Card board

Feature: Support 16bit 32KHz/44.1KHz/48KHz Support 2-channel analog output,S/PDIF output Dynamic range/signal-to-noise ratio: 98DB THD+N=0.006% USB interface support 1.0 specifications WIN XP/WIN 7/WIN 2000 free driver WIN 98SE need install driver Size: 55 x 50mm voltage: 5 V (USB interface) Distortion: THD+N: 0.006% (RL > 10 k) Distortion: THD+N: 0.025% (RL = 32) Signal-to-noise ratio: 98 dB Dynamic range: 98 dB Headphone output power: 12 mW (RL = 32) Package includes: 1 x Sound Card Decoder Board

SIM800L GPRS GSM Module Micro SIM Card Core Board Quad-band TTL Port for Arduino Use this GSM/GPRS to create a remote data link. Use our GlueStick antenna for better reception in remote locations. The antenna plugs into the module. Comes with a basic antenna that you can solder onto the module. Glue Stick Antenna is also available.  Feature Implementation Supply Voltage 3.4 - 4.4V Power Saving Sleep mode 0.7mA (AT+CFUN=0) Frequency Bands Quad-Band: GSM850, EGSM900, DCS1800, PCS1900 Transmitting Power Class 4 (2W) at GSM850, EGSM900 Class 1 (1W) at DCS1800, PCS1900 GPRS Connectivity GPRS Multi-Slot Class 12 (Default) GPRS Multi-Slot Class 1-12 (Option) Temperature Range -40 to +85 Degrees Celsius Storage Temperature -45 to +90 Degrees Celsius Data GPRS GPRS Data down-link transfer max: 85.6 kbps GPRS Data up-link transfer max: 85.6 kbps Coding Scheme: CS-1, CS-2, CS-3 and CS-4 PAP Protocol for PPP connect Integrate TCP/IP Protocol Support Packet Broadcast Control Channel (PBCCH) CSD Transmission Rates: 2.4, 4.8, 9.6, 14.4 kbps     This item is available in stock and is not drop shipped. This avoids delays, customs charges and extra VAT.

Buy 3 in 1 Mini PCI/PCI-E Card LPC PC Laptop Analyzer Tester Module Diagnostic Post Test Card Board for R125.00

FAST AFFORDABLE COURIER SHIPPING TO SOUTH AFRICA Features Can play a variety of music formats, support for OGG encoding real-time recording SPI interface, the control signal lines are led out A headphone and stereo output A microphone for recording A line_in input interface Power indicator 3.3V and 2.8V of LDO chip AMS-1117 on board, provides up to 800mA current A single power supply: +5 VDC 12.288 MHz crystal TF card slot Package included: 1 x MP3 Music VS1053B Shield Board With TF Card Slot MP3 Music VS1053B Shield Board With TF Card Slot Work With Arduino UNO MEGA MP3 Music VS1053B Shield Board With TF Card Slot Work With Arduino UNO MEGA MP3 Music VS1053B Shield Board With TF Card Slot Work With Arduino UNO MEGA

Functional Overview CPU Allwinner V3S, ARM Cortex-A7, up to 1.2GHz Memory and storage Integrated 64MB DDR2 Reserved SOP8 SPI Flash pad (customizable patch 8~32MB SPI Nor Flash, 128MB Nand Flash) Onboard half-slot TF card holder, can be started by TF display Universal 40P RGB LCD FPC Socket Can be directly inserted into the common 40P 4.3/5/7 inch screen (onboard backlight driver), through the adapter board can be inserted 50P 7/9 inch screen Support common 272x480, 480x800, 1024x600 and other resolutions On-board resistive touch screen chip supporting resistive screen Onboard RGB LED Communication Interface SDIO x2, can be used with the SDIO WiFi+BT module SPI x1, I2C x2, UART x3 100M Ether x1 (with EPHY) OTG USB x1 MIPI CSI x1 Other interface PWM x2 LRADC x1 Speakerx2 + Mic x1 Electrical characteristics Micro USB 5V power supply; 2.54mm pin 3.3V~5V power supply; 1.27mm stamp hole power supply Output 3.3V and 3.0V (AVCC), optional input RTC voltage 1GHz linux no-load running current 90~100mA, full load running current ~180mA Storage temperature -40~125°C, operating temperature -20~70°C Software function: Support linux 3.4 bsp kernel, linux 4.16 mainline kernel Support Qt, python and other common linux applications Size and weight Core board size 25.4x45.0mm Development board size 47.0x47.0mm Core board weight 5.0±0.1g Development board weight 14.5±0.5g Precautions start up Zeros requires the card to start (or solder SPI flash), only plug in the USB without any phenomenon System debug serial port UART0, specific position reference pin diagram USB interface OTG usb, power and communication Bottom debugging It is recommended to use usb to serial port small board to connect "U0T R" and "G 5V" Operating temperature -20~85??/span> Running current Running Linux no-load current is about 100mA, full load current is about 150~180mA, and LCD current is about 200~300mA. No card power-on current is about 50~60mA Reference info. (Can click for more detail): 1. Document 2. Github 3. BBS 4. Wiki 5. E-mail: support@sipeed.com Package Included: 1x Lichee pi board 1x Plug 2x Pins

