Cables degrees

Description Connector B: HDMIBrand Name: Ugreen Application: MultimediaFeature: HMDI1.4 Package: YesShielding: Braid Connector A: HDMIGender: Male-Female Bundle: Bundle 1Type: HDMI Cables Packing: Other    General Material plastic Form Color Black Quantity 1 pieces Other Features Length Other Connector HDMI Packing List Product

OVERVIEW Portable PA with clear trebles and thumping bass. The Triflex™ II is a 1000 Watt three piece, two-channel sound system, already tweaked and ready to go for sound reinforcement, DJ gigs, and various music playback duties. Consisting of a shared Subwoofer cabinet and a pair of Satellite speakers, the system has been pre-engineered for a balanced sound and a crisp, punchy presentation. The three-way effective performance that the system is capable of provides a clear sound at high output levels, with plenty of punchy bass. FEATURES 1000W Active Two-Channel Three-piece Speaker System One shared Subwoofer cabinet which houses the inputs and power amps Two two-way Satellite speakers with speaker pole stand adaptors Subwoofer has 15" woofer, with 500W peak available power Satellite speakers have 10" woofer, RX 14 1.4" compression driver tweeter 250W peak available power to each Satellite speaker Peavey's exclusive DDT™ compression on the Satellite power amps System comes with two 15 foot speaker cables Protective slipcover with cable storage pockets and built-in Velcro retaining straps Heavy-duty locking casters on Subwoofer cabinet for transport of system Satellite speakers nest on top of the Subwoofer, help ease transport Four-pin twist-lock connectors on amplifier outputs and Satellite inputs SPECIFICATIONS Triflex II 1000W Three-Piece, Two-Channel Sound System SUBWOOFER: Transducer complement: 1 x 15” woofer Nominal Impedance: 8 ohms Power Handling, Transducer: 350W Continuous, 700W Program Box tuning frequency (Fbox): 48 Hz Frequency Response, 1 meter on-axis, swept-sine in anechoic environment (thru system electronics): 40 Hz to 105 Hz Usable low frequency limit (-10 dB point): 34 Hz Sound Pressure Level, 1 Watt, 1 meter in /2 space environment: 102 dB Maximum Sound Pressure Level (1 meter, 1 / 2 space): 127 dB Weight: 98 lbs. (44.5 kg) Dimensions (H x W x D): 19.65” X 28.00” X 28.10” (Includes feet) (unit down on feet) 19.65” X 32.00” X 28.10” (Includes feet and casters) Height in Transport mode: 32.00” SATELLITE SPEAKERS: Transducer complement: Low Frequency Section: 1 x 10” woofer High Frequency Section: 1 x 1.4” titanium compression driver on a Quadratic Throat Waveguide™ with 75 degrees by 75 degrees coverage pattern Nominal Impedance: 4 Ohms Power Handling, Satellite System: 200W Continuous, 400W Program, 800W Peak Box tuning frequency (Fbox): 84 Hz Frequency Response, 1 meter on-axis, swept-sine in anechoic environment: 88 Hz to 20 kHz Sound Pressure Level, 1 Watt, 1 meter in 1/2 space environment: 101 dB Maximum Sound Pressure Level (1 meter, ½ space): 124 dB Weight: 24 lb Dimensions (H x W x D): 19.6” X 11.83” X 11.83” (Upright, Includes feet) COMPLETE SYSTEM: Active Crossover Frequency: 120 Hz, 24 dB/Octave Maximum Sound Pressure Level (1 meter, half-space): 129 dB Dimensions when in transport orientation, on casters (H x W x D): 43.00” X 20.37” X 23.54” (Includes all feet) Weight (Sub and Satellites Only): 146 lb Speaker Cables: Two 15 foot 16 ga. With 4-pin twist-lock connectors on each end. INTERNAL AMPLIFIER: Subwoofer Amp Power Output: 500W peak available power 250W continuous, into 8 ohms. Satellite Amps Power Output: 250W peak available power 125W continuous, into 4 ohms. Inputs (Line Level): Left channel XLR or 1/4” phone jack combo input (female) Right channel XLR or 1/4” phone jack combo input (female) Input Impedance: 20 k Ohms balanced, 10 k Ohms unbalanced (single-ended) Thru (Outputs, Line Level): Left channel XLR full-range output (male), Right channel XLR full-range output (male) Speaker Level Outputs: Left channel 4-pin twist-lock professional connector, Output Right channel 4-pin twist-lock professional connector Output CONTROLS: Master System Level (Left & Right Gain) Subwoofer Level Control, Ground Lift Switch, Power Switch (On rear of amp panel when the Subwoofer is in use position, with rubber feet on the floor) Nominal amplifier frequency response: +0, -2 dB from 10 Hz to 20 kHz Hum and noise: Greater than 90 dB below rated power DDT dynamic range: Greater than 18 dB THD: T

