flashes the flash sync speed is up to s Transmission distance: 100m Wireless shutter release (C1 shutter connecting cord included to supports Canon 60D 70D 350D 450D 500D 550D 600D 650D 700D D D D): (C3 shutter connecting cord included to supports Canon 1D 5D 6D 7D 20D 30D 40D 50D) As the wireless shutter release, its working range is up to 100 meters (clear outdoor environment) Full-way press the release button can starts continuous shooting or long exposure   Features and specifications: 2.4GHz band-16 selectable operating frequencies to eliminate chance of interference The RF-603 transceiver system can be used to trigger all studio flash units through standard PC socket Flash sync speed: s Operating distance: 100m Shutter interface: 2.5mm socket Release: half-way press, full-way press Battery: AAA x 2 Receiver stand-by time: up to 45 hours Package include: 2 x RF-603 Transceivers for Canon cameras 1x cable for shutter release function (C1 shutter connecting cord included to supports Canon 60D 70D 350D 450D 500D 550D 600D 650D 700D D D D): (C3 shutter connecting cord included to supports Canon 1D 5D 6D 7D 20D 30D 40D 50D) English Manual   PLEASE REMEMBER TO INDICATE WHICH ONE OF THE CABLES YOU REQUIRE (IF YOU WANT BOTH THE C1 AND C3 CABLES - PLEASE ADD R50 FOR THE SECOND CABLE) I ONLY POST TO ADDRESSES IN SOUTH AFRICA - NO INTERNATIONAL SALES