PIC PIC16 PIC16F877A Development Board Core-Board Kit With 13 Modules Description: The PIC development board Open16F877A is based on PIC16F877A, with rich expansion interface, support all kinds of peripheral modules. Feature: Specification of PIC16F877A: Kernel: PIC 8-bit RISC Operating Frequency: 20MHz Max Operating Voltage: 2V ~ 5.5V Encapsulation: DIP40; I / O ports: 33; Flash: 14kB RAM: 368B EEPROM: 256B Interface: 1 x MSSP (SPI/I2C), 1 x A / E / UART, 2 x PWM, 8 x ADC Debugging & Download: ICSP AMS1117-3.3: 3.3V regulator device 16-bit I/O Port: of which 8bit for AD port 8-bit I/O Port: for 8-bit keypad module, motor control module, etc SPI Port: for Dataflash AT45DBXX, SD card, MP3, etc I2C Port: for I/O expansion chip PCF8574, EEPROM AT24CXX, etc 1-WIRE Port: for DS18B20, DS2401, etc UART Port: for RS232, RS485, USB TO UART, etc PS/2 Port: for PS/2 device keyboard, mouse, etc 2.2inch color LCD Port: SPI Character LCD Port: such as LCD1602 ICSP Port 5V DC Port Package included: 1 x Open16F877A Development Board 1 x USB Cable (mini) 1 x PL2303 USB UART Board (mini) 1 x 2.2inch 320 x 240 Touch LCD (A) 1 x AD Keypad 1 x FT245 USB FIFO Board (mini)(16I/O) 1 x AT45DBXX DataFlash Board (SPI) 1 x PCF8563 RTC Board (I2C) 1 x Micro SD Storage Board (SDIO/SPI)(not includes SD card) 1 x NRF24L01 RF Board (B)(SPI) 2Pcs 1 x DS18B20 (ONE WIRE) 1 x IR Remote Control 1 x LCD1602 (3.3V Blue)(Parallel) 1 x 8 SEG LED Board (16I/O) 1 x 8 Push Buttons (8I/O)

Description: Now, you can drive TFT LCD in a much faster speed using 84Mhz Ardiuno DUE. The shield is designed to fit two types of LCD: 1. 40pin version LCD which is commonly used in previous version of TFT Mega shield for Arduino MEGA 2560 2. 32pin version LCD which is commonly used in STM32 development board. (unsoldered) The shield route all the LCD data pins to port PC1-PC8 and PC12-19, control pins to PD0-PD3, this design can acheive high speed data transfer (three cycles per write strobe to the LCD) to maximize LCD display speed. The SPI interface (for SD or flash control) is route to the ISP header of arduino DUE, so that high speed SPI transfer with DMA can be achieved. The shield is compatible with Arduino DUE and the following LCD: 2.2" TFT LCD Module  (220x176) 2.8" TFT LCD Module  (320x240) 3.2" TFT LCD Module with Font IC (320x240) 3.2" High Resolution TFT LCD Module with Font IC (480x320) 3.5" TFT LCD Module with Font IC (480x320) (Full viewing angle IPS panel) 4.0" TFT LCD Module with Font IC (480x320) 4.3" TFT LCD Module with Font IC (480x272) 5.0" TFT LCD Module with Font IC (800x480) 7.0" TFT LCD Module with Font IC (800x480) Features: - Drive TFT LCD on arduino DUE by just plugging into arduino DUE main board, no flying wires - Compatible with 40-pin version LCD, which is commonly used in TFT Mega shield - Also comptabile with 32-pin version LCD, which is commonly used in STM32 development board - On board SD card slot with adjustable CS selection - On board SPI flash footprint with adjustable CS selection, for upgrade include Font IC to draw text to the LCD and also support SPIFlash library - LCD power 3.3V and 5V selectable through solder jumpers - LCD Backlight (LEDA+) 3.3V., 5V or PWM selectable through solder jumpers - Pins are routed to reduce CPU cycles, i.e. display speed is faster Package included: 1 x CTE TFT LCD / SD Card Shield For Arduino DUE

