Poe adapter

Buy Ubiquiti PoE Adapter Gigabit 48V 15W | U-POE-AF - 12 Month Carry-In for R159.00

Buy Ubiquiti PoE Adapter Gigabit 48V 15W | U-POE-AF for R162.00

Buy Ubiquiti Gigabit PoE Adapter 48V 30W with Type N Cable | U-POE-AT for R455.00

Features.Gigabit PoE adapter for powering any RouterBOARD over Gigabit Ethernet

Buy PoE Texas Power Over Ethernet Charger for Apple Lightning Adapter TS-POE/LIGHT:P for R1,380.00

Barely used for 2 Voip Phones. The CNP-POEI is a Power over Ethernet Injector which can Inject power into a non-powered eternet cable and deliver Electrical Current to PoE compliant devices such as APs, IP Cameras or IP Phones, where there are no power lines or outlets available. It fully complies with IEEE af standard, and can work with all IEEE af PoE compliant PDs (Powered Devices) or PoE reciever adapters, such as Canyon’s CNP-POES. The instalation is very simple (Plug-and-play), and there is no configuration or software required. IEEE af compliant PoE Injector Delivers power up to 100 meters Auto-determine the necessary power requirements Plug-and-Play, no configuration required External power adapter supply  

The CNP-POEI is a Power over Ethernet Injector which can Inject power into a non-powered eternet cable and deliver Electrical Current to PoE compliant devices such as APs, IP Cameras or IP Phones, where there are no power lines or outlets available. It fully complies with IEEE af standard, and can work with all IEEE af PoE compliant PDs (Powered Devices) or PoE reciever adapters, such as Canyon’s CNP-POES. The instalation is very simple (Plug-and-play), and there is no configuration or software required. IEEE af compliant PoE Injector Delivers power up to 100 meters Auto-determine the necessary power requirements Plug-and-Play, no configuration required External power adapter supply  

IN STOCK at supplier. If ordered before 12PM: DELIVERED next day (main centres) or 2-3 days (regional areas or large items) COLLECTION from Geewiz available Same Day (approx 4pm) POE-GIG, MikroTik Gigabit PoE adapter is designed to power any RouterBOARD over Gigabit Ethernet. Simply connect your power source and then use an Ethernet cable to connect the injector to the RouterBOARD device.  The POE-GIG reduces the number of wires that lead up the tower. Power over pins 4 and 5 is used to power and communicate with 10/100/1000 Mbps devices. It can be used with any Gigabit RouterBOARD that supports 9-48V PoE.   SPECIFICATIONS - PoE: Passive PoE (non 802.3af)  - Input Voltage: 9-48V DC (Accepts up to 56V) - Output Voltage: any - Power: 4,5 Cable Pins - 9-48V; 7,8 Pins -Return  - Max. Current: 2A  - Ethernet Cable Length: Up to 60m  - Ethernet Speed: 10/100/1000 Mbps Please note that this item requires a 9-48V DC plug to function.

Description TP-Link TL-POE150S PoE Injector Adapter The TP-Link TL-POE150S PoE Injector Adapter fully complies with IEEE 802.3af standard and can work with all IEEE 802.3af PoE compliant PDs (Powered Devices) or PoE Receiver Adapters, such as TP-LINK’s TL-POE10R, or other equivalent product, to expand your network to where there are no power line or outlet, where you wish to fix device such as AP, IP Camera or IP Phone, etc.