Miggo Agua Stormproof Backpack 85 When bad weather threatens, protect your camera gear with the Miggo Agua Stormproof Backpack 85 from miggo. The pack has a top compartment for personal items and a lower gear compartment with dividers for storing a DSLR with an attached 24-70mm f/2.8 zoom, small standard lens, 70-200mm f/2.8 zoom, flash unit and related accessories. The gear may be accessed from either side of the pack and from the top. To accomplish the main mission of protecting gear, the pack has an IPX3 storm-proof rating, water-repellent zippers, thermo-forming reinforced bottom, and double-layered construction with tarpaulin, neoprene, Lycra, and polyester materials.The backpack may be carried by the top handle or worn with the connecting shoulder straps and waist belt. Included with the pack is an S-shaped divider, additional divider, tripod strap, and a utility pouch for storing your memory cards, spare battery and cables. Rounding out the storage capabilities of the pack is an inner pocket for your lens cap and memory card. Photographers will appreciate the folding top flap that provides weather protection and quick access to gear. IPX3 rain-proof standard: Protected against spraying water - water spraying up to 60 degrees from vertical at 10L/minute at a pressure of 80-100 kN/m2 for 5 minutes Lower gear compartment features quick-access to gear from both sides Top-load compartment features built in organizer and 15.4" laptop slot Utility Pouch for memory cards, spare battery and cables Adjustable shoulder straps Height- adjusted sternum strap Detachable waist strap Tripod holder Top-load compartment's buckles featuring a locking system Water-repellant zippers Thermo-forming reinforced bottom SPECIFICATIONS Material  :Tarpaulin, neoprene, Lycra, polyester Type of Closure:  Zippers and buckles Carrying/Transport Options: Shoulder straps with connector IPX Rating IPX3 rain-proof standard: Protected against spraying water - water spraying up to 60 degrees from vertical at 10 L/minute at a pressure of 80-100 kN/m2 for 5 minutes Tripod Attachment: Tripod holder strap Waist Belt: Yes, detachable Interior Dimensions Lower Gear Compartment:  29 x 24 x 16 cm Exterior Dimensions:  31 x 49 x 19 cm Weight: 1.73 kg

Wrap around wires, cables and hoses for extreme heat protection Withstands 500 degrees F direct, continuous heat and 2000 degrees F radiant heat Pliable for tight bends Trim to desired length No need to remove wires and hoses with convenient hook and loop closure design The DEI Heat Shroud is made from a high temperature rated glass fiber fabric with an aluminized outer facing. Same as Heat Sheath but with the added convenience of a hook & loop closure design along the open edges. Without the need of removing one end of connected wires, cables and hoses, simply wrap Heat Shroud around whatever needs protection and close the edges.

Product Overview The Promate proLink.H1B is small and compact adapter, perfect for easy access to those awkward places where its really hard to reach the HDMI sockets. When space is limited, you often have to bend your HDMI cable, which can either damage them or limit their working life, leaving no stress on the cable. Perfect for mounted flat screen TV's or installations with little or no space. Supports HDMI technology with easy Plug & Play functionality Features •Multi-Angle HDMI Female to HDMI Adapter with Gold-Plated connectors •This right-angle swivel HDMI Adapter allows for 90 to 180 degrees swivel when in any HDMI input device. •Support full HD up to P •Portable size, easy to use and carry •Adjust 90 degrees through 180 degrees •Allows each HDMI connection in tight spaces like wall mounting HDTV •Prevents HDMI cables being bent out of shape •24k gold plated connectors for optimum signal transfer

Promate Prolink.H1B Multi-Angle HDMI Female to HDMI Adapter, Retail Box, 1 Year Warranty Multi-Angle HDMI Female to HDMI Adapter Product Overview The Promate proLink.H1B is small and compact adapter, perfect for easy access to those awkward places where its really hard to reach the HDMI sockets. When space is limited, you often have to bend your HDMI cable, which can either damage them or limit their working life, leaving no stress on the cable. Perfect for mounted flat screen TV's or installations with little or no space. Supports HDMI technology with easy Plug & Play functionality Features ¿Multi-Angle HDMI Female to HDMI Adapter with Gold-Plated connectors ¿This right-angle swivel HDMI Adapter allows for 90 to 180 degrees swivel when in any HDMI input device. ¿Support full HD up to 1080P ¿Portable size, easy to use and carry ¿Adjust 90 degrees through 180 degrees ¿Allows each HDMI connection in tight spaces like wall mounting HDTV ¿Prevents HDMI cables being bent out of shape ¿24k gold plated connectors for optimum signal transfer Specification ¿100% Open & Short Testing ¿Withstanding Voltage: DC 150V, 0.1 sec ¿Conductive Resistance: 2 Ohms (Max) ¿Insulation Resistance: 1M Ohms (Min) ¿Made From: ABS Plastic and Gold- Plated connectors Compatibility HDMI compatible Display and TV¿s With HDMI Ports.