Feature: Onboard 2W mono amplifier (5V power supply up to 3W) can directly connected speakers (recommended with 4Ω3W speakers), 3.5mm gold-plated headphone jack can be accessed by headphones or external audio. With MicroUSB power supply interface, using mobile bank power or USB charger power supply, can also be used 3.7V lithium battery, USB 5V power supply. Support TF card (mobile phone memory card), U disk playback mode. With a speaker terminal without soldering, easy wiring. 1) Support MP3 format, power automatically play, led status turn to red. 2) Support U disk (tested with 32G), TF card (tested with 16G) playing mode, power default TF card mode, if the TF card does not exist automatically jump to U disk mode, and both devices are installed, you can manually set the playback mode, please refer to the key operation instructions. Key operation instructions: "Prev / V--" key: "short press" to switch "Previous" song, "long press" to switch "volume down" "Next / v ++" key: "short press" to switch "next song", "long press" to switch "volume increase" "P / P / Mode" key: "short press" to "play / pause" switch, "long press" for the U disk, TF card "mode" select "Repeat" key: "short press" for the "single / full song" cycle switch (no long press function) Note: 1. Long press time about 2S 2. If you use U disk mode, the recommended 5V power supply, some U disk does not support 3.7V power supply. Specifications: Power supply range: 3.7 - 5.5V Product size: 45mm * 36mm Package includes: 3 x MP3 Lossless Decoder Board

Feature:   Onboard 2W mono amplifier (5V power supply up to 3W) can directly connected speakers (recommended with 4Ω3W speakers), 3.5mm gold-plated headphone jack can be accessed by headphones or external audio. With MicroUSB power supply interface, using mobile bank power or USB charger power supply, can also be used 3.7V lithium battery, USB 5V power supply. Support TF card (mobile phone memory card), U disk playback mode. With a speaker terminal without soldering, easy wiring.   1) Support MP3 format, power automatically play, led status turn to red. 2) Support U disk (tested with 32G), TF card (tested with 16G) playing mode, power default TF card mode, if the TF card does not exist automatically jump to U disk mode, and both devices are installed, you can manually set the playback mode, please refer to the key operation instructions.   Key operation instructions:   "Prev / V--" key: "short press" to switch "Previous" song, "long press" to switch "volume down" "Next / v ++" key: "short press" to switch "next song", "long press" to switch "volume increase" "P / P / Mode" key: "short press" to "play / pause" switch, "long press" for the U disk, TF card "mode" select "Repeat" key: "short press" for the "single / full song" cycle switch (no long press function)   Note:   1. Long press time about 2S 2. If you use U disk mode, the recommended 5V power supply, some U disk does not support 3.7V power supply.   Specifications:   Power supply range: 3.7 - 5.5V Product size: 45mm * 36mm   Package includes:   5 x MP3 Lossless Decoder Board