This 4 port 10/100Mbps PoE switch is with 48V/1.25A external power,it provides an easier installation way for PoE devices,such as IP cameras,wireless AP,VoIP. And it can detect your PoE devices according to PoE standard.So the users do not need to worry about the PoE switch will damage their PoE devices. The max transmission distance is 100 meters with Cat5 cables. Ideally,shorter cable would reduce the power degradation over the cables; with high quality cables also can reduce power loss.Plug & play design make the installation quite easy,users do not need any configuration,which make this PoE switch a very good choice for IP cameras,wireless AP,VoIP users. IEEE 802.3af Power over Ethernet PoE compliant. Supports 10/100Mbps fast Ethernet. 48V/1.25A External power supply. Max power for single PoE port is 15.4W. Automatically detects the PoE class level of a Powered Device. 1Gbps bandwidth. Store-and-forward switching method. Plug and Play. General Quantity 1 piece Material ABS + metal Other Features Other Features Standards and protocols the IEEE 802.3 standard The IEEE 802.3 u 100 base - TX The IEEE 802.3 ab 1000 base-t The IEEE 802.3 af power Ethernet (POE) IEEE 802.3 x flow control Interface port 4 * 100 m POE (automatic negotiation, auto-mdix) Port 5 is a 10/100 MBPS uplink port Data transfer rate Ethernet: 10/100 Mbps (half/full duplex) Forward rate 148800 100 Mbps/polyphenylene sulfide (PPS)/polyphenylene sulfide (PPS), 10 Mbps, 14880 Power input: 100 ~ 50/60 V/Hz 48 v / 1.25 A external force DC48V The power supply pins (36 (12):) The index of electric power, POE/activities, link Environmental operating temperature: 0 to 40 Storage temperature: 40-70 Working humidity: 10% to 90%, without condensation Store humidity: 5% to 5%, without condensation Dimensions & Weight Dimensions 7.87 in x 7.09 in x 1.57 in (20 cm x 18 cm x 4 cm) Weight 17.64 oz (500 g) Packing List 1 * PoE switch 1 * Adapter(1m) 2 * Accessories

The Cudy PE25 2.5Gbps PCI Express Network Adapter is a great way to expand your Desktop PCs network options. It features a high-speed Ethernet port that supports 2.5Gbps speeds over a standard Cat5e or higher cables at distances up to 100m. Whether you use a personal PC or a hosting server, this network adapter gives you the performance you need to get the job done. Its PCI Express 1x slot makes it simple and easy to install on any motherboard that supports PCI-E x1. FEATURES: IEEE802.3bt/IEEE802.3at/IEEE802.3af compliant IP67 waterproof enclosure for outdoor use One gigabit PoE input port and Two-gigabit output PoE ports Extend additional 100 meters for PoE Network Wall-Mount design for any application scenario Plug and play, no additional power supply required SPECIFICATIONS: Chipset: RTL8125 Standards: IEEE 802.3 / IEEE 802.3u / IEEE 802.3ab / IEEE 802.3az / IEEE 802.3bz Network media: 10Base-T,cat3 or above UTP,1000Base-Tx,cat5 or above UTP Data rate: 10/100/1G/2.5Gbps Interface: PCI Express 1x slot Auto MDIX: YES Full Duplex Support: YES MTBF: 376,212 Hours LED Indicator: Link/Act, Speed Port number: 1 x RJ45 Support OS: Windows®10(32/64), Win7 (32/64), Win8,8.1 (32/64) Windows Server® 2012, 2008 LINUX up to 4.15 Product Dimensions: 7.2 x 5 x 0.2 cm WHAT’S IN THE BOX: Cudy PE25 2.5Gbps PCI Express Network Adapter – Black/Red x1

1. Introduction - The adapter is an use Power Line or Coax and Twisted Pair(only two copper line) for Ethernet data communication adapter. Support plug and play, plug in outlet or link transmission cable will easily extend Ethernet length limit. Adapter in power line transmit distance up 500 meters max, in coax or twisted pair up to 2000meters max. - The adapter support up 200Mbps date rate, support QoS. Built-in filter have better anti-interference, can pass downlink power meter and use any one phase of three-phase 380V AC power for Ethernet data communication. - The Adapter support 128bit AES or 3DES encryption. Built-in WEB management. You can set Privacy Network group and adapter AP/ EP mode. 2. Feature - Support HomePlugAV, IEEE802.3, IEEE802. 3U standard; - Use Existing power line or Coax & twisted pair; - Up 200Mbps data rate, support point to point or multi-point; - Up 500m power line, 2000m coax long distance; - Support Qos VLAN, for HQ Ethernet user; - Support 128BIT AES 3DES encryption; - Built-in WEB manager UI, no need install other software; - Built-in filter and relay route function, for complex environment; - Global wide input voltage range AC 100-240V, 50/60Hz.     General Material ABS Quantity 1 set Other Features Cable Length 140cm Connector BNC , RJ45 Power Adapter US Plug Power Supply AC 100~240V Dimensions & Weight Dimensions 6.3 in x 4.33 in x 1.54 in (16 cm x 11 cm x 3.9 cm) Weight 17.81 oz (505 g) Packing List 2 x Adapters 2 x US Plug power cable (140cm) 1 x English user manual 1 x Chinese user manual