Promate Prolink.H1B Multi-Angle HDMI Female to HDMI Adapter, Retail Box, 1 Year Warranty Multi-Angle HDMI Female to HDMI Adapter Product Overview The Promate proLink.H1B is small and compact adapter, perfect for easy access to those awkward places where its really hard to reach the HDMI sockets. When space is limited, you often have to bend your HDMI cable, which can either damage them or limit their working life, leaving no stress on the cable. Perfect for mounted flat screen TV's or installations with little or no space. Supports HDMI technology with easy Plug & Play functionality Features •Multi-Angle HDMI Female to HDMI Adapter with Gold-Plated connectors •This right-angle swivel HDMI Adapter allows for 90 to 180 degrees swivel when in any HDMI input device. •Support full HD up to 1080P •Portable size, easy to use and carry •Adjust 90 degrees through 180 degrees •Allows each HDMI connection in tight spaces like wall mounting HDTV •Prevents HDMI cables being bent out of shape •24k gold plated connectors for optimum signal transfer Specification •100% Open & Short Testing •Withstanding Voltage: DC 150V, 0.1 sec •Conductive Resistance: 2 Ohms (Max) •Insulation Resistance: 1M Ohms (Min) •Made From: ABS Plastic and Gold- Plated connectors Compatibility HDMI compatible Display and TV’s With HDMI Ports.

Play music from the headphone output of your Digital Audio Player into your Pre-Amp   AudioMinor cables are cryogenically treated (below -190 degrees centigrade) using liquid Nitrogen to align the metallic molecules within the cable to provide the highest quality audio throughput AudioMinor copper cables are tip to tip triple cryoed to ensure the ultimate performance       Cryogenic treatment provides denser and aligned molecular structure in metals.      Cables are also fitted with the highest qualityS witchcraft, Rean/Neutrik or ViaBlue golden connectors and soldered with Cardas Quad Eutectic solder Collection is allowed in JHB area, please make contact with us once the order is placed. For any heavy (+2kg) or large items (+2 cubic meters) please ask us for shipping costs IF you have any questions please make us of the Q&A function, we are here to help

AudioMinor cables are cryogenically treated (below -190 degrees centigrade) using liquid Nitrogen to align the metallic molecules within the cable to provide the highest quality audio throughput AudioMinor copper cables are tip to tip triple cryoed to ensure the ultimate performance       Cryogenic treatment provides denser and aligned molecular structure in metals.      Cables are also fitted with the highest qualityS witchcraft, Rean/Neutrik or ViaBlue golden connectors and soldered with Cardas Quad Eutectic solder Collection is allowed in JHB area, please make contact with us once the order is placed. For any heavy (+2kg) or large items (+2 cubic meters) please ask us for shipping costs IF you have any questions please make us of the Q&A function, we are here to help

Wireless Video Door Phone "SafeGuard" - PIR Motion Detection, 3.5 Inch Monitor, 300m Range, Photo and Video Function ELMN-J97 Wireless Video Door Phone with PIR Motion Detection, 3.5 Inch Monitor, 300m Range, Photo and Video Function and more – Secure your house easily. Making your life easy is the “SafeGuard” video door phone. When someone rings the door bell, the video camera will automatically transmit its feed to the wireless 3.5 Inch monitor and you’ll be able to see in an instance who is standing at your door. Being wireless, this set can be installed within minutes and requires no drilling or any long cables running through the house. Simply turn on the receiver and the camera for total home security. Answer your door from a distance through the intercom system and place the video monitor anywhere you want in the house. Having a range of up to 300 meters, the "SafeGuard” can be placed in the bedroom, kitchen, bathroom,… and taken throughout the whole house. Featuring a PIR motion detection sensor, the doorbell will automatically be triggered when someone is within a 2 meter range and when the doorbell is pressed, the video signal will automatically be transmitted to the monitors on which you will have the ability to record the video feed. A charging dock for the monitor is included and the doorbell can be charged using the included power adaptor. At a Glance... Wireless Video Door Phone Set Monitor and Camera Doorbell 300m Range Picture and Video Recording Function Charging Dock PIR Motion Detection Manufacturer Specifications General Resolution: 320x240 Wireless Protocol: 2.4GHz Maximum Video Transmission Range: 300 Meters PIR Motion Detection Range: 2 Meters Mic and Speaker Working Temperature: -10 to +50 Degrees Celsius Monitor Power Source: Battery or Power Adapter Camera Power Source: Battery or Power Adapter Monitor Battery Size: mAh Camera Battery Size: mAh Camera Usage Time: 3 Hours of Continuous Use Monitor Standby: 100 Hours Camera Standby: Hours Display Display Size: 3.5 Inch TFT Non Touchscreen Display Lens Image Sensor: 1/4 Inch Color CMOS Sensor Viewing Angle: 120 Degrees Night Vision LED Light: 2 White LEDs, Night Visibility up to 2 Meters Ports Mini USB (Monitor) Dimensions Monitor dimensions: 125x80x25mm (L x W x D) Camera dimensions: 135x75x30mm (L x W x D) Monitor weight: 143g Outdoor Camera weight: 117g Product Notes Nighttime viewing angle may change according to the lightning and environments Package Contents Door Carmera + Wireless Monitor 2x Power Adapters (Product Specific) Monitor Charging Dock (Product Specific) USB Cable (Product Specific) 2x Batteries (Product Specific) Screws (Product Specific) Wall Mount for Video Phone (Product Specific) Monitor Stand (Product Specific) Power Connection for Camera (Product Specific) User Manual (Product Specific)