FAST AFFORDABLE COURIER SHIPPING TO SOUTH AFRICA More informations: https://myosuploads3./products/20181029/20181029050819SKU122168.rar Features: The module (MicroSD Card Adapter) is a Micro SD card reader module, and the SPI interface via the file system driver, microcontroller system to complete the MicroSD card read and write files. Arduino users can directly use the Arduino IDE comes with an SD card to complete the library card initialization and read-write Module features are as follows: Support Micro SD Card (The level conversion circuit board that can interface level is 5V or 3.3V Power supply is 4.5V ~ 5.5V, 3.3V voltage regulator circuit board Communication interface is a standard SPI interface 4 M2 screw positioning holes for easy installation Size: 4.1 x 2.4cm Control Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground, VCC is the power supply, MISO, MOSI, SCK is the SPI bus, CS is the chip select signal pin 3.3V regulator circuit: LDO regulator output 3.3V as level converter chip, Micro SD card supply Level conversion circuit: Micro SD card into the direction of signals into 3.3V, MicroSD card toward the direction of the control interface MISO signal is also converted to 3.3V, general AVR microcontroller system can read the signal Micro SD card connector: It is a self-drilling card holder for easy insertion and removal of the card. Positioning holes: 4 M2 screws positioning hole diameter of 2.2mm, the module is easy to install positioning, to achieve inter-module combination Package included: 1 x Micro SD TF card module Micro TF Card Memory Shield Module SPI Micro Storage Card Adapter For Arduino Micro TF Card Memory Shield Module SPI Micro Storage Card Adapter For Arduino Micro TF Card Memory Shield Module SPI Micro Storage Card Adapter For Arduino

3Pcs Micro SD TF Card Memory Shield Module SPI Micro SD Adapter For Arduino Features: The module (MicroSD Card Adapter) is a Micro SD card reader module, and the SPI interface via the file system driver, microcontroller system to complete the MicroSD card read and write files. Arduino users can directly use the Arduino IDE comes with an SD card to complete the library card initialization and read-write Module features are as follows: Support Micro SD Card (The level conversion circuit board that can interface level is 5V or 3.3V Power supply is 4.5V ~ 5.5V, 3.3V voltage regulator circuit board Communication interface is a standard SPI interface 4 M2 screw positioning holes for easy installation Size: 4.1 x 2.4cm Control Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground, VCC is the power supply, MISO, MOSI, SCK is the SPI bus, CS is the chip select signal pin 3.3V regulator circuit: LDO regulator output 3.3V as level converter chip, Micro SD card supply Level conversion circuit: Micro SD card into the direction of signals into 3.3V, MicroSD card toward the direction of the control interface MISO signal is also converted to 3.3V, general AVR microcontroller system can read the signal Micro SD card connector: Since the bomb deck for easy card insertion and removal. Positioning holes: 4 M2 screws positioning hole diameter of 2.2mm, the module is easy to install positioning, to achieve inter-module combination Package included: 3 x Micro SD TF card module

10Pcs Micro SD TF Card Memory Shield Module SPI Micro SD Adapter For Arduino Features: The module (MicroSD Card Adapter) is a Micro SD card reader module, and the SPI interface via the file system driver, microcontroller system to complete the MicroSD card read and write files. Arduino users can directly use the Arduino IDE comes with an SD card to complete the library card initialization and read-write Module features are as follows: Support Micro SD Card (The level conversion circuit board that can interface level is 5V or 3.3V Power supply is 4.5V ~ 5.5V, 3.3V voltage regulator circuit board Communication interface is a standard SPI interface 4 M2 screw positioning holes for easy installation Size: 4.1 x 2.4cm Control Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground, VCC is the power supply, MISO, MOSI, SCK is the SPI bus, CS is the chip select signal pin 3.3V regulator circuit: LDO regulator output 3.3V as level converter chip, Micro SD card supply Level conversion circuit: Micro SD card into the direction of signals into 3.3V, MicroSD card toward the direction of the control interface MISO signal is also converted to 3.3V, general AVR microcontroller system can read the signal Micro SD card connector: Since the bomb deck for easy card insertion and removal. Positioning holes: 4 M2 screws positioning hole diameter of 2.2mm, the module is easy to install positioning, to achieve inter-module combination Package included: 10 x Micro SD TF card module

Features: The module (MicroSD Card Adapter) is a Micro SD card reader module, and the SPI interface via the file system driver, microcontroller system to complete the MicroSD card read and write files. Arduino users can directly use the Arduino IDE comes with an SD card to complete the library card initialization and read-write Module features are as follows: Support Micro SD Card (The level conversion circuit board that can interface level is 5V or 3.3V Power supply is 4.5V ~ 5.5V, 3.3V voltage regulator circuit board Communication interface is a standard SPI interface 4 M2 screw positioning holes for easy installation Size: 4.1 x 2.4cm Control Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground, VCC is the power supply, MISO, MOSI, SCK is the SPI bus, CS is the chip select signal pin 3.3V regulator circuit: LDO regulator output 3.3V as level converter chip, Micro SD card supply Level conversion circuit: Micro SD card into the direction of signals into 3.3V, MicroSD card toward the direction of the control interface MISO signal is also converted to 3.3V, general AVR microcontroller system can read the signal Micro SD card connector: Since the bomb deck for easy card insertion and removal. Positioning holes: 4 M2 screws positioning hole diameter of 2.2mm, the module is easy to install positioning, to achieve inter-module combination Package included: 20 x Micro SD TF card module