Description Tenda 10/100Mbps POE Injector Tenda 10/100Mbps POE Injector PoE15F can realize the synchronous transmission of network data and power through an Ethernet cable (Cat.5 or better). The output power of each port is as high as 15W, which can be exported as PoE equipment (via RJ45 port). You can connect to ieee802.3af’s PD, such as wireless AP, IP camera, IP phone, etc. In a sense, reducing installation costs and improving network performance is a good choice. Features: Delivers power and data through one Ethernet cable for easy network extension Compatible with IEEE 802.3af compliant powered devices PoE Port Delivers power up to 100 meters Plug and Play, no configuration required Power Over Ethernet One PoE port to power connected devices for flexible network deployment IEEE 802.3af compliant Compatible with IEEE 802.3af compliant powered devices Extend Power Supply Distance of power transmission via Ethernet cable is up to 100 meters Plug and Play Hassle-free setup, no configuration required Specifications: Network standards IEEE802.3、IEEE802.3u LED Indicator Link/Act, PoE Status Interfaces 1*10/100 Base-TX Ethernet ports(Data/PoE) 1*10/100 Base-TX Ethernet ports(Data) Transmission media Recommended: CAT5/5e UTP or better Dimension 84.5mm*44mm*29.8 mm Level of protection ESD: Air discharge: ±10kV Contact discharge: ±8kV Forwarding mode Store-and-forward Transmission Rate 100Mbps PoE budget Single port: AF: 15.4W Whole device: 15W Power consumption 15W Input voltage 100－240V AC 50/60Hz 48V/0.3A DC（Power Adapter Output） Mounting Desktop mounting: support Environment Operating Temperature: 0℃~45℃ Storage Temperature: -40℃~70℃ Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing Certification FCC、CE、RoHS b'/xc2/xa0' Why not browse our wide variety of Tenda Products HERE

Tenda 10/100Mbps POE Injector Tenda 10/100Mbps POE Injector PoE15F can realize the synchronous transmission of network data and power through an Ethernet cable (Cat.5 or better). The output power of each port is as high as 15W, which can be exported as PoE equipment (via RJ45 port). You can connect to ieee802.3af’s PD, such as wireless AP, IP camera, IP phone, etc. In a sense, reducing installation costs and improving network performance is a good choice. Features: Delivers power and data through one Ethernet cable for easy network extension Compatible with IEEE 802.3af compliant powered devices PoE Port Delivers power up to 100 meters Plug and Play, no configuration required Power Over Ethernet One PoE port to power connected devices for flexible network deployment IEEE 802.3af compliant Compatible with IEEE 802.3af compliant powered devices Extend Power Supply Distance of power transmission via Ethernet cable is up to 100 meters Plug and Play Hassle-free setup, no configuration required Specifications: Network standards IEEE802.3、IEEE802.3u LED Indicator Link/Act, PoE Status Interfaces 1*10/100 Base-TX Ethernet ports(Data/PoE) 1*10/100 Base-TX Ethernet ports(Data) Transmission media Recommended: CAT5/5e UTP or better Dimension 84.5mm*44mm*29.8 mm Level of protection ESD: Air discharge: ±10kV Contact discharge: ±8kV Forwarding mode Store-and-forward Transmission Rate 100Mbps PoE budget Single port: AF: 15.4W Whole device: 15W Power consumption 15W Input voltage 100－240V AC 50/60Hz 48V/0.3A DC（Power Adapter Output） Mounting Desktop mounting: support Environment Operating Temperature: 0℃~45℃ Storage Temperature: -40℃~70℃ Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing Certification FCC、CE、RoHS b'/xc2/xa0' Why not browse our wide variety of Tenda Products HERE