 1 x Yongnuo YN-622C E-TTL Wireless Flash Trigger Transceiver for Canon Yongnuo First Wireless E-TTL Flash Trigger YN-622 C is Released now, it's designed for Canon Camera. Using Digital FSK 2.4GHz frequency band with 7 channels, it has three mode, E-TTL (II), Manual and Multi, and it can fire flashes at 360 degree direction, the operating range is 100 metres. It supports FEC, FEB, FEL, High-speed Sync, 1st. Curtain, 2nd. Curtain, Modeling flash, ETTL II Group Ratio (ALL/A:B/A:B C), Manual/Multi group (ALL/ A:B/ A:B:C), Manual and Multi mode, Auto Zooming, Manual Zooming, AF Lamp. Main function: a), Support Full ETTL Pass-through function when on camera 1), Mount one YN-622C transceiver into the hot shoe of camera, and mount other transceiver into the hot shoe of flash, you can trigger the flash at any direction in TTL, Manual or Multi mode. 2), Mount flash on hot shoe of YN-622C transceiver on camera, mount the second flash on other transceiver, both of flashes can be trigger at any direction in TTL, Manual or Multi mode. Note: Speedlites on hot-shoe of transmitter support ETTL II / Manual / Multi b), Shutter Sync 1), High-speed Synchronous The max. sync speed is 1/8000s, but some camera is just 1/4000s, and for those cameras and flashes who don't suport HSS, the sync. speed is just 1/250s or less, different cameras have different Sync speed. 2), 1st. Curtain Sync 3), 2nd. Curtain Sync. c), Remote Control Function The parameter of flashes on hot shoe of receivers can be set up remotely through the camera manu directly. d), Supporting mixed mode. With this function, you can trigger remote speedlites in different modes, set up one YN-622C transceiver on hot shoe of flash in TTL mode, set up the second YN-622C transceiver on hot shoe of flash in manual mode, and the third YN-622C transceiver on hot shoe of flash in multi mode, all three flashes can be fired via the transceiver on hot shoe of camera, this mode is especially useful for those camera bodies without a built-in flash menu. (you need to set the parameters on speedlites) Note: Only FEC, FEB, Ratio and Shutter sync can be set in the camera side. Manua and Multi output need to be set on the flash speedlite. e), Work with Strobe Studio flash light in HSS function You can buy a PC Sync Cable RF-603 6.35mm cable to connect the transceiver with the studio flash, and then youcan use the non-high speed sync flash torealize hihger syand then you can use them together in HSS. The max. trigger voltage is less than 300 Voltage. Note: The PC port is for output using only. f), Awaking function When half-pressing the shutter button of the camera, the hot shoe flash on the receiver will be awakened. (for those flash has wake up function) g), Zoom Function Zoom Automatic: length will be charnged depanding on the changes of lens. Zoom Manual: Zoom length is within 24 - 105mm Zoom Lock h), Support Single-contact of camera and flash triggering (the max. Sync. speed is 1/250s) You can use it with Nikon camera or Nikon flash, but you just need to set up YN-622C in manual mode. i), Flash Fire Ratio with ETTL You can set up different flash fire ratio and FEC for those flashs on hot shoe of receiver. j), Support 2pcs AA batteries, (1.2v rechargeable battery), Stand-by time is 60hours. k), Dimension: 89.5 * 53 * 39MM, net weight is 78g. Note: There is a PC Sync port for YN-622C transceiver, you can use RF-602 PC / PC Cable to connect it with flash. Suit for: Camera: A: The EOS DSLR camera with external flash control menu: Canon 5D Mark II, 5D Mark III, 1Ds Mark III, 1D Mark IV, 1D Mark III, 7D 60D 50D 40D 450D 500D 550D 600D 650D 1000D 1100D B: The EOS DSLR Camera without external flash control menu: Canon 5D 10D 20D 30D 300D 350D 1D 1D Mark II If you use the Canon Speedlite 430EX or 580EX (not mark II) or an older camera without the Flash Control menu then you will have to make settings by hand. Older cameras that don’t have the same Flash Control menu include the original 5D, 10D, 20D, 30D, 300D, 350D, 1D and 1D Mark II. Flash: Compatible ETTL Flash: (It suport wireless remote control through camera menu) Canon 600EX (RT), 580EX II, 430EX II, 320EX, 270EX II Yongnuo YN-565EX C, YN-468 II C, YN-467 II C, YN-465 C (Our yongnuo flash units don't support HSS Function) Note: 430EX and 580EX or other parts of flash is not supported remote control via the camera menu, you need to manually set the flash parameters. Q&A How does wireless E-TTL ratio control work? Set the desired group – A, B or C – on each of your YN-622C transceivers On your Canon EOS DSLR, hit [Menu] > Flash control > External flash func. setting > Wireless func. > Enable. If you have a flash on top of your on-camera YN-622C unit, select Master flash > Enable if you want it to fire, otherwise it won’t. It will behave like an off-camera flash in group A. In the External flash func. setting > Channel menu, pick your channel (1-4). The YN-622C transceivers can actually be set to more channels than the menu supports. To pick channels 5, 6 or 7, select it directly using the buttons on the on-camera YN-622C transceiver. Pick your ratio control mode from the External flash func. setting > Firing group menu. You have the choice of All (A+B+C), A:B or A:B C. In “All”, there are no ratios and each flash fires at the same power level (this is the same as having ‘Wireless func.’ disabled). In the other modes you can select ratios from 8:1 to 1:8 for the groups in 1/2-stop increments. Check your camera user manual for more details. Wireless ratio control in the Flash control menu with the YN-622C How does wireless manual control work? The set-up is similar to E-TTL ratios, but in External flash func. setting > Flash mode you pick “Manual” instead of “E-TTL II”. You will then be able to set each of your independent flash groups – A, B or C – to manual power levels from 1/1 to 1/128. Wireless manual control in the Flash control menu with the YN-622C Package including: -1 x YN-622C transceivers. (DON'T come with retail packing,Since Yongnuo not launch 1PC retail box.We will send in sealed bubble bag.) Note: Camera & Flash & Batteries not included

1. Works as a wireless shutter release control 2. Transceiver based system - works as a wireless flash trigger and receiver 3. Wireless trigger studio flash Compatible cameras NIKON D90 D5000 D3100 D7000 Digital Camera RF-603-N3 Radio Flash Trigger for Canon NIKON D90 D5000 D3100 D7000

Buy YONGNUO CTR P Wireless Studio Flash Sync Trigger Receiver Set With PC Sync Cable... for R629.00