Intelligent IP Cam Camera Onvif YY HD WiFi Audio Wireless IP Camera intelligent "all in one" Smart IP Camera Wifi HDP-2000IP such as wifi connection can support memory card slots, easy to install in places difficult of running cables or wires can not go. Wireless CCTV Smart IP Camera Wifi wifi YYP2P Dial HDP Horizontal: 355 degrees; vertical 120 degrees, for greater visibility. In addition, CCTV Wireless IP Camera Wifi Smart YYP2P has supported streamed on the web browser, there is a clear IP addresses makes management much simpler. Features YYP2P YOOSEE software offers easy installation Sleek, chic Convenient compact scroll 2-way conversation, wifi connection Dial 360 on your phone & computer

Welcome to the future. Step into the world of Virtual Reality, it is like nothing you’ve ever experienced. The SmrtTECH FiiT Virtual Reality Viewer through your mobile phone, lets you feel like you’ve just stepped into your favourite game or immersed yourself in a VR movie, or jumped to the other side of the world in a fun and affordable way. “ The best low-cost headset yet!” – gearbrain “FiiT VR viewer is close to perfect!” – Hypergrid Business Virtual reality in seconds  – Converts an iPhone, Android or Microsoft device into an immersive 3D experience.  Over 300 virtual reality apps on iTunes App Store and Google Play Store for you download. Smartphone compatibility  - Compatible  with Android, iPhone and Google devices with 4.0 to 6.5 inch screens. The system doesn't need to be tethered to any exterior hardware, as all processors to drive the 3D experience are already built-in in most smartphones, which means you have absolute freedom of movement and are not restricted by any cables. Field of View  - The FiiT VR has a field of view of 102 degrees. Most other Google Cardboard headsets are in the 80 to 96 degree range. Lightweight  - It's one of the lightest fully-enclosed headsets on the market today only weighing 263 grams. Adjustable lenses  – The FiiT VR Viewer fits over glasses. It also allows you to adjust the interpupillary distance (the space between the centre of each pupil). Adjusting this position, gives you the best view for VR. You can also shift the focal distance of each lens individually. Ready for augmented reality  – The FiiT VR Viewer has a translucent outside cover, so your smartphone camera can see out. You can use apps like Reality Hacker VR or Wizard Academy. Ease of use  – Simply open the faceplate with a simple latch and place Smartphone on shelf. No complicated mechanisms, easy to put in and remove. Innovative design  -  Very comfortable to wear, the FiiT VR Viewer has a removable foam pad for easy cleaning and comfort. It comes with adjustable straps, which keeps the headset firmly in place. Plus, there are openings on the sides for audio and other cables to charge you smartphone, and also to help with air circulation. Dimensions  - 194(L) x 117(W) x 127(H)mm  Check out all our products (please contact if you want to buy more than 1 products so we can relook at shipping charge):  SmrtTech Products  

Avantone - CK-40 Stereo Multi-Pattern FET Microphone The Avantone "Cabernet (C-series)" mics are designed to offer true professional performance. They will meet or surpass the performance and specifications of much higher priced mics. The Avantone CK-40 is truly a gorgeous looking and sounding microphone. The design, character and performance is comparable to some of the world's finest Stereo FET Mics...but at a fraction of their cost! Our rugged CK-40 microphone body and capsule assembly are precision machined of BRASS. Aesthetically, it features an elegant Cabernet Wine-Red finish, accented with polished nickel trim and grill. The Discreet Class A Low-Noise FET circuitry will yield pleasing professional results comparable to much more expensive designs. Any studio can proudly offer the stereo CK-40 as a group vocal mic, room mic, piano mic, or utility condenser due to its versatility...It exudes class visually as well as sonically. Manufactured using the finest materials yielding a very solid feel, superb structural integrity and rugged reliability. The versatile Avantone CK-40 Stereo Class A FET microphone features twin LARGE 35mm center-terminated pressure gradient transducers. Their close physical proximity places them in a tight vertical array to allow accurate stereo imaging without phase issues arising. The top capsule/grill assembly rotates UP TO 180 degrees relative to the lower capsule/grill assembly. This feature along with the multi-pattern independent selector choices allow for all stereo recording techniques to be utilized. (XY-Coincident / Blumlein, M-S) The 2 sets of pad, pattern select & LF rolloff switches independently control the capsules. (Front switches control the lower fixed grill/capsule while the rear switches control the upper rotating headgrill.) The 3 patterns allow the CK-40 to be used in a variety of situations including M-S recording. The -10dB attenuation switch can be engaged when miking very high SPL sources to keep from overloading the electronics. The 80Hz HIGH-PASS filter switch can be engaged to reduce rumble and to keep unwanted low frequencies from "muddying up" the track. The CK-40 operates on standard 48 volt phantom power and includes a 5-Pin mic cable that plugs into the included 1x2 stereo splitter box. Two standard XLR mic cables are then all that is required to connect to a phantom powered mic preamp/console channel. The included Custom Retro Shockmount is superb in allowing a precise positioning of the mic while inhibiting the transfer of unwanted vibrations up into the mic. This isolation allows for superior professional results. So many sonic and spatial options are available with this microphone and we encourage you to experiment and use your ears as the final judge for stereo panning spread, use of omni vs cardioid or whether utilizing M-S miking techniques will better serve your particular situation etc...