Buy TP-LINK PoE Injector Adapter, IEEE 802.3af Compliant | TL-POE150S for R383.00

Buy Planet 802.3af PoE SIP Analogue Telephony Adapter (ATA) - 2*RJ45 - T.38 FoIP for R2,036.21

Buy Folksafe 16-Port 10/100Mbps PoE Switch 300w PSU Adapter for R2,990.00

Mikrotik RouterBoard 951i, 1 x PoE Out, 5 port LAN, 2.4GHz AP is a wireless SOHO AP with a new generation Atheros CPU and more processing power. It has five Ethernet ports, one USB 2.0 port and a high power 2.4GHz mW b/g/n wireless AP with antennas built in. The MikroTik RouterBoard part number for this product is: RB951Ui-2HnD. It has a 600MHz CPU,128MB of RAM and PoE output function for port #5 - it can power other PoE capable devices with the same voltage as applied to the unit. Maximum load on the port is 500mA. Package contains RouterBOARD 951Ui-2HnD in a plastic case and power adapter. Specifications: CPU speed: 600MHz. CPU cores: 1. RAM: 128. LAN ports: 5. Gigabit: No. MiniPCI: 0. Integrated Wireless: Yes. Wireless standards: b/g/n. USB: 1. Power Jack: Yes. af support: No. PoE: 8-30V DC on Ether1. Voltage Monitor: No. PCB temperature monitor: No. CPU temperature monitor: No. Operating System: RouterOS. Temperature range: -20C +50C. RouterOS License: L4. Antenna gain: 2.5dBi. Current Monitor: No. TX power: 30dBm. Max Power consumption: Up to 7W. SFP ports: 0. Dimensions: 113 x 138 x 29mm

Specifications Standard & Protocol: IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE802.3ab, IEEE 802.3af, IEEE 802.3at MTBF: 50,000 hours (about 5 years) Indicator: Link/Act, PoE Status, Power, 100M Fixed Port: 8x 10/100Base-TX RJ45 Ports (Data/Power) Fixed Port: 1x 10/100Base-TX RJ45 Port (Data) Lightning Protection: 6KV Wire-speed forwarding: Supported Switching Capacity: 1.8 Gbit/s MAC Address Table: 4K MAC PoE supply management - Ports 1 to 8 support standard IEEE802.3at/af power (maximum power for each port is 30W)PoE power type is end-span (1245+, 3678- line pair) in full configuration - PoE Max Power Supply58W Input Voltage AC100240V 50/60Hz Input Voltage DC51V /1.25A Power Adapter Operating Temperature: 0~40 Storage Temperature: -40~70 Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing Dimensions: 177.5mm x 104mm x 26mm (W D H)

Planet Single Port 10/100/1000Mbps Ultra POE Injector (60 Watts) -w/external power adapter

IN STOCK at supplier. If ordered before 12PM: DELIVERED next day (main centres) or 2-3 days (regional areas or large items) COLLECTION from Geewiz available Same Day (approx 4pm) NB - We will be closed Mon/Tues 1/2 October for the end Sukkot. All orders placed will be processed on Wed 3 October. PRODUCT DESCRIPTION PSU-24V60W, 24V 2.5A adapter, is ideal when you require a power supply with sufficient current for your application. The power input is 100V-240V ac via IEC power cable (Not included). Could be used with POE-4G, or POE-8G units to provide passive power to PoE devices. Not recommended for IP phones or cameras unless specified that the unit supports 24V passive POE.

