Ortofon concord

Ortofon QBert Cartridge Twin Pack. Technical Specifications: Output Voltage @ Hz, 5cm/sec: 11 mV Channel Balance @ 1kHz: 1.5 dB Channel Separation @ 1kHz: 22 dB Frequency Range @ -3 dB: 20Hz - 20kHz Frequency Response: 20Hz - 20kHz, -3 dB FIM Distortion @ Recommended Tracking Force, DIN: Tracking Ability @ 315 Hz at Recommended TrackingForce: 90 µm Compliance, Dynamic, Lateral: 12µm/mN Stylus Type: Spherical Stylus Tip Radius: R 18µm Equivalent Stylus Tip Mass: 0.6 mg Tracking Force Range: 3.0 g (30 mN) Tracking Force Recommended: 4.0 g (40 mN) Tracking Angle: 20° Internal Impedance, DC Resistance: Ohm Internal Inductance: 920 mH Recommended Load Resistance: 47 kOhm Recommended Load Capacitance: pF Cartridge Weight: 18.5 g 1 year limited guarantee For more info on this product please click here

Scratching and back-cueing impose heavy mechanical stress on the cantilever and its rubber bearing. Therefore, the Ortofon disco cartridges are equipped with cantilevers made from aluminum tube with increased wall thickness. Special attention has also been paid to the attachment of the bearing and the design of the bearing itself. This means that rough treatment will neither damage the cartridge nor degrade its stability. Technical Specifications: Output voltage at Hz,5cm/sec.: 7 mV Channel balance at 1 kHz: 1,5 dB Channel separation at 1 kHz: 25 dB Channel separation at 15 kHz: 15 dB Frequency range: Hz Frequency response: Hz + 3 / - 2 dB FIM distortion at recommended tracking force, DIN : Tracking ability at 315Hz at recommended tracking force: 80 µm Compliance, dynamic, lateral: 6 µm / mN Stylus type: Spherical Stylus tip radius: R 18 µm Equivalent stylus tip mass: 0,6 mg Tracking force range: g ( mN) Tracking force, recommended: 4,0 g (40 mN) Tracking angle: 20° Internal impedance, DC resistance: 750 Ohm Internal inductance: 450 mH Recommended load resistance: 47 kOhm Recommended load capacitance: pF Cartridge colour, body/stylus: Neon red / Neon red Cartridge weight: 18,5 g Replacement stylus unit: Scratch 1 year limited guarantee For more info on this product please click here

Co-designed by various DJs. Especially developed for scratch and back-cueing. Very high output! As implied by the name, the Scratch is intended especially for the disciplines of scratch and back-cueing. Like the QBert, DJs had a say in designing this cartridge so it would match the needs of dance floor kings. It is made of a fluorescent neon-red material with the intention it becoming highly apparent in spotlight and luminous in ultraviolet light. For DJs that require increased tracking ability, the Scratch is up to the task. Featuring a reinforced rubber suspension, DJs need not worry about compromising sound quality and stylus life when working with higher tracking forces. With solid bass reproduction and extended highs, the Scratch is great for any style, providing energetic, in-your-face sound. Maximum scratch performance guaranteed! Specifications: Output voltage at Hz, 5cm/sec.   7 mV Channel balance at 1kHz   1,5 dB Channel separation at 1kHz   25 dB Channel separation at 15 kHz    15 dB Frequency range at -3dB    Hz Frequency response    Hz 3dB/-2dB Tracking ability at 315 Hz at recommmende tracking force     80 μm Compliance, dynamic lateral     6 μm/m N Stylus type    Spherical Stylus tip radius     R 18 μm Tracking force range     g ( mN) Tracking force recommended    4,0 g (40 mN) Tracking angle     20° Internal impedance, DC resistance    750 OhmInternal inductance   450 mH Recommended load resistance     47 kOhm Recommended load capacitance     pF Cartridge weight     5 g Replacement stylus unit     scratch For more info on this product please click here

Technical Specifications: Output Voltage at Hz,5cm/sec.: 6 mV Channel Balance at 1 kHz: 2 dB Channel Separation at 1 kHz: 23 dB Channel Separation at 15 kHz: 15 dB Frequency Range at - 3dB: Hz Frequency Response: Hz ± 2 dB FIM Distortion at Recommended Tracking Force, DIN : Tracking Ability at 315Hz at Recommended Tracking Force: 80 µm Compliance, Dynamic, Lateral: 9 µm/mN Stylus Type: Special elliptical Stylus Tip Radius: r/R µm Equivalent Stylus Tip Mass: 0,6 mg Tracking Force Range: g ( mN) Tracking Force, Recommended: 3,0 g (30 mN) Tracking Angle: 20° Internal Impedance, DC Resistance: 750 Ohm Internal Inductance: 450 mH Recommended Load Resistance: 47 kOhm Recommended Load Capacitance: pF Cartridge Colour, Body/Stylus: Blue/Blue Cartridge Weight: 18,5 g Replacement Stylus Unit: DJ E 1 year limited guarantee For more info on this product please click here