5Pcs Micro SD TF Card Memory Shield Module SPI Micro SD Adapter For Arduino Features: The module (MicroSD Card Adapter) is a Micro SD card reader module, and the SPI interface via the file system driver, microcontroller system to complete the MicroSD card read and write files. Arduino users can directly use the Arduino IDE comes with an SD card to complete the library card initialization and read-write Module features are as follows: Support Micro SD Card (The level conversion circuit board that can interface level is 5V or 3.3V Power supply is 4.5V ~ 5.5V, 3.3V voltage regulator circuit board Communication interface is a standard SPI interface 4 M2 screw positioning holes for easy installation Size: 4.1 x 2.4cm Control Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground, VCC is the power supply, MISO, MOSI, SCK is the SPI bus, CS is the chip select signal pin 3.3V regulator circuit: LDO regulator output 3.3V as level converter chip, Micro SD card supply Level conversion circuit: Micro SD card into the direction of signals into 3.3V, MicroSD card toward the direction of the control interface MISO signal is also converted to 3.3V, general AVR microcontroller system can read the signal Micro SD card connector: Since the bomb deck for easy card insertion and removal. Positioning holes: 4 M2 screws positioning hole diameter of 2.2mm, the module is easy to install positioning, to achieve inter-module combination Package included: 5 x Micro SD TF card module

Features: The module (MicroSD Card Adapter) is a Micro SD card reader module, and the SPI interface via the file system driver, microcontroller system to complete the MicroSD card read and write files. Arduino users can directly use the Arduino IDE comes with an SD card to complete the library card initialization and read-write Module features are as follows: Support Micro SD Card (The level conversion circuit board that can interface level is 5V or 3.3V Power supply is 4.5V ~ 5.5V, 3.3V voltage regulator circuit board Communication interface is a standard SPI interface 4 M2 screw positioning holes for easy installation Size: 4.1 x 2.4cm Control Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground, VCC is the power supply, MISO, MOSI, SCK is the SPI bus, CS is the chip select signal pin 3.3V regulator circuit: LDO regulator output 3.3V as level converter chip, Micro SD card supply Level conversion circuit: Micro SD card into the direction of signals into 3.3V, MicroSD card toward the direction of the control interface MISO signal is also converted to 3.3V, general AVR microcontroller system can read the signal Micro SD card connector: It is a self-drilling card holder for easy insertion and removal of the card. Positioning holes: 4 M2 screws positioning hole diameter of 2.2mm, the module is easy to install positioning, to achieve inter-module combination Package included: 20 x Micro SD TF card module

3pcs Bluetooth Audio Receiver Digital Amplifier Board With USB Port TF Card Slot Decoding Play Specification: - Audio input mode:      1.Bluetooth receiver      2.USB decoding play      3.TF card decoding play - Supporting play format: MP3, WMA, WAV, FLAC - Power supply: 5V DC (mobile phone charger can power small USB plug) - Preamp output can directly promote the headset, also can be connected to the use of rear stage power amplifier Package Included: 3 x Amplifier Board

Description: Mini HD 720P Wireless IP 100 Pixels P2P Camera Board Hidden Video Mic Module Camera Support 64G SD Card   Features: High-definition, practical, small volume. Using the latest generation of chip (HI3518E), improve the image quality and reduce power consumption, leading position in the industry.   Specification: Camera Sensor: 1 MP Lens: 3.6MM pinhole lens Angle: 89° Video resolution: 1280 x 720 Video Speed: Up to 30 fps Power Supply: 5V Consumption: 300mAh TF card: Max. 64G TF Card (Not included.) Internal storage: 80MB/30min Package includeds: 1 x Wireless Camera 1 x USB Cable 1 x USB Power Supply (Also come with an adapter according to your country~) 1 x English User Manual   Details pictures:  