Includes: 2 x Batteries Charger Cables 10.2 Megapixel, D200 Digital SLR Delivers Outstanding Image Quality With Blazing Speed, Rugged Construction and Intelligent Features The D200 promises an extremely satisfying shooting experience, with a winning combination of quality, performance, construction and advanced system features. Employing a newly developed 10.2 effective megapixel Nikon DX Format CCD image sensor, the D200 captures images with remarkable resolution and clarity. Its sophisticated -pixel 3D Color Matrix Metering II system ensures ideal exposures while an advanced Nikon image processing engine renders images with superb clarity and smooth color gradations. The D200 reacts with lightning speed, powering-up in a mere 0.15 seconds, and firing in an imperceptible 50 millisecond shutter release lag time. It can shoot five frames per second with a drastically shortened viewfinder blackout time of just 105 milliseconds between shots. Its large, bright viewfinder offers 0.94x magnification for comfortable and precise composition while a new 2.5 inch LCD screen provides ultra-wide 170 degrees viewing angle from all directions. With an all new 11-area autofocus system, robust control of Nikon's i-TTL Creative Lighting System and advanced Wi-Fi image-transmission options, the D200 is a perfect fit for discriminating photographers and a natural choice for wedding, event and action photographers.

Newly developed 40mm aperture driver generates clean and clear audio output with increased bass response   Special sound-isolating "air chamber" on the bass reflex port helps eliminate background noise Lightweight and flexible polyamide resin headband and snug fitting ear cups ensure comfort even during prolonged use Soft, extremely comfortable low-resilienc urethane foam ear pads Earcups are designed to move vertically along the slider arms offering a total of 15 different positions, and the slider arms can be rotated up to 90 degrees in each direction The headband, earpads, housing, cushion and cables can be removed and replaced (parts sold separately) for greater longevity GENERAL SPECIFICATIONS Form: Fully enclosed dynamic stereo headphones Frequency Range: Hz Impedance: 40 ¿ Output Sound Pressure Level: 100 dB Maximum Output Sound Pressure Level: 120 dB Maximum Input: mW Unit Aperture: ¿ 40 mm dynamic type Connection Cord: 1.6 m stereo cable, 1.0 m curled cable (3.0 m when extended) Plug: ¿ 3.5 mm stereo mini plug Weight: 6.9 oz (not including cord) Accessories: ¿ 6.3 mm stereo adapter plug (screw-type), carry case, screwdriver for cord replacement

