St lab hdmi

Allows HDMI signal to be transmitted by long HDMI cable Allows unlimited cascading HDMI 1.3 compatible Supports signal rate up to 2.5Gbps HDCP compliant Easy installation Metal case

ST Lab 16 port network switch M with power supply & network cable. All 100%. IAN am - 7pm ONLY please) ITEM IS LOCATED IN BLAAUWBERG RD, TABLE VIEW,

Converts component video and analog audio (R/L) into HDMI Supports resolution up to p HDMI 1.3 compatible Easy installation Metal case

Chipset: C-Media 8768 Compliant with PCI Specification, Rev. 2.2. PCI Plug and Play (PnP) bus interface. 24-bit PCI bus master. MPU-401 MIDI UART port ACPI and PCI PMI support Multi-channel AC-link supported alternatively 3.3V operating supply Full-duplex playback and recording. HRTF 3D positional audio, supporting both DirectSound 3D® & A3D® interfaces. Also supports earphones, 2/4/6/8 channel speakers mode. Built-in 32 OHM Earphone buffer. Downloadable Wave Table Synthesizer, supporting Direct Music®. 7/8 channel supports under Windows XP only. Stereo Mixer 1) Stereo analog mixing from CD-Audio and Line-in 2) Stereo digital mixing from Voice, FM/Wave-table, and Digital CD-Audio 3) Mono mixing from MIC. Software adjustable volume. MIDI Interface:Fully compatible with MPU-401 Midi UART and Sound Blaster Midi mode/Standard IBM PC joystick/back stereo port (dual channels) System Requirements: Pentium-class computer with one available PCI slot Windows® 2000, XP, 2003, Vista DirectX 8.1 above is required

Chipset: C-Media CMI8738 Features: Full-duplex playback and recording. Built-in 16-bit CODEC HRTF 3D positional audio, supporting both DirectSound 3D® & A3D® interface. Also support earphones, 2/4/6 channel speaker mode Built-in 32 OHM Earphone buffer Downloadable Wave Table Synthesizer, supporting Direct Music® PCI Rev. 2.2 compliant with bus mastering modes ACPI compliant power down management Support Windows® 2000, XP/2003 and Vista System Requirements Pentium-class computer with one available PCI slot Windows® 2000, XP/2003, Vista DirectX 8.1 above is required

Chipset: VIA VT Compliant with PCI Express Base Specification 1.1 Compliant with IEEE a- and OHCI 1.1 Standards PCI Express 1-lane(x1) FireWire adapters works with PCI Express slots with different lane width Installs in any available PCI Express slot and supports data transfer rates up to 400Mbps Provide two external FireWire a) 6-pin ports and one internal FireWire a) 6-pin port ¨C sharing with first external FireWire 400 port Support DV camcorders, hard disk, removable drives, scanner, digital cameras and other FireWire audio/video devices Onboard power connector to provide reliable power source System Requirements: Windows® , XP/-bit, Vista -bit, -bit PCI Express-enabled system with an available PCI Express slot

Connect VCR, camcorder, or any other analog video source to desktop or notebook PC and capture audio/video in MPEG 1/2 format supports USB 2.0 Plug-and-play USB interface Video Encoding: Support MPEG 1&2 NTSC up to 720 x 480 PAL up to 720 x 576 Video Standard: NTSC/PAL/SECAM Video Input Video 1: Composite Video (RCA) Video 2: S-Video (Mini-DIN) Audio Input Audio Input: Stereo Analog (RCA) Support Windows® XP/Vista/ bit) System Requirements: Windows® XP/Vista/ bit) Available USB 2.0 Port

Compliant with USB specification, revision 2.0 Supports suspend and wake-up modes Functionality: primary, extended or mirror Resolution: up to x -bit color DVI output 16MB Display Memory Allows multiple connection in a single PC Bus Powered no external power supply needed Support Windows® , XP bit, Vista bit, bit Bus Interface USB 2.0 Connector VGA: HD D-sub 15 pin Female Connector DVI: DVI-I Connector System Requirements Windows® , XP bit, Vista bit, bit Available USB 2.0 Port