Yongnuo YN-622C II E-TTL wireless flash trigger for Canon Specifications: Compared to the first version, YN-622C Mark II has more functions: The quick lock design, you can fasten the hot shoe of this flash trigger with your camera or flash. It supports USB Firmware upgraded. It supports 622C communication mode (YN-622C and YN-622C-TX) and (RF-605C, RF-603 II and YN560-TX) --- TTL mode, you can use YN-622C II, YN-622C, Canon version together, and when you use it with YN-622C-TX, it can be used as receiver. --- Manual mode,you can use YN-560TX, RF-603 II, RF-605C as transmitter, and use YN-622C II as receiver. Main functions: --- Quick Lock Design --- USB Firmware Upgrade --- YN-622C Communication and YN560-TX Communication mode --- flash mode: E-TTL (II) / Manual / Multi --- 1st Curtain, 2nd curtain, High Speed Sync (HSS / FP), Max 1 / 8000s Sync Speed --- Control Remote flash using camera's falsh control menu screen (Remote Control mode) --- E-TTL / Manual / Multi Flash mode mix using (Mix Control Mode) --- Flash on hot shoe of transmitter supports ETTL --- Flash Exposure compensation (FEC) --- Flash Exposure Bracketing (FEB) --- Flash Exposure Lock (FEL) --- modeling flash --- E-TTL Group ratio (ALL / A:B / A:B:C) --- Manual / Multi Group (ALL / A:B / A:B:C) --- flash zooming (auto, manual) --- AF assist beam emitter (AF Lamp) --- PC port Triggering strobe flashes and 1st, 2nd curtain / HSS --- LCD Live View triggering --- High-speed continuous shooting trigger --- Settings saved automatically --- Compatible with ALL Yongnuo / Canon EX II series flashs --- Single-contact of camera and flash triggering (Max sync. speed is 1/250s) --- Groups: A/B/C 3groups (YN-622C), A/B/C/D/E/F 6groups (YN560-RX) --- AA *2 (Support 1.2V rechargeable batteries) (Not Included) Note: Mark II has a PC Sync port for YN-622C transceiver, you can use RF-602 PC / PC Cable to connect it with flash, and use RF-603 II 6.35mm cable to work with Strobe flash. Suitable for: Camera: A: The Canon EOS DSLR camera with external flash control menu: Canon Canon 7D, 7D Mark II, 6D, 6D Mark II, 5D Mark II, 5D Mark III, 5D Mark IV, 1Ds Mark III, 1D Mark IV, 1D Mark III, 7D 60D 50D 40D 450D 500D 550D 600D 650D 700D 1000D 1100D 1200D 1300D B: The Canon EOS DSLR Camera without external flash control manual: Canon EOS 5D 10D 20D 30D 300D 350D 400D 1D 1D Mark II Flash: Compatible ETTL Flash: (It supports wireless remote control through camera menu) Canon 600EX (RT), 580EX II, 430EX II, 320EX, 270EX II Yongnuo YN600EX-RT, YN-568EX II, YN-565EX II C, YN-468 II C, YN-467 II C. Note: 430EX, 550EX and 580EX or other parts of flash is not supported remote control via the camera menu, you need to manually set the flash parameters. It also compatible with Yongnuo RF-605C, RF-603 II, YN560-TX in manual mode. Package including: 2 x RF-622C II transceivers 1 x Instruction Manual in English 1 x Original Yongnuo Box I ONLY POST TO ADDRESSES IN SOUTH AFRICA - NO INTERNATIONAL SALES