  UHD Action Camera               Wi-Fi Action Camera with Remote       Key Features...       This dual screen camera has a remote control so it is easy to start and stop recording WI-Fi connectivity lets you instantly share videos and photos with other devices without any cables     Manufacturer Specifications   General •Sensor: 12MP SONY IMX078 •Screen: 2 Inch Screen + 0.95 Inch Status Screen •Screen Resolution: 240x320 •Lens Angle: 170 Degrees •Image Format: JPEG •Video Format: MOV •Frequency: 50Hz/60Hz •Photos Resolution: 12M (4608x2592), 8M (3760x2120), 5M (2976x1672) •Video Resolution: 4K (3840x2160)/30fps, 2.7K (2704x1524)/30fps, 1080p (1920x1080)/60fps, 1080p (1920x1080)/30fps •Video Output Format: PAL, NTSC •White Balance •Quality: Fine, Normal, Economy •Sharpness: Strong, Normal, Soft •Color: Color, Black and White •ISO: Auto, 100, 200, 400 •Exposure: -2.0, -5/3, -4/3, -1.0, -2/3, -1/3, 0, +1/3, +2/3, +1.0, +4/3, +5/3, +2.0 •WDR •Anti-Shake •Night Scene •Timed: Close, 3s, 5s, 10s, 20s •Time-lapse: OFF, 100ms, 200ms, 500ms, 1s, 5s •Loop Recording: OFF, 3min, 5min, 10min •Capture Mode: Single, 2s, 5s, 10s •Screen Save: Off, 30sec, 1min, 3min •Auto Power Off: Close, 1min, 3min, 5min, 10min •Voice Broadcast •Audio: Built in Mic, Speaker (AAC) •WIFI Distance: 15 Meters •WIFI: IEEE 802.11 b/g/n •APP Name: Ez iCam (Scan and dowload APP for IOS 7 and Android 4.1)   Remote   •3 Meters Water Resistant •Battery: Built-in 3V CR2032 Button Cell •Remote Control Distance: 20 Meters Other   •Battery: 1050 mAh Li-polymer Battery •Battery Working Time: About 1.5 Hours •Charging Time: About 2 Hours •Battery Usage Time: About 1.5 Hours (1080P/30fps), 50 Minute (4K/30fps, 2.7K/30fps, 1080P/60fps) •Operating Temperature: 0 to 50 Degree Celsius •Operating Humidity: 20 to 70% RH •Storage Temperature: -10 to 70 Degree Celsius •Support Working as PC Camera •Water Proof Rating: IP68 (With waterproof case, 30 Meters underwater) Ports   •Micro USB •Mini HDMI •Micro SD Card        

 Bluetooth Transmitter + Receiver   Please check shipping information before placing an order   Key Features...   2 in 1 Bluetooth transmitter and receiver for all your audio devices Do away with cables thanks to Bluetooth 4.1 connectivity Rechargeable 350mAh battery brings hours or working time Supports two phone connections in receiver mode   Manufacturer Specifications   General   Bluetooth: 4.1, class II CSR BC8670 Frequency: 2.402GHz to 2.480GHz Battery: built-in 350mAh rechargeable lithium Receiver&Transmitter working time(AUX): up to 15hours Receiver&Transmitter working time(SPDIF): up to 12hours Charging time: about 2hours Bluetooth profile: RX:A2DP, AVRCP; TX:A2DP Working temperature: -10 to +55 Celsius Degrees Power: 5V DC, 300mA Support dual stream, support one transmitter connect two Bluetooth speakers or Headphones (use one CODEC at the same time) Support connecting with two mobile phones in receiver mode   Ports   DC IN/Micro USB SPDIF IN SPDIF OUT 3.5mm Audio   Dimensions   Main Product Dimensions: 60x60x17 mm (L x W x D) Main Product Weight: 39g   Package Contents   Transmitter/Receiver Fiber Optic Cable 3.5mm Audio Cable Micro USB Cable SPDIF Cable   User Manual                  

 Bluetooth Transmitter + Receiver   Please check shipping information before placing an order   Supplier currently out of stock, available again 27/07/2017   Key Features...   2 in 1 Bluetooth transmitter and receiver for all your audio devices Do away with cables thanks to Bluetooth 4.1 connectivity Rechargeable 350mAh battery brings hours or working time Supports two phone connections in receiver mode   Manufacturer Specifications   General   Bluetooth: 4.1, class II CSR BC8670 Frequency: 2.402GHz to 2.480GHz Battery: built-in 350mAh rechargeable lithium Receiver&Transmitter working time(AUX): up to 15hours Receiver&Transmitter working time(SPDIF): up to 12hours Charging time: about 2hours Bluetooth profile: RX:A2DP, AVRCP; TX:A2DP Working temperature: -10 to +55 Celsius Degrees Power: 5V DC, 300mA Support dual stream, support one transmitter connect two Bluetooth speakers or Headphones (use one CODEC at the same time) Support connecting with two mobile phones in receiver mode   Ports   DC IN/Micro USB SPDIF IN SPDIF OUT 3.5mm Audio   Dimensions   Main Product Dimensions: 60x60x17 mm (L x W x D) Main Product Weight: 39g   Package Contents   Transmitter/Receiver Fiber Optic Cable 3.5mm Audio Cable Micro USB Cable SPDIF Cable   User Manual                  

  **PLEASE VIEW ENTIRE PAGE TO AVOID MISSING ANY DETAILS BEFORE PURCHASE** WE HAVE 1000'S OF ITEMS AVAILABLE CLICK HERE TO VIEW OUR OTHER LISTINGS Features: Material: Cloth Hardness: 70 - 75 degrees Size:  22 x 17.6 x 6.3 cm / 8.66 x 6.93 x 2.48 inchs  (L) x (W) x (H)  (appr.) Made of cloth material, reusable, easy to clean and carry. Keep your camera and camera accessories safe and tidy in this protective case. One size of the bag is mesh, convenient for looking for the clothes what you want. It is designed to hold your camera, batteries, SD Card, housing doors, mounts and cables. Notice: Please allow 1- 3cm error due to manual measurement and make sure you do not mind before ordering. Please understand that colors may exist chromatic aberration as the different placement of pictures. Package Included:  1 x Camera Carry Case (camera and camera accessories not included)       VERY IMPORTANT (READ BEFORE YOU PURCHASE) All our items are imported from overseas directly to you. All shipments are sent with insurance and tracking for your peace of mind. Allow 20 to 40 working days for delivery. Please note your purchase may be subject to customs inspection and duties. If there are any customs related charges they are the responsibility of the buyer. We can not be held responsible for any delivery delays that are out of our control.  