Functionality: primary, extended or mirror Resolution: up to x -bit color VGA output 16MB Display Memory Allows multiple connection in a single PC Bus Powered: no external power supply needed Operating System Supported Windows Windows XP bit Windows Vista bit

Fully compliant with ExpressCard Specification 1.0 ExpressCard/34 Form Factor Module Fully compliant with IEEE u and ab M data rate auto-negotiation LEDs indicate the status of data transmission Support Wake On Lan (WOL) power management (optional) Feature full duplex mode that doubles that the network System Requirements: Windows® , XP//Vista/ bit) ExpressCard-enabled system with an available ExpressCard slot

Fully compliant with USB specification revision 2.0 Supports data transfer rate up to 480Mb/s Hot-plug and hot-swap support allows for you to connect/detach devices without first turning off the system Work with USB-based ExpressCard devices System Requirements: Pentium® or equivalent notebook with an available USB port Windows® /XP/Server /Vista

Specification: Fully compliant with ExpressCard Specification 1.0 ExpressCard/34 Form Factor Module No IRQ, DMA, I/O Address resources required Hot swappable Easy plug & play Single Printer Port Interface DB 25 pin female System Requirements: Windows® , XP/ bit, Vista bit, bit) ExpressCard-enabled system with an available ExperssCard slot Accessories: 1 x User Manual, 1 x Fan out cable (DB26 male to DB25 Female)

Compliant with PCI Express Base Specification 1.0a Supports 2 x UART serial port Built-in 16C compatible UART On chip 256 byte FIFOs in transmit and receive path of each serial port Serial data transfer rate up to bps Supports Standard Parallel Port (SPP), Enhanced Parallel (EPP) & Enhanced Capability Port (ECP) Parallel data transfer rate up to 1.5Mbps Bus: PCI-Express x1 Connectors: 2 x DB9 male serial connectors 1 x DB25 female parallel connector System Requirements: Windows® XP/Vista/ bit) PCI Express-enabled system with an available PCI Express slot

Chipset: Silicon Image Bus Interface: PCI bus 32 bit Features: Compliant with UltraDMA6 ATA/133 specifications Compliant with PCI v2.2 Plug-n-Play Provides two independent Ultra ATA channels Full ACPI power management support Supports Ultra DMA 0-6 and Multi-word DMA 0-2 Supports hard drives larger than 137GB Supports RAID 0(Striping),RAID1(Mirroring) and RAID 0+1(Mirror+Striping) CRC(Cyclical Redundancy Check) error-checking provides data verification and achieves flawless data transfer Achieves burst data transfer rates up to 133MB/sec Works with various brand of Ultra ATA hard disk drives System Requirements: Pentium-class computer with an available PCI slot Windows® , XP/bit, Vista bit, bit

Chipset: C-Media Compliant with PCI Specification, Rev. 2.2. PCI Plug and Play (PnP) bus interface. 24-bit PCI bus master. MPU-401 MIDI UART port ACPI and PCI PMI support Multi-channel AC-link supported alternatively 3.3V operating supply Full-duplex playback and recording. HRTF 3D positional audio, supporting both DirectSound 3D® & A3D® interfaces. Also supports earphones, channel speakers mode. Built-in 32 OHM Earphone buffer. Downloadable Wave Table Synthesizer, supporting Direct Music®. 7/8 channel supports under Windows XP only. Stereo Mixer 1) Stereo analog mixing from CD-Audio and Line-in 2) Stereo digital mixing from Voice, FM/Wave-table, and Digital CD-Audio 3) Mono mixing from MIC. Software adjustable volume. MIDI Interface:Fully compatible with MPU-401 Midi UART and Sound Blaster Midi mode/Standard IBM PC joystick/back stereo port (dual channels) System Requirements: Pentium-class computer with one available PCI slot Windows® , XP, , Vista DirectX 8.1 above is required