The world's first needle designed specifically for coded vinyl with low wear! Finally, technology has become an art. The Giditrack is the perfect marriage of easy and function. You can now manupulate MP3's with the style and feel of a turntablist and the tradition of a turntable.  The DigiTrack responds to the generation of turntable DJs who make extensive use of timecoded vinyl applications, such as Serato (TM) and FinalScratch (TM). With DigiTrack's low wear design and tailored frequency response increase the lifespan of timecoded vinyl records, and provides high quality sound reproduction for playing conventional vinyl records as well.  DigiTrack also features excellent groove-handling capabilities for scratch and mix performance, as well as increased output voltage for improved TCV performance and better sound quality from your mixer's phono preamps. High output and the best mix and scratch ability! Specifications: Output voltage at Hz, 5cm/sec.     8 mV Channel balance at 1kHz     1,5 dB Channel separation at 1kHz     22 dB Channel separation at 15 kHz     15 dB Frequency range at -3dB     Hz Frequency response     Hz -3dB/-2dB Tracking ability at 315 Hz at recommmende tracking force     90 μm Compliance, dynamic lateral     12 μm/m N Stylus type     Spherical Tracking force range     g ( mN) Tracking force recommended     3,0 g (30 mN) Recommended load capacitance   - Cartridge weight     18,5 g Replacement stylus unit     Digitrak 1 year limited guarantee For more info on this product please click here

Entry-level cartridge for all-purpose use New DJ? This entry-level cartridge is perfect for newcomers on the DJ scene who want to start  off with decent, but not too expensive equipment. The Pro S has a spherical diamond stylus which minimizes scratching and a solid cantilever which can survive hectic activity at the turntable. No matter what the application, the Pro S provides remarkable versatility for virtually any setting. The sound quality is absolutely not to worry about. The Pro S is a consistent performer and a fine all-arounder! Specifications: Output voltage at Hz, 5cm/sec.     5 mV Channel balance at 1kHz     2 dB Channel separation at 1kHz     20 dB Channel separation at 15 kHz     15 dB Frequency range at -3dB     Hz Frequency response     Hz +/- 2 dB Tracking ability at 315 Hz at recommmende tracking force     70 μm Compliance, dynamic lateral     7 μm/m N Stylus type    Spherical Stylus tip radius     R 26 μm Tracking force range     g ( mN) Tracking force recommended     4,0 g (40 mN) Tracking angle    20° Internal impedance, DC resistance     750 Ohm Internal inductance     450 mH Recommended load resistance     47 kOhm Recommended load capacitance     pF Cartridge weight     18,5 g Replacement stylus unit Pro S  For more info on this product please click here

A revolutionary new high performance cart for DJs! Exceptional tracking ability of 120 μm! The Ortofon-Serato S-120 represents a completely new way of constructing and designing cartridges. Its breakthrough patent pending technology has been designed to provide maximum freedom for DJ performance. An innovative technology, called asymmetric suspension, takes the cartridge performance to the next level. Its superior tracking force ensures the S-120 stays in the groove even under extreme live performance conditions. In addition, its design achieves an unprecedentedly low level of record wear, which helps protect your valuable vinyl. On top of this, the S-120 is capable of providing a level of sound quality never thought possible from a modern DJ cartridge. Specifications: Output voltage at Hz, 5cm/sec.      10 mV Channel balance at 1kHz     1,5 dB Channel separation at 1kHz     20 dB Channel separation at 15 kHz     15 dB Frequency range at -3dB     Hz Frequency response     Hz +3/- 2dB FIM distortion at recomm. tracking force DIN      Tracking ability at 315 Hz at recomm. tracking force     120 μm Compliance, dynamic lateral    11 μm/m N Stylus type     Spherical Stylus tip radius     R 18 μm Tracking force range     g ( mN) Tracking force recommended     4,0 g (40 mN) Internal impedance, DC resistance     Ohm Internal inductance   920 mh Recommended load resistance     47 kOhm Recommended load capacitance     pF Cartridge weight     g Replacement stylus unit     Ortofon-Serato S- year limited guarantee For more info on this product please click here

Vinyl-to-digital transcription cartridge. Very good sound quality! Growing demand for the ability to transcribe vinyl to digital formats has prompted the creation of the Arkiv - a cartridge specially designed to provide optimized sound quality specifically for recording purposes. The Arkiv boasts clear and accurate sound reproduction and remarkable stereo imaging, making it perfectly suited for sampling, transcription, and numerous other professional applications. The Arkiv ships with an elliptical stylus for more detailed sound reproduction and for extended high frequency responce. Specifications: Output voltage at Hz, 5cm/sec.     6 mV Channel balance at 1kHz     2 dB Channel separation at 1kHz     23 dB Channel separation at 15 kHz     15 dB Frequency range at -3dB     Hz Frequency response     Hz +/- 2 dB Tracking ability at 315 Hz at recommmende tracking force     80 μm Compliance, dynamic lateral     9 μm/m N Stylus type     Special Elliptical Stylus tip radius     r/R μm Tracking force range     g ( mN) Tracking force recommended     3,0 g (30 mN) Tracking angle     20° Internal impedance, DC resistance     750 Ohm Internal inductance     450 mH Recommended load resistance     47 kOhm Recommended load capacitance     pF Cartridge weight  18,5 g Replacement stylus unit     Arkiv 1 year limited guarantee For more info on this product please click here

Replacement Stylus for Concord NIGHTCLUB MKII Cartridge  For more info on this product please click here

Replacement Stylus for Concord Gold Cartridge  1 year limited guarantee For more info on this product please click here