 Yongnuo YN-622N-TX Wireless TTL Flash Controller/Transmitter + 1x YN-622N Flash Transceiver Kit for Nikon   Specifications: The YN-622N-TX transmitter acts as a master control unit to the popular YN-622N  I-TTL and Remote Manual transceivers, providing more functions and a far more user friendly built-in LCD user interface. You can use YN-622N-TX and YN-622N Transceiver as Flash Trigger system to fire flash. YN-622N-TX Features: 3 Groups (A/B/C) Mix TTL, Remote Manual, and SuperSync Groups Sync mode (front-curtain sync, rear-curtain sync, Hi-speed sync (Auto FP)) Max Sync. Speed: 1/8000s Trigger Interface: Hot shoe, PC Individual 1/3rd stop Manual Power and FEC adjustment Remote Flash Zoom in 3 groups, and Auto Zoom 2nd Curtain Sync, HSS, SuperSync USB port for Firmware Updates AF Assist Light Remote Shutter Release Function Dedicated Buttons for Fast Adjustments Battery Level Indicator 2.5mm shutter release interface (We have two cables, one is for N1, other is for N3) PC Interface (You can buy RF-602 PC/PC to connect it with your camera) 7 Channels Improved Stability and Transmission Speed SuperSync Manual Timing Adjustment by Group Flash Value Lock function (FVL) Modelling Flash & Red-Eye Reduction flash Settings Saved Automatically Up To 100M Range YN-622N Features: YN-622N i-TTL wireless transceiver is a high performance 2.4G wireless flash trigger designed for Nikon users. Different photographic effects can be produced through setting the flash at 360 degrees. It supports i-TTL and manual flash, front-curtain sync, rear- curtain sync and high-speed sync(Auto FP), the highest sync speed is 1/8000s*. It can remote change flash exposure compensation or flash output of each group, supports different flash modes. Supports the transmitter installed i-TTL flash, in addition, it supports the master unit on transmitter sets the parameters of each group. This product is a wireless transceiver design, the distance of remote control reaches 100M, supporting 7 wireless channels and A/B/C three groups, and with AF assist beam emitter function. Function: Compatible flash mode: I-TTL, Manual flash Compatible Shutter sync: front-curtain sync, rear- curtain sync and high-speed sync(HSS/FP), the highest sync speed is 1/8000s* Support remote set the parameters of flash through the transceiver (Remote Control Mode) Support E-TTL/Manual/Repeating flash mode mix using(Mix Control Mode) Support the flash installed on transmitter(on-top flash)and supports i-TTL function Support the use of master unit on transmitter sets the parameters of each group(Master Control Mode) Support FEC, FVL function Support modelling flash and red-eye reduction flash Support flash zooming (auto) Built-in AF assist beam emitter (AF Lamp) Settings saved automatically Compatible with Yongnuo/ Nikon series flashes Support PC port triggering strobe flashes PC port support front/rear curtain sync and high-speed sync(Super Sync)function Support single-contact of camera & flash triggering (max sync speed is 1/250s) YN622N-KIT  Suitable for (Camera): Nikon: D70 D70s D80 D90 D200 D300s D600 D700 D800 D3000 D3100 D3200 D5000 D5100 D5200 D5300 D7000 D7100 Flash compatible (i-TTL): (You should use it with YN-622N together) A: ETTL Flash: (It suport wireless remote control through camera menu) ---Nikon SB-910, SB-900, SB-800, SB-700, SB-600, SB-28, SB-27, SB-26, SB-25, SB-24 ---Yongnuo Flashes Nikon version: YN-568EX, YN-565EX, YN-500EX, YN-468II, YN-467II, YN-465 ---Other brand flashes working with Nikon system: Metz, Sunpak, Oloong, Triopo B: Other Flashes: (Not support TTL function or HSS) ---Yongnuo YN-560III, YN-560II, YN-560EX, YN-560, YN-460II, YN-460 ---Pentax AF-540 FGZ, AF-360 FGZ, AF-400 FT, AF-240 FT ---Sigma EF-500 DG Super, EF-500 DG ST, EF-430 ---Other brand flashes not for Nikon: Metz, Sunpak, Oloong, Triopo Package including: 1 x YN-622N-TX Controller 1 x YN-622N II Single Transceiver 1 x LS-2.5/N1 Shutter Connecting Cable 1 x LS-2.5/N3 Shutter Connecting Cable 2 x Manual in English I ONLY POST TO ADDRESSES IN SOUTH AFRICA - NO INTERNATIONAL SALES