IN STOCK at supplier. If ordered before 12PM: DELIVERED next business day (main centres) or 3-5 business days (regional areas or large items) COLLECTION from Geewiz available Same Day (approx 4:30pm) PRODUCT DESCRIPTION PSU-48V120W, 48V 2.5A adapter is ideal when you require a power supply with sufficient current for your application. The power input is 100V-240V ac via Kettle power cable (Not included). Could be used with POE-4G, or POE-8G units to provide passive power to PoE devices such as IP phones or cameras as an alternative to the 802.3af/at POE switches. Compatible with POE-8GAT.

POE-24X, by Ubiquiti, is a 24V, 1A PoE Gigabit Adapter which provides earth grounding and surge protection. Helps protect against ESD attacks and powers Ubiquiti airFiber AF-5X.

IN STOCK at supplier. If ordered before 12PM: DELIVERED next day (main centres) or 2-3 days (regional areas or large items) COLLECTION from Geewiz available Same Day (approx 4pm) Power Supply: 15.4W (Max. 48VDC) Expands network to areas with no power lines or outlets Ideal for use with access points and IP cameras Delivers power up to 100 meters (328 feet) Two Gigabit Ethernet ports for lightning-fast wired speeds Auto-detects the required power supply Plug and Play, no configuration required

TP-LINK CPE510 - radio access | CPE510 Brand New & Sealed * Original Product * Valid Manufacturer's Guarantee * Fast Delivery TP-Link Product Code: CPE510 Availability: 19 in Stock Built-in 13dBi dual-polarized antenna Directional antenna 6000V Lightning protection 15KV ESD protection Weather proof enclosure Passive PoE adapter Overview TP-LINK's 5GHz 300Mbps 13dBi outdoor CPE, the CPE510 is dedicated to cost effective solutions for outdoor wireless networking applications. With its centralized management application, it is flexible and ideal for point-to-point, point-to-multipoint and outdoor Wi-Fi coverage applications. Professional performance, coupled with user-friendly design, makes CPE510 an ideal choice for both business and home users. Specifications Product Description TP-Link CPE510 - radio access point Device Type Radio access point Form Factor External RAM 64 MB Flash Memory 8 MB Data Link Protocol IEEE 802.11a, IEEE 802.11n Frequency Band 5 GHz Included Accessories PoE injector, pole mount OS Required UNIX, Apple MacOS, Novell NetWare, Microsoft Windows 98 Second Edition, Linux, Microsoft Windows NT, Microsoft Windows 2000/XP/Vista/7/8 Power Over Ethernet (PoE) Supported PoE Dimensions (WxDxH) 7.9 cm x 6 cm x 22.4 cm Delivery & FAQ's * Metropolitan Areas - Delivery of this item within 3 business days after payment reflects * Outlying Areas - Please allow 5 business days after payment reflects for delivery of this item This item carries a valid manufacturers warranty/guarantee. Manufacturer's Code: CPE510 TP-Link

The UAP-AC-LITE by Ubiquiti features an ultra-compact design, the UniFi AC Lite AP delivers a cost-effective combination of value and performance in a reduced footprint: 25% smaller than the standard UniFi AP. The UniFi AC Lite AP provides simultaneous, dual-band, 2x2 MIMO technology. The UniFi 802.11AC Dual-Radio APs feature the latest in Wi-Fi 802.11AC MIMO technology and offers unlimited scalability. Specifications: - Networking Interface: (1) 10/100/1000 Ethernet Port - Buttons: Reset - Antenna: (2) Dual-Band Antennas, 3 dBi Each - Wi-Fi Standards: 802.11 a/b/g/n/ac - Power Method: Passive Power over Ethernet (24V), (Pairs 4, 5+; 7, 8 Return) - Power Supply: 24V, 0.5A Gigabit PoE Adapter (Supplied in Single Pack only) - 24v passive PoE: Supported - 802.3af PoE: Supported 'Mode A' only - Maximum Power Consumption: 6.5W - Maximum TX Power 2.4 GHz: 20 dBm - Maximum TX Power 5 GHz: 20 dBm - BSSID: Up to Four per Radio - Power Save: Supported - Wireless Security: WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES) - Mounting: Wall or Ceiling (Kits Included) - Operating Temperature: -10 to 70° C - Operating Humidity: 5 to 95% Noncondensing - Dimensions: 160 x 160 x 31.45 mm - Weight: 170g - Weight with Mounting Kits: 185 g