Specification: Amplifier gain: 40dB Operating current: 135mA (5V) Supply voltage: DC 5V System impedance: 50 ohms Amplifier parameters indicators: Operating Frequency: 30-4000MHz Maximum output power: + 20dBm (100mW) @ 1dB compression point USB interface: pluggable USB, can be inserted directly into the computer USB connection to realize the audio external playback function Output interface: 3.5 stereo Headphone jack, the output analog signal can drive the headset directly, or use to the post grade amplifier Package included: 1 x PCM2704 USB audio sound card

Buy VS1053 VS1053B MP3 Module Development Board UNO Board with SD Card Slot Ogg Real-time Recording... for R419.00

Description: Type: Decoder Board Supply Voltage: DC 5V or 12V Ohm: 4-8Ohm Dual channel audio output Operating Temperature: -30 ~ 85 ??br />Power Supply: 3.7-5V lithium battery / 5V adapter(Below 5.5V) The decoding board with 5V amplifier, apply with speaker directly Support WAV, MP3 FOMATE Supprt U disk & TF Card Support power memory Application: MP3/MP4 Player Package included: 5 x 5V 12V 3W+3W mini MP3 decoder board 5 x Remote control

Buy Server Power Conversion Board to 6pin Adapter 12V Graphics Card Converter Board 9 6P+1 4P for R187.22

SIM5320E 3G Module GSM GPRS SMS Development Board With GPS PCB Antenna For Arduino Program provided: 1 Send a Chinese message 2 Send a English message 3 Make a phone call, hang up automatically after 1 minute 4 Specifies the content of the message received, control the LED OFF 5 Detection the module is registered to a network, whether to read SIM card, and send message 6 Through GPRS, connect to the specified server and send the specified data 7 Provide information of dormant power consumption at about 10 ma. Feature: Power Supply: DC 5V 1A or 1A above. Communication interface: A set of TTL level serial port, compatible with 5V, 3.3V microcontroller; A set of USB interface for direct connection to the computer debugging. GPS antenna interface: A set IPXmini antenna interface, the connection active GPS antenna. GMS antenna interface: A set IPXmini antenna interface, default PCB antenna. SIM card interface: Drawer SIM card interface. USB Interface: mini USB interface. Mic voice interface: For leads, the interface is a 2.54 * 4P single row of needle. Other interfaces: A set IIC interface, a set for controling the module opening and closing interface (the default automatic start). Indicator: A 0603 LED, for indicating the operating state of the module, a 0603 LED, for network status indication for the module. SIM5320E chip: Package includes: 1 x SIM5320E 3G Module 1 x 3G PCB antenna 1 x GPS antenna 1 x IPX-SMA cable

Buy 2.8 inch TFT LCD Display Shield + UNO R3 Board with TF Card Touch Pen USB Cable Kit For UNO Mega2560 for R565.00

Buy 3pcs Programmable Music Board For Greeting Card DIY Gifts 30secs 30S Key for R249.00

Buy Bluetooth Audio Receiver Decoder Board with USB TF card Slot Decoding Playback for R276.97

Buy 20pcs Programmable Music Board For Greeting Card DIY Gifts 30secs 30S Key Contr for R1,819.33

Buy GPS SHIELD BOARD W/ SD CARD SLOT AND AERIAL EB0072 / 190019 for R524.50

Buy Bluetooth Audio Receiver Decoder Board with USB TF card Slot Decoding Playback Preamp Output 5V Wire for R303.00

Feature: PCM2704 USB-DAC/ Sound card Size: 58 x 58 x 24mm USB interface with Coaxial, fiber optic and analog output. Voltage: 5 V (USB interface) Distortion: THD+N: 0.006% (RL > 10 kΩ) Distortion: THD+N: 0.025% (RL = 32 Ω) Signal-to-noise ratio: 98 dB Dynamic range: 98 dB Headphone output power: 12 mW (RL = 32 ?) Supports sampling rates: 16Bit 32k, 44.1k, 48k Note: 1. It is a sound card can work with rasperberry Pi 2. It has USB, FIBER, coaxial 3. Portable Package includes: 1 x PCM2704 USB-DAC/ Sound card with box