!!!!!!!!!!!!! FREE SHIPPING !!!!!!!!!!!!!! on all orders over R300.00   Features: Wireless charge for smart phone under the QI-standard, easy to charge your phone without data cables, just put your phone on the charging plate. Magnetic Phone holder 360 degrees rotatable,  adjust best viewing angle. Fixed on the desk or the car dash board by adhesive tape. Stick the heat-resistant Nano sticker to surface of wireless charger. Use micro USB cable to charge wireless charger, the indicator flash red, charging your phone with the wireless charger within 3-8mm, indicator turn to blue. Support for iPhone X/8/8 PLUS, Samsung S6/S7/S8 and etc. Note: Please make sure your phone supports wireless charging before purchase, if not, please purchase wireless charger receiver to install inside the phone. Specifications: Type: Wireless Phone Charger Material: ABS Quantity: 1pc Color: Black Output/ Input Voltage: 4.75--6.0V Max Current: 2A max Protection Current: 3A Static State Current: 10-30mA Transmitting Power: 7.5W Receiver Distance: Within 3-8mm Efficiency: 76% Type Interface: Micro-USB interface Executive Standard: Qi 1.1(FOD Function removal) Working Temp.: -10-40 Centigrade Certification: CE, FCC, Rohs Holder Base Size: 2.8*2.9cm / 1.1*1.4"(D*H) Wireless Transmission Size: 5.7*1.6cm / 2.2*0.6" (D*H) Net Weight: 0.146kg / 5.2oz Package: 1*Holder Base 1*Wireless Charger 1*Double-face Adhesive Tape 2*Nano Sticker 1*Micro USB charging Cable 1*English User Manual 1*Package Box   click here to view all items  

Ikan PD-BA1-KIT BlackMagic Armor System Kit, PD Movie (Black) Product Description Minimalistic design for ease of use Unique underslung studio and upright hand held modes of operation Ergonomic and precise design for Black Magic Cinema and 4K camera Integrated Battery Provides power to Black magic camera for 4 hours of continuous shootingCustom-fit for the Black magic Cinema 2.5K and 4K Cameras, the BMD Armor System is an ergonomic rig with a streamlined design that integrates both power and control. The main body fits the camera like a glove, keeping all ports and buttons accessible and plugs neat. The integrated battery design keeps power and control cables out of the way. The built-in battery in the baseplate provides up to four hours continuous shooting power for the camera. The handles are securely attached to a bridge plate and feel sturdy enough to manage any weight added to the rig. The multi-control handgrips contain batteries to drive each of the focus, zoom, or aperture motors and have rosettes for mounting in multiple positions. Thumbwheels for lens control are smartly located in the handles. They have two modes for slow and standard speed control of the motors and the option to focus/zoom at both 216 and 360 degrees. One mode is better suited for zooming and the other for more precise focusing. With the BMC in place, the kit weighs 14.5 pounds. Optional add-on components are available. Our Guarantee to You We guarantee the utmost in Quality, Authenticity and Customer Satisfaction All our Items are Brand New and 100% Authentic with Original Box and Papers Price Beat or Match, if we can't (which is hardly ever), we will give you R150 off your next order with us. At these prices stocks are very limited, so order now to avoid disappointment Please view our other listings HERE Looking for something that we have not listed. Let us know - Will will get the best price for you

Features: Material: Cloth Hardness: 70 - 75 degrees Size:  22 x 17.6 x 6.3 cm / 8.66 x 6.93 x 2.48 inchs (L) x (W) x (H) (appr.) Made of cloth material, reusable, easy to clean and carry. Keep your camera and camera accessories safe and tidy in this protective case. One size of the bag is mesh, convenient for looking for the clothes what you want. It is designed to hold your camera, batteries, SD Card, housing doors, mounts and cables. Notice: Please allow 1- 3cm error due to manual measurement and make sure you do not mind before ordering. Please understand that colors may exist chromatic aberration as the different placement of pictures. Package Included: 1 x Camera Carry Case (camera and camera accessories not included)

Features: Material: Cloth Hardness: 70 - 75 degrees Size: 22 x 17.6 x 6.3 cm / 8.66 x 6.93 x 2.48 inchs (L) x (W) x (H) (appr.) Made of cloth material, reusable, easy to clean and carry. Keep your camera and camera accessories safe and tidy in this protective case. One size of the bag is mesh, convenient for looking for the clothes what you want. It is designed to hold your camera, batteries, SD Card, housing doors, mounts and cables. Notice: Please allow 1- 3cm error due to manual measurement and make sure you do not mind before ordering. Please understand that colors may exist chromatic aberration as the different placement of pictures. Package Included: 1 x Camera Carry Case (camera and camera accessories not included)