Inverter battery charging

Buy Inverter Battery Charger (UPS) -2400VA (1440W) for R2,250.00

Buy Inverter Battery Charger (UPS) -2400VA (1440W) 24V for R2,250.00

Buy Battery Charger 6 Volts and 12 Volts in One Battery Charging Unit. Collections are allowed. for R795.00

Buy Battery Charger 6 Volts and 12 Volts in One Battery Charging Unit. Collections are allowed. for R495.00

Buy 2000W Pure Sine Wave Inverter with charging for R1,499.00

    Spinido 9450 Dji Phantom 4 Intelligent Battery Charging Dock, White; Product Description Instructions:1.Connecting to a power source: When the green indicator light is on, connect the standard phantom 4 battery charger to a power outlet.2. Connecting batteries: Insert the intelligent flight battery into the charging port to begin to charge, when a battery is fully charged, the battery indicator will automatically turn off, when three green lights of the batteries are off, all the three batteries are fully charged and the power will automatically cut off.3. Under normal circumstances, it usually take 4 hours or so to make 3 empty batteries be full of the need, and the specific charging time may be related to the battery power supply voltage and residual electricity.Notice:1.This device charges multiple batteries at a time but not at the same time. It will gives precedence to the battery that includes the largest remaining battery. All of the batteries will finish charge at the end.2.Compatible with dji phantom 4 battery dock.3. Phantom 4 battery and charging adapter are not included.Specification: - Battery capacity: 5350 mah- nominal voltage: 15.2 v- max charge voltage: 17.4 v- charger power: 5.7a, 17.5v. Humanized design- 100% protect your batteries during charging Unique intelligent automatic power cut-out design-no more wait for the charge progress Charge 3 batteries one by one- full of need will take 4 hours or so Aviation-grade plastics- make sure the charger dock is stable and resistance to fall Note: Made for phantom 4 battery and charging adapter are not included    

30Pcs Mini 1A Lithium Battery Charging Board Charger Module USB Interface Description: Charging method: linear charge 1% Charging current: 1A adjustable Charge accuracy: 1.5% Input voltage: 4.5V-5.5V Full charge voltage: 4.2V Charging indicator: Red charging green full charge Charging input interface: Mini USB Working temperature: -10°C to +85°C Reverse: NO Size: 25 x 19 x 10mm Note: Ampere meter can only be connected to 5V input end of the module. It is better that the charging current is 37% of the battery capacity. If you charge to the battery of 1000mAH, current of 400 is enough. The connection wire should not be too long. Make sure the connect point is good. If the input voltage is too high, like 5.2V, the current will be less than 1000mA, it is normal. It is protection function, Auto-substract the charging current to avoid burn damage to chip. Input reverse has no effect on the chip, but the output (battery terminals) reverse will burn chips. Applications: This module is used for single-or multi-section parallel lithium lithium rechargeable battery, charging from the USB port to take power. Package included: 30 x 1A lithium battery charging module

10Pcs Mini 1A Lithium Battery Charging Module Board With USB Interface Description: Charging method: linear charge 1% Charging current: 1A adjustable Charge accuracy: 1.5% Input voltage: 4.5V-5.5V Full charge voltage: 4.2V Charging indicator: Red charging green full charge Charging input interface: Mini USB Working temperature: -10C to +85C Reverse: NO Size: 25 x 19 x 10mm Note: Ampere meter can only be connected to 5V input end of the module. It is better that the charging current is 37% of the battery capacity. If you charge to the battery of 1000mAH, current of 400 is enough. The connection wire should not be too long. Make sure the connect point is good. If the input voltage is too high, like 5.2V, the current will be less than 1000mA, it is normal. It is protection function, Auto-substract the charging current to avoid burn damage to chip. Input reverse has no effect on the chip, but the output (battery terminals) reverse will burn chips. Applications: This module is used for single-or multi-section parallel lithium lithium rechargeable battery, charging from the USB port to take power. Package included: 10 x 1A lithium battery charging module

Buy Mecer 1200VA (720W) Inverter Battery Charger (UPS) - Intelligent Fan - Mecer for R2,169.80

Description:   On-board TP4056 Lithium charge management chip  On-board Mini USB head, can direct connect to PC USB charging This board can power by IN+ and IN- too Reserved TEMP pin connector, can as Lithium temperature detection Input voltage: 4V-8V output max charging current: 1000mA The D1 indicator lights when charging, and the D2 indicator lights when charging is complete PCB board size: 37.3 (mm) x15 (mm)   Package included:   5 x TP4056 1A Lithium Battery Charging Board

Buy 18650 Battery Charging Holder Charging Board TP4056 0.3A / 0.5A / 0.8A for R152.00

Description: 5A Constant LED Driver Battery Charging Module Voltmeter Ammeter Adjustable step-down module Specifications: Module Properties: non-isolated constant current and voltage module Rectification: non-synchronous rectification Conversion efficiency: 95% (the highest) Switching frequency: 300KHz Output ripple: 50mV (max) 20M bandwidth Load Regulation: ± 0.5% Voltage Regulation: ± 2.5% Operating Temperature: -40?ﾃto +85??br />Voltmeter Ammeter Measurement accuracy: 0.1% Refresh rate: about 200ms / times Display: 0.28"digital tube Current Range: 0A-5A Voltage range: 5V-30V Please connect right as the printed:"IN-,IN+,OUT-, OUT+", or the Module will be burned. Package included: 1 x Constant Current/Voltage Battery Charging Module Details pictures:

Buy XH-M601 12V Battery Charging Module Smart Charger Automatic Charging Power Outage Power Control Boar for R93.90

Buy 10PCS Lithium Battery Charging Module Set 5V 1A TP4056 Charging Modules + 5V 2A for R195.24

Buy XH-M601 12V Battery Charging Module Smart Charger Automatic Charging Power Outa for R195.24