The UAP-AC-LR by Ubiquiti is ideal for long-range deployments. The UniFi AC LR AP offers simultaneous, dual-band operation with 3x3 MIMO in the 2.4 GHz band and 2x2 MIMO in the 5 GHz band. The innovative antenna design provides a long-range, symmetrical-link coverage area, and the antenna gain of the UniFi AC LR AP performs better than one-way, high transmit power does for connecting distant clients. The UniFi 802.11AC Dual-Radio APs feature the latest in Wi-Fi 802.11AC MIMO technology and offers unlimited scalability Specifications: - Networking Interface: (1) 10/100/1000 Ethernet Port - Buttons: Reset - Antennas: (1) Dual-Band Antenna, Tri-Polarity, 2.4 GHz: 3 dBi, 5 GHz: 6 dBi - Wi-Fi Standards: 802.11 a/b/g/n/ac - Power Method: Passive Power over Ethernet (24V), (Pairs 4, 5+; 7, 8 Return) - Power Supply: 24V, 0.5A Gigabit PoE Adapter (In single pack only) - 24v passive PoE: Supported - 802.3af PoE: Supported 'Mode A' only - Maximum Power Consumption: 6.5W - Maximum TX Power 2.4 GHz: 24 dBm - Maximum TX Power 5 GHz: 22 dBm - BSSID: Up to Four per Radio - Power Save: Supported - Wireless Security: WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES) - Mounting: Wall or Ceiling (Kits Included) - Operating Temperature: -10 to 70° C - Operating Humidity: 5 to 95% Noncondensing - Dimensions: 175.7 x 175.7 x 43.2 mm - Weight: 240g - Weight with Mounting Kits: 315 g

Ubiquiti's LiteBeam 5AC Gen 2 directs RF energy in a tighter beam-width. With the focus in one direction, the LiteBeam 5AC Gen 2 blocks or spatially filters out noise, so noise immunity is improved. This feature is especially important in an area crowded with other RF signals of the same or similar frequency. Ubiquiti’s InnerFeed® technology integrates the radio into the feed-horn of an antenna, so there is no need for a cable. This improves performance because it eliminates cable losses. The LiteBeam AC Gen2 is a lightweight, cost effective airMAX® ac CPE with Dedicated Management Radio. It features enhanced protection against power surges and the LiteBeam 5AC Gen 2 also offers a more robust mount with separate azimuth and elevation adjustments. Specifications: Operating Frequency Worldwide: 2412 - 2462 MHz & 5150 - 5875 MHz Gain: 23 dBi Networking Interface: (1) 10/100/1000 Ethernet Port Processor Specs: MIPS 74Kc Memory: 64 MB DDR2 Power Supply: 24V, 0.3A Gigabit PoE Adapter (Included) Max. Power Consumption: 7W Power Method: Passive PoE (Pairs 4, 5+; 7, 8 Return) Supported Voltage Range: 24V ± 10% LEDs: Power, Ethernet Channel Size PtP Mode: 10/20/30/40/50/60/80 MHz Channel Size PtMP Mode: 10/20/30/40 MHz Enclosure Characteristics: Reflector (SGCC 0.6T) / Plastic: PC Mounting: Pole-Mounting Kit (Included) Wind Loading: 275 N @ 200 km/h Wind Survivability: 200 km/h ESD/EMP Protection: ± 24 kV Contact / Air Operating Temperature: -40 to 70° C Operating Humidity: 5 to 95% Non-condensing Dimensions: 358 x 271.95 x 272.5 mm Weight Without Mount: 800 g Weight With Mount: 980g