Yongnuo YN-622N II Wireless Flash Trigger Receiver TTL for Nikon D4 D7000 The new upgrade version YN622N II supports receiving the trigger signal of the YN560-TX/ RF605 (603MODE)/ RF603II Series products, with multi aspects improved, equipped with quick lock design and supports USB firmware upgrade. Specification We added the quick lock design, you can fasten the hot shoe of this flash trigger with your camera or flash. It supports USB Firmware upgraded. It supports YN-622N, YN-622N-TX, RF-605N, RF-603 II and YN560-TX communication mode. **TTL mode (622 mode), you can use YN-622N, YN-622N II, YN-622N-TX together, ***Manual mode (603-RX mode), you can use YN-560TX, RF-603 II, RF-605N as transmitter, and use YN-622N II as receiver. Main Function *Quick lock design *Supports USB firmware upgrade *Supports "622" communication mode,"603-RX" communication mode *Compatible flash mode: i-TTL, Manual flash *Compatible Shutter sync: front-curtain sync, rear- curtain sync and high-speed sync(HSS/FP), the highest sync speed is 1/8000s* *Support remote set the parameters of flash through the transceiver (Remote Control Mode) *Support i-TTL/Manual/Repeating flash mode mix using(Mix Control Mode) *Support the flash installed on transmitter(on-top flash)and supports i-TTL function *Support the use of master unit on transmitter sets the parameters of each group(Master Control Mode) *Support FEC, FVL function *Support modeling flash and red-eye reduction flash *Support flash zooming (auto) *Built-in AF assist beam emitter (AF Lamp) *Settings saved automatically *Compatible with YongNuo/ Nikon series flashes *Support PC port triggering strobe flashes *PC port support front/rear curtain sync and high-speed sync(Super Sync)function *Support single-contact of camera & flash triggering (max sync speed is 1/250s) Suitable With Camera: -D70 D70S D60 D80 D90 D4 D3X D3S D3 D2X D40X D40 -D800E D800 D700 D600series D300S D300 D200 -D7000 D5300 D5200 D5100 D5000 D3200 D3100 D3000 Flash compatible (i-TTL): -SB600 SB700 SB800 SB900 SB910 -YN467N YN468N(II) YN560II YN560III YN565N YN568N Package Include - 2 x YN-622N II Transceivers -1 x Instruction in English and Chinese -1 x Original Yongnuo Box Note:Batteries & Camera &Flash not included 

Includes: Wireless Flash Trigger for Canon (1 Transmitter, 1 Receiver). Multi-purpose trigger set allows you to wirelessly trigger your camera or flash. Operating Distance: up to 30 meters (100ft) Compatible with all Canon cameras with a standard hot-shoe. Backed with Digital Goja 90-Day 100% Satisfaction.

Buy TRIOPO G Wireless Flash Trigger G Receiving Transmitting Dual Purpose TTL High speed Trigger for... for R879.00

The wireless transceiver is a high performance 2.4G wireless flash trigger designed for Nikon users It can remote change flash exposure compensation or flash output of each group, supports different flash mode mix Compatible shutter sync: front-curtain sync, rear-curtain sync and high-speed sync (HSS / FP), the highest sync speed is 1 / 8000S PC -port support front-rear curtain sync and high-speed sync (super sync) function support single-contact of camera & flash triggering Support remote set the parameters of flash through the transceiver (remote control mode) support I-TTL / manual / repeating flash mode mix using Features: Compatible flash mode: i-TTL, manual flash, Compatible Shutter sync: Front-curtain sync, rear-curtain sync and high-speed sync (HSS/ FP), the highest sync speed is 1/ 8000s. Support FEC, FVL function, Support modeling flash and red-eye reduction flash, Support flash zooming (auto), Built-in AF assist beam emitter (AF Lamp), Settings saved automatically, Compatible with Yongnuo/Nikon series flashes. Support PC port triggering strobe flashes. Specifications: System Type: Digital FSK 2.4GHz wireless transceiver, Distance: 100m, Channel: 7, Flash Mode: i-TTL manual flash, SYNC Mode: Front-curtain sync, rear-curtain sync, hi-speed sync (Auto FP), Group Control: 3Groups (A/ B/ C), Sync Speed: 1/ 8000s, Input: Hot Shoe, Output: Hot shoe, PC port, Compatible type of flash: Hot-shoe flash, Strobe flash, Battery: AAx2 (support 1.2V rechargeable battery), Standby Time: 60h, Dimension: 89.5 x 53 x 39mm, Weight: Approx. 220g, 100% Brand New. Suitable for: Compatible camera list: Nikon: D70 D70S D80 D90 D200 D300 D300S D600 D700 D800 D3000 series/D5000 series/D7000 series Compatible i-TTL flash list: Yongnuo: YN465N YN467N YN-468N(II) YN565N YN568N. Nikon: SB-400 SB-600 SB-700 SB-800 SB-900 SB-910. Package Includes: 1 x Transceivers, 1 X English Manual, 1 X Original Packing.